Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Defect Characterization of Monocrystalline Silicon Solar Cells with Polysilicon Passivated Contact Using Electrically-Detected Magnetic Resonance (EDMR) Spectroscopy

As the c-Si based solar cell efficiencies are approaching over 26%, it is becoming critical to characterize the low concentrations of the defects – as low as 10^10-10^11 cm-3 (for e.g., iron contamination in high-lifetime Ga-doped wafers3 and n-type wafers), and further reduce them. Also, atomistic level understanding of the mechanisms of the low concentration process-induced-defects and reliability limiting defects (such as light and elevated temperature induced degradation, surface passivation degradation) is needed to design the mitigation strategies. The conventional characterization techniques are limited due to their detection limitations. Some of the techniques based on lifetime spectroscopies can still be used for low concentration characterization however, they are based on estimations and theoretical models and hence, indirect and cannot fully reveal information about the microscopic mechanism of the defects. Thus, we present the application of an ultrasensitive magnetic resonance-based technique for the direct spectroscopic detection of the defects in Si PV - electrically detected magnetic resonance (EDMR). In this work, we aim to focus on establishing a process flow for fabrication of minicells with (miniature replica of the larger-area cells) and setting up the routine for EDMR measurements on them with the EDMR instrumentation capability at NREL. For the EDMR measurements, sample size is limited by the dimensions of sample holder tube (width less than 3.2 mm, active area - 20 mm). Thus, we have designed c-Si based minicells with polysilicon (poly-Si) passivated contacts same as the larger-area cells that we fabricate in our group at NREL. We also modified our minicell process flow for fabricating the textured minicells for preserving the texture during processing and taking care of the laser-ablation edge damage which can significantly affect the performance of such small devices. We have achieved comparable performance on these newly fabricated minicells as that of our 4 cm2 devices with same structure (comparable VOC, JSC, FF). We also conducted EDMR measurements on the minicells and observed a distinct EDMR signal at g-value ~2.005 at temperatures 30K and above, as shown in Fig. 2. We associate this signal to the presence of silicon dangling bonds based on the g-value. We also observed an EDMR signal at g-value ~1.998 at temperature ~5K. The origin of this signal is still being investigated. Thus, we show the proof of concept of minicells and EDMR measurements with which we now aim to study some of the unknown defects in silicon solar cell devices.

EDMR↗

Investigation of Scintillator Based Partial Defect Detector for Safeguarding Spent Fuel Assemblies

Safeguarding spent fuel assemblies is one of the most important objectives for nuclear non-proliferation, since it contains fissile material which can be diverted into nuclear explosive devices. Partial defect detection is a challenging issue among IAEA future safeguards requirements. The IAEA defines there exist partial defects if 50% or more of the fuel pins in a spent fuel assembly are diverted. Conventional partial defect detectors are classified into two groups depending on its operating principle. The first group applies gamma/neutron spectrometer, which are PDET, SMOPY, and gamma emission tomography. Partial defect detectors in the first group are able to calculate the burnup, isotope composition, and cooling time of a spent fuel assembly. However, since it takes time to analyze a spent fuel assembly, they cannot detect every spent fuel assemblies in a cooling pool. The second group applies Cerenkov radiation detector, which can screen a spent fuel assembly within a short time. However, since Cerenkov radiation cannot be generated under atmospheric environment, it cannot be applied for dry condition. This research proposes a scintillator based partial defect detector (SPDD) for inspecting spent fuel, which can detect partial defects within a short time and both in and out of a cooling pool.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamic Motions of Topological Defects in Nematic Liquid Crystals under Spatial Confinement

Abstract Topological defects (TDs) have become a sensational topic due to their significant influence on the unusual optical and physiochemical characteristics of the material. To facilitate their application across a wide range of disciplines it is desirable to analyze and gain fundamental understanding of TDs in both equilibrium and nonequilibrium systems. Liquid crystals (LCs) are considered an ideal system for study given the direct visualization of TDs and a straightforward analyzation process. In addition to the equilibrium morphology of LC TDs, it is also of great interest to track and control the formation and annihilation of defects during thermodynamic processes. However, controlling the dynamic behavior of formed defects remains a challenge. Here, nematic LCs confined in a cell exhibiting surfaces with periodic anchoring conditions containing surface topography are relied on. The effects of patterned surface characteristics such as width, periodicity, and degree of curvature on defects dynamic motion, stabilization, and annihilation are explored. The computational experiments recapitulate the TDs transition path and provide free energy‐based predictions of critical distances for defect annihilation. Taken together, this simple approach offers a promising opportunity to control the dynamics of TDs in LCs through chemical patterned surfaces with topography.

36 MATERIALS SCIENCE↗

Be₂C as a neutron moderator for molten salt reactors: A first-principles study of structural, electronic, and defect properties

Beryllium carbide (Be 2 C), valued for its high neutron moderation efficiency and low absorption cross section, is a promising high-temperature neutron moderator for molten salt reactors. Its practical adoption, however, demands significant technological maturation, requiring comprehensive theoretical and experimental studies of its response to different conditions, including high temperature and irradiation. Here, we report initial results on the fundamental properties and radiation-induced defects of Be 2 C, focusing on antisites, vacancies, interstitial atoms, and Frenkel pairs in the Be and C sublattices. Using density functional theory (DFT) and ab initio molecular dynamics (AIMD), we calculate the defects formation and binding energies, evaluating their dependence on the supercell size, charge states, and chemical environment. In general, carbon defects exhibit higher formation energies, greater sensitivity to cell size, and stronger impacts on the density of states compared to beryllium defects, with charged state the effects being more pronounced. Static DFT reveals multiple metastable interstitial configurations, while AIMD identifies ground states as C-C <100> dumbbells and octahedral Be interstitials. In conclusion, the diversity of metastable configurations and defect states complicates the diffusion mechanisms, requiring further molecular dynamics analysis to elucidate the mechanisms and rates of radiation-induced atomic transport, as well as the structural stability of Be2C.

Ab initio modeling↗

Comprehensive defect evaluation of advanced nuclear fuels using high-resolution acoustic signals and optimized sensor separation

Graphite pebble composite structures based on TRistructural-ISOtropic (TRISO) particles are being developed as core nuclear fuels in advanced power reactors, promising safe operation at increased temperatures. Ensuring the structural integrity of these nuclear fuels requires comprehensive and accurate non-destructive evaluation (NDE) techniques to characterize defects and damage in the pebbles. However, traditional acoustic evaluation methods face limitations in defect characterization due to the highly attenuative, and geometrically and compositionally complex nature of these structures. This study proposes an improved acoustic NDE technique for accurate detection and classification of anticipated relevant defects and damage in graphite pebbles using high-resolution acoustic signals and optimized transmit-receive sensor networks. The proposed approach utilizes a triangular three-sensor network as the base unit, comprising three transmit-receive sensors. The sensor separation distance, as well as acoustic excitation center frequency, pulse-width, and bandwidth are optimized to enhance spatial resolution and improve signal-to-noise ratio, enabling effective characterization of the smallest size and widest range of defects in pebbles. Furthermore, the use of the triangular sensor configuration instead of a more conventional transmit-receive sensor pair expands the inspection region from a one-dimensional linear path to a two-dimensional area, increasing spatial coverage. To mitigate challenges associated with processing of complex acoustic signals arising from high-frequency, high-bandwidth excitation in these structures, a machine-learning-based signal processing algorithm is integrated with the sensor network. In the machine-learning-based algorithm, multi-domain features are extracted from the acoustic signals to capture intricate signal characteristics, significantly improving defect identification and classification compared to traditional approaches. The proposed acoustic NDE technique offers considerable promise for practical and reliable defect/damage diagnostics of advanced nuclear pebble fuels.

42 ENGINEERING↗

Detector performance and defect densities in CdZnTe after two-step annealing

Defects both micro-scale and nano-scale are plays an important role in CdZnTe(CZT) device performance. Typical micro-scale defect, Te inclusions, was removed by two-step annealing and its concentration were analyzed by IR transmission microscopy. In addition, transmission electron microscopy (TEM) measurement was employed to investigate the evolution of nano-scale defects after annealing process. Micro-twins and stacking faults were commonly observed defects in CZT as-grown and annealed CZT. The line shape defects which possibly related to the stress field around dislocations, were combine and disappear in in-situ the annealing at 200-220 °C. Frisch-grid CZT detector made of two-step annealed one exhibit better energy resolution and low backscattering counts in Cs-137 gamma spectra.

36 MATERIALS SCIENCE↗

Defect Chemistry and Hydrogen Transport in La/Sr-Based Oxyhydrides

Oxyhydrides in the series La 2 – y Sr y LiH 1 + y O 3 – y are attractive materials for solid-state hydride electrolytes. However, their chemical stability is poor, and thus far only La 2 LiHO 3 (y = 0) has been demonstrated in a working fuel cell. Using a first-principles approach to study defect chemistry and stability, we find that La 2 LiHO 3 can be stabilized over a range of H-rich, O-poor chemical conditions, while Sr 2 LiH 3 O has low stability. Here, defects are critical for ionic transport and for stability, particularly in Sr 2 LiH 3 O, in which anion antisites and H vacancies readily form. In fact, we show that the ground-state structure of Sr 2 LiH 3 O is inherently disordered. La 2 LiHO 3 has low conductivity, which we connect to the high formation energy of defects such as VO and OH that are necessary for hydride conduction. When Sr 2 LiH 3 O is grown under carefully selected conditions, V H + defects can be made prevalent; these defects give rise to much higher ionic conductivity than can be obtained in La 2 LiHO 3 . In general, we show that the choice of synthesis conditions is vital when seeking to optimize the stability and ionic conductivity of these oxyhydrides, thereby tailoring them for use in solid-state hydrogen fuel cells.

08 HYDROGEN↗

Metal Halide Perovskites Demonstrate Radiation Hardness and Defect Healing in Vacuum

Herein, we subject formamidinium lead iodide films to oxygen-containing gases (flowing O 2 or free diffusion of lab atmosphere), inert gases (flowing He, Ar, or N 2 ), and vacuum. Our films are irradiated by Cu Ka X-rays and held at 75 °C while X-ray diffraction is recorded. Under all gas conditions, we observe a reproducible 1.1 ± 0.5 A 3 perovskite lattice contraction from an initial unit cell volume of 256.5 ± 0.8 A 3 concurrent with continuous perovskite loss and lead iodide growth. Oxygen-containing gases increase the reaction rates without materially altering perovskite structural changes. Under the same temperature and irradiation conditions in vacuo, a self-healing reaction is observed, exhibited by a reproducible (0.9 ± 0.3 A 3 ) lattice expansion and stabilization of the perovskite. Furthermore, interactions between the perovskite, defects, and minority phases are simulated by generalized gradient approximation Perdew-Burke-Ernzerhof (GGA-PBE) density functional theory. Lattice contraction indicates an increase in the concentration of Schottky defects-pairs of formamidinium and iodine vacancies. Under irradiation in every atmospheric condition, a solid solution of Schottky defects with a concentration of several percent diffuses and precipitates forming lead iodide and consuming the defects. In the presence of ionized gases, this framework is modified to include the continual loss of formamidinium and iodine ions from the perovskite forming Schottky defects.

14 SOLAR ENERGY↗

Formation and conversion of defect centers in low water peak single mode optical fiber induced by gamma rays irradiation

The formation and conversion processes of defect centers in low water peak single mode optical (LWPSM) fiber irradiated with gamma rays were investigated at room temperature using electron spin resonance. Germanium electron center (GEC) and self-trapped hole center (STH) occur when the fibers are irradiated with 1 and 5 kGy cumulative doses, respectively. With the increase in irradiation doses, the GEC defect centers disappear, and new defect centers such as E{sup '} centers (Si and Ge) and nonbridge oxygen hole centers (NBOHCs) generate. The generation of GEC and STH is attributed to the electron transfer, which is completely balanced. This is the main reason that radiation-induced attenuation (RIA) of the LWPSM fiber is only 10 dB/km at communication window. The new defect centers come from the conversion of GEC and STH to E{sup '} centers and NBOHC, and the conversion processes cause bond cleavage, which is the root cause that the RIA of the LWPSM fiber significantly increases up to 180 dB/km at working window. Furthermore, the concentration of new defect centers is saturated easily even by increasing cumulative doses.

36 MATERIALS SCIENCE↗

Effect of germanium doping on the annealing characteristics of oxygen and carbon-related defects in Czochralski silicon

This paper is devoted to the annealing studies of defects produced in carbon-rich Ge-doped Czochralski-grown Si (Cz-Si) by 2 MeV electron irradiation. The annealing temperature of vacancy-oxygen (VO) complexes, carbon interstitial-oxygen interstitial (C{sub i}O{sub i}), and carbon interstitial-carbon substitutional (C{sub i}C{sub s}) pairs as well as the formation temperature of vacancy-two oxygen (VO{sub 2}) complexes are monitored as a function of Ge concentration. It has been established that the annealing of C{sub i}O{sub i} and C{sub i}C{sub s} defects remains practically unaffected by the Ge presence, whereas the annealing temperature of VO defects and the formation temperature of VO{sub 2} complexes are substantially lowered at Ge concentrations larger than 1x10{sup 19} cm{sup -3}. The hydrostatic component of elastic strains introduced by Ge atoms in the Si crystal lattice was calculated. It appears to be very small, at least insufficient to exert a pronounced effect upon the annealing behavior of radiation-produced defects. This conclusion is in line with what is observed for the C{sub i}O{sub i} and C{sub i}C{sub s} species. In the case of VO, whose annealing process in Cz-Si is concurrently conducted by two reaction paths VO+O{sub i}{yields}VO{sub 2} and VO+Si{sub I}{yields}O{sub i}, we suggest that the latter reaction in Ge-doped Cz-Si is enhanced by emitting self-interstitials (Si{sub I}) from loosely bound self-interstitial clusters predominantly formed around Ge impurity atoms. As a result, the liberation of self-interstitials at lower annealing temperatures leads to an enhanced annealing of VO defects. An enhanced formation of VO{sub 2} complexes at lower temperatures is also discussed in terms of other reactions running in parallel with the reaction VO+Si{sub I}{yields}O{sub i}.

36 MATERIALS SCIENCE↗

Direct observation of N-(group V) bonding defects in dilute nitride semiconductors using hard x-ray photoelectron spectroscopy

Using bulk sensitive hard x-ray photoelectron spectroscopy, we directly observe a spectrum related to N-As bonding defects in (Ga,In)(N,As)/Ga(N,As) heterostructure. The defects are most likely attributed to split interstitials. Their concentration is in the order of 10{sup 19} cm{sup -3}, close to the detection limit of the measurement. Rapid thermal annealing eliminates the defects, leading to those undetectable. Similar phenomenon is observed for N-P bonding defects in In(N,P). The results indicate common features in dilute nitride semiconductor system: existence of N-(group V) bonding defects and their behavior on postgrowth annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum correlation of path-entangled two-photon states in waveguide arrays with defects

We study the quantum correlation of path-entangled states of two photons in coupled one-dimensional waveguide arrays with lattice defects. Both off-diagonal and diagonal defects are considered, which show different effects on the quantum correlation of path-entangled two-photon states. Two-photon bunching or anti-bunching effects can be observed and controlled. The two photons are found to have a tendency to bunch at the side lobes with a repulsive off-diagonal defect, and the path-entanglement of the input two-photon state can be preserved during the propagation. We also found that defect modes may play an important role on the two-photon correlation of path-entangled states in the waveguide arrays. Due to the quantum interference effect, intriguing evolution dynamics of the two-photon correlation matrix elements with oscillation frequencies being either twice of or the same as that of a classical light wave, depending on the position of the correlation matrix element, is observed. Our results show that it is possible to manipulate the two-photon correlation properties of path-entangled states in waveguide arrays with lattice defects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Native point defects in GaSb

We have applied positron annihilation spectroscopy to study native point defects in Te-doped n-type and nominally undoped p-type GaSb single crystals. The results show that the dominant vacancy defect trapping positrons in bulk GaSb is the gallium monovacancy. The temperature dependence of the average positron lifetime in both p- and n-type GaSb indicates that negative ion type defects with no associated open volume compete with the Ga vacancies. Based on comparison with theoretical predictions, these negative ions are identified as Ga antisites. The concentrations of these negatively charged defects exceed the Ga vacancy concentrations nearly by an order of magnitude. We conclude that the Ga antisite is the native defect responsible for p-type conductivity in GaSb single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proton radiation effects on electronic defect states in MOCVD-grown (010) β -Ga 2 O 3

The impact of 1.8 MeV proton irradiation on metalorganic chemical vapor deposition grown (010) β-Ga 2 O 3 Schottky diodes is presented. It is found that after a 10.8 × 10 13 cm –2 proton fluence the Schottky barrier height of (1.40 ± 0.05 eV) and the ideality factor of (1.05 ± 0.05 ) are unaffected. Capacitance–voltage extracted net ionized doping curves indicate a carrier removal rate of 268 ± 10 cm –1 . The defect states responsible for the observed carrier removal are studied through a combination of deep level transient and optical spectroscopies (DLTS/DLOS) as well as lighted capacitance–voltage (LCV) measurements. The dominating effect on the defect spectrum is due to the E c -2.0 eV defect state observed in DLOS and LCV. This state accounts for ~75 % of the total trap introduction rate and is the primary source of carrier removal from proton irradiation. Of the DLTS detected states, the E c -0.72 eV state dominated but had a comparably smaller contribution to the trap introduction. These two traps have previously been correlated with acceptor-like gallium vacancy-related defects. Several other trap states at E C -0.36, E C -0.63, and E C -1.09 eV were newly detected after proton irradiation, and two pre-existing states at E C -1.2 and E C -4.4 eV showed a slight increase in concentration after irradiation, together accounting for the remainder of trap introduction. However, a pre-existing trap at E c -0.40 eV was found to be insensitive to proton irradiation and, therefore, is likely of extrinsic origin. Furthermore, the comprehensive defect characterization of 1.8 MeV proton irradiation damage can aid the modeling and design for a range of radiation tolerant devices.

42 ENGINEERING↗

Modes of symmetric composite defects in two-dimensional photonic crystals

We consider the modal fields and resonance frequencies of composite defects in two-dimensional photonic crystals (PCs). Using an asymptotic method based on Green's functions, we show that the coupling matrices for the composite defect can be represented as circulant or block-circulant matrices. Using the properties of these matrices, specifically that their eigenvectors are independent of the values of the matrix elements, we obtain modal properties such as dispersion relations, modal cutoff, degeneracy, and symmetry of the mode fields. Using our formulation, we investigate defects arranged on the vertices of regular polygons as well as PC ring resonators with defects arranged on the edges of polygons. Finally, we discuss the impact of band-edge degeneracies on composite-defect modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetically evolving irradiation-induced point defect clusters in UO{sub 2} by molecular dynamics simulation

The evolution of irradiation-induced point defects in UO{sub 2} is captured in molecular dynamics simulations. The approach used circumvents their creation during the ballistic phase of a traditional collision-cascade molecular dynamics simulation but rather focuses on their kinetic evolution. The simulations reveal that in the absence of defects on the cation sublattice, the defects initially present on the anion sublattice recombine and annihilate completely during equilibration. However, in the simultaneous presence of defects on both sublattices, Schottky defects are formed, thereby sequestering the oxygen vacancies. The resulting excess oxygen interstitials form cuboctahedral clusters, whose existence has previously been identified experimentally but whose generation mechanism has not been determined. It is concluded that the cation sublattice is primarily responsible for the radiation tolerance or intolerance of the material.

36 MATERIALS SCIENCE↗

Vortex pinning by compound defects in YBa{sub 2}Cu{sub 3}O{sub 7-delta}.

We investigate the enhancement of vortex pinning by compound defects that are composed of correlated and point defects in a pristine untwinned YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} single crystal. Initial irradiation by high-energy heavy ions to a dose matching field of B{sub {psi}} = 2.0 T increases vortex pinning via columnar defects. Subsequent proton irradiation further enhances the critical current J{sub c}(H) by localizing the vortices near the columnar defects. Measurements of the shift of the irreversibility line for H {parallel} ab plane demonstrate that compound defects consisting of correlated and point disorder may reduce the pinning anisotropy and increase the overall critical current.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Intermolecular bridges and carrier traps in defective C-60 crystals

Native point defects affect the physical properties of electronic materials and related devices. Here we employ first-principles calculations to address the role of vacancies and self-interstitials in the widely used organic semiconductor C{sub 60}. We find that several stable defect configurations introduce levels in the energy-band gap of C{sub 60} fullerite crystals, creating traps for charge carriers. We also find that while certain metastable point-defect structures bear finite magnetic moments, the lowest-energy defect geometries are nonmagnetic. As a result, point defects may play only a secondary role in the appearance of magnetism in irradiated C{sub 60} samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗