Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Locomotor activity and tissue levels following acute administration of lambda- and gamma-cyhalothrin in rats

Pyrethroids produce neurotoxicity that depends, in part, on the chemical structure. Common behavioral effects include locomotor activity changes and specific toxic syndromes (types I and II). In general these neurobehavioral effects correlate well with peak internal dose metrics. Products of cyhalothrin, a type II pyrethroid, include mixtures of isomers (e.g., λ-cyhalothrin) as well as enriched active isomers (e.g., γ-cyhalothrin). We measured acute changes in locomotor activity in adult male rats and directly correlated these changes to peak brain and plasma concentrations of λ- and γ-cyhalothrin using a within-subject design. One-hour locomotor activity studies were conducted 1.5 h after oral gavage dosing, and immediately thereafter plasma and brains were collected for analyzing tissue levels using LC/MS/MS methods. Both isomers produced dose-related decreases in activity counts, and the effective dose range for γ-cyhalothrin was lower than for λ-cyhalothrin. Doses calculated to decrease activity by 50% were 2-fold lower for the γ-isomer (1.29 mg/kg) compared to λ-cyhalothrin (2.65 mg/kg). Salivation, typical of type II pyrethroids, was also observed at lower doses of γ-cyhalothrin. Administered dose correlated well with brain and plasma concentrations, which furthermore showed good correlations with activity changes. Brain and plasma levels were tightly correlated across doses. While γ-cyhalothrin was 2-fold more potent based on administered dose, the differences based on internal concentrations were less, with γ-cyhalothrin being 1.3- to 1.6-fold more potent than λ-cyhalothrin. These potency differences are consistent with the purity of the λ-isomer (approximately 43%) compared to the enriched isomer γ-cyhalothrin (approximately 98%). Thus, administered dose as well as differences in cyhalothrin isomers is a good predictor of behavioral effects. - Highlights: • Acute changes in locomotor activity were produced by λ- and γ-cyhalothrin. • γ-Cyhalothrin was about 2-fold more potent than λ-cyhalothrin. • Brain and plasma levels were tightly correlated across doses. • Activity changes correlated well with brain and plasma concentrations.

60 APPLIED LIFE SCIENCES↗

Stabilizing alkaline fuel cells with a niobium-doped brookite titanium dioxide catalyst support

Anion-exchange membrane fuel cells represent a promising and scalable approach for hydrogen energy utilization. However, their development is hindered by the weak bonding between metal catalysts and carbon supports, along with challenges in fabricating electronically/ionically conductive electrodes. Here, we report a composite cathode of Nb-doped brookite TiO 2 nanorods that have robust stability when combined with Pt nanoscale catalysts in an alkaline fuel cell. The composite cathode, fabricated without the addition of an ionomer, delivers a power density of 419 mW cm −2 at a current density of 650 mA cm −2 and a voltage retention of 81% at 100 mA cm −2 after 25 h, substantially outperforming a cathode fabricated from commercial Pt/C. Further investigations of the chemical structure, anion exchange capacity, and mass transfer resistance reveal that a solvent residue derived from N-methylpyrrolidone plays an important role in charge transfer and mass transport in the alkaline fuel cell.

alkaline fuel cell↗

Characterizing the localization of organic C on mineral surfaces: a correlative microscopy/spectroscopy approach

It is estimated that organic carbon (OC) in soils exceeds the amount of OC in atmosphere and in vegetation pools combined.1 Given the current changes in climate and increasing temperatures in the environment, the fraction of OC sequestered in soils and sediments is more sensitive to decomposition and release as CO 2 in the atmosphere. Evidence implies that sorption and association of dissolved OC with inorganic soil components, i.e., soil minerals, is a key mechanism that contributes to stabilization and retention of OC in soil environment. Studies have shown a direct correlation between sorption of dissolved OC and soil mineral surface properties and their surface area. In addition, properties of organic compounds such as chemical structure and functional groups play a significant role in interaction of dissolved organic species with mineral surfaces. Association of OC with minerals via ligand exchange reactions, polyvalent tertiary bonding, or complexation with metal ions, is found to be preferential and dependent on the organic compounds’ functional groups.

54 ENVIRONMENTAL SCIENCES↗

Deep Learning-Enabled MS/MS Spectrum Prediction Facilitates Automated Identification Of Novel Psychoactive Substances

The market for illicit drugs has been reshaped by the emergence of more than 1100 new psychoactive substances (NPS) over the past decade, posing a major challenge to the forensic and toxicological laboratories tasked with detecting and identifying them. Tandem mass spectrometry (MS/MS) is the primary method used to screen for NPS within seized materials or biological samples. The most contemporary workflows necessitate labor-intensive and expensive MS/MS reference standards, which may not be available for recently emerged NPS on the illicit market. Here, we present NPS-MS, a deep learning method capable of accurately predicting the MS/MS spectra of known and hypothesized NPS from their chemical structures alone. NPS-MS is trained by transfer learning from a generic MS/MS prediction model on a large data set of MS/MS spectra. We show that this approach enables a more accurate identification of NPS from experimentally acquired MS/MS spectra than any existing method. We demonstrate the application of NPS-MS to identify a novel derivative of phencyclidine (PCP) within an unknown powder seized in Denmark without the use of any reference standards. We anticipate that NPS-MS will allow forensic laboratories to identify more rapidly both known and newly emerging NPS. NPS-MS is available as a web server at https://nps-ms.ca/, which provides MS/MS spectra prediction capabilities for given NPS compounds. Additionally, it offers MS/MS spectra identification against a vast database comprising approximately 8.7 million predicted NPS compounds from DarkNPS and 24.5 million predicted ESI-QToF-MS/MS spectra for these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enabling Efficient and Confident Annotation of LC-MS Metabolomics Data through MS1 Spectrum and Time Prediction

Liquid chromatography coupled to electrospray ionization-mass spectrometry (LC–ESI-MS) is a versatile and robust platform for metabolomic analysis. However, while ESI is a soft ionization technique, in-source phenomena including multimerization, nonproton cation adduction, and in-source fragmentation complicate interpretation of MS data. Here, we report chromatographic and mass spectrometric behavior of 904 authentic standards collected under conditions identical to a typical nontargeted profiling experiment. The data illustrate that the often high level of complexity in MS spectra is likely to result in misinterpretation during the annotation phase of the experiment and a large overestimation of the number of compounds detected. However, our analysis of this MS spectral library data indicates that in-source phenomena are not random but depend at least in part on chemical structure. These nonrandom patterns enabled predictions to be made as to which in-source signals are likely to be observed for a given compound. Using the authentic standard spectra as a training set, we modeled the in-source phenomena for all compounds in the Human Metabolome Database to generate a theoretical in-source spectrum and retention time library. A novel spectral similarity matching platform was developed to facilitate efficient spectral searching for nontargeted profiling applications. Taken together, this collection of experimental spectral data, predictive modeling, and informatic tools enables more efficient, reliable, and transparent metabolite annotation.

60 APPLIED LIFE SCIENCES↗

In Situ Evaluation of Calcium Phosphate Nucleation Kinetics and Pathways during Intra- and Extrafibrillar Mineralization of Collagen Matrices

Calcium phosphate (CaP) nanocrystals nucleate and grow in intrafibrillar and/or extrafibrillar spaces of collagen fibrils during the mineralization of bones and teeth. Little is known about the early stages of CaP nucleation and distribution in fibrillar matrices, despite their significant influence on the physical and chemical structures of tissue-level constructs. Using in situ small angle X-ray scattering (SAXS), we examined the nucleation and growth of CaP within collagen matrices and elucidated how a nucleation inhibitor, polyaspartic acid (pAsp), governs mineralization kinetics and pathways at multiple length scales. In situ SAXS analysis clearly revealed that nucleation sites, kinetically-controlled by the nucleation inhibitor, determined the pathways of CaP morphological transformation. Mineralization with pAsp led to intrafibrillar CaP plates with a spatial distribution gradient through the depth of the matrix. Mineralization without pAsp led initially to spherical aggregates of CaP in the entire extrafibrillar spaces. With time, the spherical aggregates transformed into plates at the outermost surface of the collagen matrix, preventing intrafibrillar mineralization inside. The results illuminate mineral nucleation kinetics and real-time nanoparticle distributions within organic matrices in solutions containing body fluid components. Because the macroscale mechanical properties of collagen matrices depend on their mineral content, phase, and arrangement at the nanoscale, this study contributes to better design and fabrication of biomaterials for regenerative medicine.

Kim, Doyoon↗

Highly Emissive Semi-Ladder-Type Copolymers, Aggregation State, and Solution-Processed Organic Light-Emitting Transistor

An organic light-emitting transistor (OLET) integrates the logic function of a field-effect transistor (FET) with electroluminescence of a light-emitting diode (LED) into a single device. This has the potential to play an important role in smart displays, electrically pumped organic laser, and other flexible electronic devices. For achieving high-performance solution-processed OLET, three semiladder copolymers—TPTI-CC, TPTI-C, and TPTI-F—were developed in this study. It was found that variation in the chemical structure lead to significant differences in energy level, emission color, and intermolecular aggregation. High photoluminescence quantum yields (PLQY) was obtained in these three polymers. Solution-processed trilayered OLET devices were fabricated, which exhibited strong electroluminescence, balanced charge mobility, and external quantum efficiency (EQE) of 2.8%.

36 MATERIALS SCIENCE↗

Bridging the Void: Halogen Bonding and Aromatic Interactions to Program Luminescence and Electronic Properties of π -Conjugated Materials in the Solid State

π-Conjugated materials are promising candidates for emerging organic optoelectronic devices empowered by molecular design. The unsolved challenges of predicting and controlling their packing as solids, central to their properties and performance, currently limits their practical application. As noncovalent interactions drive packing, control over such interactions are critical to bridging from chemical structure to functional properties. In molecular crystals, halogen bonding and interactions of aromatic rings have emerged as versatile tools for noncovalent control with tailored luminescence and electronic properties. Here, we describe how the interplay of these directional and tunable interactions can engineer properties, including stimuli-responsive behavior. Specifically, halogen bonding can provide robust designs for directing 2D molecular assembly, whereas the intentional interactions of aromatic rings can yield metastable, switchable packing modes, as well as programmed stacking between layers of chromophores. Examples, herein, demonstrate clear relationships between assembly by design and resulting solid-state properties, and strategies presented offer guidance for future designs of π-conjugated molecular materials using specific aromatic interactions and halogen bonding.

36 MATERIALS SCIENCE↗

Phase Stability, Band Gap Tuning, and Rashba Splitting in Selenium-Alloyed Bournonite: CuPbSb(S 1– x Se x ) 3

Recently, bournonite (CuPbSbS 3 ) has been identified as a potential ferroelectric photovoltaic (PV) material with a 1.3 eV band gap, which falls in an appropriate range for single junction PV devices. Progress in applying bournonite has yielded several studies reporting successful thin-film processing, the most recent of which demonstrated a 2.65% power conversion efficiency for a bournonite-based PV device. In an effort to explore bournonite band gap engineering for PV and other prospective applications (e.g., thermoelectric, spintronic), we here consider the solid-state synthesis of selenium-alloyed bournonite, CuPbSb(S 1-x Se x ) 3 , across the full range of x (0.0 ≤ x ≤ 1.0), and report phase purity for 0.0 ≤ x ≤ 0.5. We characterize the crystal structure and band gap of the samples using X-ray diffraction and diffuse reflectance spectroscopy, determining a band gap decrease for single-phase samples from 1.25 eV at x = 0.0 to 1.06 eV at x = 0.5. Formation energies determined using dispersion corrected hybrid density functional theory (DFT) support experimental findings and are consistent with the stability (instability) of the x = 0.5 (x = 1.0) structure relative to starting materials. The computed band structures show a decreasing trend in the band gap with increasing x, again consistent with experiment, with the states at the conduction (valence) band minima (maxima) being principally derived from Pb (S/Se) states. Spin texture analysis and detailed comparison of spin splitting parameters show that Se-alloying modifies the band gap while maintaining Rashba spin splitting character within the electronic structure. Rashba splitting is most pronounced for the conduction band minimum along the Γ-X path in the Brillouin zone. Energy separation between spin states is maintained at ΔE~0.2 eV for the various Se contents, with σz as the spin direction. Furthermore, a smaller spin splitting occurs along Γ-Z (decreasing value with increasing x), with σ x as the spin direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using Data-Science Approaches to Unravel Insights for Enhanced Transport of Lithium Ions in Single-Ion Conducting Polymer Electrolytes

Solid polymer electrolytes have yet to achieve the desired ionic conductivity (>1 mS/cm) near room temperature required for many applications. This target implies the need to reduce the effective energy barriers for ion transport in polymer electrolytes to around 20 kJ/mol. In this work, we combine information extracted from existing experimental results with theoretical calculations to provide insights into ion transport in single-ion conductors (SICs) with a focus on lithium ion SICs. Through the analysis of temperature-dependent ionic conductivity data obtained from the literature, we evaluate different methods of extracting energy barriers for lithium transport. The traditional Arrhenius fit to the temperature-dependent ionic conductivity data indicates that the Meyer–Neldel rule holds for SICs. However, the values of the fitting parameters remain unphysical. Our modified approach based on recent work (Macromolecules 2023, 56, 15, 6051), which incorporates a fixed pre-exponential factor, reveals that the energy barriers exhibit temperature dependence over a wide range of temperatures. Using this approach, we identify anions leading to the energy barriers <30 kJ/mol, which include trifluoromethane sulfonimide (TFSI), fluoromethane sulfonimide (FSI), and boron-based organic anions. In our efforts to design the next generation of anions, which can exhibit the energy barriers <20 kJ/mol, we have performed density functional theory (DFT) based calculations to connect the chemical structures of boron-based anions via the binding energy of cation (lithium)-anion pairs with the experimentally derived effective energy barriers for ion hopping. Not only have we identified a correlation between the binding energy and the energy barriers, but we also propose a strategy to design new boron-based anions by using the correlation. This combined approach involving experiments and theoretical calculations is capable of facilitating the identification of promising new anions, which can exhibit ionic conductivity >1 mS/cm near room temperature, thereby expediting the development of novel superionic single-ion conducting polymer electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Map of the Zintl AM 2 Pn 2 Compounds: Influence of Chemistry on Stability and Electronic Structure

The AM 2 Pn 2 (A= Ca, Sr, Ba, Yb, Mg; M = Zn, Cd, Mg; and Pn = N, P, As, Sb, Bi) family of Zintl phases has been known as thermoelectric materials and has recently gained much attention for highly promising materials for solar absorbers in single-junction and tandem solar cells. In this paper, we will, from first principles, explore the entire family of AM 2 Pn 2 compounds in terms of their ground-state structure, thermodynamic stability, and electronic structure. We also perform photoluminescence spectroscopy on bulk powder and thin film samples to verify our results, including the first measurements of the band gaps of SrCd 2 P 2 and CaCd 2 P 2 . The AM 2 Pn 2 compounds exhibit broad stability, are mostly isostructural to CaAl 2 Si 2 (P$\overline{3}$m1), and cover a wide range of band gaps from 0 to beyond 3 eV. This could make them useful for a variety of purposes, for which we propose several candidates, such as CaZn 2 N 2 for tandem top cell solar absorbers and SrCd 2 Sb 2 and CaZn 2 Sb 2 for infrared detectors. By examining the band structures of the AM 2 Pn 2 , we find that Mg 3 Sb 2 has the most promise as a thermoelectric material due to several off-Γ valence band pockets, which are unique to it among the compositions studied here.

14 SOLAR ENERGY↗

Facile in Situ Syntheses of Cathode Protective Electrolyte Additives for High Energy Density Li-Ion Cells

Increasing the energy densities of Li-ion batteries necessitates operation of layered lithiated oxide cathodes at potentials exceeding 4 V vs Li/Li + . When continually exposed to such high potentials, these materials gradually deteriorate unless protected by sacrificial agents called electrolyte additives. During the formation cycles, these electrolyte additives decompose on the electrodes forming thin protective layers of insoluble products impeding further deleterious reactions. Some of these electrolyte additives spontaneously react when introduced into the electrolyte to yield specific surface-modifying products that alone protect the cathode; in other words, the nominal additive is the precursor and the secondary product is the protective agent. Guided by this insight, we used molecular engineering to obtain such surface-active secondary products in situ with 100% yield. Two of these electrolyte additives proved exceptional in that they delay both the impedance rise and capacity fade in the Li-ion cells. We demonstrate this protective action and scrutinize the activation of these additives in the electrolyte. As a result, by “taming” spontaneous reactions and regaining full control over the chemical structure, new avenues open to targeted synthesis of electrolyte additives extending the operation of high voltage Li-ion batteries.

25 ENERGY STORAGE↗

Identification of Electrolyte-Soluble Organic Cross-Talk Species in a Lithium-Ion Battery via a Two-Compartment Cell

Electrode cross-talk in lithium-ion batteries has been increasingly recognized in recent years as an explanation for several performance trends during cycling. However, little is known about the nature of such cross-talk species/reactions. In an attempt to further that understanding, we constructed a two-compartment lithium-ion cell using a solid-state lithium-ion conductor as the separator to block the movement of species generated at one electrode to the other. After a long-term hold at a high voltage, the electrolytes extracted from each side were analyzed via high-performance liquid chromatography coupled with electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. We compared these results with those from a coin cell made with a regular porous separator. Extra species were present in the coin cell, which were absent in both compartments of the two-compartment cell, and we identified them as cross-talk species. We propose chemical structures for such species and show that these species likely have carbon carbon double bonds and fluorinated carbons. Finally, we also confirm that the organophosphate-type species proposed by several groups previously are indeed generated at the anode.

25 ENERGY STORAGE↗

Detailed Characterization of Vitrinite-Rich Subbituminous and Bituminous Coals for Utilization in Carbon Fiber Precursor Production

Chemical structures of candidate coals (one subbituminous coal from the Powder River Basin and three bituminous Eastern US coals) were examined for potential low-cost carbon fiber precursor production. Here, the structural evaluation examined the carbon skeleton ( 13 C nuclear magnetic resonance (NMR) and high-resolution transmission electron microscopy (HRTEM)), the heteroatom functionality (X-ray photoelectron spectroscopy (XPS) Fourier transform infrared spectroscopy (FTIR) and NMR), the structural ordering and distribution of PAH sizes (HRTEM), and an estimation of the molecular weight distribution (laser desorption ionization mass spectrometry, LDIMS). The molecular compositional distributions were also evaluated for a mixed solvent extract (atmospheric pressure photoionization, 21 T Fourier transform ion cyclotron resonance mass spectrometry, FT-ICR MS). Significant structural differences existed between the subbituminous and bituminous coals, as expected with coalification (with the bituminous coals having a higher carbon content, lower oxygen content, higher aromaticity values, larger cluster sizes, and so forth). While the bituminous coals were similar in structure (close in rank with Blue Gem being hvAb and the rest being hvBb), structural differences were still evident. Specifically, structural similarities were evident for the average properties of Herrin and Springfield coals: same rank, similar moisture, and volatile matter yields, along with similar aromaticity and carbon and hydrogen content. However, significant structural differences were observed at the molecular level by 21 T FT-ICR MS, which showed that the Springfield coal was structurally more complex. Specifically, 21740, 16931, 30190, and 12982 unique elemental compositions were identified for the Monarch, Herrin, Springfield, and Blue Gem coals, further illustrating the complexity of the coal.

01 COAL, LIGNITE, AND PEAT↗

Thermal Stability of Fractionated Bio-Oil from Fast Pyrolysis

A method was developed to simulate the rapid heating bio-oil fractions will undergo if upgraded using conventional petroleum refining processes. Bio-oil fractions were produced via fluidized bed fast pyrolysis of southern yellow pine sawmill residue. Thermal processing of the bio-oil fractions was evaluated at three temperatures (100, 200, and 300 °C) and two heating times (60 and 120 s). Thermal stability was defined as the increase in average relative molecular weight (RMW) of bio-oil samples after thermal treatment. The effect of moisture content and total acid number (TAN) on thermal stability was also investigated. Changes in chemical structures were observed via Fourier transform infrared spectroscopy (FTIR). Bio-oil fractions exhibited considerable instability at temperatures above 100 °C with substantial increases in average RMW for both 60 and 120 s heating times. Finally, the initial concentration of acids, as measured by TAN and ion chromatography (IC), was found to be the strongest predictor of thermal instability.

09 BIOMASS FUELS↗

Influence of Transition Metal Ion Contaminants on the Performance of Amine-Based Solid Sorbents in Direct Air Capture

Amine-functionalized solid sorbents are a class of sorbent materials proposed for direct air capture (DAC) of CO 2 , yet their long-term performance is susceptible to degradation under realistic operating conditions. Many amines are not thermodynamically stable in air, and amine sorbents oxidize while in use during DAC temperature swing adsorption processes. In this study, we investigate the role of transition metal ion contaminants, specifically Cu 2+ , Fe 2+ , and Ni 2+ , on the oxidative degradation of poly(ethylenimine) (PEI)-impregnated SBA-15 sorbents. By introducing metal ions via different modes mimicking both synthesis-related impurities and impurities derived from environmental exposure, we systematically evaluate sorbent stability after exposure to dry air at an elevated temperature. Thermogravimetric CO 2 uptake measurements reveal that even trace levels of Cu and Fe (as low as ∼4 ppm) can lead to measurable sorbent deactivation after oxidative aging, despite negligible loss in the performance of the control samples. In situ infrared, UV–vis, and X-ray photoelectron spectroscopies indicate that these metals catalyze radical-driven oxidation pathways, altering the chemical structure of the sorbent and accelerating degradation. Our findings underscore the need to account for trace metal contamination during DAC sorbent synthesis and deployment and highlight the importance of environmental contamination pathways.

CO2 capture↗

Artificial Neural Network Based Group Contribution Method for Estimating Cetane and Octane Numbers of Hydrocarbons and Oxygenated Organic Compounds

Chemical pathways for converting biomass into fuels produce compounds for which key physical and chemical property data are unavailable. We developed an artificial neural network based group contribution method for estimating cetane and octane numbers that captures the complex dependence of fuel properties of pure compounds on chemical structure and is statistically superior to current methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zero-Field NMR and Millitesla-SLIC Spectra for >200 Molecules from Density Functional Theory and Spin Dynamics

NMR is usually performed at magnetic fields of 1 T and above to obtain sufficient sensitivity and spectral dispersion to identify chemicals based on chemical shifts and J couplings. At lower fields, the advent of hyperpolarization technologies and sensitive detectors can address sensitivity concerns. However, it remains disputed whether spectral signatures at zero and ultra-low fields are sufficient for chemical identification. Here, we report an all–electron DFT-based batch calculation of J-coupling constants, which are used to generate J coupling NMR spectra at zero field and 6.5 mT for over 200 small molecules. In the developed computational tool chain, we first used the all-electron FHI-aims code to calculate the molecular J couplings and chemical shifts. We then fed the calculated NMR parameters into the NMR simulation package SPINACH to simulate both heteronuclear J coupling spectra at zero-field, and homonuclear J coupling spectra as spin-lock induced crossing (SLIC) spectra at ultra-low field (6.5 mT). The resulting spectra demonstrate that zero and ultra-low field NMR spectra can represent unique identifiers of chemical structure for small molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗