Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Characterizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Characterization of iron-doped lithium niobate for holographic storage applications

A comprehensive characterization of chemical and holographic properties of eight systematically chosen Fe:LiNbO3 crystals is performed in order to determine optimum performance of the crystals in holographic storage and display applications. The discussion covers determination of Fe(2+) and Fe(3+) ion concentrations in Fe:LiNbO3 system from optical absorption and EPR measurements; establishment of the relation between the photorefractive sensitivity of Fe(2+) and Fe(3+) concentrations; study of the spectral dependence, the effect of oxygen annealing, and of other impurities on the photorefractive sensitivity; analysis of the diffraction efficiency curves for different crystals and corresponding sensitivities with the dynamic theory of hologram formation; and determination of the bulk photovoltaic fields as a function of Fe(2+) concentrations. In addition to the absolute Fe(2+) concentration, the relative concentrations of Fe(2+) and Fe(3+) ions are also important in determining the photorefractive sensitivity. There exists an optimal set of crystal characteristics for which the photorefractive sensitivity is most favorable.

Shah, R. R.↗
NASA NTRS1977

Gas-rich minerals in the Allende meteorite - Attempted chemical characterization

A ten-step etching experiment with HNO3 was performed on a chromite-carbon residue from Allende, in order to characterize the HNO3-soluble minor phase 'Q' that contains most of the primordial Ar, Kr, and Xe. Each etch fraction was analyzed by neutron activation analysis for Cr, Fe, Co, Ir, and Au. The results suggest that Q consists of two minerals, each comprising about 5 per cent of the residue. Phase Q1, of Fe/Cr ratio greater than 20, is soluble in cold dilute HNO3 and seems to contain most of the heavy noble gases. It may be an HCl-insoluble sulfide of nominal composition (Fe84Ni12Cr4)Sx. Phase Q2, of Fe/Cr ratio about 0.5 and somewhat enriched in Co, is slowly soluble in hot concentrated HNO3 and seems to be at least an order of magnitude poorer in heavy noble gases than Q1. It may be daubre-elite or an acid-soluble variety of chromite.

Gros, J.↗
NASA NTRS1976

Infrared characterized spacecraft contaminants and related compounds

Infrared spectra (% transmittance plotted vs wavelength/wavenumber) of a large number of lubricant and sealant oils and greases, insulating tapes, and solvents likely to contaminate the internal or external environment of spacecraft are reproduced. Accompanying introductory remarks characterize the nomenclature and properties or uses of the materials whose spectra are reproduced, and offer information on the techniques and equipment used in taking the spectra.

Gross, F. C.↗
NASA NTRS1977

Sea truth and environmental characterization studies of Mobile Bay, Alabama, utilizing ERTS-1, data collection platforms

The paper reports on the scientific results obtained during a feasibility study that evaluated the potential of using ERTS data collection platforms (DCPs) in the coastal environment of Mobile Bay, Alabama. The utility of instrumented buoys operated in a coastal marine environment as ERTS DCPs is demonstrated. It is shown that these platforms are capable of providing both sea-truth data for ERTS imagery studies and time-series data for event monitoring and/or environmental characterization studies.

Schroeder, W. W.↗
NASA NTRS1976

The Apollo 16 drill core - Modal petrology and characterization of the mineral and lithic component

A string of 59 polished thin sections covering the length of the Apollo 16 deep drill core has been examined. A modal analysis, involving the optical classification of 116,000 points was made, and over 500 mineral and lithic fragments from the core were chemically analyzed using an electron microprobe. These data were used to identify and characterize the source areas of the core material and to reconstruct the accumulation history of the core.

Vaniman, D. T.↗
NASA NTRS1976

Characterization of lunar mare basalt types. I - A remote sensing study using reflection spectroscopy of surface soils

Telescopic reflection spectra of mature mare surfaces are used to identify and characterize major basalt types on the frontside of the moon. The spectra are classified according to (1) continuum slope and (2) near-infrared features. This study indicates that there are major lunar basalt types that are unlikely to have been sampled during the landing missions. Regions of basalt exist in the western maria with a TiO2 content comparable to that of Apollo 11 but with infrared characteristics that indicate a distinctly different composition. Samples from two landing sites, Apollo 12 and Luna 16, may contain fragments of a nearby basalt unit compositionally different from the dominant basalt type of the landing area.

Pieters, C.↗
NASA NTRS1977

JAN transistor and diode characterization test program

A statistical summary of electrical characterization was performed on JAN diodes and transistors. Parameters are presented with test conditions, mean, standard deviation, lowest reading, 10% point, 90% point and highest reading.

Takeda, H.↗
NASA NTRS1977

JAN transistor and diode characterization test program, JANTX diode 1N5623

A statistical summary of the electrical characterization of diodes and transistors is presented. Each parameter is presented with test conditions, mean, standard deviation, lowest reading, 10% point (where 10% of all readings are equal to or less than the indicated reading), 90% point (where 90% of all readings are equal to or less than indicated reading) and the highest reading.

Takeda, H.↗
NASA NTRS1977

Characterizations of linear sufficient statistics

A surjective bounded linear operator T from a Banach space X to a Banach space Y must be a sufficient statistic for a dominated family of probability measures defined on the Borel sets of X. These results were applied, so that they characterize linear sufficient statistics for families of the exponential type, including as special cases the Wishart and multivariate normal distributions. The latter result was used to establish precisely which procedures for sampling from a normal population had the property that the sample mean was a sufficient statistic.

Peters, B. C., Jr.↗
NASA NTRS1978

A new experimental method for the accelerated characterization of composite materials

The use of composite materials for a variety of practical structural applications is presented and the need for an accelerated characterization procedure is assessed. A new experimental and analytical method is presented which allows the prediction of long term properties from short term tests. Some preliminary experimental results are presented.

Yeow, Y. T.↗
NASA NTRS1978

Characterization of wear debris generated in accelerated rolling-element fatigue tests

A ferrographic analysis was used to determine the types and quantities of wear debris generated during accelerated rolling contact fatigue tests. The five-ball rolling contact fatigue tester was used. Ball specimens were made of a corrosion resistant, high-temperature bearing steel. The lubricant was a superrefined naphthenic mineral oil. Conditions included a maximum Hertz stress of 5.52 10 to the 9th power Pa and a shaft speed of 10,000 rpm. Four types of wear debris were observed: (1) normal rubbing wear particles, (2) fatigue microspall particles, (3) spheres, and (4) friction polymer deposits. The characterization of wear debris as a function of time was of limited use in predicting fatigue failures in these accelerated tests.

Jones, W. R., Jr.↗
NASA NTRS1977

Effluent characterization from a conical pressurized fluid bed

To obtain useable corrosion and erosion results it was necessary to have data with several levels of particulate matter in the hot gases. One level of particulate loading was as low as possible so that ideally no erosion and only corrosion occurred. A conical fluidized bed was used to obtain some degree of filtration through the top of the bed which would not be highly fluidized. This would minimize the filtration required for the hot gases or conversely the amount of particulate matter in the hot gases after a given level of filtration by cyclones and/or filters. The data obtained during testing characterized the effluent from the bed at different test conditions. A range of bed heights, coal flows, air flows, limestone flows, and pressure are represented. These tests were made to determine the best operating conditions prior to using the bed to determine erosion and corrosion rates of typical turbine blade materials.

Priem, R. J.↗
NASA NTRS1977

JAN transistor and diode characterization test program: JANTX diode 1N759A

The necessary data to create a new class of specifications was the objective of this characterization program. Sample selection was made according to the following criteria: (1) manufacturer or qualified distributor; (2) two vendors; and (3) two date codes. The general guidelines for procurement were two QPL vendors, JAN or JANTX, and two manufacturing lots, 27 from each lot. All data were acquired with three digit accuracy. The data processing and calculation of statistical parameters were performed by the Tektronix computer system using 4 digit display.

Takeda, H.↗
NASA NTRS1978

Characterization of the physico-chemical properties of polymeric materials for aerospace flight

Materials intended for use in spacecraft are routinely tested at low pressures, and outgassed substances are condensed on cold surfaces at liquid nitrogen temperature, -196 C. These condensates are then analyzed by infrared spectroscopy, and gas chromotography-mass spectroscopy. The polymers were tested and allowed to outgas isothermally at 125 C and 0.000001 torr or less. Valuable information was obtained by extending the temperature range below and above 125 C. The performance of substances of interest to NASA were investigated by thermogravimetric analysis (TGA) from room temperature to 450 C or until the substance decomposed. Thermogravimetric analysis of a substance is a useful technique for studying its thermal nature in both static and dynamic thermal environments. It gives considerable insight into the stability and characterization of substances and the changes they undergo in varying thermal environments. The system is able to get pressures down to 1 micron or 0.001 torr.

Rock, M.↗
NASA NTRS1977

Communications Link Characterization Experiment (CLCE)

Results of the data which were acquired, reduced, and analyzed from the Communications Link Characterization Experiment (CLCE) while utilizing the CTS satellite are presented. The test data obtained from the stations consisted of the results of various TV tests, attenuation and rain rate data. An additional meteorological parameter was measured and it consists of the back scatter returns of the multifrequency weather radar.

Source record↗
NASA NTRS1977

Effects of radiation upon the light-sensing elements of the retina as characterized by scanning electron microscopy

A model system using Necturus maculosus, the common mudpuppy, was established for evaluating effects of radiation upon the light-sensing elements of the retina. Accelerated heavy ions of helium and neon from the Berkeley Bevalac were used. A number of criteria were chosen to characterize radiation damage by observing morphological changes with the scanning electron microscope. The studies indicated retina sensitivity to high-LET (neon) particles at radiation levels below 10 rads (7 particles per visual element) whereas no significant effects were seen from fast helium ions below 50 rads.

Malachowski, M. J.↗
NASA NTRS1977

Effluent characterization from a conical pressurized fluid bed

An important factor regarding the use of a pressurized coal burning fluidized bed (PFB) providing gases for driving a gas turbine is the turbine blade lifetime. However, very little data are currently available to predict erosion and corrosion rates produced by the effluent from a PFB. To assess the potential of alloys developed for aeronautical applications to resist this environment it was decided to build a coal burning fluidized bed that could be employed to measure erosion and corrosion rates. Tests were conducted with a conical fluidized bed to obtain some degree of filtration through the top of the bed. A description is presented of the data obtained in the first 138 hours of testing to characterize the effluent from the bed under different test conditions. The considered tests had been made to determine the best operating conditions prior to using the bed for a determination of the erosion and corrosion rates of typical turbine blade materials.

Priem, R. J.↗