Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Bio-template route for facile fabrication of Cd(OH){sub 2}@yeast hybrid microspheres and their subsequent conversion to mesoporous CdO hollow microspheres

Cadmium oxide (CdO) microspheres with a porous hollow microstructure were prepared by a facile yeast mediated bio-template route. The yeast provides a solid scaffold for the deposition of cadmium hydroxide (Cd(OH){sub 2}) from cadmium acetate and sodium hydroxide solutions to form the hybrid Cd(OH){sub 2}@yeast precursor. Thermal conversions of this at above 500 {sup o}C in air have produced hollow CdO microspheres. The products were characterized by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), thermal gravimetric and differential thermal analysis (TGA-DTA), and Brunauer-Emmett-Teller (BET) surface analysis respectively. The obtained CdO microspheres have uniform size (length = 2.6 {+-} 0.4 {mu}m; width = 2.0 {+-} 0.2 {mu}m) and a well defined, continuous, mesoporous hollow microstructure. The shell is about 250-280 nm in thickness. The mechanism of formation of Cd(OH){sub 2}@yeast precursor and its conversion to CdO hollow microspheres is discussed. In comparison with traditional template-directed method, the present strategy represents a general, economical and environmentally benign route for the formation of metal oxide hollow microspheres. These materials have potential applications in different fields such as encapsulation, drug delivery, efficient catalysis, battery materials and photonic crystals. The method presented can be extended to the synthesis of other inorganic hollow microstructures of different sizes and shapes by pre-selecting suitable bio-templates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-assisted polyol synthesis and characterization of pvp-capped cds nanoparticles for the photocatalytic degradation of tartrazine

Highlights: • PVP-stabilized CdS nanoparticles have been fabricated by a polyol-microwave method. • CdS nanoparticles were characterized and the size was approximately 48 ± 10 nm. • Catalytic activity of our nanoparticles was examined for tartrazine degradation. • Remarkable results were obtained under both UV and visible light irradiations. - Abstract: Polyvinylpyrrolidone capped cadmium sulfide nanoparticles have been successfully synthesized by a facile polyol method with ethylene glycol. Microwave irradiation and calcination were used to control the size and shape of nanoparticles. Characterization with scanning electron microscopy revealed a restricted nanoparticles growth comparing with the uncapped product, hexagonal phase and 48 nm average particle size were confirmed by X-ray diffraction, and finally mechanism of passivation was suggested depending on Fourier transform infrared spectra. The efficiency of nanoparticles was evaluated by the photocatalytic degradation of tartrazine in aqueous solution under UVC and visible light irradiation. Complete degradation of the dye was observed after 90 min of UVC irradiation under optimized conditions. Kinetic of reaction fitted well to the pseudo-first-order kinetic and Langmuir–Hinshelwood models. Furthermore, 85% degradation of the dye in 9 h under visible light suggests that cadmium sulfide is a promising tool to work under visible light for environmental remediation.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of nanocrystalline Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) synthesized by a mechanochemical route

Highlights: • A mechanochemical reaction produces Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl in ambient conditions. • Heating at 600 °C and ulterior washing yields ferrite phase for all the compositions. • The synthesized powders consist of agglomerates of Bi{sub 1-x}La{sub x}FeO{sub 3} nanoparticles. • La-content influences the crystal structure and Néel temperature of the materials. • The presence of two canting levels of antiparallel spins causes a complex magnetism. - Abstract: Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) powders were prepared by means of a solid acid-base reaction induced by mechanochemical energy. Bi, La and Fe chlorides were high-energy ball-milled with NaOH, yielding a mixture of Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl. After heating and washing, nanoparticles of Bi{sub 1-x}La{sub x}FeO{sub 3} were obtained as a main product, with low contents of secondary phases. Structural characterization was performed by X-ray diffraction (Rietveld refinement) and Raman spectroscopy. The hyperfine magnetic behavior was analyzed by means of Mössbauer spectroscopy and the microstructure of the particles was evaluated by transmission electron microscopy. Differential scanning calorimetry was employed to investigate the thermal behavior of the samples and magnetic measurements at room temperature were also carried out. Crystal structure transitions as a function of composition were identified. Moreover, an intricate magnetic behavior was observed, which was explained on the basis of the concomitant contribution of two different canting levels of the antiparallel spins.

36 MATERIALS SCIENCE↗

Device fabrication, characterization, and thermal neutron detection response of LiZnP and LiZnAs semiconductor devices

Nowotny-Juza compounds continue to be explored as candidates for solid-state neutron detectors. Such a device would have greater efficiency, in a compact form, than present day gas-filled 3 He and 10 BF 3 detectors. The 6 Li(n,t) 4 He reaction yields a total Q-value of 4.78 MeV, larger than 10 B, an energy easily identified above background radiations. Hence, devices fabricated from semiconductor compounds having either natural Li (nominally 7.5% 6 Li) or enriched 6 Li (usually 95% 6 Li) as constituent atoms may provide a material for compact high efficiency neutron detectors. Starting material was synthesized by preparing equimolar portions of Li, Zn, and As sealed under vacuum (10 -6 Torr) in quartz ampoules lined with boron nitride and subsequently reacted in a compounding furnace [1]. The raw synthesized material indicated the presence high impurity levels (material and electrical property characterizations). A static vacuum sublimation in quartz was performed to help purify the synthesized material [2], [3]. Bulk crystalline samples were grown from the purified material [4], [5]. Samples were cut using a diamond wire saw, and processed into devices. Bulk resistivity was determined from I–V curve measurements, ranging from 10 6 –10 11 Ω cm. Devices were characterized for sensitivity to 5.48 MeV alpha particles, 337 nm laser light, and neutron sensitivity in a thermal neutron diffracted beam at the Kansas State University TRIGA Mark II nuclear reactor. Thermal neutron reaction product charge induction was measured with a LiZnP device, and the reaction product spectral response was observed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast myosin binding protein C knockout in skeletal muscle alters length-dependent activation and myofilament structure

In striated muscle, the sarcomeric protein myosin-binding protein-C (MyBP-C) is bound to the myosin thick filament and is predicted to stabilize myosin heads in a docked position against the thick filament, which limits crossbridge formation. Here, we use the homozygous Mybpc2 knockout (C2 -/- ) mouse line to remove the fast-isoform MyBP-C from fast skeletal muscle and then conduct mechanical functional studies in parallel with small-angle X-ray diffraction to evaluate the myofilament structure. We report that C2 -/- fibers present deficits in force production and calcium sensitivity. Structurally, passive C2 -/- fibers present altered sarcomere length-independent and -dependent regulation of myosin head conformations, with a shift of myosin heads towards actin. At shorter sarcomere lengths, the thin filament is axially extended in C2 -/- , which we hypothesize is due to increased numbers of low-level crossbridges. These findings provide testable mechanisms to explain the etiology of debilitating diseases associated with MyBP-C.

59 BASIC BIOLOGICAL SCIENCES↗

Metal (hydr)oxide surface precipitates and their effects on potassium sorption

Surface precipitation has been shown to occur on rapid time scales in clay and metal oxide mineral systems. The formation of surface precipitates is hypothesized to present new potential sorption sites for potassium (K), where K can become incorporated into newly formed interlayer spaces (e.g., between tetrahedral–octahedral–tetrahedral stacked sheets). The objective of this study is to determine the effects of newly formed mineral surface precipitates on K sorption. Potassium adsorption experiments were conducted by utilizing Al 2 O 3 and SiO 2 sorbents in the presence of various cations (magnesium, zinc, and nickel) that helped to catalyze the formation of surface precipitates. Dissolved concentrations of elements were monitored via inductively coupled plasma optical emission spectrometry (ICP-OES). Solids were characterized via X-ray diffraction (XRD), and K surface complexation was analyzed via X-ray absorption near edge structure (XANES) spectroscopy. X-ray diffraction analysis indicated bayerite, layered double hydroxides (LDH), and silicated LDH were formed as reaction products, thus creating new surface sites for potential K adsorption. The presence of Si increased K adsorption perhaps due to its role in the formation of LDH surface precipitates. When the differences between observed and theoretical surface area normalized K sorption densities were averaged, a 31% increase in K adsorption was observed in the presence of Si. XANES analysis indicated that the binding mechanism of K to Si is different than that of K to Al, perhaps due to the presence of inner-sphere complexation of K to Al-oxide. Samples reacted for one month versus one week yielded more intense XANES post-edge peaks which indicated that the K sorption complex changes over time. Altogether, our findings provide novel insights into the mechanisms of K fixation in soil and has high implication in providing improved K fertilizer recommendation to growers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of uranium disulfide from a uranium thioamidate single-source precursor

A single-source-precursor approach was developed to synthesize uranium-based materials outside of the typically-studied oxides. This approach allows for shorter reaction times, milder reaction conditions, and control over the chemicals present in synthesis. To this end, the first homoleptic uranium thioamidate complex was synthesized as a precursor for US 2 materials. Pyrolysis of the thioamidate results in decomposition via an alkene elimination pathway and formation of γ-US 2 , which has historically been hard to access without the need for a secondary sulfur source. Despite the oxophilicity of uranium, the method successfully forms US 2 without the inclusion of oxygen in the bulk final product. These findings are supported by simultaneous thermal analysis, elemental analysis, powder X-ray diffraction, and uranium L 3 -edge X-ray absorption fine-structure spectroscopy. This work represents the first example of a single-source precursor approach to target and synthesize actinide materials other than the oxides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Study of the Thermal Behavior of Syndiotactic and Atactic Polystyrene By Raman Spectroscopy

The glass properties and semi crystalline properties of polymers are observable by X-ray diffraction. Some previous works 1, 2, 3 were about determination of degree of crystallinity of sPS by various technologies, like for example DSC, XRD and Raman spectroscopy. The purpose of this paper is to show importance of Raman spectroscopy as analytical tool for the study of amorphous and semi-crystalline phase. The polymers on which our research is achieved, is amorphous polystyrene, shortened aPS, and semi crystalline polystyrene, sPS.

36 MATERIALS SCIENCE↗

Thermal plasma processed ferro-magnetically ordered face-centered cubic iron at room temperature

Here, we report tailor made phase of iron nanoparticles using homogeneous gas phase condensation process via thermal plasma route. It was observed that crystal lattice of nano-crystalline iron changes as a function of operating parameters of the plasma reactor. In the present investigation iron nanoparticles have been synthesized in presence of argon at operating pressures of 125–1000 Torr and fixed plasma input DC power of 6 kW. It was possible to obtain pure fcc, pure bcc as well as the mixed phases for iron nanoparticles in powder form as a function of operating pressure. The as synthesized product was characterized for understanding the structural and magnetic properties by using X-ray diffraction, vibrating sample magnetometer, and Mössbauer spectroscopy. The data reveal that fcc phase is ferromagnetically ordered with high spin state, which is unusual whereas bcc phase is found to be ferromagnetic as usual. Finally, the structural and magnetic properties are co-related.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Tubing from Advanced ODS alloy (FCRD-NFA1)

Fabrication methods are being developed and tested for producing fuel clad tubing of the advanced ODS 14YWT and FCRD-NFA1 ferritic alloys. Three fabrication methods were based on plastically deforming a machined thick-wall tube sample of the ODS alloys by pilgering, hydrostatic extrusion or drawing to decrease the outer diameter and wall thickness and increase the length of the final tube. The fourth fabrication method consisted of the additive manufacturing approach involving solid-state spray deposition (SSSD) of ball milled and annealed powder of 14YWT for producing thin-wall tubes. Of the four fabrication methods, two methods were successful at producing tubing for further characterization: production of tubing by high-velocity oxy-fuel spray forming and production of tubing using high-temperature hydrostatic extrusion. The characterization described shows through neutron diffraction the texture produced during extrusion while maintaining the beneficial oxide dispersion. In this research, the parameters for innovative thermal spray deposition and hot extrusion processing methods have been developed to produce the final nanostructured ferritic alloy (NFA) tubes having approximately 0.5 mm wall thickness. Effect of different processing routes on texture and grain boundary characteristics has been investigated. It was found that hydrostatic extrusion results in combination of plane strain and shear deformations which generate rolling textures of α- and γ-fibers on {001}<110> and {111}<110> together with a shear texture of ζ-fiber on {011}<211> and {011}<011>. On the other hand, multi-step plane strain deformation in cross directions leads to a strong rolling textures of θ- and ε-fiber on {001}<110> together with weak γ-fiber on {111}<112>. Even though the amount of the equivalent strain is similar, shear deformation leads to much lower texture indexes compared to the plane strain deformations. Moreover, while 50% of hot rolling brings about a large number of high-angle grain boundaries (HAB), 44% of shear deformation results in large amount of low-angle boundaries (LAB) showing the incomplete recrystallization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Laser velocimetry measurements in a gas turbine research combustor

The effects of turbulence on the production of pollutant species in a gas-turbine research combustor are studied using laser diffraction velocimetry (LDV) techniques. Measurements that were made in the primary combustion zone include mean velocity, rms velocity fluctuations, velocity probability distributions, and autocorrelation functions. A unique combustor design provides relatively uniform flow conditions and independent control of drop size, equivalence ratio, inlet temperature, and combustor pressure. Parameters which characterize the nature of the spray combustion (i.e., whether single droplet or group combustion occurs), were determined from the LDV data. Turbulent diffusivity (eddy viscosity) reaches a value of 2930 sq cm/sec, corresponding to a convective integral length scale of 1.8 cm. The group combustion number, based on turbulent diffusivity, is measured to be 6.2

Driscoll, J. F.↗

Residual Stress Mapping of As-Built and Hot Isostatic Pressure Treated GRCop-84 as Fabricated by Selective Laser Melting

GRCop-84, a copper alloy developed by NASA Glenn Research Center (GRC) with the starting At% (atomic percent) Cu-8 Cr-4 Nb, has a copper matrix with a fine intermetallic dispersion of Cr2Nb (cubic Laves phase C15). The alloy is being developed for high-heat-flux applications and has excellent high temperature properties including retention of tensile strength at high temperatures, high thermal conductivity, and excellent creep resistance. GRCop-84 has shown higher survivability rates than other metal additive alloys, good surface finish, and requires less operator tweaking for builds, and this is not fully understood. Neutron diffraction provides an accurate, non-destructive method of measuring the thermal stresses accumulated during production; the primary source of failure before annealing. The unstressed lattice spacing (d (sub 0)), residual stress, and distribution have been characterized for simple shapes in HIP (Hot Isostatic Pressing,) and as-built conditions made with SLM (Selective Laser Melting), a powder bed fusion method, with the HIP samples showing significantly reduced stresses concentrations than the as-built.

Minnecci, Robert↗

Synthesizing intermetallic thermoelectric materials using metal flux growth method

With zero energy poverty by 2050 goals, exploring innovative energy technologies is essential. Thermoelectric materials (TEMs) have the potential to harness waste heat and convert it to electricity (e.g., for spacecraft power, sensors, and cryogenic cooling). Two limitations of thermoelectric compounds are their low efficiency and limited pool of materials. Optimizing the efficiency of TEMs is challenging due to the interdependent relationship between electrical and thermal conductivity. A deeper understanding of electronic properties and lattice thermal conductivity is necessary to “understand, predict and ultimately control” the thermoelectric properties of TEMs. Understanding the influence of light-atom-doping and intrinsic defects on the electronic properties of the f-element containing TEMs are important questions that need to be answered to design and synthesize TEMs with optimal parameters. The purpose of this work is to understand how doping f-element based TEMs with light elements, such as carbon and boron, would impact the crystal structure, bond lengths, band gaps, and thermoelectric characteristics. High-quality f¬-element containing intermetallic single crystals are grown in metal flux media. In molten metal flux growth method, one or more low-melting metals such as aluminum, gallium, tin, and bismuth are used in excess as the reaction medium. As these are solution-state reactions, we can use lower temperatures than solid-state reactions and isolate the kinetic products instead of the thermodynamically stable compound. Then these are characterized using X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, magnetization, electrical and thermal conductivities, and thermoelectric power.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

Reliable hydrogen production from methanol photolysis in aqueous solution by a harmony between In and Zn in bimetallic zinc indium sulfide

Highlights: • Band-gaps in Zn{sub x}In{sub y}S{sub z} particles were shorten. • Hydrogen production by methanol photolysis was the best on ZnInS{sub 2.5}. • Recombination between electrons and holes during methanol photolysis became long on ZnInS{sub 2.5}. - Abstract: This study focuses on hydrogen production by methanol photolysis using zinc indium sulfide (Zn{sub x}In{sub y}S{sub z}). The X-ray diffraction identified that the synthesized Zn{sub 2}InS{sub 2.5} and ZnInS{sub 2.5} particles have a hexagonal Zn{sub 3}In{sub 2}S{sub 6} structure, but when In of twice amount against Zn is coexisted, the particle exhibits a perfect hexagonal ZnIn{sub 2}S{sub 4} structure. The results in ultra-violet absorption and X-ray photoelectron spectroscopy analysis confirmed that the band-gaps of Zn{sub x}In{sub y}S{sub z} particles decrease depend on the coexistence of In. However, the photocurrent which related to the life time of excited electrons was no correlation with the Zn/In molar ratio, and it was the highest on ZnInS{sub 2.5} particle with a ratio of Zn:In = 1:1. Eventually, the hydrogen production by methanol photolysis in aqueous solution was the best on ZnInS{sub 2.5} particle. This result gives ultimately relevant that the recombination between electrons and holes during methanol photolysis could be suppressed on bimetallic ZnInS{sub 2.5} particle.

36 MATERIALS SCIENCE↗

Synthesis Gas Conversion over Rh-Mn-W x C/SiO 2 Catalysts Prepared by Atomic Layer Deposition

The catalytic conversion of synthesis gas to value-added oxygenates and light hydrocarbons was studied here on Rh and Rh–Mn clusters on tungsten carbide-overcoated silica (W x C/SiO 2 ) at 523 K, 580 psi, and CO/H 2 = 1/1. The W x C-modified SiO 2 support was prepared by the overcoating of WO x on SiO 2 using atomic layer deposition (ALD) followed by carburization. The reactivities of Rh/W x C/SiO 2 catalysts with varying number of ALD cycles (number of cycles = 2, 5, 10, 20, and 30) were measured and showed that 5 ALD cycles of WxC suppressed the formation of methane. All W x C-modified catalysts showed enhancement in selectivity toward methanol and ethanol through CO hydrogenation and acetaldehyde hydrogenation, respectively. These catalysts also improved the overall turnover frequency (TOF). The addition of Mn species further promoted the activity and the selectivity toward ethanol and C 2+ hydrocarbons, especially light alkenes. The best performing Rh-2Mn/5cycle-W x C/SiO 2 catalyst (Rh:Mn molar ratio = 1:2) achieved 84.7% selectivity toward valuable oxygenates and C 2+ hydrocarbons with a ratio of alkenes to alkanes equal to 1.7, compared to Rh/SiO 2 which exhibited 80.4% selectivity toward the products aforementioned with a ratio of 0.5. The overall TOF was 20 times higher than that over Rh/SiO 2 (i.e., 5.6 × 10 –2 s –1 vs 2.9 × 10 –3 s –1 ). X-ray diffraction revealed that the existence of W 2 C, which was the dominant phase in Rh/5cycle-W x C/SiO 2 , favored the suppression of methane and enhanced the production of alcohols and C 2+ hydrocarbons compared to the WC support. Density functional theory calculations for Rh 19 , Rh 31 , and Rh 37 clusters on various WC surfaces suggested that the shape of Rh clusters is condition dependent and subject to H 2 pressure. The C- and O- binding energies on various sites for the clusters were used with scaling relations to probe their catalytic activity. With the use of this approach, the increase in the O binding energy when moving from the SiO 2 -supported Rh 37 cluster to the WC-supported cluster leads to an increase in the activity of Rh/W x C/SiO 2 at the expense of the reduction in the number of sites that are selective toward C 2 oxygenates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO{sub 2} Corrosion Behavior of Calcite-Covered API 5L X52 Carbon Steel in Aqueous Solutions

The CO{sub 2} corrosion of API 5L X52 steel in the presence and absence of calcite scale has been investigated. The scale was precipitated from a supersaturated solution at temperatures of 25 and 80 °C. The crystalline phase, cross section and surface morphologies of scale were studied by x-ray diffraction and scanning electron microscopy, respectively. It was found that the scale deposit mostly consisted of calcite. The corrosion behavior of bare and calcite-covered samples was investigated by electrochemical impedance spectroscopy and cyclic polarization techniques in aqueous CO{sub 2} solutions at 30, 50 and 70 °C. The presence of calcite scale on carbon steel surface decreased the adsorption of intermediate corrosion products as the scale uniformly covered the bare surface which resulted in reduction of general CO{sub 2} corrosion rate. The results of cyclic polarization tests revealed that the bare and calcite-covered samples were not susceptible to localized CO{sub 2} corrosion under conditions studied in this research.

36 MATERIALS SCIENCE↗

Effect of electrical field on TSA failure of cement-based materials

The impact of electrical field on the sulfate attack of cement-based materials at low temperatures was studied to rapidly detect Thaumasite Sulfate Attack (TSA) in the laboratory and in future engineering. Sulfate attack of cement paste with 30 wt% replacement of CaCO{sub 3} powder soaked in Na{sub 2}SO{sub 4} solution, MgSO{sub 4} solution, or CaSO{sub 4} solution was measured under the condition of 5 ± 2 °C when an electrical field was applied. Appearance changes and compressive strength of the samples were tested to evaluate the corrosion degree. Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopic measurements were applied to study the microstructure of the corrosion product. The test results indicate that sample damage was obvious, compression strength declined rapidly, and ettringite and/or thaumasite were found in the corrosion product after applying the electrical field for 90 days. A muddy product with TSA characteristics was formed, and thaumasite composition was found in the corrosion product after applying the electrical field for 120 days when MgSO{sub 4} solution was used as the corrosion medium. It is confirmed that an electrical field can accelerate TSA failure in cement-based materials.

36 MATERIALS SCIENCE↗

Quantitative Microstructural Characterization of Plutonium Oxalate Auto-Degradation and Evidence for PuO2 Nanocrystal Formation

It has been known since the 1950s that plutonium oxalate powders change color and lose mass over time when stored at room temperature in air. Despite several studies monitoring these changes, there are still discrepancies in the literature regarding the speciation of intermediate and final products that result from this decomposition. Presented here for the first time is a comprehensive series of time-resolved powder X-ray diffraction experiments coupled with solid-state optical spectroscopy and electron microscopy of aged plutonium (III) and (IV) oxalate powders. These data provide fresh insight into the chemical and structural changes that occur in these solids over time at room temperature and represent new evidence suggesting both plutonium (III) and plutonium (IV) oxalates decompose to form nanocrystalline plutonium oxide in the solid state.

Corbey, Jordan F.↗