Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computational imaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Computation of Earth Science Products on Spaceborne Platforms

Spaceborne sensors like NASA's Hyperion hyperspectral imager generate huge data volumes, and several near-term trends indicate that data volumes will only increase. Next-generation hyperspectral missions, such as NASA's Hyperspectral Infrared Imager (HyspIRI), will operate at higher duty cycles and higher data rates, and their users will expect products to be generated from the data in near real time [1]. Barring a sudden advance in satellite downlink capacity, these trends point to a need to process data and generate products onboard the spacecraft. Rather than downlink an entire hyperspectral image cube, onboard processing enables satellites to downlink partial or completed scientific data products, which are often one to two orders of magnitude smaller than the original image. In addition, a satellite with onboard data processing resources and direct broadcast transmission equipment could send data products directly to first responders, research scientists or other users on the ground. Next-generation space-capable data processors will have a combination of reconfigurable gate arrays, digital signal processors and general-purpose CPUs. Correctly programmed and configured, these resources are sufficient to run sophisticated data analysis programs, including hyperspectral image processing algorithms that commonly run on desktop computers [2]. This paper describes how we implemented one such program, the HSEG hierarchical image segmentation algorithm, software commonly used on desktop and parallel processors, on a hardware platform designed to mimic a next-generation space-capable data processor [3]. We also describe our approach to porting the algorithm to and optimizing it for the new platform, and determine the expected performance gains enabled by our design. This extended abstract will describe the HSEG algorithm and hardware platform in greater detail, provide an analysis of the key function within the algorithm that required hardware acceleration, and describe our implementation of that function in hardware.

Fisher, Kevin↗

X-ray digital imaging petrography of lunar mare soils: modal analyses of minerals and glasses

It is essential that accurate modal (i.e., volume) percentages of the various mineral and glass phases in lunar soils be used for addressing and resolving the effects of space weathering upon reflectance spectra, as well as for their calibration such data are also required for evaluating the resource potential of lunar minerals for use at a lunar base. However, these data are largely lacking. Particle-counting information for lunar soils, originally obtained to study formational processes, does not provide these necessary data, including the percentages of minerals locked in multi-phase lithic fragments and fused-soil particles, such as agglutinates. We have developed a technique for modal analyses, sensu stricto, of lunar soils, using digital imaging of X-ray maps obtained with an energy-dispersive spectrometer mounted on an electron microprobe. A suite of nine soils (90 to 150 micrometers size fraction) from the Apollo 11, 12, 15, and 17 mare sites was used for this study. This is the first collection of such modal data on soils from all Apollo mare sites. The abundances of free-mineral fragments in the mare soils are greater for immature and submature soils than for mature soils, largely because of the formation of agglutinitic glass as maturity progresses. In considerations of resource utilization at a lunar base, the best lunar soils to use for mineral beneficiation (i.e., most free-mineral fragments) have maturities near the immature/submature boundary (Is/FeO approximately or = 30), not the mature soils with their complications due to extensive agglutination. The particle data obtained from the nine mare soils confirm the generalizations for lunar soils predicted by L.A. Taylor and D.S. McKay (1992, Lunar Planet Sci. Conf. 23rd, pp. 1411-1412 [Abstract]).

NASA Discipline Exobiology↗

Robust incoherent fiber optic bundle decoder

Apparatus and method for calibrating an incoherent fiber optic bundle for use in transmitting visual or infrared coherent images. The apparatus includes a computer, a computer video monitor, an objective lens adjacent to the input end of the bundle, a second lens adjacent the output end of the bundle, and a CCD camera. The camera transmits video data to the monitor to produce an illuminated fiber optic image. The coordinates for the center of each fiber is found through an imaging process and the output fibers coordinates are related to the input fiber coordinates and processed in the computer to produce a mapping lookup-table (LUT) unique to the specific fiber bundle. Remapping of the LUT due to changes in the lens focus, CCD camera, or the addition of an infrared filter is accomplished by a software utility in the computer.

Roberts, Hilary E.↗

Low-cost digital image processing at the University of Oklahoma

Computer assisted instruction in remote sensing at the University of Oklahoma involves two separate approaches and is dependent upon initial preprocessing of a LANDSAT computer compatible tape using software developed for an IBM 370/158 computer. In-house generated preprocessing algorithms permits students or researchers to select a subset of a LANDSAT scene for subsequent analysis using either general purpose statistical packages or color graphic image processing software developed for Apple II microcomputers. Procedures for preprocessing the data and image analysis using either of the two approaches for low-cost LANDSAT data processing are described.

Harrington, J. A., Jr.↗

Digital mammography, cancer screening: Factors important for image compression

The use of digital mammography for breast cancer screening poses several novel problems such as development of digital sensors, computer assisted diagnosis (CAD) methods for image noise suppression, enhancement, and pattern recognition, compression algorithms for image storage, transmission, and remote diagnosis. X-ray digital mammography using novel direct digital detection schemes or film digitizers results in large data sets and, therefore, image compression methods will play a significant role in the image processing and analysis by CAD techniques. In view of the extensive compression required, the relative merit of 'virtually lossless' versus lossy methods should be determined. A brief overview is presented here of the developments of digital sensors, CAD, and compression methods currently proposed and tested for mammography. The objective of the NCI/NASA Working Group on Digital Mammography is to stimulate the interest of the image processing and compression scientific community for this medical application and identify possible dual use technologies within the NASA centers.

Clarke, Laurence P.↗

Multiple loop activations and continuous energy release in the solar flare of June 15, 1973

The spatial and temporal evolution of the high-temperature plasma in the solar flare of June 15, 1973, is studied using XUV spectroheliograms and X-ray filtergrams obtained from Skylab. The analysis focuses on the changing forms and brightness of Fe XXIII 263-A and Fe XXIV 255-A images. Temperatures and emission measures computed for different times during the flare are compared with those derived from Solrad-9 flux data, the electron temperature in the bright compact core of the Fe XXIV image is determined, and a coronal origin is suggested for this bright core. The observational evidence shows that the overall flare event involved a number of different preexisting loops and arches which were activated in succession. The activation and heating are found to have persisted well past the end of the burst phase, implying that the energy release did not end when the impulsive phase was over. The overall development of the flare is summarized on the basis of the observed order of appearance of the loops.

Widing, K. G.↗

Voyager Cartography

The Jovian and Saturnian satellites are being mapped at several scales from Voyager 1 and 2 data. The maps include specially formatted color mosaics, controlled photomosaics, and airbrush maps. More than 500 Voyager images of the Jovian and Saturnian satellites were radiometrically processed in preparation for cartographic processing. Of these images, 235 were geometrically transformed to map projections for base mosaic compilations. Special techniques for producing hybrid photomosaic/airbrush maps of Callisto are under investigation. The techniques involve making controlled computer mosaics of all available images with highest resolution images superimposed on lowest resolution images. The mosaics are then improved by airbrushing: seams and artifacts are removed, and image details enhanced that had been lost by saturation in some images. A controlled mosaic of the northern hemisphere of Rhea is complete, as is all processing for a similar mosaic of the equatorial region. Current plans and status of the various series are shown in a table.

Batson, R. M.↗

1985 Nuclear Science Symposium, 32nd, and 1985 Symposium on Nuclear Power Systems, 17th, San Francisco, CA, October 23-25, 1985, Proceedings

The present conference ranges over topics in high energy physics instrumentation, detectors, nuclear medical applications, health physics and environmental monitoring, reactor instrumentation, nuclear spacecraft instrumentation, the 'Fastbus' data acquisition system, circuits and systems for nuclear research facilities, and the development status of nuclear power systems. Specific attention is given to CCD high precision detectors, a drift chamber preamplifier, a Cerenkov ring imaging detector, novel scintillation glasses and scintillating fibers, a modular multidrift vertex detector, radial wire drift chambers, liquid argon polarimeters, a multianode photomultiplier, the reliability of planar silicon detectors, the design and manufacture of wedge and strip anodes, ultrafast triode photodetectors, photomultiplier tubes, a barium fluoride plastic scintillator, a fine grained neutron hodoscope, the stability of low leakage silicon photodiodes for crystal calorimeters, and X-ray proportional counters. Also considered are positron emission tomography, single photon emission computed tomography, nuclear magnetic resonance imaging, Geiger-Muller detectors, nuclear plant safeguards, a 32-bit Fastbus computer, an advanced light water reactor, and nuclear plant maintenance.

Source record↗

Learning receptor positions from imperfectly known motions

An algorithm is described for learning image interpolation functions for sensor arrays whose sensor positions are somewhat disordered. The learning is based on failures of translation invariance, so it does not require knowledge of the images being presented to the visual system. Previously reported implementations of the method assumed the visual system to have precise knowledge of the translations. It is demonstrated that translation estimates computed from the imperfectly interpolated images can have enough accuracy to allow the learning process to converge to a correct interpolation.

Ahumada, Albert J., Jr.↗

The rotation period, direction of the north pole, and geodetic control network of Venus

Three related activities that use Magellan data to derive improved estimates of the rotation period and direction of the spin axis of Venus are discussed. These are the computation of the Magellan geodetic control network, the use of measurement landmarks identified in overlapping image strips to improve the spacecraft ephemeris, and the use of common points identified on both the Venera 15/16 and the Magellan images. Since seven years separate the acquisition of the Magellan and Venera images, it should be possible to compute an accurate rotation period and possibly the spin vector of Venus.

Davies, M. E.↗

The Galileo Tape Recorder Rewind Operation Anomaly

On October 11, 1995, the Galileo spacecraft executed a sequence to record three approach images of Jupiter on the spacecraft's tape recorder, rewind the tape, and play back the images at the appropriate data rate consistent with the downlink performance. The recording of the images was performed and the spacecraft computer commanded the tape recorder to rewind the tape to the beginning of the first image. The rewind command was started at the proper time but the tape never got to the beginning of the image data. The analyses and tests that followed allowed a conclusive determination of the failure mechanism and indicated a strategy that could be used to prevent the untimely demise of the mission.

Johnson, Michael R.↗

Automated Mapping of Flood Events in the Mississippi River Basin Utilizing NASA Earth Observations

The Mississippi River Basin is the fourth largest drainage basin in the world, and is susceptible to multi-level flood events caused by heavy precipitation, snow melt, and changes in water table levels. Conducting flood analysis during periods of disaster is a challenging endeavor for NASA's Short-term Prediction Research and Transition Center (SPoRT), Federal Emergency Management Agency (FEMA), and the U.S. Geological Survey's Hazards Data Distribution Systems (USGS HDDS) due to heavily-involved research and lack of manpower. During this project, an automated script was generated that performs high-level flood analysis to relieve the workload for end-users. The script incorporated Landsat 8 Operational Land Imager (OLI) tiles and utilized computer-learning techniques to generate accurate water extent maps. The script referenced the Moderate Resolution Imaging Spectroradiometer (MODIS) land-water mask to isolate areas of flood induced waters. These areas were overlaid onto the National Land Cover Database's (NLCD) land cover data, the Oak Ridge National Laboratory's LandScan data, and Homeland Infrastructure Foundation-Level Data (HIFLD) to determine the classification of areas impacted and the population density affected by flooding. The automated algorithm was initially tested on the September 2016 flood event that occurred in Upper Mississippi River Basin, and was then further tested on multiple flood events within the Mississippi River Basin. This script allows end users to create their own flood probability and impact maps for disaster mitigation and recovery efforts.

Bartkovich, Mercedes↗

Low-cost data analysis systems for processing multispectral scanner data

A research-oriented data analysis system was developed which is used for evaluating complex remote sensor systems and for development of techniques for application of remotely sensed data. Some modular hardware components were developed which may be added to one's existing facilities to establish a low-cost data analysis system for processing multispectral scanner data. Software modules which are compatible with small general purpose digital computers process and analyze remote sensor data, and convert it to information needed by users. The software modules are written in FORTRAN IV language for ease of transfer to other computer systems. The basic hardware and software system requirements are defined for some low-cost data analysis systems consisting of an image display system, a small general purpose digital computer, and an output recording device. The hardware modules consist of: a LANDSAT MSS data reformatting program; a series of spectral pattern recognition programs required to generate surface classification maps and tabular information; programs to convert computer generated maps from image space to a geographically referenced base; programs to extract data and irregularly shaped areas and to produce thematic maps of the designated areas; and programs to tabulate acreages of selected classification categories. Some off-the-shelf, inexpensive digital image display systems are described.

Whitley, S. L.↗

Hypermedia = hypercommunication

New hardware and software technology gave application designers the freedom to use new realism in human computer interaction. High-quality images, motion video, stereo sound and music, speech, touch, gesture provide richer data channels between the person and the machine. Ultimately, this will lead to richer communication between people with the computer as an intermediary. The whole point of hyper-books, hyper-newspapers, virtual worlds, is to transfer the concept and relationships, the 'data structure', from the mind of creator to that of user. Some of the characteristics of this rich information channel are discussed, and some examples are presented.

Laff, Mark R.↗

Determining Directional Emittance With An Infrared Imager

Directional emittances of flat specimen of smooth-surfaced, electrically nonconductive material at various temperatures computed from measurements taken by infrared radiometric imager operating in conjunction with simple ancillary equipment. Directional emittances useful in extracting detailed variations of surface temperatures from infrared images of curved, complexly shaped other specimens of same material. Advantages: simplification of measurement procedure and reduction of cost.

Daryabeigi, Kamran↗

Software to model AXAF-I image quality

A modular user-friendly computer program for the modeling of grazing-incidence type x-ray optical systems has been developed. This comprehensive computer software GRAZTRACE covers the manipulation of input data, ray tracing with reflectivity and surface deformation effects, convolution with x-ray source shape, and x-ray scattering. The program also includes the capabilities for image analysis, detector scan modeling, and graphical presentation of the results. A number of utilities have been developed to interface the predicted Advanced X-ray Astrophysics Facility-Imaging (AXAF-I) mirror structural and thermal distortions with the ray-trace. This software is written in FORTRAN 77 and runs on a SUN/SPARC station. An interactive command mode version and a batch mode version of the software have been developed.

Ahmad, Anees↗

The use of computer graphic techniques for the determination of ventricular function.

Description of computer techniques employed to increase the speed, accuracy, reliability, and scope of angiocardiographic analyses determining human heart dimensions. Chamber margins are traced with a Calma 303 digitizer from projections of the angiographic films. The digitized margins of the ventricular images are filed in a computer for subsequent analysis. The margins can be displayed on the television screen of a graphics unit for individual study or they can be viewed in real time (or at any selected speed) to study dynamic changes in the chamber outline. The construction of three dimensional images of the ventricle is described.

Sandler, H.↗

Automated analysis of video data

A software/hardware system designed and developed to perform automated video imagery analysis is described. Major elements included in the analysis system are: (1) sampling oscilloscope; (2) programmable trigger unit; (3) central computer; and (4) software processing library. The function of the scope and trigger unit, in conjunction with the control computer, is to digitize the selected portion of the video image and store as amplitude and time data in computer memory. Evaluation of the video data, analogus to interpretation of a visual image, is accomplished by the processing software. It is indicated that this technique of video image analysis is applicable to a wide variety of nonaerospace applications involving video data and image analysis.

Hafner, D. J.↗