Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Disks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Does SV Centauri harbor an accretion disk?

Light synthesis simulation of SV Cen UBV photometry by Drechsel et al. (1982) exhibits appreciable residuals. These residuals, together with large Roche model overcontact but also large calculated intercomponent temperature difference, suggests that the light synthesis Roche model is inapplicable. The substantial rate of period change indicates rapid mass transfer in a pre-mass-reversal system. An accretion disk surrounding a nearly normal size secondary provides a possible explanation of the photometric residuals. Excess radiation longward of 200 nm, by comparison with a spectrum synthesis simulation, provides qualitative support for the model. This model is inconsistent with the Lubow-Shu criterion for accretion disk formation. The text provides a speculative scenario showing why an accretion disk may nonetheless form.

Linnell, Albert P.↗

Hybrid accretion disks in active galactic nuclei. I - Structure and spectra

A unified treatment is presented of the two distinct states of vertically thin AGN accretion disks: a cool (about 10 to the 6th K) optically thick solution, and a hot (about 10 to the 9th K) optically thin solution. A generalized formalism and a new radiative cooling equation valid in both regimes are introduced. A new luminosity limit is found at which the hot and cool alpha solutions merge into a single solution of intermediate optical depth. Analytic solutions for the disk structure are given, and output spectra are computed numerically. This is used to demonstrate the prospect of fitting AGN broadband spectra containing both the UV bump as well as the hard X-ray and gamma-ray tail, using a single accretion disk model. Such models are found to make definite predictions about the observed spectrum, such as the relation between the hard X-ray spectral index, the UV-to-X-ray luminosity ratio, and a feature of about 1 MeV.

Wandel, Amri↗

Lyman-alpha emission from young galaxy disks

An imaging survey of Ly-alpha disk absorption systems for Ly-alpha emission from the absorbing objects, which are candidate young disk galaxies, has been conducted. Limits are set to the flux in Ly-alpha from these objects of approximately 10 exp -16 ergs/sq cm s (3 sigma), which corresponds to a limit on the star formation rate of 2-7 solar masses/yr, in the absence of dust. This suggests that although disk structures form early, rapid star formation does not occur immediately, or else occurs in episodic fashion.

Cohen, Ross D.↗

Optical properties of grains in molecular clouds and accretion disks

A baseline model of the composition and abundances of grains and gases in molecular cloud cores and accretion disks around young stars is defined by employing: a wide range of astronomical data and theory; the composition of primitive bodies in the solar system; and solar elemental abundances. It is proposed that in the coldest portions of these objects the major grain species include amorphous olivine, amorphous orthopyroxene, volatile and refractory organics, water ice, troilite, and metallic iron. Using a combination of laboratory measurements of optical constants and asymptotic theory, values of the real and imaginary indices of refraction of these grain species over a wavelength range that runs from the vacuum UV to the radio domain are derived. Auxiliary information for these grain species, such as their vaporization temperatures bulk densities, and their fractional abundances by mass. The above information on grain properties in molecular cloud cores and accretion disks is used to estimate the Rosseland mean opacity of the grains in both environments and the IR and microwave opacity of grains in accretion disks.

Pollack, J. B.↗

Numerical simulation of fluid flow and heat transfer in a thin liquid film over a stationary and rotating disk and comparison with experimental data

In the first section, improvements in the theoretical model and computational procedure for the prediction of film height and heat-transfer coefficient of the free surface flow of a radially-spreading thin liquid film adjacent to a flat horizontal surface of finite extent are presented. Flows in the presence and absence of gravity are considered. Theoretical results are compared to available experimental data with good agreement. In the presence of gravity, a hydraulic jump is present, isolating the flow into two regimes: supercritical upstream from the jump and subcritical downstream of it. In this situation, the effects of surface tension are important near the outer edge of the disk where the fluid experiences a free fall. A region of flow separation is present just downstream of the jump. In the absence of gravity, no hydraulic jump or separated flow region is present. The variation of the heat-transfer coefficient for flows in the presence and absence of gravity are also presented. In the second section, the results of a numerical simulation of the flow field and associated heat transfer coefficients are presented for the free surface flow of a thin liquid film adjacent to a horizontal rotating disk. The computation was performed for different flow rates and rotational velocities using a 3-D boundary-fitted coordinate system. Since the geometry of the free surface is unknown and dependent on flow rate, rate of rotation, and other parameters, an iterative procedure had to be used to ascertain its location. The computed film height agreed well with existing experimental measurements. The flow is found to be dominated by inertia near the entrance and close to the free surface and dominated by centrifugal force at larger radii and adjacent to the disk. The rotation enhances the heat transfer coefficient by a significant amount.

Faghri, Amir↗

Performance evaluation of redundant disk array support for transaction recovery

Redundant disk arrays provide a way of achieving rapid recovery from media failures with a relatively low storage cost for large scale data systems requiring high availability. Here, we propose a method for using redundant disk arrays to support rapid recovery from system crashes and transaction aborts in addition to their role in providing media failure recovery. A twin page scheme is used to store the parity information in the array so that the time for transaction commit processing is not degraded. Using an analytical model, we show that the proposed method achieves a significant increase in the throughput of database systems using redundant disk arrays by reducing the number of recovery operations needed to maintain the consistency of the database.

Mourad, Antoine N.↗

Turbine disk cavity aerodynamics and heat transfer

Experiments were conducted to define the nature of the aerodynamics and heat transfer for the flow within the disk cavities and blade attachments of a large-scale model, simulating the Space Shuttle Main Engine (SSME) turbopump drive turbines. These experiments of the aerodynamic driving mechanisms explored the following: (1) flow between the main gas path and the disk cavities; (2) coolant flow injected into the disk cavities; (3) coolant density; (4) leakage flows through the seal between blades; and (5) the role that each of these various flows has in determining the adiabatic recovery temperature at all of the critical locations within the cavities. The model and the test apparatus provide close geometrical and aerodynamic simulation of all the two-stage cavity flow regions for the SSME High Pressure Fuel Turbopump and the ability to simulate the sources and sinks for each cavity flow.

Johnson, B. V.↗

Pair-density transitions in accretion disk coronae

The thermal and e(+)e(-)-pair equilibrium structure of two-temperature disk coronae above a cool (about 10 exp 6 K) disk around a black hole of 10 solar masses are investigated. Soft photons are assumed to be amply supplied from the cool disk. Two-pair thermal equilibrium points are found for a given proton column density: the low state with very small pair density and the high state dominated by pairs. Both states are thermally unstable, while for perturbations in pair density the high state is unstable and the low state is stable. Two possible scenarios are discussed for the fate of a two-temperature corona. When the proton optical depth is relatively small (e.g., less than 1) and the temperature of input soft photons is low (e.g., less than 10 exp 6 K), the corona will undergo a limit cycle between the high state and the low state on a time scale of milliseconds. As a consequence of Compton scattering of the soft photons, the emergent spectrum in the high state is rather flat with a big Wien bump at about 100 keV, whereas it is composed of a power-law component in the low state. Some observational consequences are briefly discussed in connection with the high-low spectral transition in Cyg X-1.

Kusunose, Masaaki↗

The formation of coronal regions in accretion disks

A mechanism for heating the hot low-density gas or winds above accretion disks, which is similar to that used to model chromospheric heating in the sun and other stars, is proposed. Sound waves propagating through an accretion disk are refracted away from the central plane by the strong density gradient. As they move into regions of lower density, the sound waves accelerate to form shocks, which heat the gas, leading to the formation of a hot low-density region. The steeper density gradients present in disks make the process more efficient than in stellar atmospheres. Results of hydrodynamical simulations show that waves with frequencies similar to the local Keplerian frequency lead to the most efficient heating. For the optically thin region modeled in the present study, the result is the formation of coronal regions with densities less than about 10 exp 10/cu cm, and the temperatures ranging from 10 exp 4 to 6 K over a few scale heights. It is argued that the hot low-density gas which results from the shock heating is responsible for the observed UV lines from cataclysmic variables, as well as the spatially coincidental lines of H and He I.

Murray, Stephen D.↗

Accretion disks in active galactic nuclei - Vertically averaged models

Simple models of accretion disks surrounding supermassive black holes in AGN are constructed. By considering several different opacity laws, it is shown that some conclusions arrived at by previous investigators are model-dependent. A simple technique for solving the full vertically averaged disk equations, taking into account both self-gravity and central object gravity and gas pressure and radiation pressure, is presented. The self-consistency of the standard non-self-gravitating, geometrically thin accretion disk models is discussed, and the findings of Lin and Shields (1986) that such models are valid only in a restricted parameter space are confirmed.

Cannizzo, John K.↗

The secondary outburst maximum of T Coronae Borealis - Implications for the physics of accretion disks

The hypothesis of Webbink (1976) that the accretion of a torus of matter onto a main-sequence star caused secondary maxima during the 1866 and 1946 eruptions of the recurrent nova T CrB is examined. Simple 1D calculations show that the accretion disk viscosity must increase with time to produce light curves resembling observations. It is inferred that the physical mechanism responsible for producing the viscous dissipation in the accretion disk has a fast growth rate and saturates to a viscosity parameter of order unity. The good agreement between parameters estimated from observations and those derived from a physical mechanism suggests that the growth rate instability identified by Balbus and Hawley (1991) is a promising source for accretion disk viscosity.

Cannizzo, John K.↗

Convective instability in differentially rotating disks

A normal mode analysis for nonaxisymmetric perturbations in a thin, differentially rotating disk with a vertical structure that is isothermal and convectively unstable is performed. The vertical gravity is assumed to be external and constant. The perturbation scale is assumed to be much shorter than the radius of the disk but comparable to or less than the thickness. The initial value problem is formulated in shearing coordinates. Dispersion relations are obtained for the three limiting cases of zero shear, axisymmetric perturbations, and small radial wavelengths. The full effects of shear are studied by integrating numerically the initial value problem. Nonaxisymmetric local Fourier modes are found to have a radial wavenumber that increases linearly with time in proportion to the shear times the azimuthal wavenumber. While Coriolis forces exert stabilizing effects on the convective modes, reducing their growth rate and the range of unstable wavelengths, shear has destablizing effects inasmuch as it reduces the epicyclic frequency at a given angular velocity. In a Keplerian disk, perturbations with azimuthal wavelengths about 2 times smaller than vertical wavelengths grow exponentially.

Ryu, Dongsu↗

Geometrically thin, hot accretion disks - Topology of the thermal equilibrium curves

All the possible thermal equilibrium states of geometrically thin alpha-disks around stellar-mass black holes are presented. A (vertically) one-zone disk model is employed and it is assumed that a main energy source is viscous heating of protons and that cooling is due to bremsstrahlung and Compton scattering. There exist various branches of the thermal equilibrium solution, depending on whether disks are effectively optically thick or thin, radiation pressure-dominated or gas pressure-dominated, composed of one-temperature plasmas or of two-temperature plasmas, and with high concentration of e(+)e(-) pairs or without pairs. The thermal equilibrium curves at high temperatures (greater than or approximately equal to 10 exp 8 K) are substantially modified by the presence of e(+)e(-) pairs. The thermal stability of these branches are examined.

Kusunose, Masaaki↗

Database recovery using redundant disk arrays

Redundant disk arrays provide a way for achieving rapid recovery from media failures with a relatively low storage cost for large scale database systems requiring high availability. In this paper a method is proposed for using redundant disk arrays to support rapid-recovery from system crashes and transaction aborts in addition to their role in providing media failure recovery. A twin page scheme is used to store the parity information in the array so that the time for transaction commit processing is not degraded. Using an analytical model, it is shown that the proposed method achieves a significant increase in the throughput of database systems using redundant disk arrays by reducing the number of recovery operations needed to maintain the consistency of the database.

Mourad, Antoine N.↗

Microporous Carbon Disks For Sorption Refrigerators

Slow, carefully controlled pyrolysis found to turn polyvinylidene chloride disks into carbon disks having small pores and large surface areas. Disks exhibit high adsorptivities making them useful in krypton-sorption refrigerators. Carbons made from polyvinylidene chloride have greater adsorptive capacities. Thermal instability controlled and variability of product reduced by careful control of rates of heating, heating times, and rate of final cooling.

Munukutla, Lakshmi V.↗

Magnetic disk

Magnetic disk recording was invented in 1953 and has undergone intensive development ever since. As a result of this 38 years of development, the cost per byte and the areal density have halved and doubled respectively every 2-2 1/2 years. Today, the cost per byte is lower than 10(exp -6) dollars per byte and area densities exceed 100 10(exp 6) bits per square inch. In this talk, the recent achievements in magnetic disk recording are first surveyed briefly. Then, the principal areas of current technical development are outlined. Finally, some comments are made about the future of magnetic disk recording.

Mallinson, John C.↗

Magnetic disk

Magnetic disk recording was invented in 1953 and has undergone intensive development ever since. As a result of this 38 years of development, the cost per byte and the areal density has halved and doubled, respectively every 2 to 2 1/2 years. Today, the cost per byte is lower than 10(exp -6) dollars per byte and area densities exceed 100 x 10(exp 6) bits per square inch. The recent achievements in magnetic disk recording will first be surveyed briefly. Then the principal areas of current technical development will be outlined. Finally, some comments will be made about the future of magnetic disk recording.

Mallinson, John C.↗

RAID-2: Design and implementation of a large scale disk array controller

We describe the implementation of a large scale disk array controller and subsystem incorporating over 100 high performance 3.5 inch disk drives. It is designed to provide 40 MB/s sustained performance and 40 GB capacity in three 19 inch racks. The array controller forms an integral part of a file server that attaches to a Gb/s local area network. The controller implements a high bandwidth interconnect between an interleaved memory, an XOR calculation engine, the network interface (HIPPI), and the disk interfaces (SCSI). The system is now functionally operational, and we are tuning its performance. We review the design decisions, history, and lessons learned from this three year university implementation effort to construct a truly large scale system assembly.

Katz, R. H.↗