Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Effect of the Conductive Channel Cut-Off on Operation of n{sup +}–n–n{sup +} GaN NW-Based Gunn Diode

Nowadays modern science and technology require development of efficient electromagnetic emitters covering far GHz and THz ranges. Semiconductor elements with negative differential resistance (NDR) such as Gunn diodes based on GaAs and InP are well-established powerful microwave emitters. In this work the Gunn diode structure based on single GaN nanowire with the potential of THz device development was proposed and investigated both theoretically and experimentally. According to the results of the numerical modeling, the Gunn generation can be obtained in the proposed geometry. Dependence of the doping concentration on the NW length necessary for the electrons domain formation was obtained. The nanostructures were grown via molecular beam epitaxy technique. Contacts to single nanowires were fabricated with the combination of e-beam lithography and thermal evaporation. It was shown experimentally that the volt-ampere characteristics of the GaN nanowire structure possess current saturation region. Experimental results correspond well to proposed numerical model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of Energy and Fluences of Protons Collectively Accelerated in a Luce Diode Accelerator

Plates of boron carbide B{sub 4}C were used as refractory targets for determination of energy and fluences of protons collectively accelerated in a Luce diode accelerator by control of {sup 7}Be and {sup 13}N gamma radioactivity induced by nuclear reactions {sup 10}B(p, α){sup 7}Be and {sup 12}C(p, γ){sup 13}N, respectively. The Luce diode exploited a cylindrical tungsten rod as a cathode and a polyethylene washer as an anode, producing pulsed electron beams with durations and currents of up to 100 ns and 30 kA at voltages of 250 kV. The technique allows controlling proton energies within the range of 500–1500 keV and fluences of up to 5 × 10{sup 13} protons per cm{sup 2} per pulse.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multiple-wavelength digital holographic interferometry using tunable laser diodes

Here we present multiple-wavelength digital holographic interferometry with a wide measurement range using laser diodes. Small wavelength differences can be easily realized by the wavelength tuning of laser diodes with injection current controls. A contour map of an object with a wide measurement range and a high sensitivity is demonstrated by combining a few contour maps with several measurement sensitivities. Synthetic wavelengths are calibrated using a known height difference. This alleviates the need to have high precise knowledge of the recording wavelengths. The synthetic wavelengths ranged from {approx}3 mm for high measurement sensitivity to {approx}4 cm for wide measurement range. An rms error of {approx}35 {mu}m for a {approx}1 cm height measurement is shown. The measured profile of holographic interferometry agrees with a standard stylus instrument.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly accurate Michelson type wavelength meter that uses a rubidium stabilized 1560 nm diode laser as a wavelength reference

We investigated the accuracy limitation of a wavelength meter installed in a vacuum chamber to enable us to develop a highly accurate meter based on a Michelson interferometer in 1550 nm optical communication bands. We found that an error of parts per million order could not be avoided using famous wavelength compensation equations. Chromatic dispersion of the refractive index in air can almost be disregarded when a 1560 nm wavelength produced by a rubidium (Rb) stabilized distributed feedback (DFB) diode laser is used as a reference wavelength. We describe a novel dual-wavelength self-calibration scheme that maintains high accuracy of the wavelength meter. The method uses the fundamental and second-harmonic wavelengths of an Rb-stabilized DFB diode laser. Consequently, a highly accurate Michelson type wavelength meter with an absolute accuracy of 5x10{sup -8} (10 MHz, 0.08 pm) over a wide wavelength range including optical communication bands was achieved without the need for a vacuum chamber.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent Beam Combining of High Power Broad-Area Laser Diode Array with a Closed-V-shape External Talbot Cavity

We have coherently combined a high-power broad-area laser diode array by using a feedback loop closed off-axis external Talbot cavity. The off-axis feedback from two gratings provides transverse-mode control of broad-area lasers. The Talbot configuration of the external cavity implements diffractive coupling among laser diodes. Feedback from two gratings increases external cavity quality factor and spectrum selection capability. As a result, spatial coherence was improved and spectral linewidth was narrowed down. The high visibility of the far-field profile indicates that high spatial coherence was achieved. We also observed symmetric far-field profiles indicating that laser array was phase locked to in-phase and out-of-phase super-modes, respectively. Transition between these super-modes was observed by tuning one grating's tilted angle.

42 ENGINEERING↗

Integrated digital metamaterials enables ultra-compact optical diodes

We applied nonlinear optimization to design integrated digital metamaterials in silicon for unidirectional energy flow. Two devices, one for each polarization state, were designed, fabricated, and characterized. Both devices offer comparable or higher transmission efficiencies and extinction ratios, are easier to fabricate, exhibit larger bandwidths and are more tolerant to fabrication errors, when compared to alternatives. Furthermore, each device footprint is only 3μm × 3μm, which is the smallest optical diode ever reported. To illustrate the versatility of digital metamaterials, we also designed a polarization-independent optical diode.

36 MATERIALS SCIENCE↗

Diode laser pumps for future inertial fusion energy systems: status and perspectives

Diode laser pumps are a critical enabling technology for inertial fusion energy (IFE), and will remain the largest contributor to facility cost, even assuming tenfold cost-reduction at high volumes. An overview of diode requirements for IFE and a technology path to achieve them are presented.

Engineering - Electronic and electrical engineerin↗

Stacked-mosaic amplifier and diode delivery concept for kJ-class inertial fusion energy laser driver

We report on a laser amplifier architecture designed as a modular element for scaling to multi-megajoule laser facilities intended for inertial fusion energy (IFE) power plants. This kilojoule-class module features a stacked mosaic of gain media integrated with a diode delivery system for efficient optical pumping of the mosaic-structured gain medium, enabling high-repetition-rate operation at high wall plug efficiencies, necessary for an IFE driver. Details of a diode delivery system capable of pumping the mosaic architecture are presented. Comprehensive numerical modeling demonstrates that the stacked-mosaic approach reduces transverse gain by five orders of magnitude compared to a conventional full-aperture Yb:YAG based amplifier, substantially suppressing transverse amplified spontaneous emission (TASE) and enabling enhanced longitudinal energy extraction. Detailed analysis of thermal management and wavefront distortion in a 4 × 4 mosaic array indicates that temperature gradients and thermally induced aberrations are effectively controlled using gas cooling and commercially available phase-plate and deformable mirror technologies. We further discuss the applicability of a stacked-mosaic architecture to direct-drive IFE schemes, where broad spectral bandwidth is critical, and its compatibility with frequency conversion modules for up-conversion to blue wavelengths. Finally, an example point design for a 10 kJ, 10 Hz Yb:YAG module operating at 175 K with wall-plug efficiency exceeding 10 % is presented, underscoring the feasibility of this approach for next-generation high-energy lasers for IFE drivers. The results establish the stacked-mosaic amplifier as a scalable, robust platform not only for IFE but also for a broad range of advanced scientific and industrial laser applications.

Lasers↗

Demonstration of a compact, multi-joule, diode-pumped Tm:YLF laser

We report the demonstration of a diode-pumped Tm:YLF laser operating at 1.88 µm that produces pulse energies up to 3.88 J in 20 ns. The compact system consists of a Q-switched cavity-dumped oscillator generating 18 mJ pulses, which are then amplified in a 4-pass power amplifier. Energies up to 38.1 J were obtained with long-pulse amplifier operation. These results illustrate the high energy storage and extraction capabilities of diode-pumped Tm:YLF, opening the path to high peak and average power mid-infrared solid-state lasers

47 OTHER INSTRUMENTATION↗

Science-based Solutions to Achieve High-performance Deep-UV Laser Diodes (Final LDRD Report)

We present the results of a three year LDRD project that has focused on overcoming major materials roadblocks to achieving AlGaN-based deep-UV laser diodes. We describe our growth approach to achieving AlGaN templates with greater than ten times reduction of threading dislocations which resulted in greater than seven times enhancement of AlGaN quantum well photoluminescence and 15 times increase in electroluminescence from LED test structures. We describe the application of deep-level optical spectroscopy to AlGaN epilayers to quantify deep level energies and densities and further correlate defect properties with AlGaN luminescence efficiency. We further review our development of p-type short period superlattice structures as an approach to mitigate the high acceptor activation energies in AlGaN alloys. Finally, we describe our laser diode fabrication process, highlighting the development of highly vertical and smooth etched laser facets, as well as characterization of resulting laser heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A new time-dependent analytic model for radiation-induced photocurrent in finite 1D epitaxial diodes

Photocurrent generated by ionizing radiation represents a threat to microelectronics in radiation environments. Circuit simulation tools such as SPICE can be used to analyze these threats, and typically rely on compact models for individual electrical components such as transistors and diodes. Compact models consist of a handful of differential and/or algebraic equations, and are derived by making simplifying assumptions to any of the many semiconductor transport equations. Historically, many photocurrent compact models have suffered from accuracy issues due to the use of qualitative approximation, rather than mathematically correct solutions to the ambipolar diffusion equation. A practical consequence of this inaccuracy is that a given model calibration is trustworthy over only a narrow range of operating conditions. This report describes work to produce improved compact models for photocurrent. Specifically, an analytic model is developed for epitaxial diode structures that have a highly doped subcollector. The analytic model is compared with both numerical TCAD calculations, as well as the compact model described in reference. The new analytic model compares well against TCAD over a wide range of operating conditions, and is shown to be superior to the compact model from reference.

99 GENERAL AND MISCELLANEOUS↗

History of HERMES III Diode to Z-Pinch Breakthrough and Beyond (learning about Pulsed Power and Z-Pinch ICF)

HERMES III and Z are two flagship accelerators of Sandia s pulsed-power program developed to generate intense ɤ-ray fields for the study of nuclear radiation effects, and to explore high energy-density physics (including the production of intense x-ray fields for Inertia Confinement Fusion [ICF]), respectively. A diode at the exit of HERMES III converts its 20-MeV electron beam into ɤ-rays. In contrast, at the center of Z, a z-pinch is used to convert its 20-MA current into an intense burst of x-rays. Here the history of how the HERMES III diode emerged from theoretical considerations to actual hardware is discussed. Next, the reverse process of how the experimental discovery of wire-array stabilization in a z-pinch, led to a better theory of wire-array implosions and its application to one of the ICF concepts on Z--the DH (Dynamic Hohlraum) is reviewed. Lastly, the report concludes with how the unexpected axial radiation asymmetry measured in the DH is understood. The first discussion illustrates the evolution of physics from theory-to-observation-to-refinement. The second two illustrate the reverse process of observation-to-theory-to-refinement. The histories are discussed through the vehicle of my research at Sandia, illustrating the unique environment Sandia provides for personal growth and development into a scientific leader.

Sanford, Thomas William Lou↗

Parameter Estimation for Single Diode Models of Photovoltaic Modules

Many popular models for photovoltaic system performance employ a single diode model to compute the I - V curve for a module or string of modules at given irradiance and temperature conditions. A single diode model requires a number of parameters to be estimated from measured I - V curves. Many available parameter estimation methods use only short circuit, o pen circuit and maximum power points for a single I - V curve at standard test conditions together with temperature coefficients determined separately for individual cells. In contrast, module testing frequently records I - V curves over a wide range of irradi ance and temperature conditions which, when available , should also be used to parameterize the performance model. We present a parameter estimation method that makes use of a fu ll range of available I - V curves. We verify the accuracy of the method by recov ering known parameter values from simulated I - V curves . We validate the method by estimating model parameters for a module using outdoor test data and predicting the outdoor performance of the module.

14 SOLAR ENERGY↗

Diode Pumped Alkaline Laser System: A High Powered, Low SWaP Directed Energy Option for Ballistic Missile Defense High-Level Summary - April 2017

The Diode-Pumped Alkali Laser (DPAL) system is an R&D effort funded by the Missile Defense Agency (MDA) underway at Lawrence Livermore National Laboratory (LLNL). MDA has described the characteristics needed for a Boost Phase directed energy (DE) weapon to work against ICBM-class threat missiles. In terms of the platform, the mission will require a high altitude Unmanned Aerial Vehicle (UAV) that can fly in the “quiet” stratosphere and display long endurance – i.e., days on station. In terms of the laser, MDA needs a high power, low size and weight laser that could be carried by such a platform and deliver lethal energy to an ICBM-class threat missile from hundreds of kilometers away. While both the military and industry are pursuing Directed Energy for tactical applications, MDA’s objectives pose a significantly greater challenge than other current efforts in terms of the power needed from the laser, the low size and weight required, and the range, speed, and size of the threat missiles. To that end, MDA is funding two R&D efforts to assess the feasibility of a high power (MWclass) and low SWaP (size, weight and power) laser: a fiber combining laser (FCL) project at MIT’s Lincoln Laboratory, and LLNL’s Diode-Pumped Alkali Laser (DPAL) system.

42 ENGINEERING↗

Cathode Modeling and Diode Performance in a Planar Geometry using Space-charge-limited Emission

Space-charge-limited (SCL) emission parameters are varied to study the performance effects in a planar diode using an electromagnetic particle-in-cell simulation software suite, EMPIRE. Oscillations in the simulations are found and linked to the emission parameters, namely the breakdown threshold, the emission delay time, and the current density ramp time. The oscillations are suggested to be a transverse oscillator due to the perfect magnetic conductor boundary condition in steady-state operation and the formation of a virtual cathode in the diode driven by the SCL boundary condition.

97 MATHEMATICS AND COMPUTING↗

Analysis of stimulated Raman scattering using diode data at the Pecos experimental platform

In order to increase neutron yield in fusion experiments on the Magnetized Linear Inertial Fusion (MagLIF) platform, it is important to maximize the energy coupled to the fuel during the laser-preheat stage. However, laser-energy coupling is limited by laser—plasma instabilities (LPI). In this regard, the Pecos facility at Sandia National Laboratories uses the Z-beamlet laser to test and study the effects of LPI on MagLIF-relevant targets. In particular, stimulated Raman scattering (SRS) is measured in Pecos by using two photo-diodes and a near-beam imager. The measurements from the photo-diodes are processed using a synthetic spectrum based on a Gaussian model. With this relatively simple model, the mean wavelength and intensity of backscattered light can be deduced. Our measurements show similar trends as those given by time-resolved spectrometer data. Hence, this model provides a simple way to approximate time-resolved spectra for scattered light by SRS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of the self magnetic pinch diode at high voltages for flash radiography.

The Sandia Laboratories Advanced Radiographic Technologies Department, in collaboration with the United Kingdom Atomic Weapons Establishment, has been conducting research into the development of the Self-Magnetic-Pinched diode as an x-ray source suitable for flash radiographic experiments. We have demonstrated that this source is capable of meeting and exceeding the initial requirements of 250 rads (measured at one meter) with a 2.75 mm source spot-size. Recent experiments conducted on the RITS-6 accelerator have demonstrated the ability of this diode to meet intermediate requirements with a sub 3 mm source spot size and a dose in excess of 400 rads at one meter.

43 PARTICLE ACCELERATORS↗

An Optimized H5 Hysteresis Current Control with Clamped Diodes in Transformer-Less Grid-PV Inverter

With the rise of renewable energy penetration in the grid, photovoltaic (PV) panels are connected to the grid via inverters to supply solar energy. Transformer-less grid-tied PV inverters are gaining popularity because of their improved efficiency, reduced size, and lower costs. However, they can induce a path for leakage currents between the PV and the grid due to the absence of galvanic isolation. This leads to serious electromagnetic interference, loss in efficiency, and safety concerns. The leakage current is primarily influenced by the nature of the common mode voltage (CMV), which is determined by the switching techniques of the inverter. In this paper, a novel inverter topology of Hysteresis Controlled H5 with Two Clamping Diodes (HCH5-D2) is derived. The HCH5-D2 topology helps decouple the AC part (Grid) and DC part (PV) during the freewheeling period to make the CMV constant, thereby reducing the leakage current. Additionally, the extra diodes help reduce voltage spikes generated during the freewheeling period and maintain the CMV at a constant value. Finally, a 2.2 kW grid-connected single-phase HCH5-D2 PV inverter system’s MATLAB simulation is presented, showing better results compared to a traditional H4 inverter.

42 ENGINEERING↗