Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Deuteration Can Impact Micellization Pressure and Cloud Pressure of Polystyrene-block-polybutadiene and Polystyrene-block-polyisoprene in Compressible Propane

The deuterated homopolymers and their corresponding polystyrene-block-polybutadiene and polystyrene-block-polyisoprene copolymers require lower cloud pressures than their hydrogenous analogues to dissolve in a compressible alkane solvent, such as propane. For symmetric diblocks, deuteration reduces the micellization pressure. By contrast, for asymmetric diblocks with a long diene block relative to the styrene block, deuteration can increase the micellization pressure. All in all, however, the deuteration effects, while measurable, do not qualitatively change the principal diblock properties in compressible propane solutions, such as pressure-induced micelle decomposition, micelle formation and micelle size, and their temperature dependence. Therefore, isotope labeling should be a useful approach to neutron-scattering characterization for styrene-diene block copolymers in compressible alkane systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relativistic laser pulse focusing and self-compression in stratified plasma-vacuum systems

Laser pulse compression in plasma-vacuum systems is investigated in the weakly relativistic regime. First, within one-dimensional hydrodynamic models, the basic features of propagation in plasmas, like width and amplitude changes, are demonstrated. The numerical findings can be interpreted, in part, a by simplified model based on the variation of action method. Since transverse effects like filamentation do play a significant role, the numerical evaluations are then generalized to two-dimensional situations. An approximate analytical criterion for the dominating transverse wave number during laser propagation in plasmas is presented. Finite plasma-vacuum systems show in addition to the filamentation instability the so-called plasma lens effect. The latter is first demonstrated for a single plasma layer. It is then discussed how (i) longitudinal and transversal self-compression in plasmas, (ii) focusing by a plasma layer, and (iii) cleaning of unstable modes compete with each other in layered plasma-vacuum systems. Depending on the available parameters, optimized plasma-vacuum systems are proposed for pulse compression. Such systems can be used as a substitute for hollow fibers which are in use to shorten a pulse. Pulse lengths of one or two cycles can be reached by optimized plasma-vacuum systems, while attaining ultrarelativistic intensities in the focal spot behind the system of layers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of compressibility on the Rayleigh-Taylor and Richtmyer-Meshkov instability induced nonlinear structure at two fluid interface

The effect of compressibility and of density variation on Rayleigh-Taylor and Richtmyer-Meshkov instability of the temporal development of two fluid interfacial structures such as bubbles and spikes have been investigated. It is seen that the velocity of the tip of the bubble or spike increases (destabilization) if the local Atwood number increases due to density variation of either of the fluids. The opposite is the result, i.e., the bubble or spike tip velocity decreases (stabilization) if the density variation leads to lowering of the value of the local Atwood number. The magnitude of stabilization or destabilization is an increasing function of the product of the wave number k and interfacial pressure p{sub 0}. The effect of compressibility is quite varied. If the heavier (upper) fluid alone is incompressible ({gamma}{sub h}{yields}{infinity}), but the lighter fluid is compressible the growth rate is higher (destabilization) than when both the fluids are incompressible. Moreover the heavier fluid remaining incompressible the growth rate decreases (stabilization) as {gamma}{sub l} (finite) increases and ultimately tends to the incompressible limit value as {gamma}{sub l}{yields}{infinity}. With {gamma}{sub l}{yields}{infinity} but {gamma}{sub h} finite the growth increases (destabilization) as {gamma}{sub h} increases. When both {gamma}{sub h} and {gamma}{sub l} are finite (density {rho}{sub h}>density {rho}{sub l}) the growth is reduced when {gamma}{sub h}<{gamma}{sub l} compared to that when both fluids are incompressible and enhanced when {gamma}{sub h}>{gamma}{sub l}. The set of nonlinear equations describing the dynamics of bubbles and spikes in the presence of fluid density variations are not analytically integrable in closed form. The results derived by numerical solution methods are represented and interpreted in corresponding figures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear longitudinal compression of short laser pulses in the atmosphere

Propagation of short and intense laser beams in the atmosphere is considered for the purpose of identifying the temporal compression. The conditions and validity of linear and nonlinear compression theories are discussed. The effects of chirping and pulse power in the preionization regime are deliberated. The fact that the linear theory cannot explain the pulse compression in the atmosphere is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real time synchrotron x-ray diffraction measurements to determine material strength of shocked single crystals following compression and release

We present a method to use real time, synchrotron x-ray diffraction measurements to determine the strength of shocked single crystals following compression and release during uniaxial strain loading. Aluminum and copper single crystals shocked along [111] were examined to peak stresses ranging from 2 to 6 GPa. Synchrotron x rays were used to probe the longitudinal lattice strains near the rear free surface (16 and 5 {micro}m depths for Al and Cu, respectively) of the metal crystals following shock compression and release. The 111 diffraction peaks showed broadening indicating a heterogeneous microstructure in the released state. The diffraction peaks also shifted to lower Bragg angles relative to the ambient Bragg angle; the magnitude of the shift increased with increasing impact stress. The Bragg angle shifts and appropriate averaging procedures were used to determine the macroscopic or continuum strength following compression and release. For both crystals, the strengths upon release increased with increasing impact stress and provide a quantitative measure of the strain hardening that occurs in Al(111) and Cu(111) during the shock and release process. Our results for Al(111) are in reasonable agreement with a previous determination based solely on continuum measurements. Two points are noteworthy about the developments presented here: Synchrotron x rays are needed because they provide the resolution required for analyzing the data in the released state; the method presented here can be extended to the shocked state but will require additional measurements.

36 MATERIALS SCIENCE↗

LASER COMPRESSION OF NANOCRYSTALLINE METALS

Shock compression in nanocrystalline nickel is simulated over a range of pressures (10-80 GPa) and compared with experimental results. Laser compression carried out at Omega and Janus yields new information on the deformation mechanisms of nanocrystalline Ni. Although conventional deformation does not produce hardening, the extreme regime imparted by laser compression generates an increase in hardness, attributed to the residual dislocations observed in the structure by TEM. An analytical model is applied to predict the critical pressure for the onset of twinning in nanocrystalline nickel. The slip-twinning transition pressure is shifted from 20 GPa, for polycrystalline Ni, to 80 GPa, for Ni with g. s. of 10 nm. Contributions to the net strain from the different mechanisms of plastic deformation (partials, perfect dislocations, twinning, and grain boundary shear) were quantified in the nanocrystalline samples through MD calculations. The effect of release, a phenomenon often neglected in MD simulations, on dislocation behavior was established. A large fraction of the dislocations generated at the front are annihilated.

36 MATERIALS SCIENCE↗

X-ray Raman compression via two-stream instability in dense plasmas

A Raman compression scheme suitable for x-rays, where the Langmuir wave is created by an intense beam rather than the ponderomotive potential between the seed and pump pulses, is proposed. The required intensity of the seed and pump pulses enabling the compression could be mitigated by more than a factor of 100 compared to conventionally available other Raman compression schemes. The relevant wavelength of x-rays ranges from 1 to 10 nm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of nonlinear waves in compressing plasma

Through particle-in-cell simulations, the evolution of nonlinear plasma waves is examined in one-dimensional collisionless plasma undergoing mechanical compression. Unlike linear waves, whose wavelength decreases proportionally to the system length L(t), nonlinear waves, such as solitary electron holes, conserve their characteristic size {Delta} during slow compression. This leads to a substantially stronger adiabatic amplification as well as rapid collisionless damping when L approaches {Delta}. On the other hand, cessation of compression halts the wave evolution, yielding a stable mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compressibility Anomaly in Magnetic Heuslar Alloy Ni{sub 2}MnGa and Co{sub 2}FeSi

Results of synchrotron based high pressure x ray diffraction measurements on Heuslar alloys Ni{sub 2}MnGa and Co{sub 2}FeSi are reported up to 30.6 and 24.6 GPa respectively. Pressure volume data for Ni{sub 2}MnGa shows normal compressibility behaviour up to 30.6 GPa with the value of bulk modulus Bo and its pressure derivative B' as 130 GPa and 4.97 respectively. In case of Co{sub 2}FeSi, the P-V data shows normal behaviour upto 5 Gpa and hereafter linear P-V relation. The estimated ambient pressure compressibility based on data up to 5 GPa is 267 GPa (with B' = 4). The fit to linear P-V data above 5 GPa yields a compressibility of 279.5.

36 MATERIALS SCIENCE↗

Self-diffusion in compressively strained Ge

Under a compressive biaxial strain of {approx} 0.71%, Ge self-diffusion has been measured using an isotopically controlled Ge single-crystal layer grown on a relaxed Si{sub 0.2}Ge{sub 0.8} virtual substrate. The self-diffusivity is enhanced by the compressive strain and its behavior is fully consistent with a theoretical prediction of a generalized activation volume model of a simple vacancy mediated diffusion, reported by Aziz et al.[Phys. Rev. B 73, 054101 (2006)]. The activation volume of (-0.65{+-}0.21) times the Ge atomic volume quantitatively describes the observed enhancement due to the compressive biaxial strain very well.

36 MATERIALS SCIENCE↗

Shock compression of precompressed deuterium

Here we report quasi-isentropic dynamic compression and thermodynamic characterization of solid, precompressed deuterium over an ultrafast time scale (< 100 ps) and a microscopic length scale (< 1 {micro}m). We further report a fast transition in shock wave compressed solid deuterium that is consistent with the ramp to shock transition, with a time scale of less than 10 ps. These results suggest that high-density dynamic compression of hydrogen may be possible on microscopic length scales.

36 MATERIALS SCIENCE↗

The role of compressibility in energy release by magnetic reconnection

Using resistive compressible magnetohydrodynamics, we investigate the energy release and transfer by magnetic reconnection in finite (closed or periodic) systems. The emphasis is on the magnitude of energy released and transferred to plasma heating in configurations that range from highly compressible to incompressible, based on the magnitude of the background {beta} (ratio of plasma pressure over magnetic pressure) and of a guide field in two-dimensional reconnection. As expected, the system becomes more incompressible, and the role of compressional heating diminishes, with increasing {beta} or increasing guide field. Nevertheless, compressional heating may dominate over Joule heating for values of the guide field of 2 or 3 (in relation to the reconnecting magnetic field component) and {beta} of 5-10. This result stems from the strong localization of the dissipation near the reconnection site, which is modeled based on particle simulation results. Imposing uniform resistivity, corresponding to a Lundquist number of 10{sup 3} to 10{sup 4}, leads to significantly larger Ohmic heating. Increasing incompressibility greatly reduces the magnetic flux transfer and the amount of energy released, from {approx}10% of the energy associated with the reconnecting field component, for zero guide field and low {beta}, to {approx}0.2%-0.4% for large values of the guide field B{sub y0}>5 or large {beta}. The results demonstrate the importance of taking into account plasma compressibility and localization of dissipation in investigations of heating by turbulent reconnection, possibly relevant for solar wind or coronal heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An ab initio study on compressibility of Al-containing MAX-phase carbides

The compressibility of Al-containing MAX carbides was investigated in details using first-principle calculations based on density functional theory. The bond stiffness and bond angle as a function of pressure were examined. The M-Al bond stiffness is about 1/3–1/2 of M-C bond stiffness. The M-C bond close to Al atoms has the highest bond stiffness in M{sub 3}AlC{sub 2} and M{sub 4}AlC{sub 3} phases, with the similar bond stiffness of the other two bonds in the latter. Generally, the bond stiffness of the strongest M-C bond increases with increasing VEC (Valence Electron Concentration), which also affects the bond stiffness of other bonds. Of most importance, the bulk moduli are 0.256 of the mean bond stiffness for three series. With increasing pressure, M-Al bond angle increases, but M-C bond angles decreases, which indicates that M-Al and M-C bonds shift towards basal plane and along c-axis, respectively. As a result, the compressibility becomes more difficult along c-axis than a-axis. Some abnormal phenomena in the compressibility of Al-containing M{sub n+1}AlX{sub n} phases with VEC = 6 are attributed to the thermodynamical instability of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The ITER pre-compression rings – A first in cryogenic composite technology

The ITER Pre-Compression Rings represent one of the heaviest composite structures ever manufactured as a single piece and the largest - the outer diameter will be above 5.5 meters - intended for use in a cryogenic environment. With a cross section of 337 mm × 288 mm, each item will weigh more than 3,000 kg. A development program, based on filament wound and dry wound S2 glass unidirectional fibers, the latter processed by VARTM, was completed on one fifth scale rings, and these materials and techniques were shown to be satisfactory. The paper describes how a technology applied to build up primary structures of European launchers is being accommodated to produce the ITER Pre-Compression Rings, fulfilling its extremely challenging requirements. In addition, we will describe how the structural analysis is correlated with the test results of scaled down rings, as well as how the pre-compression rings’ manufacturing process will be qualified.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of microstructure anisotropy on the deformation of MAX polycrystals studied by in-situ compression combined with neutron diffraction

In situ compression tests combined with neutron diffraction were performed on Ti{sub 2}AlN MAX polycrystals with lamellar anisotropic microstructure: the diffraction peak evolution (position and profile) with applied stress reveals that lamellar grains parallel to compression axis remain elastic while lamellar grains perpendicular to compression plastify, both families being subjected to strong variations of heterogeneous strains (types II and III). We demonstrate that this behavior originates from the complex response of the very anisotropic lamellar microstructure and explains the observation of reversible hysteretic loops when cycling MAX polycrystals even in the elastic regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shockless compression and release behavior of beryllium to 110 GPa

A magnetohydrodynamic loading technique was used to shocklessly compress beryllium to peak longitudinal stresses of 19–110 GPa and, subsequently, unload in order to determine both the compressive response and also the shear stress supported upon release. Loading strain rates were on the order of 10{sup 6 }s{sup −1}, while the unloading rates were nearly constant at 3 × 10{sup 5 }s{sup −1}. Velocimetry was used to monitor the ramp and release behavior of a beryllium/lithium fluoride window interface. After applying window corrections to infer in situ beryllium velocities, a Lagrangian analysis was employed to determine the material response. The Lagrangian wavespeed-particle velocity response is integrated to generate the stress-strain path, average change in shear stress over the elastic unloading, and estimates of the shear modulus at peak compression. These data are used to infer the pressure dependence of the flow strength at the unloading rate. Comparisons to several strength models reveal good agreement to 45 GPa, but the data indicate 20%–30% higher strength near 100 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High resolution transmission electron microscopic in-situ observations of plastic deformation of compressed nanocrystalline gold

Nanocrystalline (nc) metals possess extremely high strength, while their capability to deform plastically has been debated for decades. Low ductility has hitherto been considered an intrinsic behavior for most nc metals, due to the lack of five independent slip systems actively operating during deformation in each nanograin. Here we report in situ high resolution transmission electron microscopic (HRTEM) observations of deformation process of nc gold under compression, showing the excellent ductility of individual and aggregate nanograins. Compression causes permanent change in the profile of individual nanograins, which is mediated by dislocation slip and grain rotation. The high rate of grain boundary sliding and large extent of widely exited grain rotation may meet the boundary compatibility requirements during plastic deformation. The in situ HRTEM observations suggest that nc gold is not intrinsically brittle under compressive loading.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-stage Raman compression of laser pulses with controllable phase fronts

The phase front of an ultrashort laser pulse undergoing Raman amplification and compression in inhomogeneous plasma can be controlled such that it is unaffected by density gradients and thus remains focusable. This is achieved by performing the Raman backscattering in two stages. At the first stage, the standard nonlinear Raman compression of a seed wave takes place and produces a short ultraintense pulse, which yet may be poorly focusable. At the second stage, this amplified pulse is scattered again, now serving as a pump, off a second copy of the initial seed. This stage, which utilizes a denser and shorter plasma, is intended not for compression but rather for passing a significant fraction of the energy to the second seed quickly. Then, the output pulse that is produced is not just short and ultraintense, but also has the smooth phase front of the original seed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗