Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Enhanced Room-Temperature Ferromagnetism Observed in SiO{sub 2}-Coated CuO Nanostructures

In this paper, the magnetic properties of pure CuO and SiO{sub 2}-coated CuO nanocrystals were reported. Strongly enhanced room-temperature ferromagnetism was observed in SiO{sub 2}-coated CuO nanocrystals, whose saturation magnetization is two orders of magnitude enhanced compared to that of the uncoated CuO nanocrystals. The mechanism of this enhancement was investigated. It points out the main origin of ferromagnetism in these CuO nanocrystals is the uncompensated surface state, so that the coating of SiO{sub 2} can effectively protect the surface state to improve the ferromagnetism in these CuO nanocrystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties and Critical Current of Superconducting Nanocomposites (1 −x)YBa{sub 2}Cu{sub 3}O{sub 7−δ} + xCuO

The aim of this paper was to study the effect of nanoscale inclusions of CuO as the second ingredient of composites on transport properties of superconducting YBa{sub 2}Cu{sub 3}O{sub 7} polycrystals. The samples of YBa{sub 2}Cu{sub 3}O{sub 7−δ} with different content of CuO nanoparticles were synthesized. The analysis of the magnetic properties was carried out within the extended critical state model. It was found that the addition of 0.5 and 1% of CuO nanoparticles leads to an increase in the intragranular density of the critical current at T= 4.2 K. A further increase of x from 2 to 15% and more than 40% decreases the critical current density. The critical current density higher than in the reference sample was also found in the samples with x= 20% and x= 24%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on Physical Properties of Sn-Modified Cubic Cu{sub 2}O Nanostructures

Cubic Cu{sub 2−x} Sn{sub x}O (0 ≤ x ≤ 0.4) nanostructures have been developed with the solvothermal method. X-ray diffraction data analysis confirms the formation of a pristine Cu{sub 2}O phase below x=0.3 Sn{sup 2+} substitution, and SnO-related phases appear in 0.3 substitute sample indicating phase segregation starts at x≥0.3. The magnetization versus applied field (M − H) curves have been determined using a vibrating sample magnetometer at 300 K which reveals that ferromagnetic behavior of synthesized nanomaterials is reliant on the substituent concentration and enhanced gradually with its addition in the material. Photoluminescence spectra show that ferromagnetism originates from the induced magnetic moment in defects created as cation vacancies in the host material. Beside these, the dielectric measurements were performed at various frequencies (20 Hz–1 MHz) and in the temperature range of 100 to 350 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase Diagrams of a 2D Dilute Antiferromagnetic Ising Model with Charged Impurities

In this work, we address a topical problem of a competition of charge and spin ordering for high-T cuprates. We have studied a simplified static 2D spin-pseudospin model on a square lattice, which takes into account both conventional antiferromagnetic spin exchange coupling and the on-site and intersite charge correlations in the CuO{sub 2} planes with the on-site Hilbert space reduced to only three effective valent states. We compared an analytical results for the ground state and for the temperature phase diagrams obtained in a mean field approximation and a large amount of the classical Monte Carlo calculations. Numerical results show that homogeneous ground state antiferromagnetic solutions found in a mean field approximation are unstable for the “strong” exchange limit with respect to phase separation with the charge and spin subsystems behaving like immiscible quantum liquids. We found an analytical expression for critical temperature of phase separation and performed the comparison with the Monte Carlo results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological Structures in Unconventional Scenario for 2D Cuprates

Numerous experimental data point to cuprates as d-d charge transfer unstable systems whose description implies the inclusion of the three many-electron valence states CuO{sub 4}{sup 7−,6−,5−} (nominally Cu{sup 1+,2+,3+}) on an equal footing as a well-defined charge triplet. We introduce a minimal model to describe the charge degree of freedom in cuprates with the on-site Hilbert space reduced to only the three states and make use of the S = 1 pseudospin formalism. The formalism constitutes a powerful method to study complex phenomena in interacting quantum systems characterized by the coexistence and competition of various ordered states. Overall, such a framework provides a simple and systematic methodology to predict and discover new kinds of orders. In particular, the pseudospin formalism provides the most effective way to describe different topological structures, in particular, due to a possibility of a geometrical two-vector description of the on-site states. We introduce and analyze effective pseudospin Hamiltonian with on-site and inter-site charge correlations, two types of a correlated one-particle transfer and two-particle, or the composite boson transfer. The latter is of a principal importance for the HTSC perspectives. The 2D S = 1 pseudospin system is prone to a creation of different topological structures, which form topologically protected inhomogeneous distributions of the eight local S = 1 pseudospin order parameters. We present a short overview of localized topological structures, typical for S = 1 (pseudo)spin systems, focusing on unexpected antiphase domain walls in parent cuprates and so-called quadrupole skyrmion, which are believed to be candidates for a topological charge excitation in parent or underdoped cuprates. Puzzlingly, these unconventional structures can be characterized by an uniform distribution of the mean on-site charge, that makes these invisible for X-rays. Quasi-classical approximation and computer simulation are applied to analyze localized topological defects and evolution of the domain structures in “negative-U” model under charge order-superfluid phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Cesium Substitution on the Superconducting Properties of Bi-2212 Samples Prepared Via Solid-State Reaction and Laser Floating Zone Technique

In this work, the effect of cesium substitution on the structural and superconducting properties of Bi{sub 2}Sr{sub 2}Ca{sub 1-x}Cs{sub x}Cu{sub 2}O{sub +y} (where x = 0.0, 0.025, 0.050, 0.075, 0.10, 0.125, and 0.15) samples prepared by the solid-state reaction route and by directional growth using the laser floating zone (LFZ) technique has been studied. X-ray diffraction has shown that both kinds of samples present the 2212 phase as the major one, with pseudo tetragonal structure, accompanied by minor amounts of (Sr,Ca)CuO{sub 2} and Bi{sub 2}(Sr,Ca){sub 4}O{sub 6 + d} secondary phases. SEM-EDX results indicate that Bi-2212 phase is the major one, with small amounts of secondary phases. Cs substitution diminishes the size and content of secondary phases. Magnetization measurements reflect different behavior for sintered and LFZ grown samples. Although the diamagnetic transition is very wide for the former samples, it is very sharp for the last ones. The critical onset temperatures, T{sub C}, are around 80 and 90 K, for sintered and LFZ grown samples, respectively. Moreover, M–H measurements indicate that LFZ grown samples exhibit larger areas than the sintered ones. The intragranular critical current, J{sub C}, calculated from the M–H loops and Bean’s formula, is maximum for x = 0.025Cs sintered and x = 0.05Cs LFZ grown samples. The maximum pinning forces, F{sub Pmax}, determined in these samples are higher than those obtained in undoped ones, reaching 9 × 10{sup 7} Oe*A/cm{sup 2} and 10 × 10{sup 8} Oe*A/cm{sup 2}, at 10 K, for sintered and LFZ grown samples, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phenomenology of {sup 63}Cu Nuclear Relaxation in Cuprate Superconductors

Nuclear relaxation is an important thermodynamic probe of electronic excitations, in particular in conducting and superconducting systems. Here, an empirical phenomenology based on all available literature data for planar Cu in hole-doped cuprates is developed. It is found that most of the seemingly different relaxation rates among the systems are due to a temperature-independent anisotropy that affects mostly measured 1/T{sub 1∥}, the rate with an external magnetic field along the crystal c-axis, while 1/T{sub 1⊥} is largely independent on doping and material above the critical temperature of superconductivity (T{sub c}). This includes very strongly overdoped systems that show Fermi liquid behavior and obey the Korringa law. Below T{sub c}, the relaxation rates are similar, as well, if plotted against the reduced temperature T/T{sub c}. Thus, planar Cu nuclear relaxation is governed by a simple, dominant mechanism that couples the nuclei with varying anisotropy to a rather ubiquitous bath of electronic excitations that appear Fermi liquid-like irrespective of doping and family. In particular, there is no significant enhancement of the relaxation due to electronic spin fluctuations, different from earlier conclusions. Only the La{sub 2−x}Sr{sub x}CuO{sub 4} family appears to be an outlier as additional relaxation is present; however, the anisotropy remains temperature independent. Also systems with very low doping levels, for which there is a lack of data, may behave differently.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient SnO{sub 2}/CuO/porous silicon nanocomposites structure for NH{sub 3} gas sensing by incorporating CuO nanoparticles

In this paper, a porous silicon (Psi) surface modification process, including the incorporating of pure and CuO mixed SnO{sub 2} within a Psi layer, was investigated. A Psi layer with a pore-like structure prepared via laser-assisted etching process with a laser illumination intensity of (40) mW/cm{sup 2} was employed as a substrate for materialization SnO{sub 2}/CuO/Psi nanocomposites for gas sensing application. Pure SnO{sub 2} and SnO{sub 2}:CuO nanoparticles were synthesized via a chemical spray pyrolysis process on the Psi surface at 350 °C. The materialization of SnO{sub 2}:CuO/Psi nanocomposites were recognized through Field-Emission Scanning Electron Microscopy, X-ray Diffraction, Atomic Force Microscopy, and Energy-dispersive X-ray Analysis. The results displayed that the morphological properties of SnO{sub 2}:CuO nanoparticles were definitely controlled by varying the CuO contents. Different shapes (nearly cubic shape and spherical shape) with various sizes of SnO{sub 2} and SnO{sub 2}:CuO within the Psi surface were achieved by increasing the CuO content. SnO{sub 2}:CuO/Psi nanocomposites, plans, grain size, average surface roughness, homogeneity and specific surface area of SnO{sub 2}:CuO nanoparticles were considerably influenced by CuO content. The lower grain size and higher average surface roughness and specific surface area were attained when the percentage of CuO was about 30% within the structure of 70% SnO{sub 2}:30% CuO, and the performance of the NH{sub 3} gas sensor revealed a short response time with a high sensitivity of (88%).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure and Properties of Nanoparticles Fabricated by Laser Ablation of Bulk Metal Copper Targets in Water and Ethanol

Colloidal solutions of nanoparticles (NPs) are prepared by nanosecond pulsed laser ablation (upon exposure to Nd:YAG laser radiation at a wavelength of 1064 nm with a pulse duration of 7 ns) of a copper target in water and ethyl alcohol. Their composition, structure, and optical properties are investigated. It is shown that monovalent Cu{sub 2}O NPs are mainly formed in water, whereas metal Cu NPs are mainly formed in ethanol. The nonlinear transmission of colloids at wavelengths of 532 and 1064 nm is investigated. It is established that they effectively limit the nanosecond laser pulse power at a wavelength of 532 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of pH on Corrosion Performance of Cu-Se and Cu-Se-Te Alloys in 3.5% Sodium Chloride Solution

The influence of pH (2, 7, 12) on the corrosion behavior of Cu-Se-Te and Cu-Se alloys in a 3.5% sodium chloride solution was investigated using static immersion testing and electrochemical methods. The morphologies of the alloys after corrosion were observed by scanning electron microscopy. The distribution of elements was detected by energy-dispersive spectrometry, and the phases were identified by x-ray diffraction. The results indicate that the corrosion rate decreases significantly with an increase in pH. No compact protective film forms on the alloy surface when pH is 2; meanwhile, Cu{sub 2}(OH){sub 3}Cl and Cu{sub 2}O films form on the alloy surface when pH is 7 or 12. The corrosion rates of alloys in the NaCl solution with different pH levels vary because the cathode reaction and the protective films affect the corrosion rate synthetically. In addition, the Cu-0.5Se alloy generally exhibits satisfactory conductivity, strength, and corrosion resistance. The corrosion resistance of the Cu-0.5Se alloy is higher than that of the Cu-Se-Te alloys, particularly at low pH levels.

36 MATERIALS SCIENCE↗

Effect of MgCl{sub 2} on the Corrosion Behavior of Copper Under Periodic Wet/Dry Cycle Condition

The corrosion behaviors of copper under periodic wet/dry cycle conditions were investigated. The characteristics of the corrosion product formed on copper were analyzed by x-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, and in situ electrochemical impedance spectroscopy. Weight loss results showed that the corrosion of copper under an MgCl{sub 2} deposition condition was more severe than that under NaCl. The main corrosion products formed on the tested sample under NaCl deposition condition consisted of Cu{sub 2}Cl(OH){sub 3} and Cu{sub 2}O, while those under the MgCl{sub 2} deposition condition consisted of Cu{sub 2}Cl(OH){sub 3} and Mg{sub 2}(OH){sub 3}Cl·4H{sub 2}O. In the case of the NaCl deposition condition, a two-layered structure formed during the corrosion process. However, the corrosion product layer formed on copper under the MgCl{sub 2} deposition condition had an extremely loose structure. The effect of MgCl{sub 2} on the corrosion mechanism of copper is discussed.

36 MATERIALS SCIENCE↗

Electrosynthesis of high purity ethylene using high-index facet Cu 2 O nanocrystals electrocatalyst

Electrochemical CO 2 reduction reaction (eCO2RR) to multi-carbon (C 2+ ) products with copper-based catalysts is often limited by poor selectivity. This challenge arises from the concurrent formation of various intermediates, dictated by the atomic arrangement and electronic properties of surface atoms. In this study, we found that copper (I) oxide (Cu 2 O) nanocrystals with 50 facets (50F-NC), predominantly featuring (211) facets that offers high density of under-coordinated sites, demonstrate superior ethylene (C 2 H 4 ) selectivity of 92% ± 2 with an overall current density of 212 mA/cm 2 at -650 mV vs RHE. Furthermore, after one month of storage in a 1 M KOH electrolyte, this catalyst demonstrated a C 2 H 4 Faradaic efficiency of 87% highlighting its stabile structure under strong alkaline environments. Here, operando electrochemical Raman spectroscopy revealed enhanced CO* intermediate coverage on the 50F-NC catalyst, correlating with improved C-C coupling. SEM, TEM, and XPS analyses, along with DFT calculations, suggested that Cu sites on the (211) facet of 50F-NC and those at the Cu/Cu 2 O interface formed in-situ due to the surface reconstruction during the reaction, are likely active sites for effective C-C coupling and sustained high-rate C 2 H 4 production.

Cu nano particle↗

Operation characteristics of cylindrical miniature grooved heat pipe using aqueous CuO nanofluids

An experimental study was performed to investigate the operation characteristics of a cylindrical miniature grooved heat pipe using aqueous CuO nanofluid as the working fluid at some steady cooling conditions. The experiments were carried out under both the steady operation process and the unsteady startup process. The experiment results show that substituting the nanofluid for water as the working fluid can apparently improve the thermal performance of the heat pipe for steady operation. The total heat resistance and the maximum heat removal capacity of the heat pipe using nanofluids can maximally reduce by 50% and increase by 40% compared with that of the heat pipe using water, respectively. For unsteady startup process, substituting the nanofluid for water as the working fluid, cannot only improve the thermal performance, but also reduce significantly the startup time. (author)

42 ENGINEERING↗

PreDSLpmo: A neural network-based prediction tool for functional annotation of lytic polysaccharide monooxygenases

Lytic polysaccharide monooxygenases (LPMOs), a family of copper-dependent oxidative enzymes, boost the degradation of polysaccharides such as cellulose, chitin, and others. While experimental methods are used to validate LPMO function, a computational method that can aid experimental methods and provide fast and accurate classification of sequences into LPMOs and its families would be an important step towards understanding the breadth of contributions these enzymes make in deconstruction of recalcitrant polysaccharides. In this study, we developed a machine learning-based tool called PreDSLpmo that employs two different approaches to functionally classify protein sequences into the major LPMO families (AA9 and AA10). The first approach uses a traditional neural network or multilayer percerptron-based approach, while the second employs bi-directional long short-term memory for sequence classification. Finally, our method shows improvement in predictive power when compared with dbCAN2, an existing HMM-profile-based CAZyme predicting tool, on both validation and independent benchmark set.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of CeO2-Supported Cu-Pd Bimetallic Catalyst for the Oxygen-Assisted Water-Gas Shift Reaction

This study was focused to investigate the roles of Cu and Pd in CuPd/CeO2 bimetallic catalysts containing 20-30 wt% Cu and 0.5-1 wt% Pd used in the oxygen-assisted water-gas shift (OWGS) reaction employing a combined bulk and surface characterization techniques such as XRD, TPR, CO chemisorption, and in-situ XPS. The catalytic activity for CO conversion and the stability of catalyst during on-stream operation increased by the addition of Cu to Pd/CeO2 or Pd to Cu/CeO2 monometallic catalysts, especially when the OWGS reaction was performed under low temperatures, below 200oC. The bimetallic catalyst after leaching with nitric acid retained about 60% of its original activity. The TPR of monometallic Cu/CeO2 showed reduction of CuO supported on CeO2 in two distinct regions, around 150 and 250oC. The high temperature peak disappeared and reduction occurred in a single step around 150oC upon Pd addition. The Pd dispersion decreased from 38.5% for Pd/CeO2 to below 1% for CuPd/CeO2 bimetallic catalyst. In-situ XPS studies showed a shift in Cu 2p peaks toward lower binding energy (BE) with concommitant shift in the Pd 3d peaks toward higher BE. Addition of Pd decreased the surface Cu concentration while the concentration of Pd remained unaltered. All these observations indicated the formation of Cu-Pd surface alloy. The valence band XP spectra collected below 10 eV corroborated the core level XP spectra and indicated that Cu is mainly involved in the catalytic reaction. The improved catalytic activity and stability of CuPd/CeO2 bimetallic catalyst was attributed to the alloy formation.

01 COAL, LIGNITE, AND PEAT↗

Comprehensive Study of High-Tc Interface Superconductivity

Using ALL-MBE technique, we have synthesized different heterostructures consisting of an insulator La{sub 2}CuO{sub 4} (I) and a metal La{sub 1.56}Sr{sub 0.44}CuO{sub 4} (M) layer neither of which is superconducting by itself. The M-I bilayers were superconducting with a critical temperature T{sub c} {approx} 30-36 K. This highly robust phenomenon is confined within 1-2 nm from the interface and is primarily caused by the redistribution of doped holes across the interface. In this paper, we present a comprehensive study of the interface superconductivity by a range of experimental techniques including transport measurements of superconducting properties.

36 MATERIALS SCIENCE↗

Phase equilibria and crystal chemistry of the R-Cu-Ti-O systems (R=lanthanides and Y)

As part of the study of interaction of the Ba{sub 2}RCu{sub 3}O{sub 6+z} (R=lanthanides and Y) superconductor with SrTiO{sub 3} buffer, phase equilibria of the subsystem, R{sub 2}O{sub 3}-TiO{sub 2}-CuO (R=Nd, Y, and Yb), have been investigated in air at 960 deg. C. While the phase relationships of the two phase diagrams with smaller R (Y and Yb) are similar, substantial differences were found in the Nd{sub 2}O{sub 3}-TiO{sub 2}-CuO system, partly due to different phase formation in the binary R{sub 2}O{sub 3}-TiO{sub 2} and R{sub 2}O{sub 3}-CuO systems. R{sub 2}CuTiO{sub 6} and R{sub 2}Cu{sub 9}Ti{sub 12}O{sub 36} were the only ternary phases established in all the three diagrams. R{sub 2}Cu{sub 9}Ti{sub 12}O{sub 36} belongs to the perovskite-related [AC{sub 3}](B{sub 4})O{sub 12} family which is cubic Im3. Depending on the size of R{sup 3+}, R{sub 2}CuTiO{sub 6} crystallizes in two crystal systems: Pnma (R=La-Gd), and P6{sub 3}cm (R=Dy-Lu). The structure and crystal chemistry of the Pnma series of R{sub 2}CuTiO{sub 6} (R=La, Nd, Sm, Eu, and Gd) are discussed in detail in this paper. Patterns for selected members of R{sub 2}CuTiO{sub 6} have also been prepared and submitted for inclusion in the Powder Diffraction File (PDF). - Graphical abstract: Phase diagram of the Y{sub 2}O{sub 3}-CuO-TiO{sub 2} system prepared in air at 960 deg. C

36 MATERIALS SCIENCE↗

CTAB-assisted synthesis and photocatalytic property of CuO hollow microspheres

CuO hollow microspheres have been fabricated through a simple hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). The products were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The effects of reaction temperature, surfactant, and the molar ratio of Urea/Cu(PI) on the morphologies of the resulting products were investigated. The possible formation mechanism of CuO hollow dandelion-like architectures was proposed. The hierarchical CuO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B (RhB) under UV-light illumination. - Graphical abstract: Dandelion-like CuO hollow microspheres were fabricated through a hydrothermal method. The prepared products exhibited a high photocatalytic activity for the photocatalytic decolorization of Rhodamine B aqueous solution under UV-light illumination.

36 MATERIALS SCIENCE↗