Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Comparison of complementary reactions for the production of {sup 261,262}Bh

Two heavy-ion induced fusion reactions producing {sup 261,262}Bh were studied using the Berkeley Gas-filled Separator at the Lawrence Berkeley National Laboratory 88-Inch Cyclotron. An excitation function for the production of {sup 262}Bh via the reaction {sup 209}Bi({sup 54}Cr,n){sup 262}Bh was measured with a maximum cross section from a fit to the data of 430 {+-} 110 pb observed at a compound nucleus excitation energy of 15.7 MeV. New data have been measured for the 1n exit channel of the {sup 208}Pb({sup 55}Mn, n){sup 262}Bh reaction. We present an updated excitation function with an observed maximum cross section of 530{+-}100 pb at a compound nucleus excitation energy of 14.1 MeV. Events corresponding to the 2n exit channel for the {sup 209}Bi({sup 54}Cr,2n){sup 261}Bh and {sup 208}Pb({sup 55}Mn,2n){sup 261}Bh reactions were also observed and are presented as partial excitation functions. The measured decay properties correspond well with existing experimental data. We compare these experimental results to cross section predictions from a model by Swiatecki et al. and discuss entrance channel effects on the magnitude of 1n cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Updated MiniBooNE neutrino oscillation results with increased data and new background studies

The MiniBooNE experiment at Fermilab reports a total excess of $638.0 \pm 132.8$ electron-like events ($4.8 \sigma$) from a data sample corresponding to $18.75 \times 10^{20}$ protons-on-target in neutrino mode, which is a 46% increase in the data sample with respect to previously published results, and $11.27 \times 10^{20}$ protons-on-target in antineutrino mode. The additional statistics allow several studies to address questions on the source of the excess. First, we provide two-dimensional plots in visible energy and cosine of the angle of the outgoing lepton, which can provide valuable input to models for the event excess. Second, we test whether the excess may arise from photons that enter the detector from external events or photons exiting the detector from $\pi^0$ decays in two model independent ways. Beam timing information shows that almost all of the excess is in time with neutrinos that interact in the detector. The radius distribution shows that the excess is distributed throughout the volume, while tighter cuts on the fiducal volume increase the significance of the excess. We conclude that models of the event excess based on entering and exiting photons are disfavored.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Primordial non-Gaussianity in multiscalar inflation

We give a concise formula for the non-Gaussianity of the primordial curvature perturbation generated on superhorizon scales in the multiscalar inflation model without assuming slow-roll conditions. This is an extension of our previous work. Using this formula, we study the generation of non-Gaussianity for the double inflation models in which the slow-roll conditions are temporarily violated after horizon exit, and we show that the nonlinear parameter f{sub NL} for such models is suppressed by the slow-roll parameters evaluated at the time of horizon exit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Supersymmetric flat direction decay: The prospect of particle production and preheating investigated in the unitary gauge

We look at the possibility of nonperturbative particle production after inflation from supersymmetry flat directions produced by rotating eigenstates thereby avoiding the standard adiabaticity conditions. This might lead to preheating and prevent the delay of thermalization of the Universe. We investigate the flat directions LLE{sup c} and U{sup c}D{sup c}D{sup c} and find no particle production. These two directions are very important, since they have been named as possible candidates for being the inflaton. We investigate QLQLQLE{sup c} and find particle production and therefore the possibility of preheating. We investigate the LLE{sup c} and U{sup c}D{sup c}D{sup c} directions appearing simultaneously, and find no production. Finally, we investigate LLE{sup c} and QLD{sup c} simultaneously - with one L-field in common. Here we do find particle production and therefore the possibility of preheating. This means that if supersymmetry flat directions are to delay thermalization and thus explain the (lack of) gravitino production, it is necessary to explain why complicated directions as QLQLQLE{sup c} are not exited, and why combinations like LLE{sup c} and QLD{sup c} are not both exited.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Attraction towards an inflection point inflation

Many models of high-energy physics possess metastable vacua. It is conceivable that the Universe can get trapped in such a false vacuum, irrespective of its origin and prior history, at an earlier stage during its evolution. The ensuing false vacuum inflation results in a cold and empty universe and has a generic graceful exit problem. We show that an inflection point inflation along the flat directions of the minimal supersymmetric standard model (MSSM) can resolve this graceful exit problem by inflating the bubble, which nucleates out of a false vacuum. The important point is that the initial condition for an MSSM inflation can be naturally realized, due to an attractor behavior toward the inflection point. We investigate these issues in detail and also present an example where metastable vacua, hence the false vacuum inflation, can happen within the MSSM.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Generating primordial black holes via hilltop-type inflation models

It has been shown that black holes would have formed in the early Universe if, on any given scale, the spectral amplitude of the cosmic microwave background exceeds P{sub {zeta}}{approx}10{sup -4}. This value is within the bounds allowed by astrophysical phenomena for the small scale spectrum of the cosmic microwave background, corresponding to scales which exit the horizon at the end of slow-roll inflation. Previous work by Kohri et al. (2007) showed that for black holes to form from a single field model of inflation, the slope of the potential at the end of inflation must be flatter than it was at horizon exit. In this work we show that a phenomenological hilltop model of inflation, satisfying the Kohri et al. criteria, could lead to the production of black holes, if the power of the inflaton self-interaction is less than or equal to 3, with a reasonable number or e-folds. We extend our analysis to the running mass model, and confirm that this model results in the production of black holes, and by using the latest WMAP year 5 bounds on the running of the spectral index, and the black hole constraint we update the results of Leach et al. (2000) excluding more of parameter space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On infrared and ultraviolet divergences of cosmological perturbations

We study a consistent infrared and ultraviolet regularization scheme for the cosmological perturbations. The infrared divergences are cured by assuming that the Universe undergoes a transition between a nonsingular preinflationary, radiation-dominated phase and a slow-roll inflationary evolution. The ultraviolet divergences are eliminated via adiabatic subtraction. A consistent regularization of the field fluctuations through this transition is obtained by performing a mode matching for both the gauge invariant Mukhanov variable and its adiabatic expansion. We show that these quantities do not generate ultraviolet divergences other than the standard ones, when evolving through the matching time. We also show how the DeWitt-Schwinger expansion, which can be used to construct the counter-terms regularizing the ultraviolet divergences, ceases to be valid well before horizon exit of the scales of interest. Thus, such counter-terms should not be used beyond the time of the horizon exit and it is unlikely that the observed power spectrum is modified by adiabatic subtraction, as claimed in some literature. On the contrary, the infrared regularization might have an impact on the observed spectrum, and we briefly discuss this possibility.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Absorption of charged particles in perfectly matched layers by optimal damping of the deposited current

Perfectly matched layers (PMLs) are widely used in particle-in-cell simulations, in order to absorb electromagnetic waves that propagate out of the simulation domain. However, when charged particles cross the interface between the simulation domain and the PMLs, a number of numerical artifacts can arise. Here, in order to mitigate these artifacts, we introduce a PML algorithm whereby the current deposited by the macroparticles in the PML is damped by an analytically derived optimal coefficient. The benefits of this algorithm are illustrated in practical simulations. In particular, it is shown that this algorithm is well suited for particles exiting the box in near-normal incidence, in the sense that the fields behave as if the exiting particle is propagating in an infinite vacuum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Self-Guiding of Ultrashort, Relativistically Intense Laser Pulses through Underdense Plasmas in the Blowout Regime

The self-guiding of relativistically intense but ultrashort laser pulses has been experimentally investigated as a function of laser power, plasma density, and plasma length in the blowout regime. The extent of self-guiding, observed by imaging the plasma exit, is shown to be limited by nonlinear pump depletion with observed self-guiding of over tens of Rayleigh lengths. Spectrally resolved images of the plasma exit show evidence consistent with self-guiding in the plasma wake. Minimal losses of the self-guided pulse resulted when the initial spot size was matched to the blowout radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of competition of spherical and deformed shells in quasifission of superheavy nuclei

Quasifission and fusion-fission represent the two most likely reaction outcomes to occur postcapture in collisions leading to superheavy nuclei. As such, understanding these mechanisms and how they relate to one another is key to understanding the intricate dynamics that drive the formation (or dissociation) of the nascent compound nuclei formed in fusion reactions. This understanding directly translates to a more informed picture of suitable reaction partners and can provide vital information for experimental efforts to study the physics and chemistry of superheavy elements. In this work we report results from time-dependent simulations of 48 Ca + 238 U and 50 Ti + 236 Th reactions at incident energies just above the Coulomb barrier with a focus on the quasifission process that prevent the formation of a fully equilibrated 286 Cn compound nucleus. We study these reactions systematically and consider a wide range of initial configurations to extract a robust estimate of primary fragment yields for the quasifission process. Multiple preferred exit channels are observed, with both spherical and deformed shell effects in the heavy and light fragments driving contributions to the production yields depending on the initial configuration of the system. Orientation effects of the deformed actinide targets are found to be a primary driver of which exit channels are populated. Here, the impact of moving away from a doubly magic projectile is explored with implications towards the reactions considered for current and future superheavy searches.

Gumbel, Richard [Michigan State University, East L↗

Diffraction imaging for in situ characterization of double-crystal X-ray monochromators

Imaging of the Bragg-reflected X-ray beam is proposed and validated as an in situ method for characterization of the performance of double-crystal monochromators under the heat load of intense synchrotron radiation. A sequence of images is collected at different angular positions on the reflectivity curve of the second crystal and analyzed. The method provides rapid evaluation of the wavefront of the exit beam, which relates to local misorientation of the crystal planes along the beam footprint on the thermally distorted first crystal. The measured misorientation can be directly compared with the results of finite element analysis. The imaging method offers an additional insight into the local intrinsic crystal quality over the footprint of the incident X-ray beam.

cryogenic cooling↗

PRESAGE: Protecting Structured Address Generation against Soft Errors

Modern computer scaling trends in pursuit of larger component counts and power efficiency have, unfortunately, lead to less reliable hardware and consequently soft errors escaping into application data ("silent data corruptions"). Techniques to enhance system resilience hinge on the availability of efficient error detectors that have high detection rates, low false positive rates, and lower computational overhead. Unfortunately, efficient detectors to detect faults during address generation (to index large arrays) have not been widely researched. We present a novel lightweight compiler-driven technique called PRESAGE for detecting bit-flips affecting structured address computations. A key insight underlying PRESAGE is that any address computation scheme that flows an already incurred error is better than a scheme that corrupts one particular array access but otherwise (falsely) appears to compute perfectly. Enabling the flow of errors allows one to situate detectors at loop exit points, and helps turn silent corruptions into easily detectable error situations. Our experiments using PolyBench benchmark suite indicate that PRESAGE-based error detectors have a high error-detection rate while incurring low overheads.

Sharma, Vishal C.↗

A Homotopy-Based Method for Robust Computation of Controlling Unstable Equilibrium Points

This paper proposes a homotopy-based method for efficiently computing and precisely determining controlling unstable equilibrium points (CUEPs) in transient stability analysis and screening using direct methods. The proposed method is intended to overcome potential numerical convergence problems associated with computing CUEPs. These convergence problems are mostly due to irregularities in the region of convergence of CUEPs which make it difficult to determine suitable initial points. The most commonly used initial points in computing CUEPs are minimum gradient points (MGPs) on the stability boundary which in turn rely on the determination of exit points (EPs-points at which sustained-fault trajectories exit system stability boundaries). However, determination of MGPs and EPs are computationally involved and sophisticated numerical methods have been introduced such as stability-boundary-following procedure and shadowing method to correct the solution trajectory. The proposed method does not depend on MGPs and also does not require accurate EPs. The proposed method maps the solution from EPs to the CUEPs. The proposed method is applied on several known systems including the NE 39 bus system and the reduced WECC system and the results are provided. The results are compared with the traditional methods such as Boundary of stability region based CUEP method (BCU method).

42 ENGINEERING↗

Investigation of nozzle flow and cavitation characteristics in a diesel injector.

Cavitation and turbulence inside a diesel injector play a critical role in primary spray breakup and development processes. The study of cavitation in realistic injectors is challenging, both theoretically and experimentally, since the associated two-phase flow field is turbulent and highly complex, characterized by large pressure gradients and small orifice geometries. We report herein a computational investigation of the internal nozzle flow and cavitation characteristics in a diesel injector. A mixture based model in FLUENT V6.2 software is employed for simulations. In addition, a new criterion for cavitation inception based on the total stress is implemented, and its effectiveness in predicting cavitation is evaluated. Results indicate that under realistic diesel engine conditions, cavitation patterns inside the orifice are influenced by the new cavitation criterion. Simulations are validated using the available two-phase nozzle flow data and the rate of injection measurements at various injection pressures (800-1600 bar) from the present study. The computational model is then used to characterize the effects of important injector parameters on the internal nozzle flow and cavitation behavior, as well as on flow properties at the nozzle exit. The parameters include injection pressure, needle lift position, and fuel type. The propensity of cavitation for different on-fleet diesel fuels is compared with that for n-dodecane, a diesel fuel surrogate. Results indicate that the cavitation characteristics of n-dodecane are significantly different from those of the other three fuels investigated. The effect of needle movement on cavitation is investigated by performing simulations at different needle lift positions. Cavitation patterns are seen to shift dramatically as the needle lift position is changed during an injection event. The region of significant cavitation shifts from top of the orifice to bottom of the orifice as the needle position is changed from fully open (0.275 mm) to nearly closed (0.1 mm), and this behavior can be attributed to the effect of needle position on flow patterns upstream of the orifice. The results demonstrate the capability of the cavitation model to predict cavitating nozzle flows in realistic diesel injectors and provide boundary conditions, in terms of vapor fraction, velocity, and turbulence parameters at the nozzle exit, which can be coupled with the primary breakup simulation.

33 ADVANCED PROPULSION SYSTEMS↗

Fuel Stratification Influence on NO x Emission in a Premixed Axial Reacting Jet-in-Crossflow at High Pressure

Three reacting jet-in-crossflow (JiC) methane/air flames were numerically investigated in a lean axially staged combustor at a pressure of five atmospheres. A detailed chemistry Star-CCM+ computational fluid dynamics (CFD) model was used with 53 species considered and the result of turbulence-governed finite-rate modeling was validated with in-house experimental data. An optically accessible test section features three side windows, allowing local flow and flame analysis with particle image velocimetry (PIV) and CH* chemiluminescence as well as pressure, temperature, and species exit measurements. The research objective was to predict and verify NO x formation of the premixed 12.7 mm axial jet. Three headend temperature levels were investigated along with three premixed jets at lean (φ Jet = 0.75), near-stoichiometric (φ Jet = 1.07), and rich (φ Jet = 1.78) axial fuel line equivalence ratio. Based on the matching exit emission concentration, global emission benefits were investigated by adjustment of the fuel stratification. The perfectly premixed methane/air flames of this study were shown to ignite at the lee-side of the jet. For the elevated headend temperature level T = 1800 K, the flame extended beyond the windward jet trajectory and caused high axial NO production. For industry application, a firing temperature of 1920 K was achieved with a NO x optimized fuel split of 25%, combining a lean headend (φ Headend = 0.61) with a rich (φ Jet = 1.78) jet equivalence ratio. As a result, this operating point allowed minimization of the combustor residence time at temperatures above 1700 K as well as combustion in a compact flame at the jet lee-side along the counter rotating vortex pair.

03 NATURAL GAS↗

A Method to Design and Optimize Axial Flow Cyclones for Gas–Liquid Separation

This article provides a detailed design guide, optimization, and performance assessment for air–water separation of an axial flow cyclone. Axial flow cyclones (also known as swirl tube demisters, mist eliminators, or Austin–Write cyclones) have a range of applications in several different industries. This method of gas–liquid separation offers many benefits. Among these are high liquid separation efficiencies (near 99%) and an inline design that allows them to be more easily fitted into existing piping structures. Despite these benefits, there are several design parameters that have not been optimized for performance in wastewater purification applications. This research fills the gap in the literature by quantifying the effect of new design parameters on water collection efficiency, η water collection , and the air bypass efficiency, η air bypass , defined as the ratio of the air mass flowrate exiting through the desired air outlet over the inlet air mass flowrate. A set of wide-ranging experiments were conducted to study the effects of gas–liquid flow rates, tube geometry, and relative injection angles to optimize the water collection and air bypass efficiencies. The water collection efficiency exceeded 99.8% when the liquid streamline came in direct contact with the water drainage exit. An empirical correlation was developed to predict the swirl pitch as a function of the above design parameters. Predictions from the correlation were within 10% of the experimental results. The correlation can be used to design highly efficient in-line gas–liquid separators.

Engineering↗