Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaSe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Real-Time Elemental and Isotopic Measurements of Molten Salt Systems through Laser-Induced Breakdown Spectroscopy

Molten salt reactors are an emerging advanced nuclear reactor concept in which the fuel is dissolved into the working fluid in the form of a high-temperature molten salt. The complex, mobile, and corrosive nature of this fluid presents a fundamental challenge for analytical measurements. Tracking species throughout the reactor is important for ensuring proper operation. This article presents laser-induced breakdown spectroscopy (LIBS) used to monitor the elemental composition of a molten salt and corresponding hydrogen isotopic shifts in real-time. A NaNO 3 –KNO 3 eutectic salt was saturated with protium and deuterium gases, then the effluent aerosol stream formed using an argon sparging vessel was monitored with LIBS. This modular LIBS system permitted several spectrometers to be used simultaneously to capture high-resolution isotopic shifts and provide broadband elemental coverage. Further, the results exhibit how LIBS can be used to understand salt–gas chemical and physical interactions such as diffusion. Furthermore, LIBS’ broad elemental coverage can provide greater insight into the chemical reactions within the salt vessel such as the formation of water vapor by monitoring hydrogen and oxygen signatures simultaneously. Ultimately, this study demonstrates the analytical possibilities of LIBS for real-time monitoring of isotopes and elemental composition in molten salt systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancing Selective Hydrofluorocarbon Greenhouse Gas Capture via Halogenation of Metal–Organic Frameworks

Hydrofluorocarbons (HFCs) are anthropogenically produced greenhouse gases with longer atmospheric lifetimes and higher global warming potentials than those of carbon dioxide. General strategies to abate their emissions from industrial point sources, such as via adsorptive capture, remain scarce. Herein, we uncover the key structure–property relationships that lead to strong binding of HFCs such as fluoroform (CHF 3 ) and difluoromethane (CH 2 F 2 ) in metal–organic frameworks (MOFs) under the low pressures relevant to flue gas scrubbing. Extensive gas sorption and computational studies support that the Zr-based microporous framework MOF-801-Br or HHU-2-Br (HHU = Heinrich-Heine-University Düsseldorf) strongly binds HFCs due to its synergistic combination of Zr-OH sites on the nodes and bromine sites on the linkers. As such, MOF-801-Br demonstrates a record-setting performance for separating CHF 3 from N 2 under dilute conditions. Our work highlights that the combination of multiple hydrogen-bonding sites in microporous MOFs represents a generalizable strategy for HFC capture, enabling their selective removal from industrial waste streams.

adsorption↗
DOE OSTI2025

Probing the Surface Chemistry of Lithium Nitridation

Chemical synthesis of Li 3 N through lithium nitridation has potential to advance rechargeable battery and nitrogen fixation technology. However, studies of the conditions for forming Li 3 N on the lithium surface via nitrogen gas exposure report contradictory findings, such as the spontaneous reaction of Li with pure N 2 , the impossibility of forming Li 3 N through pure Li and N 2 interaction, the requirement of trace H 2 O to catalyze the reaction, and evidence to the contrary. In this study, ambient pressure X-ray photoelectron spectroscopy (APXPS) was applied to evaluate the in situ chemical evolution of the lithium metal surface under nitrogen gas up to 800 mTorr. At pressures ≤10 mTorr, no Li 3 N was detected. At higher pressures, surface Li 3 N rapidly reacts with trace CO 2 . Additionally, because metallic lithium is readily oxidized by trace gases, the atomic nitrogen concentration of the lithium surface remains below 2%. When nitridation follows oxidation by O 2 gas, CO 2 gas, or H 2 O vapor, surface Li 3 N formation is inhibited. These results suggest that nitrogen gas can diffuse through the oxidized lithium metal surface to react with subsurface metallic lithium.

Binding energy↗
DOE OSTI2026

Multimodal Nanoscale Mapping of Local Structure and CO 2 Adsorption in Metal–Organic Frameworks

Diamine functionalization of the metal−organic framework Mg 2 (dobpdc) (dobpdc 4− = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) significantly enhances its selectivity for CO 2 capture from flue gases and air. The structure and CO 2 capacity of such materials are typically assessed using bulk techniques that rely on averaging signal over large ensembles of unit cells, obscuring local heterogeneities, such as variations in CO 2 occupancy across individual nanocrystals. To resolve this limitation, we demonstrate a multimodal, nanoscale characterization of Mg 2 (dobpdc) appended with 1,3-diaminopropane. By employing recently developed characterization techniques at progressively smaller length scales, we uncover insights from correspondingly smaller populations of unit cells. First, we use parallel-beam 3D electron diffraction (3D ED) to identify a prominent expansion in lattice parameters upon desorption of CO 2 , as observed at the level of single nanocrystals. Second, we use convergent-probe 4D scanning transmission electron microscopy (4D-STEM) to quantify associated differences in lattice strain as a function of gas loading and diamine appending. These measurements sample small subvolumes within individual nanocrystals. Finally, we apply infrared scattering scanning near-field optical microscopy (IR s- SNOM) to confirm variable CO 2 chemisorption across adsorption sites at the surface of single nanocrystals. This multimodal, multiscale approach allows us to map heterogeneity within individual nanocrystals. Collectively, these findings emphasize the importance of local, nanoscale characterization of metal−organic frameworks in revealing previously unresolvable features that impact their performance.

Karstens, Sarah L. [University of California, Berk↗
DOE OSTI2026

Pressurized Gas-Driven Elemental Redistribution Enables Ultrastable PtNi Catalysts for Heavy-Duty Vehicles

Gas-driven element redistribution, characterized by the preferential enrichment of one element at the surface relative to the bulk, is frequently observed in multicomponent alloys. Using L1 0 -ordered PtNi as a model system, we reveal that gas pressure plays a critical role in governing adsorption-driven surface composition during annealing in reducing gases: low pressure favors Pt surface segregation, while high pressure facilitates Ni surface enrichment. In this study, we developed a high-pressure nitriding (HPN) strategy that modulates the surface structure and composition of PtNi catalysts. The resulting HPN-PtNi exhibits enhanced performance and durability in membrane electrode assemblies for heavy-duty fuel cell applications, maintaining a high current density of 1.19 A cm −2 at 0.7 V after 90,000 voltage cycles. Through a combination of experimental and theoretical analyses, we reveal that the HPN process forms additional stabilizing Ni−N bonds and induces elemental redistribution with Ni surface enrichment and a Ni-deficient Pt subsurface. These modifications alter the atomic coordination environment of the ordered PtNi phase. This work presents a generalizable strategy to design robust and high-performing Pt-based catalysts by controlling gas-pressure-driven elemental redistribution and dopant incorporation.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Toward Hydrogen Isotope Separations through Strong Hydrogen Adsorption at Open Copper(I) Sites in an Ultramicroporous Metal-Organic Framework

Metal-organic frameworks with coordinatively unsaturated metal sites (open metal sites) capable of engaging in orbital interactions with pi-acidic gases are of interest for enabling ambient-temperature gas separations, such as hydrogen isotope separations. In view of the weakly pi-acidic nature of H2, we sought to strengthen pi-backbonding-mediated H2 adsorption through pore confinement effects. Toward that end, we synthesized and characterized the ultramicroporous metal-organic framework CuxZn5-xCl4-yHz(bbta)3 (CuIZn-MFU-4; H2bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole), featuring pi-basic trigonal pyramidal CuI sites that reside within 7 A of one another at their closest. Gas adsorption measurements reveal an H2 adsorption enthalpy of -38 kJ/mol, exceeding that of the larger-pore analog (CuIZn-MFU-4l; -33 kJ/mol) and representing the strongest H2 adsorption yet achieved in a metal-organic framework. The stronger H2 adsorption in CuIZn-MFU-4 is attributed to a combination of pore confinement effects and the increased ..sigma..-accepting nature of the CuI sites caused by a more electron-withdrawing bbta2- linker, as supported by structural, spectroscopic, and computational evidence. With the strongest H2 adsorption, equilibrium isotope effects in CuIZn-MFU-4 lead to a D2/H2 selectivity (as estimated by ideal adsorbed solution theory) of 1.35 even at 298 K, approaching the values reported below 200 K for conventional porous materials.

08 HYDROGEN↗
DOE OSTI2026

Cyclodextrin-Derived Porous Liquids Enabled by In Situ Solvation Shell Formation

Porous liquids (PLs) represent a unique platform for molecular separations by combining permanent porosity with liquid-phase mobility. However, it remains a formidable challenge to construct and stabilize PLs with sub-5 Å pores using readily available porous host and liquid media. Here, we report the construction of cyclodextrin (CD)-derived PLs enabled by in situ solvation shell formation. The acid–base neutralization reaction between CD and an organic base was leveraged to generate a thin ionic solvation shell around the CD host, effectively liquefying CD and preventing its segregation in the liquid base medium while preserving accessible molecular-scale cavities. Spectroscopic analysis, neutron scattering, density functional theory calculations, and molecular dynamics simulations collectively confirm the structural evolution and existence of abundant internal porosity in PLs. The unique architectures of CD-derived PLs enable highly selective encapsulation of fluorinated alkanes and significantly enhanced uptake of inert gases. This facile and generalizable strategy enables construction of high-quality PLs with engineered ultramicroporosity to facilitate molecular separations.

Cavities↗
DOE OSTI2026

Interaction of Molecular Hydrogen on α-Pu at 300 K: Nucleation of Hydrides and Pu-Catalyzed Carbides

An α-Pu sample was studied in its “as-received” and “sputtered” state by both X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). Analysis of the “as-received” surface indicated significant carbon and oxygen, with oxygen signal pertaining to plutonium dioxide (PuO 2 ) and sesquioxide (Pu 2 O 3 ). The “sputtered” clean metal surface was then dosed with hydrogen (H 2 ) gas at 300 K and found to nucleate hydride species (PuH x ). Interestingly, H 2 was observed to be critical for nucleation of carbides (Pu x C y ) by acting as a catalyst for Pu’s reaction with background gases. Because Pu metal has a high affinity for oxygen, reoxidation occurred under UHV, forming Pu x O y and disrupting both PuH x and Pu x C y growth. Observations from the experiments were modeled for the α-Pu(020) surface, illustrating the ability of H 2 to readily dissociate onto sputtered and speciated surfaces at 300 K. The projected density of states from these calculations were compared to experiments, showing good agreement between the Pu 5f, 6d, and 7s states and the H 1s, O 2p, and C 2p valence states. Overall, the above results indicated that the formed hydride layer is unstable at 300 K in UHV conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Conversion of Polyolefin Waste to Liquid Alkanes with Ru-Based Catalysts under Mild Conditions

Chemical upcycling of waste polyolefins via hydrogenolysis offers unique opportunities for selective depolymerization compared to high temperature thermal deconstruction. Here, we demonstrate the hydrogenolysis of polyethylene into liquid alkanes under mild conditions using ruthenium nanoparticles supported on carbon (Ru/C). Reactivity studies on a model noctadecane substrate showed that Ru/C catalysts are highly active and selective for the hydrogenolysis of C(sp 3 )–C(sp 3 ) bonds at temperatures ranging from 200 to 250 °C. Under optimal conditions of 200 °C in 20 bar H 2 , polyethylene (average M w ~ 4000 Da) was converted into liquid n-alkanes with yields of up to 45% by mass after 16 h using a 5 wt % Ru/C catalyst with the remaining products comprising light alkane gases (C 1 –C 6 ). At 250 °C, nearly stoichiometric yields of CH 4 were obtained from polyethylene over the catalyst. The hydrogenolysis of long chain, low-density polyethylene (LDPE) and a postconsumer LDPE plastic bottle to produce C 7 –C 45 alkanes was also achieved over Ru/C, demonstrating the feasibility of this reaction for the valorization of realistic postconsumer plastic waste. By identifying Ru-based catalysts as a class of active materials for the hydrogenolysis of polyethylene, this study elucidates promising avenues for the valorization of plastic waste under mild conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Methods for Carbon Mass Closure in Polyolefin Hydrocracking

Heterogeneous catalytic hydrocracking of polyolefins is a promising approach for the processing of postconsumer plastics, but product quantification methods remain inconsistent across the literature. In systems that generate a large fraction of vapor-phase products, typical product capture methods can result in large carbon balance deficits, exceeding 50%, compromising reported yields and selectivities. Here, we identify the major sources of product loss and develop enhanced capture methods to improve the quantification accuracy. Seven supplemental techniques were evaluated, targeting either increased vapor recovery (by increasing the volatility or system volume) or enhanced retention in the liquid phase (by decreasing volatility). Among these, a flow collection approach using a continuous helium sweep and downstream gas sampling bag capture yielded the highest recovery, achieving a 96 ± 9.2% carbon balance closure. We show that the efficacy of these methods is strongly dependent on product distribution. In general, solvent addition was most effective when condensable species dominate the product distribution, while flow collection was preferred when both condensable species and light gases are present in high concentrations. These results highlight the need for method-specific workup strategies and demonstrate that no single protocol is universally optimal. We provide general guidelines for selecting and implementing robust product capture techniques, enabling accurate yield and selectivity determinations in polyolefin hydrocracking systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Using SF 6 and Xe to Monitor Gas Migration Through Explosion-Generated Fracture Networks

Here we describe a field study where tracer gas was injected into a subsurface cavity created by a small chemical explosion beneath the water table. The main objective of the study is to compare the migration of sulfur hexafluoride (SF 6 ) and xenon (Xe) through an explosion-generated fracture network and to study the influence of ground water on gas transport. A mixture of tracer gases (50% of SF 6 and 50% of Xe) was injected on 31 October 2018 and gas sampling continued until 8 November 2018. We observe similar trends in SF 6 and Xe concentrations at four ground surface sampling sites. The changes in the SF 6 /Xe ratios with time show that more SF 6 than Xe is observed during the barometric pressure lows when the absolute measured concentrations are highest. Conversely, the ratio SF 6 /Xe is less than 1 during the high-pressure intervals when absolute measured concentrations are low. The results of the experiment suggest that during barometric pressure lows the tracer is migrating to the surface primarily by advective gas phase transport, whereas during barometric pressure highs, advection is suppressed and near-surface evaporation of interstitial pore fluid with tracer dissolved in it becomes more important. Thus, the results of the experiment show that the gas concentrations at the surface are controlled by the combined effects of the gas dissolution into pore water and the barometric pressure fluctuations.

58 GEOSCIENCES↗
DOE OSTI2020

Observations of Greenhouse Gas Changes across Summer Frontal Boundaries in the Eastern United States

Our knowledge about synoptic-scale variations of atmospheric CO2 produced by interactions between mid-latitude cyclones and regional-scale surface fluxes remains limited by scarcity of observations. We synthesize observations of greenhouse gases (GHG) with respect to frontal passages to understand how GHG distributions change vertically and horizontally during a synoptic event. We use the airborne in-situ measurements of GHGs collected during the first Atmospheric Carbon and Transport–America (ACT) summer field campaign across three regions of the eastern US. We find that frontal structures are consistently and clearly associated with spatially coherent, significant changes in GHG composition. Warm sector CO2 mole fractions (henceforth, [CO2]) are significantly higher than those in the cold sector. The CO2 frontal differences (5-30 ppm) are largest in the atmospheric boundary layer (ABL) with smaller differences (3-5 ppm) in the free troposphere (FT). Bands of elevated CO2 (5-20 ppm enhancement compared to warm-sector mean [CO2]) repeatedly occurred in the ABL adjacent to the frontal boundary. Analyses of 84 vertical profiles reveal higher [CO2] in the FT than in the ABL in the cold-sector, the opposite pattern in the warm-sector. Average ABL-to-FT [CO2] differences are 12 ppm and -6 ppm in the warm and cold sectors, respectively. The same analysis for CH4 shows higher [CH4] in the ABL than in the FT in both warm and cold sectors with at least 30-ppb higher ABL-to-FT [CH4] differences in the warm-sector than in the cold-sector. The observational analyses presented here define new metrics for model evaluation of GHG transport.

Pal, Sandip↗
DOE OSTI2020

Atmospheric Research Over the Extended Western North Atlantic Ocean Region and North American East Coast: A Review of Past Work and Challenges Ahead

Decades of atmospheric research have focused on the extended Western North Atlantic Ocean (WNAO) region, including the East Coast of North America and the island of Bermuda, because of its unique location that offers accessibility, gradients in important atmospheric parameters, and a range of meteorological regimes leading to diverse conditions that are poorly understood. This work reviews decades of scientific investigations for the extended WNAO region. Approximately 40 combined field campaigns and long-term monitoring programs, in addition to 563 peer-reviewed publications between 1950 and 2019 have provided a firm foundation of knowledge for the extended WNAO region. Of particular importance in this region has been extensive work at the island of Bermuda that is host to important time series records of oceanic and atmospheric variables. Our review categorizes WNAO research into eight major categories, with some studies fitting into multiple categories (relative %): Aerosols (26%), Gases (23%), Development/Validation of Techniques, Models, and Retrievals (17%), Meteorology and Transport (10%), Air-Sea Interactions (9%), Wet Deposition (6%), Clouds/Storms (6%), and Aerosol-Cloud Interactions (3%). These extensive works have revealed a series of major knowledge gaps. For instance, a disproportionately low number of studies have been devoted to aerosol-cloud interactions, which is identified here as one of the most pressing research needs for the extended WNAO region. Recommendations for future research are provided in the categories highlighted above. Part 2 of this paper series will summarize major spatial and temporal features for the extended WNAO region.

Sorooshian, Armin↗
DOE OSTI2020

Changes in Physical Properties of Everglades Peat Soils Induced by Increased Salinity at the Laboratory Scale: Implications for Changes in Biogenic Gas Dynamics

Abstract Saltwater intrusion due to sea level rise is a major concern for the Florida Everglades because it may induce shifts in ecosystem productivity and physical soil properties. However, the effects of saline water intrusion into the current carbon gas dynamics of the Everglades (particularly in terms of biogenic gas production and emissions, i.e., CH 4 and CO 2 ) are still uncertain. In this work, we present a laboratory‐based study to simulate how sea level rise may alter the physical properties (i.e., hydraulic conductivity) of peat soils from the Everglades and consequently affect the accumulation and release of biogenic gases within the peat matrix. Peat monoliths collected from the Everglades were subjected to progressive increases in salinity from a NaCl solution, and changes to the biogenic gas dynamics regime were simultaneously monitored using a combination of time‐lapse ground‐penetrating radar measurements, manometers, time‐lapse photography, and gas traps. Physical changes to the peat matrix at each salinity interval were assessed using constant head permeameter tests. Consistent with previous research, results show that a progressive increase in salinity (from fresh to saltwater) results in (1) a progressive increase in hydraulic conductivity and (2) a progressive decrease in gas content within the peat matrix (i.e., production) and gas releases. This work has implications for better understanding the potential effects of saltwater intrusion into freshwater peatland systems in the Everglades, particularly in terms of carbon gas dynamics.

Sirianni, Matthew J.↗
DOE OSTI2021

InterCarb: A Community Effort to Improve Interlaboratory Standardization of the Carbonate Clumped Isotope Thermometer Using Carbonate Standards

Abstract Increased use and improved methodology of carbonate clumped isotope thermometry has greatly enhanced our ability to interrogate a suite of Earth‐system processes. However, interlaboratory discrepancies in quantifying carbonate clumped isotope (Δ 47 ) measurements persist, and their specific sources remain unclear. To address interlaboratory differences, we first provide consensus values from the clumped isotope community for four carbonate standards relative to heated and equilibrated gases with 1,819 individual analyses from 10 laboratories. Then we analyzed the four carbonate standards along with three additional standards, spanning a broad range of δ 47 and Δ 47 values, for a total of 5,329 analyses on 25 individual mass spectrometers from 22 different laboratories. Treating three of the materials as known standards and the other four as unknowns, we find that the use of carbonate reference materials is a robust method for standardization that yields interlaboratory discrepancies entirely consistent with intralaboratory analytical uncertainties. Carbonate reference materials, along with measurement and data processing practices described herein, provide the carbonate clumped isotope community with a robust approach to achieve interlaboratory agreement as we continue to use and improve this powerful geochemical tool. We propose that carbonate clumped isotope data normalized to the carbonate reference materials described in this publication should be reported as Δ 47 (I‐CDES) values for Intercarb‐Carbon Dioxide Equilibrium Scale.

58 GEOSCIENCES↗
DOE OSTI2020

Dynamics of Gas Bubbles From a Submarine Hydrocarbon Seep Within the Hydrate Stability Zone

We validate a new model for mass transfer and bubble transport for natural seeps on the continental margins using an integrated observation of a seep at 883 m in the Northern Gulf of Mexico. In the model, mass transfer is assumed to transition from clean to dirty bubble mass transfer rates following a characteristic hydrate formation time that depends on the initial bubble surface area and the hydrate subcooling. We show that buoyancy-induced upwelling is negligible for the bubble stream. We initialize the model using precise data observed at the seafloor and validate the model results to optical and acoustic measurements within the bubble stream. The model accurately predicts the acoustic attenuation of the bubble flare by lateral spreading and bubble shrinkage throughout the water column. In conclusion, the model shows that up to 99.4% by mass of the released gases from this seep dissolves into the ocean within the hydrate stability zone.

03 NATURAL GAS↗
DOE OSTI2020

Seasonal Dependent Impact of Ice Cloud Longwave Scattering on the Polar Climate

Most climate models neglect cloud longwave (LW) scattering because scattering is considered negligible compared to strong LW absorption by clouds and greenhouse gases. While this rationale is valid for simulating extrapolar regions, it is questionable for the polar regions, where the atmosphere is dry and hence has weak absorption, and ice clouds that have strong scattering capability frequently occur. Using the slab-ocean Community Earth System Model, we show that ice cloud LW scattering can warm winter surface air temperature by 0.8–1.8 K in the Arctic and 1.3–1.9 K in the Antarctic, while this warming becomes much weaker in polar summer. Such scattering effect cannot be correctly assessed when sea surface temperature and sea ice are prescribed as this effect is manifested through a surface-atmosphere coupling. Furthermore, cloud LW scattering is a necessity for the correct simulation of polar climate and surface radiation budget, especially in the winter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Climate Response to Emissions Reductions Due to COVID-19: Initial Results From CovidMIP

Many nations responded to the COVID-19 pandemic by restricting travel and other activities during 2020, resulting in temporarily reduced emissions of CO 2 , other greenhouse gases and ozone and aerosol precursors. We perform a coordinated Intercomparison, CovidMIP, of Earth System model simulations to assess the impact on climate of these emissions reductions. Eleven models performed multiple initial-condition ensembles to produce over 280 simulations spanning both initial condition and model structural uncertainty. We find model consensus on reduced aerosol amounts (particularly over East Asia) and associated increases in surface shortwave radiation levels. However, any impact on near-surface temperature or rainfall during 2020-2024 is extremely small and is not detectable in this initial analysis. Regional analyses on a finer scale, and closer attention to extremes (especially linked to changes in atmospheric composition and air quality) are required to test the impact of COVID-19-related emission reductions on near-term climate.

54 ENVIRONMENTAL SCIENCES↗