SEARCH · Engineering Papers

Results for “Coded computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗

NASA NTRS1989

Creation of fully vectorized FORTRAN code for integrating the movement of dust grains in interplanetary environments

The main objective is to improve the performance of a specific FORTRAN computer code from the Planetary Sciences Division of NASA/Johnson Space Center when used on a modern vectorizing supercomputer. The code is used to calculate orbits of dust grains that separate from comets and asteroids. This code accounts for influences of the sun and 8 planets (neglecting Pluto), solar wind, and solar light pressure including Poynting-Robertson drag. Calculations allow one to study the motion of these particles as they are influenced by the Earth or one of the other planets. Some of these particles become trapped just beyond the Earth for long periods of time. These integer period resonances vary from 3 orbits of the Earth and 2 orbits of the particles to as high as 14 to 13.

Colquitt, Walter↗

NASA NTRS1994

SCISEAL: A CFD code for analysis of fluid dynamic forces in seals

A viewgraph presentation is made of the objectives, capabilities, and test results of the computer code SCISEAL. Currently, the seal code has: a finite volume, pressure-based integration scheme; colocated variables with strong conservation approach; high-order spatial differencing, up to third-order; up to second-order temporal differencing; a comprehensive set of boundary conditions; a variety of turbulence models and surface roughness treatment; moving grid formulation for arbitrary rotor whirl; rotor dynamic coefficients calculated by the circular whirl and numerical shaker methods; and small perturbation capabilities to handle centered and eccentric seals.

Athavale, Mahesh↗

NASA NTRS1986

Analytical investigation of rotor wake formation and geometry

A number of refinements in the computer code were worked out and tested. Three codes have been written to date. One program is for an isolated wing and is being used to compare with data for the vortex wake (Weston). The second code is for an isolated wing with a streamwise vortex passing above it. This program is being used to validate the computational procedure for incorporating the vortex into the Euler equation calculations. The third program is the hovering rotor code which is the overall objective of the research. The optimization calculations for a hovering helicopter rotor have been completed.

Miller, R.↗

NASA NTRS1996

Determination of Thermal State of Charge in Solar Heat Receivers

The research project at Howard University seeks to develop analytical and numerical capabilities to study heat transfer and fluid flow characteristics, and the prediction of the performance of solar heat receivers for space applications. Specifically, the study seeks to elucidate the effects of internal and external thermal radiation, geometrical and applicable dimensionless parameters on the overall heat transfer in space solar heat receivers. Over the last year, a procedure for the characterization of the state-of-charge (SOC) in solar heat receivers for space applications has been developed. By identifying the various factors that affect the SOC, a dimensional analysis is performed resulting in a number of dimensionless groups of parameters. Although not accomplished during the first phase of the research, data generated from a thermal simulation program can be used to determine values of the dimensionless parameters and the state-of-charge and thereby obtain a correlation for the SOC. The simulation program selected for the purpose is HOTTube, a thermal numerical computer code based on a transient time-explicit, axisymmetric model of the total solar heat receiver. Simulation results obtained with the computer program are presented the minimum and maximum insolation orbits. In the absence of any validation of the code with experimental data, results from HOTTube appear reasonable qualitatively in representing the physical situations modeled.

Glakpe, E. K.↗

NASA NTRS1990

Experimental and computational surface and flow-field results for an all-body hypersonic aircraft

The objective of the present investigation is to establish a benchmark experimental data base for a generic hypersonic vehicle shape for validation and/or calibration of advanced computational fluid dynamics computer codes. This paper includes results from the comprehensive test program conducted in the NASA/Ames 3.5-foot Hypersonic Wind Tunnel for a generic all-body hypersonic aircraft model. Experimental and computational results on flow visualization, surface pressures, surface convective heat transfer, and pitot-pressure flow-field surveys are presented. Comparisons of the experimental results with computational results from an upwind parabolized Navier-Stokes code developed at Ames demonstrate the capabilities of this code.

Lockman, William K.↗

NASA NTRS1992

Flow over an all-body hypersonic aircraft - Experiment and computation

The objective of the present investigation is to establish a benchmark experimental data base for a generic hypersonic vehicle shape for validation and/or calibration of advanced computational fluid dynamics computer codes. This paper includes results from the comprehensive test program conducted in the NASA Ames 3.5-ft Hypersonic Wind Tunnel for a generic all-body hypersonic aircraft model. Experimental and computational results on flow visualization, surface pressures, surface convective heat transfer, and pilot-pressure flowfield surveys are presented. Comparisons of the experimental results with computational results from an upwind parabolized Navier-Stokes code developed at NASA Ames demonstrate the capabilities of this code.

William K. Lockman↗

NASA NTRS1982

Computer program for prediction of fuel consumption statistical data for an upper stage three-axes stabilized on-off control system

A FORTRAN coded computer program and method to predict the reaction control fuel consumption statistics for a three axis stabilized rocket vehicle upper stage is described. A Monte Carlo approach is used which is more efficient by using closed form estimates of impulses. The effects of rocket motor thrust misalignment, static unbalance, aerodynamic disturbances, and deviations in trajectory, mass properties and control system characteristics are included. This routine can be applied to many types of on-off reaction controlled vehicles. The pseudorandom number generation and statistical analyses subroutines including the output histograms can be used for other Monte Carlo analyses problems.

Source record↗

NASA NTRS1986

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three-dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗

NASA NTRS1991

Pressure measurements in a low-density nozzle plume for code verification

Measurements of Pitot pressure were made in the exit plane and plume of a low-density, nitrogen nozzle flow. Two numerical computer codes were used to analyze the flow, including one based on continuum theory using the explicit MacCormack method, and the other on kinetic theory using the method of direct-simulation Monte Carlo (DSMC). The continuum analysis was carried to the nozzle exit plane and the results were compared to the measurements. The DSMC analysis was extended into the plume of the nozzle flow and the results were compared with measurements at the exit plane and axial stations 12, 24 and 36 mm into the near-field plume. Two experimental apparatus were used that differed in design and gave slightly different profiles of pressure measurements. The DSMC method compared well with the measurements from each apparatus at all axial stations and provided a more accurate prediction of the flow than the continuum method, verifying the validity of DSMC for such calculations.

Penko, Paul F.↗

NASA NTRS1991

Pressure measurements in a low-density nozzle plume for code verification

Penko, Paul F.↗

NASA NTRS1992

HSCT mission analysis of waverider designs

In the second quarter the development of the two waverider design tools was continued, and the groundwork necessary for the incorporation of waverider technology into the realm of the High Speed Civil Transports (HSCT's) was laid out. Advances in each of these areas is summarized. Work on the WIPAR code included the addition of an upper surface geometry generator and characteristic flow solver and the inclusion of viscous analysis in the performance computations. Details of these changes are given. In the course of the second project quarter, much of the analysis performed during the first quarter was incorporated into a working computer code. To date, utilities were developed for the definition of arbitrary 3-D shock surfaces, the computation of post-shock flow conditions, and the marching of the solution in a roughly cross-stream direction away from the shock surface. These utilities are briefly described. During the second quarter groundwork for the analysis of complete configurations was initiated. This involved the development of computational utilities for the integration of powerplants with the waverider forebodies, and the acquisition of a number of configuration analysis software packages. Work in these areas is discussed.

Source record↗

DOE OSTI2020

SNL-NJOY-2016

This is a wrapper around the LANL NJOY-2016 code that interfaces with extended code capabilities and minor modification of the LANL NJOY-2016 code that supports modeling radiation damage to materials. The NJOY Nuclear Data Processing System is a modular computer code designed to read evaluated data in ENDF format, transform the data in various ways, and output the results as libraries designed to be used in various applications. The wrapper provided here permits Sandia-specific control parameters to be used in the input data file. The modifications incorporated here enhance the ability of NJOY to address material damage response functions for many materials, e.g. to include the NRT and arc-dpa forms of the damage energy in addition to the default NJOY-2016 implementation of the sharp-threshold Kinchin-Pease threshold energy treatment. All of the modifications provided here are being made available to the GitHub-based NJOY-2016 code. As useful enhancements found here are incorporated into the baseline NJOY-2016 code, they will be eliminated from this version so as to maintain our compatibility with the baseline NJOY-2016 code. SAND2020-13060 M Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA00035

Griffin, Patrick↗

NASA NTRS1978

Computer Program for the Design and Off-Design Performance of Turbojet and Turbofan Engine Cycles

The rapid computer program is designed to be run in a stand-alone mode or operated within a larger program. The computation is based on a simplified one-dimensional gas turbine cycle. Each component in the engine is modeled thermo-dynamically. The component efficiencies used in the thermodynamic modeling are scaled for the off-design conditions from input design point values using empirical trends which are included in the computer code. The engine cycle program is capable of producing reasonable engine performance prediction with a minimum of computer execute time. The current computer execute time on the IBM 360/67 for one Mach number, one altitude, and one power setting is about 0.1 seconds. about 0.1 seconds. The principal assumption used in the calculation is that the compressor is operated along a line of maximum adiabatic efficiency on the compressor map. The fluid properties are computed for the combustion mixture, but dissociation is not included. The procedure included in the program is only for the combustion of JP-4, methane, or hydrogen.

Morris, S. J.↗

NASA NTRS1983

Effects of viscosity on transonic-aerodynamic and aeroelastic characteristics of oscillating airfoils

Studies were made to investigate the effects of viscosity on aerodynamic and aeroelastic characteristics of oscillating airfoils. The computer code LTRAN2 (viscous), which is based on a small disturbance aerodynamic theory, was used to make aerodynamic computations. Two viscous models, the viscous-ramp model and the lag-entrainment model were considered. The unsteady viscous effects were obtained by use of the quasi-steady assumptions. Two cases, a conventional airfoil, NACA 64A010, and a supercritical airfoil, MBB-A3, were studied at Mach numbers 0.796 and 0.7557, respectively. For both the airfoils, steady and unsteady aerodynamic computations were made by using inviscid and viscous theories. The steady and the unsteady results for the NACA 64A010 airfoil and the steady results for the MBB-A3 airfoil were compared with the available wind-tunnel results. Flutter speeds were computed for both airfoils by using the U-g method and the effects of viscosity on the airfoils were studied. Results from the viscous methods show improvements over the inviscid method.

Guruswamy, P.↗

NASA NTRS1985

Non-isentropic unsteady transonic small disturbance theory

Modifications to transonic small disturbance theory (TSD) which more accurately model the Euler equations and seem to remove the problem of nonunique potential flow solutions are presented. The modifications are implemented in the two-dimensional computer code XTRAN2L, and steady and unsteady flow calculations made for the NACA 0012, NLR 7301, and NACA 64A010A airfoils. Comparisons are made with unmodified and modified TSD, Euler, and full potential theories and with experimental data. The modified theory requires only minor coding changes in existing algorithms for calculating small disturbance flows, and results in relatively small increases in computational cost.

Fuglsang, D. F.↗

NASA NTRS1986

The RANDOM computer program: A linear congruential random number generator

The RANDOM Computer Program is a FORTRAN program for generating random number sequences and testing linear congruential random number generators (LCGs). The linear congruential form of random number generator is discussed, and the selection of parameters of an LCG for a microcomputer described. This document describes the following: (1) The RANDOM Computer Program; (2) RANDOM.MOD, the computer code needed to implement an LCG in a FORTRAN program; and (3) The RANCYCLE and the ARITH Computer Programs that provide computational assistance in the selection of parameters for an LCG. The RANDOM, RANCYCLE, and ARITH Computer Programs are written in Microsoft FORTRAN for the IBM PC microcomputer and its compatibles. With only minor modifications, the RANDOM Computer Program and its LCG can be run on most micromputers or mainframe computers.

Miles, R. F., Jr.↗

NASA NTRS1989

Effects of cosmic rays on single event upsets

Assistance was provided to the Brookhaven Single Event Upset (SEU) Test Facility. Computer codes were developed for fragmentation and secondary radiation affecting Very Large Scale Integration (VLSI) in space. A computer controlled CV (HP4192) test was developed for Terman analysis. Also developed were high speed parametric tests which are independent of operator judgment and a charge pumping technique for measurement of D(sub it) (E). The X-ray secondary effects, and parametric degradation as a function of dose rate were simulated. The SPICE simulation of static RAMs with various resistor filters was tested.

Venable, D. D.↗