Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Nonlocal Order in Gapless Systems: Entanglement Spectrum in Spin Chains

We show that the entanglement spectrum can be used to define non-local order in gapless spin systems. We find a gap that fully separates a series of generic, high 'entanglement energy' levels, from a flat band of levels with specific multiplicities defining the ground state, and remains finite in the thermodynamic limit. We pick the appropriate set of quantum numbers and partition the system in this space, corresponding to a nonlocal real-space cut. Despite the Laughlin state being bulk gapped while the antiferromagnetic spin chain state is bulk gapless, we show that the S=(1/2) Heisenberg antiferromagnet in one dimension has an entanglement spectrum almost identical to that of the Laughlin Fractional Quantum Hall state in two dimensions, revealing the similar field theory of their low-energy bulk and edge excitations, respectively. We also discuss the dimerization transition from entanglement gap scaling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deep Centers at the Interface in In{sub 2x}Ga{sub 2(1–x)}Te{sub 3}/InAs and In{sub 2}Te{sub 3}/InAs Heterostructures

The methods of admittance, I–V, and C–V characteristics are used to investigate In{sub 2x}Ga{sub 2(1–x)}Te{sub 3}/InAs and In{sub 2}Te{sub 3}/InAs heterostructures obtained by the technologies of quasi-closed volume and deposition. The spectrum of the distribution of local energy levels at the interface is established. A new acceptor center with an energy of 0.36 eV alongside the known donor level with an energy of 0.5 eV is found by the method of admittance. The acceptor-center concentration N{sub t} depends on the method of fabrication and technological modes. The kinetics of generation–recombination processes in the temperature range of 70–400 K does not affect the insulating properties of the In{sub 2}Te{sub 3} or In{sub 2x}Ga{sub 2(1–x)}Te{sub 3} (x ≈ 0.65) dielectric layer; therefore, the possibility of their use as heterostructures for field-effect transistors is demonstrated.

36 MATERIALS SCIENCE↗

Analysis of femtosecond stimulated Raman spectroscopy of excited-state evolution in bacteriorhodopsin

The dispersive lines observed in time-resolved femtosecond stimulated Raman spectroscopy (FSRS), using a pair of 809 nm, 3 ps Raman pump, and 840-960 nm ultrashort probe pulse, for the first 500 fs photoisomerization dynamics in the excited state of bacteriorhodopsin, BR* (S{sub 1}), created by a prior 500 nm, 35 fs actinic pump pulse, have previously been attributed to Raman initiated by nonlinear emission (RINE). We used four-wave mixing energy level diagrams to describe the FSRS process, which include RINE as a subset, and a 29-mode harmonic oscillator model for BR{sub 568} in the calculations. Our calculations showed that FSRS of BR{sup *} effectively occurs from the ground vibrational state of each of the observed 800-1800 cm{sup -1} modes of S{sub 1}. The lifetime on S{sub 1} determines the linewidth and decay of the dispersive lines, and is estimated to be {approx}600 fs, comparable to the stimulated emission decay time. The FSRS dipole couplings are from the ground vibrational state of S{sub 1} to high energy vibrational states on BR (S{sub 0}), and we place a fast decay lifetime of {approx}100 fs on S{sub 0} which can be attributed to the correlation function from the many unobserved low frequency modes. The FSRS dispersive lines are shown to be due to the inverse Raman scattering term with |0><1| vibrational coherence on the S{sub 1} surface, and are not due to RINE with vibrational coherence on the S{sub 0} surface. Our calculations show that the RINE process gives rise to broad featureless spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗

Multimodal emissions from Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate glass: Upconversion, downshifting and quantum cutting

This paper reports the optical properties of Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method. The absorption spectrum of the Yb{sup 3+} doped LB glass contains intense NIR band centered at 976 nm due to {sup 2}F{sub 7/2}→{sup 2}F{sub 5/2} transition. The emission spectra of the prepared glasses have been monitored on excitation with 266, 355 and 976 nm. The Yb{sup 3+} doped glass emits a broad NIR band centered at 976 nm whereas the Tb{sup 3+} doped glass gives off visible bands on excitations with 266 and 355 nm. When the Tb{sup 3+} and Yb{sup 3+} ions are co-doped together, the emission intensity in the visible region decreases whereas it increases in the NIR region significantly. The increase in the emission intensity in the NIR region is due to efficient cooperative energy transfer (CET) from Tb{sup 3+} to Yb{sup 3+} ions. The quantum cutting efficiency for Tb{sup 3+}/Yb{sup 3+} co-doped glass has been calculated and compared for 266 and 355 nm excitations. The quantum cutting efficiency is larger for 355 nm excitation (137%). The Tb{sup 3+}/Yb{sup 3+} co-doped LB glass also emits upconverted visible bands on excitation with 976 nm. The mechanisms involved in the energy transfer have been discussed using schematic energy level diagram. The Tb{sup 3+}/Yb{sup 3+} co-doped LB glass may be used in the optical devices and in solar cell for solar spectral conversion and behaves as a multi-modal photo-luminescent material. - Graphical abstract: The Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method emits upconverted visible emissions through upconversion CET from Yb{sup 3+} to Tb{sup 3+} ions and quantum cutting emissions through downconversion CET from Tb{sup 3+} to Yb{sup 3+} ions. Therefore, the Tb{sup 3+}/Yb{sup 3+} co-doped LB glass may find applications in optical devices and solar cell and behaves as a multi-modal photo-luminescent material. - Highlights: • The Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method. • The Tb{sup 3+}/Yb{sup 3+} co-doped glass gives QC emissions upon 266 and 355 nm excitations. • The Tb{sup 3+}/Yb{sup 3+} co-doped glass also emits intense green color on excitation with 976 nm. • The quantum cutting efficiency is larger for 355 nm excitation (137%). • The Tb{sup 3+}/Yb{sup 3+} co-doped glass may be used in solar cell and display devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exact yrast spectra of cold atoms on a ring

We propose a methodology to construct excited states with a fixed angular momentum, namely, ''yrast excited states'' of finite-size one-dimensional bosonic systems with periodic boundary conditions. The excitation energies such as the first yrast excited energy are calculated through the system-size asymptotic expansion and expressed analytically by dressed energy. Interestingly, they are grouped into sets of almost degenerate energy levels. The low-lying excitation spectrum near the yrast state is consistent with the U(1) conformal field theories if the total angular momentum is given by an integral multiple of particle number; i.e., if the system is supercurrent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energetics analysis of the global circulation during the special observation periods of FGGE

A global energetics analysis is presented for the FGGE SOP-1 and SOP-2 with ECMWF and GFDL data sets. Both global integral properties and spectral characteristics are examined. There is a large discrepancy between the present FGGE analysis and previously available estimates concerning the level of available potential energy and kinetic energy. This discrepancy is attributable to an earlier restriction of data coverage. There is a significant seasonal difference in the energy reservoir of the Northern Hemisphere, whereas the diference is minor in the Southern Hemisphere. This leads to a seasonal contrast of the globally integrated energy budget which comes mostly from the Northern Hemisphere. Both the global energy level and the intensity of the general circulation are more pronounced during SOP-1 than during SOP-2. One major focus of attention in this study is an energetics comparison of ECMWF and GFDL data sets. There is a twofold difference in the intensity of the general circulation as measured with these two data sets. The energetics diagnosis indicates that the operational modes of the general circulation as described by these two data sets also differ considerably. The contrasts between SOP-1 and SOP-2 and between the ECMWF and GFDL versions of the data sets are apparent in the pattern of energy flow in the wavenumber domain.

Kung, E. C.↗

Nondegenerate four-wave mixing in rubidium vapor: Transient regime

We investigate the transient response of the generated light from four-wave mixing (FWM) in the diamond configuration using a step-down field excitation. The transients show fast decay times and oscillations that depend on the detunings and intensities of the fields. A simplified model taking into account the thermal motion of the atoms, propagation, absorption, and dispersion effects shows qualitative agreement with the experimental observations with the energy levels in rubidium (5S{sub 1/2}, 5P{sub 1/2}, 5P{sub 3/2}, and 6S{sub 1/2}). The atomic polarization comes from all the contributions of different velocity classes of atoms in the ensemble modifying dramatically the total transient behavior of the light from FWM.

74 ATOMIC AND MOLECULAR PHYSICS↗

Luminescent properties of bismuth centres in aluminosilicate optical fibres

The shape and spectral position of the luminescence bands of bismuth-doped aluminosilicate glass fibres are shown to depend on excitation power and wavelength. This indicates that the red and IR luminescence bands are composed of several components. The absorption and radiative transitions involved are identified, and a diagram of energy levels and transitions is obtained for four modifications of a bismuth centre in different environments in the aluminosilicate glass network. The effect of local environment on the optical properties of the bismuth centres is examined. (optical fibres and waveguides)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measuring the Economic Impacts of Federal Investments in Research

Measuring the Economic Impacts of Federal Investments in Research evaluates approaches to measuring the returns on federal research investments. This report identifies new methodologies and metrics that can be developed and used for assessing returns on research across a wide range of fields (biomedical, information technology, energy, agriculture, environment, and other biological and physical sciences, etc.), while using one or more background papers that review current methodologies as a starting point for the discussion. It focuses on tools that are able to exploit available data in the relatively near term rather than on methodologies that may require substantial new data collection. Over the last several years, there has been a growing interest in policy circles in identifying the payoffs from federal agency research investments, especially in terms of economic growth, competitiveness, and jobs. The extraordinary increase in research expenditures under the American Recovery and Reinvestment Act (ARRA) of 2009 and the President's commitment to science and technology (S&T) funding increases going forward have heightened the need for measuring the impacts of research investments. Without a credible analysis of their outcomes, the recent and proposed increases in S&T funding may not be sustained, especially given competing claims for federal funding and pressures to reduce projected federal budget deficits. Motivated by these needs and requirements, Measuring the Economic Impacts of Federal Investments in Research reviews and discusses the use of quantitative and qualitative data to evaluate the returns on federal research and development (R&D) investments. Despite the job-focused mandate of the current ARRA reporting requirements, the impact of S&T funding extend well beyond employment. For instance, federal funding in energy research may lead to innovations that would reduce energy costs at the household level, energy imports at the national level, and greenhouse gas emissions at the global level. In principle, these benefits can be measured as a return on research investments, with appropriate consideration of time lags to research outcomes and attribution to private as well as public expenditure. With appropriate metrics, the same could be true for benefits to public health, environmental quality, and food productivity and security. Federal funding of research leads to the development of human capital that is deployed in a variety of occupations with economic and social impacts. Research also produces information that is used in formal (e.g., regulatory and judicial) and informal (e.g., firm and consumer) decision making processes. In addition to reviewing the range of work (by academics, consultants, and research agencies themselves) that has been done in measuring research outcomes and providing a forum to discuss their methods, this report also considers the different methodologies used across fields of research (e.g., agriculture and energy research) to identifies which are applicable to a range of federal S&T funding.

99 GENERAL AND MISCELLANEOUS↗

Optical spectroscopy of holmium doped K 2 LaCl 5

Spectroscopic results on the infrared emission properties of trivalent holmium (Ho 3+ ) doped potassium lanthanum chloride (K 2 LaCl 5 ) are presented. Using ~900 nm excitation, Ho 3+ doped K 2 LaCl 5 , which has a maximum phonon energy of 235 cm –1 , exhibited the infrared emissions at ~1660, ~1995, and ~3900 nm at room temperature. The mid-infrared emission at 3900 nm originated from the 5 I 5 → 5 I 6 transition of Ho 3+ ions with an exponential decay time of ~7.8 ms at room temperature. The fluorescence lifetimes were almost independent of temperature, indicating a negligibly small non-radiative decay rate for the 5 I 5 excited state, as predicted by the energy gap law for low phonon energy hosts. The Stark level energies of the lower 5 I J manifolds in Ho:K 2 LaCl 5 were resolved from spectroscopic results performed at cryogenic temperatures. The transition line-strengths, radiative lifetimes, and fluorescence branching ratios were investigated by using the Judd-Ofelt method. In addition, the peak emission cross-section of the 5 I 5 → 5 I 6 transition was calculated to be 1.8 × 10 –20 cm 2 at ~3890 nm.

36 MATERIALS SCIENCE↗

Nuclear Data Sheets for A = 42

The experimental data are evaluated for known nuclides of mass number A = 42 (Al, Si, P, S, Cl, Ar, K, Ca, Sc, Ti, V, Cr). Detailed evaluated level properties and related information are presented, including adopted values of level and γ–ray energies, decay data (energies, intensities and placement of radiations), and other spectroscopic data. This work supersedes earlier full evaluations of A = 42 published by B. Singh, J.A. Cameron – Nucl.Data Sheets 92, 1 (2001) and P.M. Endt – Nucl. Phys. A521, 1 (1990); Errata and Addenda Nucl. Phys. A529, 763 (1991); Errata Nucl. Phys. A564, 609 (1993) (also P.M. Endt – Nucl. Phys. A633, 1 (1998) update). No excited states are known in {sup 42}Al, {sup 42}P, {sup 42}V and {sup 42}Cr, and structure information for {sup 42}Si and {sup 42}S is quite limited. There are no decay schemes available for the decay of {sup 42}Al, {sup 42}Si, {sup 42}P, {sup 42}V and {sup 42}Cr, while the decay schemes of {sup 42}Cl and {sup 42}Ti are incomplete in view of scarcity of data, and large gap between their Q–values and the highest energy levels populated in corresponding daughter nuclei. Structures of {sup 42}Ca, {sup 42}K, {sup 42}Sc and {sup 42}Ar nuclides remain the most extensively studied via many different nuclear reactions and decays.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Characterization of cellulosic wastes and gasification products from chicken farms

Highlights: Black-Right-Pointing-Pointer The gas chromatography indicated the variable quality of the producer gas. Black-Right-Pointing-Pointer The char had appreciable NPK values, and can be used as a fertiliser. Black-Right-Pointing-Pointer The bio-oil produced was of poor quality, having high moisture content and low pH. Black-Right-Pointing-Pointer Mass and energy balances showed inadequate level energy recovery from the process. Black-Right-Pointing-Pointer Future work includes changing the operating parameters of the gasification unit. - Abstract: The current article focuses on gasification as a primary disposal solution for cellulosic wastes derived from chicken farms, and the possibility to recover energy from this process. Wood shavings and chicken litter were characterized with a view to establishing their thermal parameters, compositional natures and calorific values. The main products obtained from the gasification of chicken litter, namely, producer gas, bio-oil and char, were also analysed in order to establish their potential as energy sources. The experimental protocol included bomb calorimetry, pyrolysis combustion flow calorimetry (PCFC), thermo-gravimetric analyses (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, elemental analyses, X-ray diffraction (XRD), mineral content analyses and gas chromatography. The mass and energy balances of the gasification unit were also estimated. The results obtained confirmed that gasification is a viable method of chicken litter disposal. In addition to this, it is also possible to recover some energy from the process. However, energy content in the gas-phase was relatively low. This might be due to the low energy efficiency (19.6%) of the gasification unit, which could be improved by changing the operation parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗