Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ENERGY SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Diagnosing up-scattered deuterium–tritium fusion neutrons produced in burning plasmas at the National Ignition Facility (invited)

In the push to higher performance fusion plasmas, two critical quantities to diagnose are α-heat deposition that can improve and impurities mixed into the plasma that can limit performance. In high-density, highly collisional inertial confinement fusion burning plasmas, there is a significant probability that deuterium–tritium (DT) fusion products, 14.1 MeV neutrons and 3.5 MeV α-particles, will collide with and deposit energy onto (“up-scatter”) surrounding deuterium and tritium fuel ions. These up-scattered D and T ions can then undergo fusion while in-flight and produce an up-scattered neutron (15–30 MeV). These reaction-in-flight (RIF) neutrons can then be uniquely identified in the measured neutron energy spectrum. Further, the magnitude, shape, and relative size of this spectral feature can inform models of stopping-power in the DT plasma and hence is directly proportional to α-heat deposition. In addition, the RIF spectrum can be related to mix into the burning fuel, particularly relevant for high-Z shell and other emerging National Ignition Facility platforms. The neutron time-of-flight diagnostic upgrades needed to obtain this small signal, ~10 –5 times the primary DT neutron peak, will be discussed. Results from several gain > 1 implosions will be shown and compared to previous RIF spectra. Finally, comparisons of experimental data to a simplified computational model will be made.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Surface science insight note: Optimizing XPS instrument performance for quantification of spectra

X-ray photoelectron spectroscopy (XPS) provides quantitative information from photoemission peaks and shapes observed within the background due to the inelastic scattering of photoelectrons. To quantify the signal, both photoemission peaks and background in spectra must be adjusted for instrumental transmission variations that are a consequence of changes in efficiency when recording electrons with different kinetic energy. While it is generally assumed that correcting spectroscopic data for transmission is a necessary part of quantification by XPS, there are consequences for the quantification of spectra measured using an instrument for which transmission has significant curvature. In this Insight, the implications of curvature in transmission characteristics are discussed and a method based on XPS microscopy is proposed that ensures the transmission response of an instrument is free from significant curvature. An example of an instrument for which a flat transmission response is presented is achieved through collecting spectra using lens modes designed to measure stigmatic images.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hadronic resonance production and interaction in p-Pb collisions at LHC energies in EPOS3

Using the EPOS3 model with the Ultrarelativistic Quantum Molecular Dynamics (UrQMD) model to describe the hadronic phase, we study the production of short-lived hadronic resonances and the modification of their yields and p T spectra in p-Pb collisions at √sNN= 5.02 TeV. High-multiplicity p-Pb collisions exhibit similar behavior to midperipheral Pb-Pb collisions at LHC energies, and we find indications of a short-lived hadronic phase in p-Pb collisions that can modify resonance yields and p T spectra through scattering processes. The evolution of resonance production is investigated as a function of the system size, which is related to the lifetime of the hadronic phase in order to study the onset and evolution of scattering effects in p-Pb collisions. We also study hadron production separately in the core and corona parts of these collisions and explore how this division affects the total particle yields as the system size increases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Neutrino signal from proto-neutron star evolution: Effects of opacities from charged-current–neutrino interactions and inverse neutron decay

In this work, we investigate the impact of charged-current–neutrino processes on the formation and evolution of neutrino spectra during the deleptonization of proto-neutron stars. To this end we develop the full kinematics of these reaction rates consistent with the nuclear equation of state, including weak magnetism contributions. This allows us to systematically study the impact of inelastic contributions and weak magnetism on the $ν_e$ and $\bar{ν}_e$ luminosities and average energies. Furthermore, we explore the role of the inverse neutron decay, also known as the direct Urca process, on the emitted spectra of $\bar{ν}_e$. This process is commonly considered in the cooling scenario of cold neutron stars but has so far been neglected in the evolution of hot proto-neutron stars. We find that the inverse neutron decay becomes the dominating opacity source for low-energy $\bar{ν}_e$. Accurate three-flavor Boltzmann neutrino transport enables us to relate the magnitude of neutrino fluxes and spectra to details of the treatment of weak processes. This allows us to quantify the corresponding impact on the conditions relevant for the nucleosynthesis in the neutrino-driven wind, which is ejected from the proto-neutron star surface during the deleptonization phase.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Density Functional Theory Study of Controllable Optical Absorptions and Magneto-Optical Properties of Magnetic CrI 3 Nanoribbons: Implications for Compact 2D Magnetic Devices

A chromium triiodide (CrI 3 ) monolayer has an interesting ferromagnetic ground-state. In this work, we calculate band structures and magnetic moments of tensile-strained and bent zigzag CrI 3 nanoribbons with density functional theory. The edge iodine atoms form flat low-lying conduction bands and couple with chromium atoms ferromagnetically, while the non-edge iodine atoms weakly couple antiferromagnetically. Narrow CrI 3 nanoribbons have two locally stable magnetic moment orientations, namely out-of-plane and in-plane (along the nanoribbon periodic direction) configurations. This enables four magnetization states in CrI 3 nanoribbons, including two out-of-plane ones (up and down) and two in-plane ones (forward and backward along the nanoribbon periodical direction), increasing the operating controllability. Based on the one-dimensional Ising spin chain model, the spin correlation length of the narrow CrI 3 nanoribbon is estimated as about 10 Å at its estimated Curie temperature of 27 Kelvin, which is lower than the measured 45 Kelvin of the monolayer CrI 3 . The optical absorption and magneto-optical properties of CrI 3 nanoribbons are investigated with many-body perturbation GW-BSE (Bethe-Salpeter equation), including magnetic dichroism, Faraday and magneto-optical Kerr effects. Here, the low-energy dark excitons are mainly from transitions between electrons and holes with unlike spins and are non-Frenkel-like, while the bright excitons have mixed spin configurations. The intrinsic lifetime of excitons can be over one nanosecond, suitable for quantum information processes. Tensile strains and bending manifestly modulate the absorption spectra and magneto-optical properties of CrI 3 nanoribbons within a technologically important photon energy-range of ~1.0-2.0 eV. The CrI 3 nanoribbons can be used in 1D or 2D magnetic storage nanodevices, tunable magnetic optoelectronics, and spin-based quantum information controls.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Refining the thermochemical properties of CF, SiF, and their cations by combining photoelectron spectroscopy, quantum chemical calculations, and the Active Thermochemical Tables approach

Fluorinated species have a pivotal role in semiconductor material chemistry and some of them have been detected beyond the Earth's atmosphere. Achieving good energy accuracy on fluorinated species using quantum chemical calculations has long been a challenge. In addition, obtaining direct experimental thermochemical quantities has also proved difficult. Here, we report the threshold photoelectron and photoion yield spectra of SiF and CF radicals generated with a fluorine reactor. The spectra were analysed with the support of ab initio calculations, resulting in new experimental values for the adiabatic ionisation energies of both CF (9.128 ± 0.006 eV) and SiF (7.379 ± 0.009 eV). Using these values, the underlying thermochemical network of Active Thermochemical Tables was updated, providing further refined enthalpies of formation and dissociation energies of CF, SiF, and their cationic counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Demonstration of an AI-driven workflow for dynamic x-ray spectroscopy

X-ray absorption near edge structure (XANES) spectroscopy is a powerful technique for characterizing the chemical state and symmetry of individual elements within materials, but requires collecting data at many energy points which can be time-consuming. While adaptive sampling methods exist for efficiently collecting spectroscopic data, they often lack domain-specific knowledge about the structure of XANES spectra. Here we demonstrate a knowledge-injected Bayesian optimization approach for adaptive XANES data collection that incorporates understanding of spectral features like absorption edges and pre-edge peaks. We show this method accurately reconstructs the absorption edge of XANES spectra using only 15–20% of the measurement points typically needed for conventional sampling, while maintaining the ability to determine the x-ray energy of the sharp peak after the absorption edge with errors less than 0.03 eV, the absorption edge with errors less than 0.1 eV; and overall root-mean-square errors less than 0.005 compared to traditionally sampled spectra. Our experiments on battery materials and catalysts demonstrate the method’s effectiveness for both static and dynamic XANES measurements, improving data collection efficiency and enabling better time resolution for tracking chemical changes. This approach advances the degree of automation in XANES experiments, reducing the common errors of under- or over-sampling points near the absorption edge and enabling dynamic experiments that require high temporal resolution or limited measurement time.

Bayesian optimization↗
DOE OSTI2020

Kβ X-ray Emission Spectroscopy as a Probe of Cu(I) Sites: Application to the Cu(I) Site in Preprocessed Galactose Oxidase

Cu(I) active sites in metalloproteins are involved in O 2 activation, but their O 2 reactivity is difficult to study due to the Cu(I) d 10 closed shell which precludes the use of conventional spectroscopic methods. Kβ X-ray emission spectroscopy (XES) is a promising technique for investigating Cu(I) sites as it detects photons emitted by electronic transitions from occupied orbitals. Here, we demonstrate the utility of Kβ XES in probing Cu(I) sites in model complexes and a metalloprotein. Using Cu(I)Cl, emission features from double-ionization (DI) states are identified using varying incident X-ray photon energies, and a reasonable method to correct the data to remove DI contributions is presented. Kβ XES spectra of Cu(I) model complexes, having biologically relevant N/S ligands and different coordination numbers, are compared and analyzed, with the aid of density functional theory (DFT) calculations, to evaluate the sensitivity of the spectral features to the ligand environment. While the low-energy Kβ 2,5 emission feature reflects the ionization energy of ligand np valence orbitals, the high-energy Kβ 2,5 emission feature corresponds to transitions from molecular orbitals (MOs) having mainly Cu 3d character with the intensities determined by ligand-mediated d–p mixing. A Kβ XES spectrum of the Cu(I) site in preprocessed galactose oxidase (GO pre ) supports the 1Tyr/2His structural model that was determined by our previous X-ray absorption spectroscopy and DFT study. Finally, the high-energy Kβ 2,5 emission feature in the Cu(I)-GO pre data has information about the MO containing mostly Cu 3d x 2 –y 2 character that is the frontier molecular orbital (FMO) for O 2 activation, which shows the potential of Kβ XES in probing the Cu(I) FMO associated with small-molecule activation in metalloproteins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Aluminum-Based Superconducting Tunnel Junction Sensors for Nuclear Recoil Spectroscopy

The BeEST experiment is searching for sub-MeV sterile neutrinos by measuring nuclear recoil energies from the decay of 7 Be implanted into superconducting tunnel junction (STJ) sensors. The recoil spectra are affected by interactions between the radioactive implants and the sensor materials. We are therefore developing aluminum-based STJs (Al-STJs) as an alternative to existing tantalum devices (Ta-STJs) to investigate how to separate material effects in the recoil spectrum from potential signatures of physics beyond the Standard Model. Three iterations of Al-STJs were fabricated. The first had electrode thicknesses similar to existing Ta-STJs. They had low responsivity and reduced resolution, but were used successfully to measure 7 Be nuclear recoil spectra. The second iteration had STJs suspended on thin SiN membranes by backside etching. These devices had low leakage current, but also low yield. The final iteration was not backside etched, and the Al-STJs had thinner electrodes and thinner tunnel barriers to increase signal amplitudes. These devices achieved 2.96 eV FWHM energy resolution at 50 eV using a pulsed 355 nm (~3.5 eV) laser. These results establish Al-STJs as viable detectors for systematic material studies in the BeEST experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Spectral line-shape in collinear laser spectroscopy after atomic charge exchange

Collinear laser spectroscopy experiments on fast, neutral beams have been extensively used for studies on short-lived radioactive nuclei, taking advantage of its high sensitivity. The resulting resonance line-shape is known to show significant distortion, due to the energy exchange during the charge-exchange neutralization process, which can cause large systematic uncertainty in the determined centroid. A model for the line shape was constructed and simulated to be compared to measured Al, Si, and Ni hyperfine spectra. It is shown that the distortion is caused mainly by the transfer of electron into many different energy levels in the projectile atom and subsequent decays, rather than secondary inelastic collisions, which were often assumed in the line shape analysis before. Furthermore, the model can also be applied to other projectile–alkali pairs, providing a reliable line-shape with less fitting parameters than conventional phenomenological models.

Atom↗
DOE OSTI2022

Plasmon spectroscopy for the determination of Ti 3 C 2 T x MXene few layer stacks architecture

Like many 2D materials, numerous properties of MXene multilayers, and especially the most popular one Ti 3 C 2 T x , have been shown to significantly depend on their architecture, i.e. the number of layers and interlayer distance. These structural parameters are thus key elements to be characterized for the analysis of MXene properties. Focusing on valence electron energy-loss spectroscopy (VEELS) as performed in a transmission electron microscope (TEM), and using density functional theory (DFT) simulations, we here analyze the layer dependent large changes in the VEEL spectra of Ti 3 C 2 T x multilayers as a probe of their total thickness, and emphasize the bulk plasmon energy sensitivity to interlayer distance. Together these findings allow to directly quantify the absolute number of layers in a Ti 3 C 2 T x stack up to ~10 nm thickness and give access to interlayer distance modifications with sub-angström sensitivity, evidencing VEELS as a powerful method for the characterization of MXene multilayers on the nanometer scale. We expect these results to be relevant for the study of structure/properties correlations in this class of materials, especially with the development of in situ or environmental TEM experiments.

Materials Science↗
DOE OSTI2022

Formation and detection of metastable formic acid in a supersonic expansion: High resolution infrared spectroscopy of the jet-cooled cis -HCOOH conformer

High-resolution direct absorption infrared spectra of metastable cis-formic acid (HCOOH) trapped in a cis-well resonance behind a 15 kcal/mol barrier are reported for the first time, with the energetically unstable conformer produced in a supersonic slit plasma expansion of trans-formic acid/H 2 mixtures. We present a detailed high-resolution rovibrational analysis for cis-formic acid species in the OH stretch (ν 1 ) fundamental, providing first precision vibrational band origin, rotational constants, and term values, which in conjunction with ab initio calculations at the couple-cluster with single, double, and perturbative triple [CCSD(T)]/ANOn (n = 0, 1, 2) level support the experimental assignments and establish critical points on the potential energy surface for internal rotor trans-to-cis isomerization. Relative intensities for a- and b-type transitions observed in the spectra permit the transition dipole moment components to be determined in the body fixed frame and prove to be in good agreement with ab initio CCSD(T) theoretical estimates but in poor agreement with simple bond-dipole predictions. As a result, the observed signal dependence on H 2 in the discharge suggests the presence of a novel H atom radical chemical mechanism for strongly endothermic “up-hill” internal rotor isomerization between trans- and cis-formic acid conformers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nuclear properties with semilocal momentum-space regularized chiral interactions beyond N 2 LO

We present a comprehensive investigation of few-nucleon systems as well as light and medium-mass nuclei up to A = 48 using the current Low Energy Nuclear Physics International Collaboration two-nucleon interactions in combination with the third-order (N 2 LO) three-nucleon forces. To address the systematic overbinding of nuclei starting from A ≈ 10 found in our earlier study utilizing the N 2 LO two- and three-nucleon forces, we take into account higher-order corrections to the two-nucleon potentials up through fifth order in chiral effective field theory. Here, the resulting Hamiltonian can be completely determined using the A = 3 binding energies and selected nucleon-deuteron cross sections as input. It is then shown to predict other nucleon-deuteron scattering observables and spectra of light p-shell nuclei, for which a detailed correlated truncation error analysis is performed, in agreement with experimental data. Moreover, the predicted ground state energies of nuclei in the oxygen isotopic chain from 14 O to 26 O as well as 40 Ca and 48 Ca show a remarkably good agreement with experimental values, given that the Hamiltonian is fixed completely from the A ≤ 3 data, once the fourth-order (N 3 LO) corrections to the two-nucleon interactions are taken into account. On the other hand, the charge radii are found to be underpredicted by ≈10% for the oxygen isotopes and by almost 20% for 40 Ca and 48 Ca.

20 ≤ A ≤ 38↗
DOE OSTI2022

Determining critical points to control electric lighting to meet circadian lighting requirements and minimize energy use

Designing electric lighting systems to meet circadian lighting requirements may raise light levels and consequently energy use compared to existing practices. To reduce energy use, electric lighting can be controlled to be dimmed or turned off when sufficient daylight levels are available in space. This requires input from one or a few critical measurement points. However, it is unclear how critical points can be determined to ensure that all occupants receive the needed light levels while reducing electric lighting energy. This paper discusses three approaches for selecting critical points and utilizes annual daylight simulations modified to account for sky spectra, and coupled with spectral electric lighting simulations. Among the three evaluated approaches, the use of continuous daylight autonomy (modified to use EML measured at eye positions) is helpful for estimating electric lighting energy for dimmable electric lighting systems, and for identifying energy-saving strategies.

Abboushi, Belal K.↗
DOE OSTI2023

Origins of the high-energy electroluminescence peaks in long-wavelength (~495–685 nm) InGaN light-emitting diodes

We investigate the unexpected high-energy electroluminescence (EL) peaks observed in long-wavelength InGaN light-emitting diodes (LEDs) with ground state emission peaks between ~495 and 685 nm by studying the EL spectra of LEDs with varying quantum well (QW) thicknesses and indium compositions. In addition to the ground state emission, two high-energy emission peaks were observed in the LEDs with thick QWs and high indium compositions. The less energetic high-energy emission peak (2.4–2.6 eV) is attributed to the optical transitions involving excited states. Factors influencing the excited state transitions, such as the QW thickness and indium compositions, were also examined by simulations to better understand the occurrence of these transitions. The more energetic high-energy emission peak (2.8–3.1 eV) originates from V-defect sidewalls and was verified through micro-photoluminescence measurements. Identification of the high-energy emission peaks is essential as it enables targeted epitaxial or growth optimizations to minimize or eliminate these undesirable emission peaks. In conclusion, this work demonstrates the importance of using thin QWs to suppress the unwanted high-energy emissions due to excited state transitions and V-defect sidewalls for long-wavelength InGaN LEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Machine learning based unfolding of x-ray spectra from filter stack spectrometer data

We demonstrate the application of neural networks to perform x-ray spectra unfolding from data collected by filter stack spectrometers. A filter stack spectrometer consists of a series of filter-detector pairs, where the detectors behind each filter measure the energy deposition through each layer as photo-stimulated luminescence (PSL). The network is trained on synthetic data, assuming x-rays of energies < 1 MeV and of two different distribution functions (Maxwellian and Gaussian) and the corresponding measured PSL values obtained from five different filter stack spectrometer designs. Predicted unfolds of single distributions are near identical reproductions of the ground truth spectra, with differences in the values lower than 20% at the higher energy end in some cases. The neural network has also demonstrated robustness to experimental measurement errors of < 5% and some capability of performing unfolds for linear combinations of the two distributions without previous training. The network can perform unfolds at rates > 1 Hz, ideal for application to some high-repetition-rate systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Effect of the Electric Field Strength on the Energy Resolution of Cr/CdTe/Pt Detectors

The electrical and spectrometric characteristics of the Cr/cadmium telluride (CdTe)/Pt structure with a metal-semiconductor type rectifying contact, used in X/γ-ray detectors, are investigated. For the detectors fabrication, chlorine-doped CdTe crystals with a resistivity of (3-6) × 10 9 Ω cm at 293 K were used. 137Cs spectra and their modification by applied voltage change were obtained. The reverse bias voltage corresponding to the best energy resolution of the Cr/CdTe/Pt structure is experimentally determined. The concentration of impurities N in the crystal, which determines the thickness of the space-charge region, is estimated. Finally, an energy resolution deterioration of the Cr/CdTe/Pt structure with increasing voltage is explained due to the Gunn effect.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Calibrating two jets at once

Jet-energy calibration is an important aspect of many measurements and searches at the LHC. Currently, these calibrations are performed on a per-jet basis, i.e., agnostic to the properties of other jets in the same event. In this work, we propose taking advantage of the correlations induced by momentum conservation between jets in order to improve their jet-energy calibration. By fitting the p T asymmetry of dijet events in simulation, while remaining agnostic to the p T spectra themselves, we are able to obtain correlation-improved maximum likelihood estimates. This approach is demonstrated with simulated jets from the CMS detector, yielding a 3%–5% relative improvement in the jet-energy resolution, corresponding to a quadrature improvement of approximately 35%. Published by the American Physical Society 2024

Gambhir, Rikab (ORCID:0000000251080448)↗