Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electronic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Efficient preconditioning of the electronic structure problem in large scale ab initio molecular dynamics simulations

We present an improved preconditioning scheme for electronic structure calculations based on the orbital transformation method. First, a preconditioner is developed which includes information from the full Kohn-Sham matrix but avoids computationally demanding diagonalisation steps in its construction. This reduces the computational cost of its construction, eliminating a bottleneck in large scale simulations, while maintaining rapid convergence. In addition, a modified form of Hotelling’s iterative inversion is introduced to replace the exact inversion of the preconditioner matrix. This method is highly effective during molecular dynamics (MD), as the solution obtained in earlier MD steps is a suitable initial guess. Filtering small elements during sparse matrix multiplication leads to linear scaling inversion, while retaining robustness, already for relatively small systems. For system sizes ranging from a few hundred to a few thousand atoms, which are typical for many practical applications, the improvements to the algorithm lead to a 2-5 fold speedup per MD step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure investigation of atomic layer deposition ruthenium(oxide) thin films using photoemission spectroscopy

Analyzing and manipulating the electronic band line-up of interfaces in novel micro- and nanoelectronic devices is important to achieve further advancement in this field. Such band alignment modifications can be achieved by introducing thin conformal interfacial dipole layers. Atomic layer deposition (ALD), enabling angstrom-precise control over thin film thickness, is an ideal technique for this challenge. Ruthenium (Ru{sup 0}) and its oxide (RuO{sub 2}) have gained interest in the past decade as interfacial dipole layers because of their favorable properties like metal-equivalent work functions, conductivity, etc. In this study, initial results of the electronic structure investigation of ALD Ru{sup 0} and RuO{sub 2} films via photoemission spectroscopy are presented. These experiments give insight into the band alignment, growth behavior, surface structure termination, and dipole formation. The experiments were performed in an integrated vacuum system attached to a home-built, stop-flow type ALD reactor without exposing the samples to the ambient in between deposition and analysis. Bis(ethylcyclopentadienyl)ruthenium(II) was used as precursor and oxygen as reactant. The analysis chamber was outfitted with X-ray photoemission spectroscopy (LIXPS, XPS). The determined growth modes are consistent with a strong growth inhibition situation with a maximum average growth rate of 0.21 Å/cycle for RuO{sub 2} and 0.04 Å/cycle for Ru.{sup 0} An interface dipole of up to −0.93 eV was observed, supporting the assumption of a strongly physisorbed interface. A separate experiment where the surface of a RuO film was sputtered suggests that the surface is terminated by an intermediate, stable, non-stoichiometric RuO{sub 2}/OH compound whose surface is saturated with hydroxyl groups.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure at transition metal phthalocyanine-transition metal oxide interfaces: Cobalt phthalocyanine on epitaxial MnO films

The electronic structure of the interface between cobalt phthalocyanine (CoPc) and epitaxially grown manganese oxide (MnO) thin films is studied by means of photoemission (PES) and X-ray absorption spectroscopy (XAS). Our results reveal a flat-lying adsorption geometry of the molecules on the oxide surface which allows a maximal interaction between the π-system and the substrate. A charge transfer from MnO, in particular, to the central metal atom of CoPc is observed by both PES and XAS. The change of the shape of N-K XAS spectra at the interface points, however, to the involvement of the Pc macrocycle in the charge transfer process. As a consequence of the charge transfer, energetic shifts of MnO related core levels were observed, which are discussed in terms of a Fermi level shift in the semiconducting MnO films due to interface charge redistribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the electronic structure of LiC 6 by soft X-ray spectroscopy

The electronic structure of LiC 6 has been investigated in this paper by soft X-ray absorption and emission spectroscopies. The results reveal that upon full lithiation of graphite, the Li 2s electrons are transferred into the carbon π* states in a near rigid-band behavior, resulting in the increased density of states near E F and the shift of σ* states to lower energies. Finally, in addition, the resonant inelastic X-ray scattering spectra of LiC 6 do not show strong dispersive features as that of graphite, indicating that the crystal momentum is not conserved during the scattering process due to the delocalization of electrons in the intermediate state.

36 MATERIALS SCIENCE↗

Lattice and electronic structure of ScN observed by angle-resolved photoemission spectroscopy measurements

Scandium nitride (ScN) has recently attracted much attention for its potential applications in thermoelectric energy conversion, as a semiconductor in epitaxial metal/semiconductor superlattices, as a substrate for GaN growth, and alloying it with AlN for 5G technology. This study was undertaken to better understand its stoichiometry and electronic structure. ScN (100) single crystals 2 mm thick were grown on a single crystal tungsten (100) substrate by a physical vapor transport method over a temperature range of 1900–2000 °C and a pressure of 20 Torr. The core level spectra of Sc 2p 3/2,1/2 and N 1s were obtained by x-ray photoelectron spectroscopy (XPS). The XPS core levels were shifted by 1.1 eV toward higher values as the [Sc]:[N] ratio varied from 1.4 at 1900 °C to ~1.0 at 2000 °C due to the higher binding energies in stoichiometric ScN. Angle-resolved photoemission spectroscopy measurements confirmed that ScN has an indirect bandgap of ~1.2 eV.

42 ENGINEERING↗

Electronic structure and magnetism of the diluted magnetic semiconductor Fe-doped ZnO nanoparticles

We have studied the electronic structure of Fe-doped ZnO nanoparticles, which have been reported to show ferromagnetism at room temperature, by x-ray photoemission spectroscopy, resonant photoemission spectroscopy, x-ray absorption spectroscopy, and x-ray magnetic circular dichroism (XMCD). From the experimental and cluster-model calculation results, we find that Fe atoms are predominantly in the Fe{sup 3+} ionic state with mixture of a small amount of Fe{sup 2+} and that Fe{sup 3+} ions are dominant in the surface region of the nanoparticles. It is shown that the room temperature ferromagnetism in the Fe-doped ZnO nanoparticles primarily originated from the antiferromagnetic coupling between unequal amounts of Fe{sup 3+} ions occupying two sets of nonequivalent positions in the region of the XMCD probing depth of {approx}2-3 nm.

36 MATERIALS SCIENCE↗

Solid state {sup 1}H spin-lattice relaxation and isolated-molecule and cluster electronic structure calculations in organic molecular solids: The relationship between structure and methyl group and t-butyl group rotation

We report ab initio density functional theory electronic structure calculations of rotational barriers for t-butyl groups and their constituent methyl groups both in the isolated molecules and in central molecules in clusters built from the X-ray structure in four t-butyl aromatic compounds. The X-ray structures have been reported previously. We also report and interpret the temperature dependence of the solid state {sup 1}H nuclear magnetic resonance spin-lattice relaxation rate at 8.50, 22.5, and 53.0 MHz in one of the four compounds. Such experiments for the other three have been reported previously. We compare the computed barriers for methyl group and t-butyl group rotation in a central target molecule in the cluster with the activation energies determined from fitting the {sup 1}H NMR spin-lattice relaxation data. We formulate a dynamical model for the superposition of t-butyl group rotation and the rotation of the t-butyl group's constituent methyl groups. The four compounds are 2,7-di-t-butylpyrene, 1,4-di-t-butylbenzene, 2,6-di-t-butylnaphthalene, and 3-t-butylchrysene. We comment on the unusual ground state orientation of the t-butyl groups in the crystal of the pyrene and we comment on the unusually high rotational barrier of these t-butyl groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure and photoluminescence properties of Eu{sup 2+}-activated Ca{sub 2}BN{sub 2}F

The electronic structure of undoped and luminescence properties of Eu{sup 2+}-doped Ca{sub 2}BN{sub 2}F have been investigated. First-principles calculations for Ca{sub 2}BN{sub 2}F show that the valence band is mainly composed of F and N 2p, B 2s and 2p orbitals, while the Ca 4s and 3d are almost empty, indicating that Ca{sub 2}BN{sub 2}F is a very ionic compound. The valence band close to the Fermi level is dominated by the N 2p states, and the bottom of the conduction band is determined by the Ca 3d and N/B 3s orbitals. The direct energy gap is calculated to be about 3.1 eV, in fair agreement with the experimental data of {approx}3.6 eV derived from the diffuse reflection spectrum. Due to the high degree of ionic bonding of the coordinations of Eu with (N, F) on the Ca sites, Ca{sub 2}BN{sub 2}F:Eu{sup 2+} shows strong blue emission with a maximum at about 420 nm upon UV excitation in the absorption range of 330-400 nm. - Graphical abstract: Diffuse reflection spectrum, excitation and emission spectra of Ca{sub 2}BN{sub 2}F:Eu{sup 2+}, showing that only the ionic Eu{sup 2+} center offers deep blue emission at about 422 nm under excitation at 339 nm.

36 MATERIALS SCIENCE↗

Electronic structure and small-hole polarons in YTiO 3

As a prototypical Mott insulator with ferromagnetic ordering, YTiO 3 (YTO) is of great interest in the study of strong electron correlation effects and orbital ordering. Here we report the first molecular beam epitaxy (MBE) growth of YTO films, combined with theoretical and experimental characterizations of the electronic structure and charge transport properties. The obstacles of YTO MBE growth are discussed and potential routes to overcome them are proposed. DC transport and Seebeck measurements on thin films and bulk single crystals identify p-type Arrhenius transport behavior with an activation energy of ~0.17 eV in thin films, consistent with the energy barrier for small hole polaron migration from hybrid density functional theory calculations. Hard x-ray photoelectron spectroscopy measurements show the lower Hubbard band at 1.1 eV below the Fermi level, whereas a Mott-Hubbard band gap of ~1.5 eV is determined from photoluminescence measurements. These findings provide critical insight into the electronic band structure of YTO and related materials.

36 MATERIALS SCIENCE↗

Electronic structure of the quadrupolar ordered heavy-fermion compound YbRu 2 Ge 2 measured by angle-resolved photoemission

We studied the electronic structure of the heavy-fermion compound Yb(Ru 1–x Rh x ) 2 Ge 2 with x = 0 and nominally x = 0.125 using ARPES and LDA calculations. We find a valence band structure of Yb corresponding to a noninteger valence close to 3+. The three observed crystal electric field levels with a splitting of 32 and 75 meV confirm the suggested configuration with a quasiquartet ground state. The experimentally determined band structure of the conduction electrons with predominantly Ru 4d character is well reproduced by our calculations. YbRu 2 Ge 2 undergoes a nonmagnetic phase transition into a ferroquadrupolar ordered state below 10.2 K and then to an antiferromagnetically ordered state below 6.5 K. A small hole Fermi surface shows nesting features in our calculated band structure and its size determined by ARPES is close to the magnetic ordering wave vector found in neutron scattering. The transitions are suppressed when YbRu 2 Ge 2 is doped with 12.5% Rh. In conclusion, the electron doping leads to a shift of the band structure and successive Lifshitz transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal and Electronic Structure of FeSe at High Pressure and Low Temperature

We have investigated the high-pressure crystal and electronic structures of superconducting FeSe by high-resolution synchrotron powder X-ray diffraction and density functional theory (DFT) calculations at ambient and at low temperatures down to 8 K. Ambient nuclear resonant inelastic X-ray scattering (NRIXS) experiments were performed on FeSe to understand the partial phonon density of states (PDOS) of the high-pressure phases. On the basis of our experimental results and DFT calculations, we demonstrate a pressure-induced distortion of the low-temperature Cmma phase at around 1.6 GPa and the appearance of a high-pressure Pbnm phase. Upon increasing the pressure above 9 GPa, the orthorhombic phase becomes the major phase, and a mixed-phase region exists up to 26 GPa. The pressure-induced structural changes in this system and its connection to T{sub c} enhancement are discussed.

43 PARTICLE ACCELERATORS↗

Electronic Structure and Epitaxy of CdTe Shells on InSb Nanowires

Abstract Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, that is, strong spin‐orbit interaction and large Landé g‐factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, the combination of the II–VI cadmium telluride (CdTe) with the III–V InSb in the form of core–shell (InSb–CdTe) nanowires is investigated and potential applications based on the electronic structure of the InSb–CdTe interface and the epitaxy of CdTe on the InSb nanowires are explored. The electronic structure of the InSb–CdTe interface using density functional theory is determined and a type‐I band alignment is extracted with a small conduction band offset ( ⩽0.3 eV). These results indicate the potential application of these shells for surface passivation or as tunnel barriers in combination with superconductors. In terms of structural quality, it is demonstrated that the lattice‐matched CdTe can be grown epitaxially on the InSb nanowires without interfacial strain or defects. These shells do not introduce disorder to the InSb nanowires as indicated by the comparable field‐effect mobility measured for both uncapped and CdTe‐capped nanowires.

36 MATERIALS SCIENCE↗

Electronic structure changes during the surface-assisted formation of a graphene nanoribbon

High conductivity and a tunability of the band gap make quasi-one-dimensional graphene nanoribbons (GNRs) highly interesting materials for the use in field effect transistors. Especially bottom-up fabricated GNRs possess well-defined edges which is important for the electronic structure and accordingly the band gap. In this study we investigate the formation of a sub-nanometer wide armchair GNR generated on a Au(111) surface. The on-surface synthesis is thermally activated and involves an intermediate non-aromatic polymer in which the molecular precursor forms polyanthrylene chains. Employing angle-resolved two-photon photoemission in combination with density functional theory calculations we find that the polymer exhibits two dispersing states which we attribute to the valence and the conduction band, respectively. While the band gap of the non-aromatic polymer obtained in this way is relatively large, namely 5.25 ± 0.06 eV, the gap of the corresponding aromatic GNR is strongly reduced which we attribute to the different degree of electron delocalization in the two systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Structure of Optimally Doped Pnictide Ba0.6K0.4Fe2As2: A Comprehensive Angle-resolved Photoemission Spectroscopy Investigation

The electronic structure of the Fe-based superconductor Ba{sub 0.6}K{sub 0.4}Fe{sub 2}As{sub 2} is studied by means of angle-resolved photoemission. We identify dispersive bands crossing the Fermi level forming hole-like (electron-like) Fermi surfaces (FSs) around {Lambda} (M) with nearly nested FS pockets connected by the antiferromagnetic wavevector. Compared to band structure calculation findings, the overall bandwidth is reduced by a factor of 2 and the low energy dispersions display even stronger mass renormalization. Using an effective tight banding model, we fitted the band structure and the FSs to obtain band parameters reliable for theoretical modeling and calculation of physical quantities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular dopants: Tools to control the electronic structure of metal halide perovskite interfaces

In the standard configurations of metal halide perovskite solar cell, the active layer, or absorber, follows a p-i-n or n-i-p electronic structure that is designed to enhance the separation and extraction of photo-induced charge carriers. The control of the Fermi level position across the film, between electron and hole transport layers, is therefore of paramount importance. Direct localized doping in metal halide perovskites being still elusive, the design of n-i-p and p-i-n structures has so far relied predominantly on surface and interface doping of the perovskite as well as on the control of the work function of the substrate and transport layers on which, or between which, the absorber is being placed. We provide here a short review of that work, emphasizing the fundamental studies of electronic structure performed on systems modified with organic molecular dopants. The review starts with a justification for the effectiveness of interface doping, based on the ability to move the Fermi level across the gap of the perovskite. We then review work done on the deposition of molecular oxidants and reductants on perovskite surfaces, including the mitigation of the surface states, and the impact of these dopants on energy level alignment with substrate and charge transport layers. The second part of the review focuses on the use of molecular dopants to either modify the work function of electron or hole transport layers to establish the boundary conditions for a p-i-n or n-i-p structure, or to enhance the conductivity of these layers in order to facilitate charge carrier extraction. Final considerations are also given on recent work on bulk doping of the perovskite layer with molecular dopants.

14 SOLAR ENERGY↗

Structure electronic and ionic conductivity study versus Ca content in Ca{sub 10-x}Sr{sub x}(PO{sub 4}){sub 6}F{sub 2} apatites

Substitution effect on the crystallographic structure in Ca{sub 10-x}Sr{sub x}(PO{sub 4}){sub 6}F{sub 2} solid solution are studied by X-ray diffraction patterns and Rietveld refinements. Full potential electronic structure calculations based on LCAO (linear combination atomic orbital) are also performed using the obtained crystallographic parameters. DOS modification and the charge transfer are estimated versus the calcium content. According to the complex impedance method, ionic conductivity changes are explained.

36 MATERIALS SCIENCE↗

Elucidating the electronic structure of supported gold nanoparticles and its relevance to catalysis by means of hard X-ray photoelectron spectroscopy

We report on the electronic structure of Au (gold) nanoparticles supported onto TiO 2 with a goal of elucidating the most important effects that contribute to their high catalytic activity. We synthesize and characterize with high resolution transmission electron microscopy (HRTEM) 3.4, 5.3, and 9.5 nm diameter TiO 2 -supported Au nanoparticles with nearly spherical shape and measure their valence band using Au 5d subshell sensitive hard X-ray photoelectron spectroscopy (HAXPES) conducted at Spring-8. Based on density functional theory (DFT) calculations of various Au surface structures, we interpret the observed changes in the Au 5d valence band structure as a function of size in terms of an increasing percentage of Au atoms at corners/edges for decreasing particle size. Finally, this work elucidates how Au coordination number impacts the electronic structure of Au nanoparticles, ultimately giving rise to their well-known catalytic activity.

36 MATERIALS SCIENCE↗

Crystallographic, magnetic, and electronic structures of ferromagnetic shape memory alloys Ni{sub 2}XGa (X=Mn,Fe,Co) from first-principles calculations

The crystallographic, magnetic and electronic structures of the ferromagnetic shape memory alloys Ni{sub 2}XGa (X=Mn, Fe, and Co), are systematically investigated by means of the first-principles calculations within the framework of density functional theory using the VIENNA AB INITIO SOFTWARE PACKAGE. The lattice parameters of both austenitic and martensitic phases in Ni{sub 2}MnGa have been calculated. The formation energies of the cubic phase of Ni{sub 2}XGa are estimated, and show a destabilization tendency if Mn atom is substituted by Fe or Co. From Ni{sub 2}MnGa to Ni{sub 2}CoGa, the down spin total density of states (DOS) at Fermi level is gradually increasing, whereas that of the up spin part remains almost unchanged. This is the main origin of the difference of the magnetic moment in these alloys. The partial DOS is dominated by the Ni and Mn 3d states in the bonding region below E{sub F}. There are two bond types existing in Ni{sub 2}XGa: one is between neighboring Ni atoms in Ni{sub 2}MnGa; the other is between Ni and X atoms in Ni{sub 2}FeGa and Ni{sub 2}CoGa alloys.

36 MATERIALS SCIENCE↗