Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Plotting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A graphical summary of solar wind electron content observations by Pioneer 6, 8, and 9

Between 1965 and 1972, solar wind density measurements were obtained by Mariner 5 and Pioneer 6, 7, 8, and 9 using a radio science method called the 'dual-frequency experiment'. The measurements and data processing are now terminated. A graphical summary is presented of the best of the resulting data, showing the average electron number density of the solar wind across radio paths that vary in length up to 1.8 AU and that lie broadside to the flow direction. These graphs summarize 3.4 years of observations with a time resolution of 1 hour; the measurements provided 1-min resolution and spanned 7 years. Because the orientation and length of the paths change continually and have a major influence on the interpretation of these data, a spacecraft trajectory chart and a plot of the corotation interval are provided.

Croft, T. A.↗
NASA NTRS1981

Short interval testing of solar cells

A drawback of conventional electrical evaluation procedures regarding solar cells is related to time consuming operations required in the determination of specific parameters, such as the maximum power point, from the plotted curves, and to the transfer of data to a large digital computer for analysis and manipulation. This is especially true when large numbers of cells must be measured. To overcome such drawbacks, a digital short interval tester was designed and constructed. The new tester provides rapid and accurate measurements at constant temperature. The utilization of a light shutter makes it possible to measure up to 200 data points along the I-V curve in less than a second, thus avoiding thermal effects. Because the system is digital, parameters such as the maximum power may be calculated directly from the data.

Saylor, C. R.↗
NASA NTRS1984

Postprocessing for the UCLA climate model

Postprocessing programs written to analyze the results of a general circulation model are described. The model history data is interpolated to pressure surfaces, converted from 64-bit Cyber words to 32 bit IBM words, and transferred to tape for further analysis. The time average program reads the interpolation output tape and produces 15-day time averages. The model outputs a very detailed record for selected grid points. This data is sent to a tape in Cyber full words. The conversion program changes the format of the tape from 64 bit Cyber words to 32 bit IBM words, processing a month of data at a time. The grid-point history sorting program inputs the converted grid point history tape and sorts it by time. The end product is a tape with a time history of each field for every point. After the PBP data has been stored, it can be plotted. The plotting package is flexible, and allows the choice of fields and grid points. The one-dimensional fields are plotted as functions of time, and a daily summary is also produced. For the two-dimensional fields, time-height cross sections and daily summaries are produced. The model plotting package produces plots for all fields on the time average and pressure tapes. These plots include world maps, polar projections, zonal means, vectors, streamlines, and latitude-height plots.

Abeles, J.↗
NASA NTRS1984

The Io decametric emission cone

The Voyager 1 and 2 Planetary Radio Astronomy observations of Jovian decametric radiation (DAM) were transformed into a fixed Io-Jupiter coordinate system for Io longitudes every 10 deg apart starting from 200 to 260 deg (seven plots per spacecaft). An analysis of the data in this coordinate system has shown that the Io-dependent DAM emissions are generated in hollow cones at all frequencies over the fixed Io longitudes studied. The edges of the emission cones are, in many cases, broad in longitude (30 deg or more), with distinct differences found between the characteristics of DAM emission at the edges of the emission cones. The shapes of the DAM emission cones are explained by using three-dimensional ray-tracing calculations within a model Jovian atmosphere.

Green, J. L.↗
NASA NTRS1985

Detailed pressure distribution measurements obtained on several configurations of an aspect-ratio-7 variable twist wing

Detailed pressure distribution measurements were made for 11 twist configurations of a unique, multisegmented wing model having an aspect ratio of 7 and a taper ratio of 1. These configurations encompassed span loads ranging from that of an untwisted wing to simple flapped wings both with and without upper-surface spoilers attached. For each of the wing twist configurations, electronic scanning pressure transducers were used to obtain 580 surface pressure measurements over the wing in about 0.1 sec. Integrated pressure distribution measurements compared favorably with force-balance measurements of lift on the model when the model centerbody lift was included. Complete plots and tabulations of the pressure distribution data for each wing twist configuration are provided.

Holbrook, G. T.↗
NASA NTRS1988

Two-dimensional aerodynamic characteristics of the OLS/TAAT airfoil

Two flight tests have been conducted that obtained extension pressure data on a modified AH-1G rotor system. These two tests, the Operational Loads Survey (OLS) and the Tip Aerodynamics and Acoustics Test (TAAT) used the same rotor set. In the analysis of these data bases, accurate 2-D airfoil data is invaluable, for not only does it allow comparison studies between 2- and 3-D flow, but also provides accurate tables of the airfoil characteristics for use in comprehensive rotorcraft analysis codes. To provide this 2-D data base, a model of the OLS/TAAT airfoil was tested over a Reynolds number range from 3 x 10 to the 6th to 7 x 10 to the 7th and between Mach numbers of 0.34 to 0.88 in the NASA Langley Research Center's 6- by 28-Inch Transonic Tunnel. The 2-D airfoil data is presented as chordwise pressure coefficient plots, as well as lift, drag, and pitching moment coefficient plots and tables.

Watts, Michael E.↗
NASA NTRS1989

VHF radar observations of mesospheric density distrubance caused by Typhoon Susan and tropical storms in the western Pacific area

The atmospheric parameters from the toposphere to the middle atmosphere during Typhoon Susan and tropical storms in May and June 1988 were observed by VHF radar in Taiwan. Time-dependent wind velocities with three-dimensional profiles are plotted by processing the backscattered echo power data and the Doppler spectral width of the signal returns from the VHF radar. The propagation characteristics of the gravity waves excited by the enhanced convection motions of the storms and the density perturbations caused by this gravity wave progagation are determined.

Hung, R. J.↗
NASA NTRS1989

Study of metal corrosion using ac impedance techniques in the STS launch environment

AC impedance measurements were performed to investigate the corrosion resistance of 19 alloys under conditions similar to the STS launch environment. The alloys were: Zirconium 702, Hastelloy C-22, Inconel 625, Hastelloy C-276, Hastelloy C-4, Inconel 600, 7Mo + N, Ferralium 255, Inco Alloy G-3, 20Cb-3, SS 904L, Inconel 825, SS 304LN, SS 316L, SS 317L, ES 2205, SS 304L, Hastelloy B-2, and Monel 400. AC impedance data were gathered for each alloy after one hour immersion time in each of the following three electrolyte solutions: 3.55 percent NaCl, 3.55 percent NaCl-0.1N HCl, and 3.55 percent NaCl-1.0N HCl. The data were analyzed qualitatively using the Nyquist plot and quantitatively using the Bode plot. Polarization resistance, Rp, values were obtained using the Bode plot. Zirconium 702 was the most corrosion resistant alloy in the three electrolytes. The ordering of the other alloys according the their resistance to corrosion varied as the concentration of hydrochloric acid in the electrolyte increased. The corrosion resistance of Zirconium 702 and Ferralium 255 increased as the concentration of hydrochloric acid in the electrolyte increased. The corrosion resistance of the other 17 alloys decreased as the concentration of the hyrdochloric acid in the electrolyte increased.

Calle, Luz M.↗
NASA NTRS1992

Plasma contactor research - 1991

A report describing the operating principles of hollow-cathode-based plasma contactors emitting or collecting electrons from an ambient plasma is summarized. Preliminary experiments conducted to determine the noise generated by these plasma contactors in the emission-current return line and in the plasma near it are described. These noise data are measured as current fluctuations in the return line and to the Langmuir probe and then analyzed using a fast Fourier transform technique. The spectral compositions of the data are characterized using power spectral density plots which are examined to identify possible noise source(s) and production mechanism(s). The precautions taken in the construction and calibration of the instrumentation to assure adequate frequency response are described. Experimental results show that line-current noise levels are typically 2 percent of the electron current being emitted or collected. However, noise levels increase to as much as 20 percent of the electron current at a few electron-collection operating conditions. The frequencies associated with most of the noise were harmonics of the 60 Hz input to system power supplies. Plasma noise had characteristics similar in magnitude and frequency to those for the return-line noise, but they contained additional features at frequencies considered to be related to ion-acoustic instabilities. Also discussed is a new probe positioning system built to facilitate future plasma-contractor research.

Buchholtz, Brett↗
NASA NTRS1992

Sudbury project (University of Muenster-Ontario Geological Survey): Sr-Nd in heterolithic breccias and gabbroic dikes

One major objective of our Sudbury project was to define origin and age of the huge breccia units below and above the Sudbury Igneous Complex (SIC). The heterolithic Footwall Breccia (FB) represents a part of the uplifted crater floor. It contains subrounded fragments up to several meters in size and lithic fragments with shock features (greater than 10 GPa) embedded into a fine- to medium-grained matrix. Epsilon(sub Nd)-epsilon(sub Sr) relationships point to almost exclusively parautochthonous precursor lithologies. The different textures of the matrix reflect the metamorphic history of the breccia layer; thermal annealing by the overlying hot impact melt sheet (SIC) at temperatures greater than 1000 C resulted in melting of the fine crushed material, followed by an episode of metasomatic K-feldspar growth and, finally, formation of low-grade minerals such as actinolite and chlorite. Isotope relationships in the Onaping breccias (Gray and Green Member) are much more complex. All attempts to date the breccia formation failed: Zircons are entirely derived from country rocks and lack the pronounced Pb loss caused by the heat of the slowly cooling impact melt sheet (SIC). Rb-Sr techniques using either lithic fragments of different shock stages or the thin slab method, set time limits for the apparently pervasive alkali mobility in these suevitic breccias. The data array and the intercept in the plots point to a major Rb-Sr fractionation around 1.54 Ga ago. This model age is in the same range as the age obtained for the metasomatic matrix of the FB. Rb-Sr dating of a shock event in impact-related breccias seems to be possible only if their matrix had suffered total melting by the hot melt sheet (FB) or if they contain a high fraction of impact melt (suevitic Onaping breccias), whereas the degree of shock metamorphism in rock or lithic fragments plays a minor role. In the Sudbury case, however, the impact melt in the seuvitic breccias is devitrified and recrystallized, which changed Rb/Sr ratios quite drastically. Therefore, the Onaping breccias give only age limits for alteration and low-grade metamorphism. The Sm-Nd system was not reset during the Sudbury event; clasts as well as the matrix in the FB and in the Onaping breccias show preimpact 'Archean' Nd isotope signatures.

Buhl, D.↗
NASA NTRS1991

Mapping crystal defects with a digital scanning ultramicroscope

A computer controlled scanning ultramicroscope has been built to assist in the characterization of transparent crystals. The device measures the scattering of a focused He-Ne laser beam by crystalline defects. As an XYZ translation table moves the crystal under the ultramicroscope, the scattered light is measured by a photodetector whose output is digitized and recorded. From this data, contour maps or three dimensional perspective plots of the scattering regions of the crystal can be generated to assist in finding patterns of defects which might be correlated with perturbations in the growth process. The verified resolution of the present instrument is about 1 micrometer, which is limited by the minimum step of the stepper-motor driven translation stages, optical diffraction effects and the sensitivity of the detector at the laser light frequency. The instrument was used to build a database of defects patterns in commercial laboratory grown triglycine sulphate (TGS) crystals, and to map defects in a TGS crystal grown from aqueous solution during the flight of Spacelab 3. This crystal shows indications of a reduction both in the generation of defects at the seed-new growth interface and in their propagation into the new crystal.

Springer, J. M.↗
NASA NTRS1992

Structural-acoustic coupling in aircraft fuselage structures

Results of analytical and experimental investigations of structural-acoustic coupling phenomenon in an aircraft fuselage are described. The structural and acoustic cavity modes of DC-9 fuselage were determined using a finite element approach to vibration analysis. Predicted structural and acoustic dispersion curves were used to determine possible occurrences of structural-acoustic coupling for the fuselage. An aft section of DC-9 aircraft fuselage, housed in an anechoic chamber, was used for experimental investigations. The test fuselage was excited by a shaker and vibration response and interior sound field were measured using accelerometer and microphone arrays. The wavenumber-frequency structural and cavity response maps were generated from the measured data. Analysis and interpretation of the spatial plots and wavenumber maps provided the required information on modal characteristics, fuselage response and structural-acoustic coupling.

Mathur, Gopal P.↗
NASA NTRS1924

Static stability of seaplane floats and hulls

Values of lateral and longitudinal metacentric heights for various seaplanes were calculated by means of approximate formulae derived here. The data are given in tabular form. Upon plotting these metacentric heights against the corresponding gross weights, it appears that the metacentric height is approximately a straight line function of the gross weight. For the lateral metacentric height GM = 13 + .002 W and for longitudinal metacentric height GM = 15 + .002 W, GM is in feet and the gross weight (W) is in pounds. Although only approximate, it is thought that the values indicated here are a reliable guide to current practice. It is recommended that the longitudinal and lateral metacentric heights be made equal and of the value given by GM = 15 = .002 W. The proper length or spacing required to satisfy the indicated value may then be obtained from substitution in the approximate formulae for metacentric height.

Diehl, W S↗
NASA NTRS1993

The near-infrared Tully-Fisher relation - A preliminary study of the Coma and Abell 400 clusters

We have started a large project to study the NIR Tully-Fisher (TF) relation using H- and I-band surface photometry of spiral galaxies. A preliminary study of 20 spirals in the Coma and Abell 400 clusters is presented. The NIR images have been used to derive accurate inclinations and total magnitudes, and rotational linewidths are measured from high-quality 21-cm Arecibo data. The scatter in the Coma TF plot is found to be 0.19 mag in the H band and 0.20 mag in the I band for a set of 13 galaxies, if we assume that they are all at the same distance. The deviation of the Coma galaxies from the best-fit Tully-Fisher relation is correlated with their redshift, indicating that some of the galaxies are not bound to the cluster. Indeed, if we treat all the galaxies in the Coma sample as undergoing free Hubble expansion, the TF scatter drops to 0.12 and 0.13 mag for the H- and I-band datasets, respectively. The Abell 400 sample is best fit by a common distance model, yielding a scatter of 0.12 mag for seven galaxies in H using a fixed TF slope. We are in the process of studying cluster and field spirals out to about 10,000 km/s in order to calibrate the NIR TF relation and will apply it to more nearby galaxies to measure the peculiar velocity field in the local universe.

Guhathakurta, Puragra↗
NASA NTRS2000

Some Long-Standing Issues Arising From Comparisons Between TOMS and The Ground-Based Ozone Network

Data from the series of Total Ozone Mapping Spectrometers (TOMS) have been compared to column ozone measurements taken by ground-based systems (Dobsons, Brewers and Filtermeters). On average, the comparisons show good agreement, with approximately 80% of the ground stations having less than a 2.5% standard deviation when compared to TOMS on a monthly mean basis. There are, however, differences that imply possible errors either in the TOMS ozone retrieval algorithm or in the basic assumptions used by the ground-based instruments. Some of the issues arising from these differences are: What are the relative calibrations of TOMS instruments? Why do the calibrations of the ground-based stations vary as much as they do with respect to TOMS as a transfer standard? Why are the TOMS data so much larger (approximately 6%) than the ground-based data in Antarctica and other ice-covered locations? Why is there seasonality in the difference between TOMS and ground-based stations in the Southern Hemisphere? Why are the differences a function of total ozone? Where and why are the differences a function of reflectivity? Why do some terrain and land-sea boundary features appear in the TOMS ozone data? The above issues will be highlighted by using data from TOMS and the ground stations. Plots of the individual station differences will be available.

Labow, Gordon J.↗
NASA NTRS2002

Spectral Measurements of Meteorite Powders: Implications for 433 Eros

We are re-examining the regions defined by different meteorite classes in Band Area Ratio plots by measuring more meteorite samples. These data will allow us to better determine asteroid compositions from spectral measurements. Additional information is contained in the original extended abstract.

Burbine, T. H.↗
NASA NTRS2002

Experimental Test Results of Energy Efficient Transport (EET) High-Lift Airfoil in Langley Low-Turbulence Pressure Tunnel

This report describes the results of an experimental study conducted in the Langley Low-Turbulence Pressure Tunnel to determine the effects of Reynolds number and Mach number on the two-dimensional aerodynamic performance of the Langley Energy Efficient Transport (EET) High-Lift Airfoil. The high-lift airfoil was a supercritical-type airfoil with a thickness-to- chord ratio of 0.12 and was equipped with a leading-edge slat and a double-slotted trailing-edge flap. The leading-edge slat could be deflected -30 deg, -40 deg, -50 deg, and -60 deg, and the trailing-edge flaps could be deflected to 15 deg, 30 deg, 45 deg, and 60 deg. The gaps and overlaps for the slat and flaps were fixed at each deflection resulting in 16 different configurations. All 16 configurations were tested through a Reynolds number range of 2.5 to 18 million at a Mach number of 0.20. Selected configurations were also tested through a Mach number range of 0.10 to 0.35. The plotted and tabulated force, moment, and pressure data are available on the CD-ROM supplement L-18221.

Morgan, Harry L., Jr.↗
NASA NTRS2003

Substorm Evolution in the Near-Earth Plasma Sheet

The goal of this project is to determine precursors and signatures of local substorm onset and how they evolve in the plasma sheet using the Geotail near-Earth database. This project is part of an ongoing investigation involving this PI, Nelson Maynard (Mission Research Corporation), and William Burke (AFRL) toward an empirical understanding of the onset and evolution of substorms. The first year began with dissemination of our CRRES findings, which included an invited presentation and major publication. The Geotail investigation began with a partial survey of onset signature types at distances X less than 15 R(sub E) for the first five months (March-July 1995) of the Geotail near-Earth mission. During the second year, Geotail data from March 1995 to present were plotted. Various signatures at local onset were catalogued for the period through 1997. During this past year we performed a survey of current-disruption-like (CD-like) signatures at distances X less than or equal to 14 R(sub E) for the three years 1995-1997.

Erickson, Gary M.↗