Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy Recovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Scenarios of a Sustainable Energy Transition: Perspectives from the U.S.

The energy sector has been undergoing a significant transition over the past decade, which was accelerated in 2020 during the COVD-19 pandemic. This presentation provides an overview of energy trends in the U.S., including electricity, oil and gas, coal, and renewables, the impact of the pandemic in 2020, and forecasts for recovery. Scenarios of energy use and future integrated technologies are outlined as near and mid-term approaches. The presentation concludes with potential U.S. policy priorities focused on energy and economic recovery, as well as perspectives on energy planning from the disruptions of 2020. The presentation is part of day-long series of presentations covering post-COVID-19 energy responses in Asia, Australia, Europe, and the United States.

COVID-19↗

Tailoring Chemical Absorption-Precipitation to Lower the Regeneration Energy of a CO 2 Capture Solvent

Solvent-based CO 2 capture consumes significant amounts of energy for solvent regeneration. To improve energy efficiency, this study investigates CO 2 fixation in a solid form through solvation, followed by ionic self-assembly-aided precipitation. Based on the hypothesis that CO 3 2- ions may bind with monovalent metal ions, we introduced Na + into an aqueous hexane-1,6-diamine solution where CO 2 forms carbamate and bicarbonate. Then, Na + ions in the solvent act as a seed for ionic self-assembly with diamine carbamate to form an intermediate ionic complex. The recurring chemical reactions lead to the formation of an ionic solid from a mixture of organic carbamate/carbonate and inorganic sodium bicarbonate (NaHCO 3 ), which can be easily removed from the aqueous solvent through sedimentation or centrifugation and heated to release the captured CO 2 . Mild-temperature heating of the solids at 80–150 °C causes decomposition of the solid CO 2 -diamine-Na molecular aggregates and discharge of CO 2 . This sorbent regeneration process requires 6.5–8.6 GJ/t CO 2 . It was also found that the organic carbamate/carbonate solid, without NaHCO 3 , contains a significant amount of CO 2 , up to 6.2 mmol CO 2 /g-sorbent, requiring as low as 2.9–5.8 GJ/t CO 2 . In conclusion, molecular dynamic simulations support the hypothesis of using Na + to form relatively less stable, yet sufficiently solid, complexes for the least energy-intensive recovery of diamine solvents compared to bivalent carbonate–forming ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization Behavior of Liquid CaO-SiO{sub 2}-FeO-MnO Slag in Relation to Its Reaction with Moisture

To help maintain the sustainability of the steel industry, we are developing a novel process to recover thermal energy (in the form of hydrogen) and valuable metal elements contained in steelmaking slags by reacting molten slags with moisture. The process is dependent on the structure and properties of the slag, of which the crystallization tendency is key, since surface phases affect the slag reactivity with the gas and enable selective formation of solid phases containing transition metals. In this paper, the precipitated phases of the molten synthetic CaO-SiO{sub 2}-FeO-MnO slags after reacting with moisture were calculated by using thermodynamic package FactSage 7.0. Laboratory experiments were conducted to reveal the crystallization behavior of the targeted metal oxides in the slags with the aim of crystallization control. A hot stage-equipped confocal laser scanning microscope (CLSM) was used to in-situ observe the crystal precipitation on the surface of the liquid slag after reacting with moisture. Time temperature transformation (TTT) and continuous cooling transformation (CCT) diagrams were created from the precipitation behavior of crystals during cooling in the temperature range of 1873 K to 1173 K (1600 °C to 900 °C). The microstructures of the reacted slags were analyzed with a scanning electron microscope (SEM) equipped with an energy-dispersive spectrometer (EDS) and the phases present in the slag were characterized by X-ray diffraction (XRD). TTT curves of the reacted slags (with moisture) indicated that the nose temperature and critical time for nucleation located at 1473 K (1200 °C) and 89 seconds for the slag with basicity of 1.00. Further increasing the slag basicity to 1.25 and 1.50 increased the nose temperature to 1523 K and 1698 K (1250 °C and 1425 °C), respectively. CCT curves of the reacted slags (with moisture) indicated that the crystallization temperatures of precipitated phases increased with decreasing the cooling rate from 800 to 10 K/min, and the crystallization temperatures of primary phases increased with increasing slag basicity. Both magnetite (Fe{sub 3}O{sub 4}) and monoxide ((FeO){sub x}(MnO){sub 1−x}) phases were detected by SEM-EDS and XRD in the reacted slags (with moisture). The amount of magnetite in the reacted slags increased from 25 to 32 pct to 36 pct and that of monoxide decreased from 5 to 2 pct to 1 pct with the slag basicity increasing from 1.00 to 1.25 to 1.50.

36 MATERIALS SCIENCE↗

Thermoeconomic analysis of a multigeneration system using waste heat from a triple power cycle

Multigeneration systems represent an appealing concept, due to their multiple benefits compared to standalone systems, which has motivated researchers to develop different types of multigeneration systems for several applications. Considering their significance, in this study, a novel multigeneration is proposed that uses the waste heat of a thermodynamically efficient triple power cycle with a 100 MWe capacity. The proposed system, which can generate power, freshwater, cooling, and domestic hot water concurrently, is evaluated using detailed thermodynamic and economic analyses. The triple cycle includes a simple Brayton cycle coupled with a supercritical carbon dioxide recompression cycle and a high-temperature organic Rankine cycle. The waste energy of the recompression and organic Rankine cycles is recovered by a half effect absorption chiller, a multi-effect distillation unit, and two heat exchangers. The results show that for an optimized triple cycle, up to 1,804 kW cooling and 8,472 m 3 /day of hot water can be generated from the hot supercritical carbon dioxide stream with a levelized cost of cooling and hot water of 0.0362/ton-hr and $0.6823/MWth, respectively. The integration of a multi-effect distillation unit with 7 effects can generate 4,167 m 3 /day freshwater with a levelized cost of water of $1.142/m 3 . Finally, the proposed multigeneration system offers a very promising application and a number of benefits such as a generating multiple useful products with no adverse effect on the thermodynamic efficiency of the triple power cycle.

Thermoeconomic analysis↗

The energy budget and figure of Earth during recovery from the Moon-forming giant impact

Quantifying the energy budget of Earth in the first few million years following the Moon-forming giant impact is vital to understanding Earth's initial thermal state and the dynamics of lunar tidal evolution. After the impact, the body was substantially vaporized and rotating rapidly, very different from the planet we know today. The subsequent evolution of Earth's energy budget, as the body cooled and angular momentum was transferred during lunar tidal recession, has not been accurately calculated with all relevant energy components included. In this work, we use giant impact simulations and planetary structure models to calculate the energy budget at stages in Earth's evolution. We show that the figure and internal structure of Earth changed substantially during its post-impact evolution and that changes in kinetic, potential, and internal energy were all significant. These changes have important implications for the dynamics of tidal recession and the thermal structure of early Earth.

58 GEOSCIENCES↗

Performance characteristics of a turbo expander substituted for expansion valve on air-conditioner

An experimental study is conducted on a small turbo expander which could be applied to the expansion process in place of expansion valves in refrigerator or air-conditioner to improve the cycle efficiency by recovering energy from the throttling process. The operating gas is HFC134a and the maximum cooling capacity of experiment apparatus is 32.7 kW. Four different turbo expanders are tested to find the performance characteristics of the turbo expander when they operate at a low partial admission rate. The partial admission rate is 1.70% or 2.37, and expanders are operated in the supersonic flow. In the experiment, pressure and temperature are measured at 10 different locations in the experimental apparatus. In addition to these measurements, output power at the turbo expander is measured through a generator installed on a rotor shaft with the rotational speed. Performance data of the turbo expander are obtained at many part load operations by adjusting the output power of the generator. A maximum of 15.8% total-to-static efficiency is obtained when the pressure ratio and the partial admission ratio are 2.37 and 1.70%, respectively. Experimental results show that the optimal velocity ratio decreases when the pressure ratio is decreased, and peak efficiencies, which are obtained at locally maximized efficiency depending on the operating condition, vary linearly against the subcooling temperature or the pressure ratio. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Bearing the risk of abandonment

In Order Nos. 679 and 679-A, FERC adopted a policy of authorizing rate incentives for new transmission early in the development process to encourage transmission investment. The abandoned-plant cost recovery incentive creates a tension between ratepayer and investor interests, which is increasingly reflected in FERC's orders. (author)

24 POWER TRANSMISSION AND DISTRIBUTION↗

Improvement actions in waste management systems at the provincial scale based on a life cycle assessment evaluation

Highlights: • LCA was used for evaluating the performance of four provincial waste management systems. • Milano, Bergamo, Pavia and Mantova (Italy) are the provinces selected for the analysis. • Most of the data used to model the systems are primary. • Significant differences were found among the provinces located in the same Region. • LCA was used as a decision-supporting tool by Regione Lombardia. - Abstract: This paper reports some of the findings of the ‘GERLA’ project: GEstione Rifiuti in Lombardia – Analisi del ciclo di vita (Waste management in Lombardia – Life cycle assessment). The project was devoted to support Lombardia Region in the drafting of the new waste management plan by applying a life cycle thinking perspective. The present paper mainly focuses on four Provinces in the Region, which were selected based on their peculiarities. Life cycle assessment (LCA) was adopted as the methodology to assess the current performance of the integrated waste management systems, to discuss strengths and weaknesses of each of them and to design their perspective evolution as of year 2020. Results show that despite a usual business approach that is beneficial to all the provinces, the introduction of technological and management improvements to the system provides in general additional energy and environmental benefits for all four provinces. The same improvements can be easily extended to the whole Region, leading to increased environmental benefits from the waste management sector, in line with the targets set by the European Union for 2020.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adsorptive Separation of 1-Butanol from Aqueous Solutions Using MFI- and FER-Type Zeolite Frameworks: A Monte Carlo Study

We report that anaerobic fermentation can transform carbohydrates to yield a multicomponent mixture comprising mainly of acetone, 1-butanol, and ethanol (ABE) in a typical weight ratio of 3:6:1. Compared to ethanol, 1-butanol, the main product of ABE fermentation, offers significant advantages as a biofuel or a fuel additive. However, the toxicity of 1-butanol for cell cultures requires broth concentrations to be low in 1-butanol (≈1–2 wt %). An energy-efficient recovery method that performs well even at low 1-butanol concentrations is therefore necessary to ensure economic feasibility of the ABE fermentation process. In this work, configurational-bias Monte Carlo simulations in the Gibbs ensemble are performed to probe the adsorption of 1-butanol/water solutions onto all-siliceous zeolites with the framework types MFI and FER. At low solution concentration, the selectivity and capacity for 1-butanol in MFI are larger than those in FER, while the opposite is true for concentrations at or above those of ABE broths. Finally, structural analysis at various loadings sheds light on the different sorbate–sorbate and sorbate–sorbent interactions that govern trends in adsorption in each zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Injector linac for the MESA facility

In this paper we present several possible configurations of an injector linac for the upcoming Mainz Energy-recovering Superconducting Accelerator (MESA) [1] and discuss their suitability for the project.

43 PARTICLE ACCELERATORS↗

A multi-perspective review of microbial fuel-cells for wastewater treatment: Bio-electro-chemical, microbiologic and modeling aspects

Microbial Fuel Cells (MFCs) represent a still novel technology for the recovery of energy and resources through wastewater treatment. Although the technology is quite appealing, due its potential benefits, its practical application is still hampered by several drawbacks, such as systems instability (especially when attempting to scale-up reactors from laboratory prototype), internally competing microbial reactions, and limited power generation. This paper is an attempt to address several of the operational issues related to MFCs application to wastewater treatment, in particular when dealing with simultaneous organic matter and nitrogen pollution control. Reactor configuration, operational schemes, electrochemical and microbiological characterization, optimization methods and modelling strategies are reviewed and discussed with a multidisciplinary, multi-perspective approach. The conclusions drawn herein can be of practical interest for all MFC researchers dealing with domestic or industrial wastewater treatment..

09 BIOMASS FUELS↗

Selective permeation up a chemical potential gradient to enable an unusual solvent purification modality

The need for energy-efficient recovery of organic solutes from aqueous streams is becoming more urgent as chemical manufacturing transitions toward nonconventional and bio-based feedstocks and processes. In addition to this, many aqueous waste streams contain recalcitrant organic contaminants, such as pharmaceuticals, industrial solvents, and personal care products, that must be removed prior to reuse. We observe that rigid carbon membrane materials can remove and concentrate organic contaminants via an unusual liquid-phase membrane permeation modality. Surprisingly, detailed thermodynamic calculations on the chemical potential of the organic contaminant reveal that the organic species has a higher chemical potential on the permeate side of the membrane than on the feed side of the membrane. This unusual observation challenges conventional membrane transport theory that posits that all permeating species move from high chemical potential states to lower chemical potential states. Based on experimental measurements, we hypothesize that the organic is concentrated in the membrane relative to water via favorable binding interactions between the organic and the carbon membrane. The concentrated organic is then swept through the membrane via the bulk flow of water in a modality known as “sorp-vection.” We highlight via simplified nonequilibrium thermodynamic models that this “uphill” chemical potential permeation of the organic does not result in second-law violations and can be deduced via measurements of the organic and water sorption and diffusion rates into the carbon membrane. Moreover, this work identifies the need to consider such nonidealities when incorporating unique, rigid materials for the separations of aqueous waste streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platform for Accurate Efficiency Quantification of > 35% Efficient Thermophotovoltaic Cells

Thermophotovoltaic (TPV) devices convert thermal radiation directly into electricity using semiconductor diodes and have a variety of uses from waste heat recovery to energy storage to primary power conversion. Recent results have demonstrated promising cells nearing and surpassing 30% conversion efficiency. As TPV cells continue to increase in efficiency, they become attractive for a wider range of applications. Their efficiencies must be quantified in a standardized fashion to compare results accurately across research groups. Here, we outline and quantify the most important characteristics of an accurate and precise TPV efficiency measurement. Using a custom-built measurement apparatus that takes these characteristics into account, we report 19 cells with greater than 30% conversion efficiency and 2 cells with greater than 35% conversion efficiency. This confirms that our reported cell efficiencies are not simply those of hero cells but rather of a distribution of cells that can be produced in a consistent, high-quality process.

III-V↗

The ERL-based Design of Electron-Hadron Collider eRHIC

Recent developments of the ERL-based design of future high-luminosity electron-hadron collider eRHIC focused on balancing technological risks present in the design versus the design cost. As a result a lower risk design has been adopted at moderate cost increase. The modifications include a change of the main linac RF frequency, reduced number of SRF cavity types and modified electron spin transport using a spin rotator. A luminosity-staged approach is being explored with a Nominal design ($L \sim 10^{33} {\rm cm}^2 {\rm s}^{-1}$) that employs reduced electron current and could possibly be based on classical electron cooling, and then with the Ultimate design ($L \gt 10^{34} {\rm cm}^{-2} {\rm s}^{-1}$) that uses higher electron current and an innovative cooling technique (CeC). The paper describes the recent design modifications, and presents the full status of the eRHIC ERL-based design.

43 PARTICLE ACCELERATORS↗