Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLOW VELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Acoustics and Surface Pressure Measurements from Tandem Cylinder Configurations

Acoustic and unsteady surface pressure measurements from two cylinders in tandem configurations were acquired to study the effect of spacing, surface trip and freestream velocity on the radiated noise. The Reynolds number ranged from 1.15x10(exp 5) to 2.17x10(exp 5), and the cylinder spacing varied between 1.435 and 3.7 cylinder diameters. The acoustic and surface pressure spectral characteristics associated with the different flow regimes produced by the cylinders' wake interference were identified. The dependence of the Strouhal number, peak Sound Pressure Level and spanwise coherence on cylinder spacing and flow velocity was examined. Directivity measurements were performed to determine how well the dipole assumption for the radiation of vortex shedding noise holds for the largest and smallest cylinder spacing tested.

Hutcheson, Florence V.↗

Experimental and numerical investigation of the acoustic response of multi-slit Bunsen burners

Experimental and numerical techniques to characterize the response of premixed methane-air flames to acoustic waves are discussed and applied to a multi-slit Bunsen burner. The steady flame shape, flame front kinematics and flow field of acoustically exited flames, as well as the flame transfer function and matrix are computed. The numerical results are compared with experiments. The influence of changes in the mean flow velocity, mixture equivalence ratio, slit width and distance between the slits on the transfer function is studied, both numerically and experimentally. Good agreement is found which indicates the suitability of both the experimental and numerical approach and shows the importance of predicting the influence of the flow on the flame and vice versa. On the basis of the results obtained, the role and physical nature of convective flow structures, heat transfer between the flame and burner plate and interaction between adjacent flames are discussed. Suggestions for analytical models of premixed flame-acoustics interaction are formulated. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Survey of Magnetosheath Plasma Properties at Saturn and Inference of Upstream Flow Conditions

A new Cassini magnetosheath data set is introduced that is based on a comprehensive survey of intervals in which the observed magnetosheath flow was encompassed within the plasma analyzer field of view and for which the computed numerical moments are therefore expected to be accurate. The data extend from 2004 day 299 to 2012 day 151 and comprise 19,155 416-s measurements. In addition to the plasma ion moments (density, temperature, and flow velocity), merged values of the plasma electron density and temperature, the energetic particle pressure, and the magnetic field vector are included in the data set. Statistical properties of various magnetosheath parameters, including dependence on local time, are presented. The magnetosheath field and flow are found to be only weakly aligned, primarily because of a relatively large z-component of the magnetic field, attributable to the field being pulled out of the equatorial orientation by flows at higher latitudes. A new procedure for using magnetosheath properties to estimate the upstream solar wind speed is proposed and used to determine that the amount of electron heating at Saturn's high Mach-number bow shock is ~4% of the dissipated flow energy. The data set is available as an electronic supplement to this paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Low frequency electrostatic waves in weakly inhomogeneous magnetoplasma modeled by Lorentzian (kappa) distributions

Linear dispersion relations for electrostatic waves in spatially inhomogeneous, current-carrying anisotropic plasma, where the equilibrium particle velocity distributions are modeled by various Lorentzian (kappa) distributions and by well-known bi-Maxwellian distribution, are presented. Spatial inhomogeneities, assumed to be weak, include density gradients, temperature gradients, and gradients (shear) in the parallel (to the ambient magnetic field) flow velocities associated with the current. In order to illustrate the distinguishing features of the kappa distributions, stability properties of the low frequency (lower than ion cyclotron frequency) and long perpendicular wavelength (longer than ion gyroradius) modes are studied in detail, and the results are contrasted with those for the bi-Maxwellian distribution. Specific attention is given to the drift waves, the current-driven ion-acoustic waves in the presence of velocity shear, the velocity shear-driven ion-acoustic modes, and the ion temperature-gradient driven modes. Growth rates of the drift wave instability and the current-driven ion-acoustic instability are reduced from their values for bi-Maxwellian distribution due to larger ion Landau damping rates associated with the kappa distributions. For the same reason, excitation conditions for these two instabilities are more stringent in the case of the kappa distributions. Growth rates of the velocity shear-driven ion-acoustic instability and the ion temperature-gradient driven instability are reduced from their values for bi-Maxwellian distribution as a consequence of the reduced adiabatic response of the electrons to the electrostatic potential perturbation. Frequencies of the drift waves and the ion-acoustic waves are also reduced in kappa-distribution plasmas due to the reduced adiabatic response of the electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of ion velocity separation and ionization in multi-species plasma shocks

The ion velocity structure of a strong collisional shock front in a plasma with multiple ion species is directly probed in laser-driven shock-tube experiments. Thomson scattering of a 263.25 nm probe beam is used to diagnose ion composition, temperature, and flow velocity in strong shocks (M ~ 6) propagating through low-density (ρ ~ 0.1 mg/cc) plasmas composed of mixtures of hydrogen (98%) and neon (2%). Within the preheat region of the shock front, two velocity populations of ions are observed, a characteristic feature of strong plasma shocks. The ionization state of the Ne is observed to change within the shock front, demonstrating an ionization-timescale effect on the shock front structure. In conclusion, the forward-streaming proton feature is shown to be unexpectedly cool compared to predictions from ion Fokker-Planck simulations; the neon ionization gradient is evaluated as a possible cause.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bootstrap current and parallel ion velocity in imperfectly optimized stellarators

A novel derivation of the parallel ion velocity, and the bootstrap and Pfirsch-Schlüter currents in an imperfectly optimized (that is, almost omnigenous) stellarator magnetic field, \vec B, is presented. It is shown that, when the conventional radially local form of the drift kinetic equation is employed, the flow velocity and the bootstrap current acquire a spurious contribution proportional to ω /ν , where ω denotes the \vec E × \vec B rotation frequency (due to the radial electric field E ) and ν the collision frequency. This contribution is particularly large in the squareroot ν regime and at smaller collisionalities, where ω /ν > 1 , and is presumably present in most numerical calculations, but it disappears if a more accurate drift kinetic equation is used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a turbulence near-wall model and its application to separated and reattached flows

A numerical study is reported of flow and heat transfer in the separated and reattached flows created by an abrupt pipe expansion. In the study attention has been given primarily to the development of turbulence near-wall models based on the wall function. An efficient numerical method is also employed for the computation of high-velocity flows. The computed results are compared with experimental data obtained earlier. Generally, better results are obtained by employing the present near-wall models, and among them the three-layer model is superior to the two-layer one.

Amano, R. S.↗

Effects of Lewis Number on Temperatures of Spherical Diffusion Flames

Spherical diffusion flames supported on a porous sphere were studied numerically and experimentally. Experiments were performed in 2.2 s and 5.2 s microgravity facilities. Numerical results were obtained from a Chemkin-based program. The program simulates flow from a porous sphere into a quiescent environment, yields both steady-state and transient results, and accounts for optically thick gas-phase radiation. The low flow velocities and long residence times in these diffusion flames lead to enhanced radiative and diffusive effects. Despite similar adiabatic flame temperatures, the measured and predicted temperatures varied by as much as 700 K. The temperature reduction correlates with flame size but characteristic flow times and, importantly, Lewis number also influence temperature. The numerical results show that the ambient gas Lewis number would have a strong effect on flame temperature if the flames were steady and nonradiating. For example, a 10% decrease in Lewis number would increase the steady-state flame temperature by 200 K. However, for these transient, radiating flames the effect of Lewis number is small. Transient predictions of flame sizes are larger than those observed in microgravity experiments. Close agreement could not be obtained without either increasing the model s thermal and mass diffusion properties by 30% or reducing mass flow rate by 25%.

Santa, K. J.↗

Time Analysis on a Steam Condensation Jet

The time dependence of a steam bubble entering a water pool was measured for this experiment. The temperature of the water tank at the nozzle exit was 75 deg. C ± 5 deg. C. The experiment will focus on how the bubble changes its size through time for future experimental analysis concerning the heat transfer coefficient. The study focuses at different steam flow velocities approaching the water tank. The area of the steam bubble was measured using a high-speed camera to obtain the heat transfer coefficients. The region of interest is illuminated with a laser or a halogen lamp depending on the experiment. Calculating the rate at which the bubbles are created and condensed, will help obtain a better understanding of the energy transfer between the bubble and the water. The study of steam condensation is important due to its application on nuclear plants, heat exchangers, geothermal power plants and steam ejectors. Recently, more experiments have been performed and studied due to its high heat transfer rate. The results obtained in this experiment will be used to validate CFD models. This primary experimental report focuses on the steam bubble's time dependence; the same system will be used for future experiments concerning the heat transfer coefficient. In previous work done by Chun using only steam, the average heat transfer coefficient of direct contact condensation reported was in the range of 1.0-3.5 MW/m{sup 2} deg. C. He proposes an empirical correlation to predict the average heat transfer coefficients. The experimental data agrees with the empirical correlation within ± 30%. On a different experiment performed by Gulawani using a hot film anemometer on a steam condensation jet. The reported heat transfer coefficient for the vapor liquid interface varies between 0.1-4 MW/m{sup 2}-K. The nozzle diameter used during this experiment varied between 1-2 mm, and the velocity ranged between 286-304 m/s. Aya and Nariai reported three different heat transfer coefficients for direct contact condensation. They reported a heat transfer coefficient at chugging of 2*10{sup 6} W/m{sup 2}-K, at condensation oscillation of 10{sup 5} - 10{sup 6} W/m{sup 2}-K, and at the surface of stratified flow of 3*10{sup 3} - 3*10{sup 4} W/m{sup 2}-K. With steam and air mixture, a heat transfer coefficient relating the bubble average area was reported by Qu. He reported that the heat transfer coefficient decreased with the increase of the bubble diameter. The relation is time dependant and can be used to the transient analysis of the heat transfer. For this experiment, a set of images was obtained of a steam jet. The pictures were analyzed to obtained the time dependence of the steam bubble with time, and the rate of its condensation. A frequency of 20 Hz was calculated when the steam had a flow rate of 2.5 grams per second. The first result obtained for this experiment. In the future, more flow rates will be analyzed to obtain a relationship between the frequency of the bubbles and the flow rate of the steam. Eventually, this information will aid with the calculation of the heat transfer coefficient of the steam jet in a water pool.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Flame synthesis of multi-walled carbon nanotubes using CH{sub 4}-H{sub 2} fuel blends

Flame synthesis of carbon nanotubes (CNTs) has the potential to become a cost effective, energy efficient and scalable method for large-volume commercial synthesis. The in-flame concentration of key particulate inception intermediates, i.e., CH{sub 3}, C{sub 2}H{sub 2}, C{sub 3}H{sub 3}, and C{sub 5}H{sub 5} can be tailored using hydrogen fuel blends to optimize and enhance the yield of flame synthesis processes. Additionally, synthesis of CNTs using hydrogen fuel blends (coal or biomass derived gases) creates new opportunities for efficient coal utilization and by-product synergism of coal-fired power plants. This article reports an investigation on the synthesis of CNTs using H{sub 2} doped CH{sub 4} flames. For a baseline study, nanostructures formed in diffusion flames of 100% CH{sub 4} at different fuel flow rates have been analyzed. Initially the yield of nanomaterials increases with the increase in H{sub 2} doping in the fuel mixture. However, at higher H{sub 2} concentration (10%) and flow velocity (Jet Exit Reynolds number > 200), formation of nanostructures diminishes and H{sub 2}-CH{sub 4} flames produce amorphous carbon and soot particles. The maximum yield of nanostructures occurs at 95-5% CH{sub 4}-H{sub 2} fuel compositions and 8.37E-07m{sup 3}/s (corresponding Jet Exit Reynolds number=200). Raman analyses of the pristine samples show the existence of distinctive multi-walled carbon nanotube (MWNT) D and G bands at 1321cm{sup -1} and 1595cm{sup -1}, respectively. Infrared absorption measurements of vibrational line characteristics of CNTs also reveal the presence of C-H bonds.

01 COAL, LIGNITE, AND PEAT↗

Testing Small CPAS Parachutes Using HIVAS

The High Velocity Airflow System (HIVAS) facility at the Naval Air Warfare Center (NAWC) at China Lake was successfully used as an alternative to flight test to determine parachute drag performance of two small Capsule Parachute Assembly System (CPAS) canopies. A similar parachute with known performance was also tested as a control. Realtime computations of drag coefficient were unrealistically low. This is because HIVAS produces a non-uniform flow which rapidly decays from a high central core flow. Additional calibration runs were performed to characterize this flow assuming radial symmetry from the centerline. The flow field was used to post-process effective flow velocities at each throttle setting and parachute diameter using the definition of the momentum flux factor. Because one parachute had significant oscillations, additional calculations were required to estimate the projected flow at off-axis angles. The resulting drag data from HIVAS compared favorably to previously estimated parachute performance based on scaled data from analogous CPAS parachutes. The data will improve drag area distributions in the next version of the CPAS Model Memo.

Ray, Eric S.↗

Stabilization of Solitons Generated by a Supersonic Flow of Bose-Einstein Condensate Past an Obstacle

The stability of dark solitons generated by supersonic flow of a Bose-Einstein condensate past an obstacle is investigated. It is shown that in the reference frame attached to the obstacle a transition occurs at some critical value of the flow velocity from absolute instability of dark solitons to their convective instability. This leads to the decay of disturbances of solitons at a fixed distance from the obstacle and the formation of effectively stable dark solitons. This phenomenon explains the surprising stability of the flow picture that has been observed in numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computer modeling of events in the inner magnetosphere

The first effort at computer simulating the behavior of the inner magnetosphere during a substorm-type event on 19 September 1976 was completed. The computer model simulates many aspects of the behavior of the closed-field-line portion of the earth's magnetosphere, and the auroral and subauroral ionosphere. For these regions, the program self-consistently computes electric fields, electric currents, hot-plasma densities, plasma flow velocities and other parameters. Highlights of the results of our event simulation are presented. Predicted electric fields for several times during the event agree reasonably well with corresponding data from satellite S3-2. Detailed discussion is presented for a case of rapid subauroral flow that was observed on one S3-2 pass and is predicted by the computer runs. The computed global distribution of Birkeland current agrees reasonably well with the observations of Iijima and Potemra.

Harel, M.↗

Some NTF laser velocimeter installation and operation considerations

Two velocimeter techniques were considered as potential candidates for achieving the flow field angularity measurements. The first was the fringe laser Doppler velocimeter, (LDV). A great deal of experience was obtained with this approach at Langley and the literature is rich with papers describing many experimental applications and system performance details. That is, many velocity flow field measurements were conducted with the LDV but not with high resolution precise angularity measurements. The second candidate considered was the two-spot laser transit anemometer, (LTA). This approach was not as extensively used as the LDV technique, but literature does contain experimental applications and system performance details. Again, a lack of high resolution, high precision angularity measurements is noted for the LTA. The results of the study suggested that the LDV and LTA tests and other efforts did not reveal any fundamental problems that would suggest that laser velocimetry is not a viable diagnostic technique for the National Transonic Facility. However, there are a number of engineering problems that need to be solved.

Hunter, W. W., Jr.↗

Experimental evaluation of a flat wake theory for predicting rotor inflow-wake velocities

The theory for predicting helicopter inflow-wake velocities called flat wake theory was correlated with several sets of experimental data. The theory was developed by V. E. Baskin of the USSR, and a computer code known as DOWN was developed at Princeton University to implement the theory. The theory treats the wake geometry as rigid without interaction between induced velocities and wake structure. The wake structure is assumed to be a flat sheet of vorticity composed of trailing elements whose strength depends on the azimuthal and radial distributions of circulation on a rotor blade. The code predicts the three orthogonal components of flow velocity in the field surrounding the rotor. The predictions can be utilized in rotor performance and helicopter real-time flight-path simulation. The predictive capability of the coded version of flat wake theory provides vertical inflow patterns similar to experimental patterns.

Wilson, John C.↗

A standard particle sizer-velocimeter

A standard particle sizer-cum-velocimeter is described, which was designed and built for the purpose of providing a standard source of aerosols of known size-distribution, moving with a known velocity, for the purpose of calibrating the continuous wave (CW) CO2-Laser Doppler Velocimeters at Marshall Space Flight Center. The instrument is designed with the capabilities of: (1) monitoring the size-distribution of particles of diameters larger than 1.0 microns; (2) measuring flow velocities in the range 0.05 - 100.0 cm/sec; (3) photographing particles of diameters above 0.2 microns moving at slow speeds (approximately 0.1 cm/sec); (4) measuring the size-distribution of particles settling in quiet air (or convection velocities of less than 0.15 cm/sec); and (5) use in the laboratory or in the field.

Deepak, A.↗

An experimental study of combustion: The turbulent structure of a reacting shear layer formed at a rearward-facing step

A premixed propane-air flame is stabilized in a turbulent free shear layer formed at a rearward-facing step. The mean and rms averages of the turbulent velocity flow field were determined by LDV for both reacting and non-reacting flows. The reaching flow was visualized by high speed schlieren photography. Large scale structures dominate the reacting shear layer. The growth of the large scale structures is tied to the propagation of the flame. The linear growth rate of the reacting shear layer defined by the mean velocity profiles is unchanged by combustion but the virtual origin is shifted downstream. The reacting shear layer based on the mean velocity profiles is shifted toward the recirculation zone and the reattachments lengths are shortened by 30%.

Pitz, R. W.↗

Automatic Tip Vortex Core Profiling for Numerical Flow Simulations of Rotorcraft in Hover

An automated approach is presented that extracts visual and quantitative data from vortex cores produced by Navier-Stokes simulations of rotorcraft in hover mode. This approach extracts contiguous rotor tip vortex-core trajectories, cross-flow velocity profiles, and vortex-core diameter variation with wake age (azimuth angle). This automated approach is faster and more accurate than a conventional manual approach. Moreover, this new approach allows for an efficient way to quantitatively compare vortex-core profiles from different flow simulations, e.g., grid resolution studies, and validate computed results with experimental data

Kao, David L.↗