Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Filters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Evaluation of film type QX 807 (SO-368, Kodak Ektachrome MS, Estar thin base, with an equivalent Wratten 2A filter overcoat)

A color film with a sensitivity and color balance equal to SO-368, Kodak MS Ektachrome (Estar thin base) was required for use on the Apollo-Soyuz test project (ASTP). A Wratten 2A filter was required for use with the film to reduce short wavelength effects which frequently produce a blue color balance in aerial photographs. The background regarding a special emulsion which was produced with a 2A filter equivalent as an integral part of an SO-368 film manufactured by Eastman Kodak, the cost for production of the special film, and the results of a series of tests made within PTD to certify the film for ASTP use are documented. The tests conducted and documented were physical inspection, process compatibility, effective sensitivity, color balance, cross section analysis, resolution, spectral sensitivity, consistency of results, and picture sample analysis.

Lockwood, H. E.↗

A digital algorithm for spectral deconvolution with noise filtering and peak picking: NOFIPP-DECON

Noise-filtering, peak-picking deconvolution software incorporates multiple convoluted convolute integers and multiparameter optimization pattern search. The two theories are described and three aspects of the software package are discussed in detail. Noise-filtering deconvolution was applied to a number of experimental cases ranging from noisy, nondispersive X-ray analyzer data to very noisy photoelectric polarimeter data. Comparisons were made with published infrared data, and a man-machine interactive language has evolved for assisting in very difficult cases. A modified version of the program is being used for routine preprocessing of mass spectral and gas chromatographic data.

Edwards, T. R.↗

Filters

The role played by filters in providing failure free high pressure gaseous O2 system operation is defined. Filter design and maintenance considerations are given.

Source record↗

Sequential filtering applied to the determination of tracking station locations

The extended sequential filter has been applied to the problem of dynamically determining the geocentric coordinates of two laser satellite tracking stations. This filter provides significant advantages over the classical batch methods through (1) fewer iterations required for convergence, (2) wider radius of convergence, and (3) availability of the parameter estimate evolution. Processing the data sequentially readily identifies the data arcs required to minimize the effects of geopotential model errors. By means of the Smithsonian standard earth 2 and the Goddard earth model 1 geopotentials to reduce laser range observations of the Beacon Explorer-C satellite, it is demonstrated that a two-pass arc is optimal for estimating the height of one station and all coordinates of the second station while minimizing the effect of geopotential model error. These two-pass estimates are in good agreement with other determinations that utilize considerably more data as well as different satellites.

Schutz, B. E.↗

A note on optimal filtering in the presence of unknown biases

This note considers some aspects of the optimal filtering problem for linear processes in the presence of unknown biases in the input and the observations. It is proved via duality that the optimal filtering problem in the presence of an input bias is equivalent to a certain optimal regulator problem incorporating integral feedback. The question of observability of the augmented system used in the state and bias estimation is answered by deriving necessary and sufficient conditions when bias is present (1) in the input, (2) in the observations and (3) both in the input and the observations.

Joshi, S. M.↗

Band-elimination filter

Helical resonator is employed to produce stable, highly selective filter. Other features of filter include controlled bandwidth by cascading identical stages and stagger tuning, adjustable notch depth, good isolation between stages, gain set by proper choice of resistors, and elimination of spurious responses.

Shelton, G. B.↗

Counting digital filter

Overall design of filter combines radix converter with ADC in single functional unit that directly converts analog input to its negative binary representation. Four basic elements of filter are fixed register, shift register, counter, and accumulator.

Zohar, S.↗

Pinhole diffraction filter

Multistage diffraction filter consisting of coalined series of pinholes on parallel sheets can be used as nondegradable UV filter. Beam is attenuated as each pinhole diffracts radiation in controlled manner into divergent beam, and following pinhole accepts only small part of that beam.

Woodgate, B. E.↗

Tunable acoustical optical filter

Solid state filter with active crystal element increases sensitivity and resolution of passive and active spectrometers. Filter is capable of ranging through infrared and visible spectra, can be built as portable device for field use, and is suitable for ecological surveying, for pollution detection, and for pollutant classification.

Lane, A. L.↗

Signal enhancement filters

Designed to smooth digital output of radar tracking system, two filters prevent noise-induced inaccuracies and result in input/output noise-variance reduction on order of 10:1. One filter is special purpose device with limited arithmetic-logic unit, and other is true programmable microprocessor.

Killen, H. B.↗

The 121.75 MHz band pass filter

Prior to the ASTP joint flight it was observed during various tests on the USA's VHF/FM system, that the 121.75 MHz receiver unsquelched when exposed to certain RF power levels at a frequency of 142.417 MHz. Tests were conducted in an effort to arrive at a solution. Several recommendations were made but the most feasible was to insert a selective band pass filter in the transmit/receiver line of the VHF/FM transceiver. The tests were performed on the filter to determine the frequency response and rejection capabilities at 142.417 MHz.

Davis, R. J.↗

Kalman filter estimation of human pilot-model parameters

The parameters of a human pilot-model transfer function are estimated by applying the extended Kalman filter to the corresponding retarded differential-difference equations in the time domain. Use of computer-generated data indicates that most of the parameters, including the implicit time delay, may be reasonably estimated in this way. When applied to two sets of experimental data obtained from a closed-loop tracking task performed by a human, the Kalman filter generated diverging residuals for one of the measurement types, apparently because of model assumption errors. Application of a modified adaptive technique was found to overcome the divergence and to produce reasonable estimates of most of the parameters.

Schiess, J. R.↗

Solid state electro-optic color filter and iris

Test results obtained have confirmed the practicality of the solid state electro-optic filters as an optical control element in a television system. Neutral-density control range in excess of 1000:1 has been obtained on sample filters. Test results, measurements in a complete camera system, discussions of problem areas, analytical comparisons, and recommendations for future investigations are included.

Source record↗

Development of an optimal automatic control law and filter algorithm for steep glideslope capture and glideslope tracking

A digital automatic control law to capture a steep glideslope and track the glideslope to a specified altitude is developed for the longitudinal/vertical dynamics of a CTOL aircraft using modern estimation and control techniques. The control law uses a constant gain Kalman filter to process guidance information from the microwave landing system, and acceleration from body mounted accelerometer data. The filter outputs navigation data and wind velocity estimates which are used in controlling the aircraft. Results from a digital simulation of the aircraft dynamics and the control law are presented for various wind conditions.

Halyo, N.↗

Performance of a finite phase state bit-synchronization loop with and without sequential filters

A discrete phase state bit-synchronization loop is proposed for synchronization and detection of a binary nonreturn-to-zero (NRZ) process. The general loop model is developed for 11 and 17 phase states with optional sequential loop filter. Loop performance is considered in terms of the phase error density function, rms phase error, and mean time to bit slippage. It is shown that satisfactory loop performance can be achieved at -3 dB SNR through use of sequential loop filters.

Ransom, J. J.↗

On least-squares design of recursive digital filters

Time-domain methods for the design of recursive digital filters using a squared error criterion are compared with a frequency-domain technique. Levy's method, which has been used to estimate transfer functions of continuous-time systems is modified to obtain design equations for digital filters. A special case of Levy's method is shown to be essentially equivalent to the time-domain methods.

Shenoi, K.↗

On the design of recursive digital filters

A change of variables is described which transforms the problem of designing a recursive digital filter to that of approximation by a ratio of polynomials on a finite interval. Some analytic techniques for the design of low-pass filters are presented, illustrating the use of the transformation. Also considered are methods for the design of phase equalizers.

Shenoi, K.↗