Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CO 2 capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Warm-season net CO 2 uptake outweighs cold-season emissions over Alaskan North Slope tundra under current and RCP8.5 climate

Abstract Arctic warming has increased vegetation growth and soil respiration during recent decades. The rate of Arctic warming will likely amplify over the 21st century. Previous studies have revealed that the most severe Arctic warming occurred during the cold season (September to May). The cold-season warming has posited significant CO 2 emissions to the atmosphere via respiration, possibly offsetting warm-season (June to August) net CO 2 uptake. However, prevailing Earth system land models poorly represent cold-season CO 2 emissions, making estimates of Arctic tundra annual CO 2 budgets highly uncertain. Here, we demonstrate that an improved version of the energy exascale Earth system model (E3SM) land model (ELMv1-ECA) captures the large amount of cold-season CO 2 emissions over Alaskan Arctic tundra as reported by two independent, observationally-constrained datasets. We found that the recent seven-decades warming trend of cold-season soil temperature is three times that of the warm-season. The climate sensitivity of warm-season net CO 2 uptake, however, is threefold higher than for the cold-season net CO 2 loss, mainly due to stronger plant resilience than microbial resilience to hydroclimatic extremes. Consequently, the modeled warm-season net CO 2 uptake has a larger positive trend (0.74 ± 0.14 gC m −2 yr −1 ) than that of cold-season CO 2 emissions (0.64 ± 0.11 gC m −2 yr −1 ) from 1950 to 2017, supported by enhanced plant nutrient uptake and increased light- and water-use efficiency. With continued warming and elevated CO 2 concentrations under the representative concentration pathway (RCP) 8.5 scenario, the increasing rate of warm-season net CO 2 uptake is more than twice the rate of cold-season emissions (1.33 ± 0.32 gC m −2 yr −1 vs 0.50 ± 0.12 gC m −2 yr −1 ), making the modeled Alaskan Arctic tundra ecosystem a net CO 2 sink by 2100. However, other geomorphological and ecological disturbances (e.g. abrupt permafrost thaw, thermokarst development, landscape-scale hydrological changes, wildfire, and insects) that are not considered here might alter our conclusion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Acoustic Emissions Sensing for Tracing Carbon Dioxide Movement in Caprock of a Carbon Capture Utilizations and Storage System (CCUS) (Final Technical Report)

The overall objective of this research project was to develop a non-invasive acoustic-emission (AE)-based technology that can accurately predict the location and movement of CO 2 through a confining layer in a carbon capture, utilization, and storage (CCUS) system. Specifically, the aim was to explore the feasibility of using the Haines jumps AEs as a passive method to track movement of CO 2 in reservoirs used for CCUS applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Tunable Rapid Uptake Amino Polymer Aerogels for Direct Air Capture of Carbon Dioxide (Final Scientific/Technical Report)

The Palo Alto Research Center (PARC) developed a novel CO 2 adsorbent material, and in collaboration with Lawrence Livermore National Laboratory (LLNL), demonstrated its state-of-the-art performance for direct air capture. The target application for this technology is in direct air carbon capture and storage (DACCS), for which the adsorbent material provides the critical function of binding CO 2 from ambient air. At the beginning of the project, the technology concept and application were established, representing technology readiness level (TRL) 2. The hypothesis was that a microporous polymer comprising a high density of primary amines would make an exceptional adsorbent for direct air capture, and the goal of the project was to prove that hypothesis and advance the technology to TRL 3. To accomplish this, we approached the challenge from the perspective of materials synthesis optimization with the narrow focus of achieving the target material properties. This approach was successful, and we now have a synthetic procedure that results in a novel adsorbent material with the target material properties. The chemical name for the novel adsorbent material is poly(vinylamine-co-divinylbenzene) (PVAm-DVB).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optimal stomatal theory predicts CO 2 responses of stomatal conductance in both gymnosperm and angiosperm trees

Optimal stomatal theory predicts that stomata operate to maximise photosynthesis (A net ) and minimise transpirational water loss to achieve optimal intrinsic water-use efficiency (iWUE). We tested whether this theory can predict stomatal responses to elevated atmospheric CO 2 (eCO 2 ), and whether it can capture differences in responsiveness among woody plant functional types (PFTs). We conducted a meta-analysis of tree studies of the effect of eCO 2 on iWUE and its components A net and stomatal conductance (g s ). We compared three PFTs, using the unified stomatal optimisation (USO) model to account for confounding effects of leaf–air vapour pressure difference (D). We expected smaller g s , but greater A net , responses to eCO 2 in gymnosperms compared with angiosperm PFTs. We found that iWUE increased in proportion to increasing eCO 2 in all PFTs, and that increases in A net had stronger effects than reductions in g s . The USO model correctly captured stomatal behaviour with eCO 2 across most datasets. The chief difference among PFTs was a lower stomatal slope parameter (g 1 ) for the gymnosperm, compared with angiosperm, species. Land surface models can use the USO model to describe stomatal behaviour under changing atmospheric CO 2 conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Modeling CO 2 flow through faulted/fractured reservoirs using tEDFM in corner-point grids

The interest in underground CO 2 storage has increased significantly over the last decade because of the rising concern about global warming due to the growing levels of greenhouse gases in the atmosphere. Considering that CO 2 accounts for 80% of these greenhouse gases, carbon capture, utilization, and storage (CCUS) is regarded as one of the most direct approaches to achieving the net zero carbon target. Although CO 2 storage in deep saline aquifers and depleted gas reservoirs has been studied extensively, most studies use commercial simulators that model faults/fractures by simply modifying the transmissibility in the direction perpendicular to the fault surfaces. Here, this work shows that this simplistic approach ignores the accelerated flow in the directions parallel to the fault plane, leading to significantly higher leakage along the fault surface. To accurately model the flow of CO 2 in faulted reservoirs, we present the first transient embedded discrete fracture model for corner-point grids (tEDFM-CPG). By comparing the results of the tEDFM-CPG to high-resolution reference solutions, we show that this approach is accurate and efficient at predicting CO 2 flow in faulted/fractured reservoirs. Finally, this work presents the use of mixed reality (MR) to efficiently observe CO 2 gas migration in the interior of these corner-point grid systems.

25 ENERGY STORAGE↗
DOE OSTI2026

Spin Polarization Enhanced Ethanol Selectivity in Electrocatalytic CO 2 Reduction on the Paramagnetic CuO Surface

We report an electrochemical CO 2 reduction reaction catalyzed by a paramagnetic and conductive CuO/Cu interface with spins polarized by a moderate external magnetic field (MF) of similar to 800 gauss, achieving a similar to 30% increase in CO 2 -to-C 2+ Faradaic efficiency (FE) compared to that in the absence of the MF in a flow cell electrolyzer. At a current density of 400 mA/cm 2 , the CO 2 -to-C 2+ FE reached 86.7 ± 2.7% with 47.9 ± 1.4% cathodic energy efficiency (EE) in contrast to the CO 2 -to-C 2+ FE of 67.6% with 36.4% of EE in the absence of MF. Notably, ethanol production exhibits a much higher response to the MF (similar to 55.6% increase in FE) than ethylene (similar to 6.4% increase in FE) at 400 mA/cm 2 . In situ surface-enhanced Raman spectroscopy (SERS) captured magnetic-field-enhanced *CO coverage and ethanol-forming C 2 intermediates on CuO/Cu, providing direct spectroscopic evidence of spin-modulated pathway selection. Here, computational study suggests that the enhancement of ethanol selectivity is due to the reduced reaction kinetic barrier under MF, while the ethylene selectivity is less affected, mainly due to the insensitivity of the kinetic barriers under MF.

10 SYNTHETIC FUELS↗
DOE OSTI2024

A novel conditional generative model for efficient ensemble forecasts of state variables in large-scale geological carbon storage

Integrating monitoring data to efficiently update reservoir pressure and CO 2 plume distribution forecasts presents a significant challenge in geological carbon storage (GCS) applications. Inverse modeling techniques are commonly used to fuse observational data and refine reservoir model parameters, thereby improving state variable forecasts. However, these techniques often rely on linear or Gaussian assumptions, which can limit their effectiveness in accurately predicting state variables. Moreover, simulating large-scale three-dimensional (3D) GCS problems is computationally expensive, making iterative runs in inverse problems prohibitive. To address these challenges, we propose a conditional generative model utilizing the score-based diffusion method for real-time 3D pressure and saturation field distribution predictions. Our approach involves solving the score function with a mini-batch-based Monte Carlo estimator to generate labeled data. This data is subsequently employed to train a fully connected neural network, enabling it to learn the conditional sample generator within a supervised learning framework. This method enables the rapid generation of a large ensemble of predictions, facilitating comprehensive uncertainty quantification of state variables. Here we applied our method to forecast the dynamic 3D distributions of pressure and saturation fields over a 30-year injection period. The statistical assessment with low root mean square error (RMSE) values demonstrates that our method can accurately predict the spatiotemporal distributions of both pressure and saturation fields. Moreover, the developed conditional generative model shows high computational efficiency by generating 100 ensemble forecasts of 3D state variables in less than 10 min. The consistency between ensemble averages and ground truth values further illustrates the model’s capability to capture state variable dynamics during the CO 2 plume injection process. Notably, the ground truth values fall within the ensemble forecasts, indicating that our uncertainty quantification effectively captures variability and potential noise in the observations. Thus, the developed conditional generative model proves to be a more efficient, accurate, and practical tool for GCS applications, facilitating timely risk analysis and informed decision-making.

58 GEOSCIENCES↗
DOE OSTI2022

Defining the scope for altering rice leaf anatomy to improve photosynthesis: a modelling approach

Summary Leaf structure plays an important role in photosynthesis. However, the causal relationship and the quantitative importance of any single structural parameter to the overall photosynthetic performance of a leaf remains open to debate. In this paper, we report on a mechanistic model, eLeaf, which successfully captures rice leaf photosynthetic performance under varying environmental conditions of light and CO 2 . We developed a 3D reaction‐diffusion model for leaf photosynthesis parameterised using a range of imaging data and biochemical measurements from plants grown under ambient and elevated CO 2 and then interrogated the model to quantify the importance of these elements. The model successfully captured leaf‐level photosynthetic performance in rice. Photosynthetic metabolism underpinned the majority of the increased carbon assimilation rate observed under elevated CO 2 levels, with a range of structural elements making positive and negative contributions. Mesophyll porosity could be varied without any major outcome on photosynthetic performance, providing a theoretical underpinning for experimental data. eLeaf allows quantitative analysis of the influence of morphological and biochemical properties on leaf photosynthesis. The analysis highlights a degree of leaf structural plasticity with respect to photosynthesis of significance in the context of attempts to improve crop photosynthesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

PCOR Partnership: A Catalyst for Commercial CCUS Deployment

Conference presentation at Carbon Capture & Storage Summit, Minneapolis, Minnesota, June 10-12, 2024. An overview of the Plains CO 2 Reduction (PCOR) Partnership Initiative and active commercial carbon capture, utilization, and storage (CCUS) activity in the region. The presentation discusses solutions for CCUS deployment challenges.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Two distinct rotations of bithiazole DNA intercalation revealed by direct comparison of crystal structures of Co(III)•bleomycin A 2 and B 2 bound to duplex 5'-TAGTT sites

Bleomycins constitute a family of anticancer natural products that bind DNA through intercalation of a C-terminal tail/bithiazole moiety and hydrogen-bonding interactions between the remainder of the drug and the minor groove. The clinical utility of the bleomycins is believed to result from single- and double-strand DNA cleavage mediated by the HOO-Fe(III) form of the drug. The bleomycins also serve as a model system to understand the nature of complex drug-DNA interactions that may guide future DNA-targeted drug discovery. In this study, the impact of the C-terminal tail on bleomycin-DNA interactions was investigated. Toward this goal, we determined two crystal structures of HOO-Co(III)•BLMA 2 “green” (a stable structural analogue of the active HOO-Fe(III) drug) bound to duplex DNA containing 5'-TAGTT, one in which the entire drug is bound (fully bound) and a second with only the C-terminal tail/bithiazole bound (partially bound). The structures reported here were captured by soaking HOO-Co(III)•BLMA 2 into preformed host–guest crystals including a preferred DNA-binding site. While the overall structure of DNA-bound BLMA 2 was found to be similar to those reported earlier at the same DNA site for BLMB 2 , the intercalated bithiazole of BLMB 2 is “flipped” 180° relative to DNA-bound BLMA 2 . Further, this finding highlights an unidentified role for the C-terminal tail in directing the intercalation of the bithiazole. In addition, these analyses identified specific bond rotations within the C-terminal domain of the drug that may be relevant for its reorganization and ability to carry out a double-strand DNA cleavage event.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Hydrocarbon production reduces natural methane seeps in the Santa Barbara channel

Abundant natural hydrocarbon seepage in the Santa Barbara Channel includes large amounts of gas, mainly methane. Numerous seeps are focused along a faulted anticlinal axis where in 1982 ARCO placed two large (900 m 2 each) steel gas capture tents on the seabed adjacent to Platform Holly. The seep rate into the tent at high tide is about 5 percent less compared with low tide (2m tidal range). An earthquake in 2013 (M = 4.8) did not affect seepage rates into the steel tents, indicating that gas was not released by fault dilation. The CO 2 and H 2 S content of the captured gas are anomalously low compared to typical Holly gas due to bacterial and sea water-gas interaction at the seep tent. Platform Holly production had an overall effect of reducing gas seepage into the tents over time. Wells beneath the tents at 1-km depth had a much greater influence on the seepage rate than more distal wells. The nearby wells had a direct effect on seepage rate when they were put on production (seepage decreased) versus shut in (seepage increased). The response time was within hours, indicating a direct hydraulic connection between the reservoir at 1 km subsea and the seabed. Permeability of the approximate 1-km fault pathway between the reservoir and the seep tent is calculated to be about 3 × 10 -14 m 2 (30 millidarcys). Gradually, the seep rate declined from peak flow in 1990 (4.5×10 4 m 3 dy-1) to less than 7.1×10 3 m 3 dy -1 in 2013. In June of 2013, a horizontal well was completed high on the structural anticline between Platform Holly and directly beneath the seep tents. Within three weeks of turning on this new well, seepage into the tents completely ceased, ending more than 30 years of natural methane seepage captured by the tents.

58 GEOSCIENCES↗
DOE OSTI2023

Membrane Adsorbents Comprising Self-Assembled Inorganic Nanocages (SINCs) for Super-fast Direct Air Capture Enabled by Passive Cooling

The objectives of the proposed project were to develop highly porous membrane adsorbents comprising CO 2 -philic polymers and self-assembled inorganic nanocages (SINCs) for rapid temperature swing adsorption using electricity-free solar heating and radiative cooling, enabling an economically viable approach for direct air capture (DAC). Our core technical activities combine three key innovations. (1) Highly porous flat-sheet membrane adsorbents contain CO 2 -philic amines that can be easily produced using a phase inversion method. (2) CO 2 -philic SINCs can be easily dispersed in the polymers with great stability (compared with the metal-organic frameworks or MOFs). (3) The adsorption and desorption are integrated with solar heating and radiative cooling for rapid continuous operation, in contrast to traditional long-cycle separate operation. The membrane adsorbents containing amines, polymers, and SINCs were produced using a one-step industrial process. The porous membranes coupled with porous SINCs offer low resistance for gas flow and fast CO 2 sorption/desorption cycles, while the incorporation of the additional amine groups provides high CO 2 sorption capacity. The key achievements are summarized below. (1) Membrane adsorbents with high PEI loading (>40%), high porosity of >80%, and low gasflow resistance were prepared in one step using commercially available, low-cost materials. (2) Membrane adsorbents based on Solupor and PEI show CO 2 sorption capacity of >1.5 mmol/g using air containing 400 ppm at a relative humidity of 15%. (3) Effect of the adsorbent compositions (such as PEI type, PEI content, SINC content, porosity) on the CO 2 sorption was systematically investigated. (4) Effect of the processing conditions (such as CO 2 content, temperature, and relative humidity) on the CO 2 sorption was systematically investigated; (5) The stability of the membrane adsorption against many cycles of sorption and desorption was studied. The higher molecular weight of PEI (PEI25k) shows better stability than PEI800. (6) Advanced materials with radiative cooling were developed, which can decrease the temperature by 5-7 °C compared to the ambient temperature. (7) Preliminary techno-economic analysis shows that our process may achieve a capture cost of $1,343/tonne CO 2 with a total OPEX cost of $1,112/tonne CO 2 . The adsorbent replacement cost accounted for 52% of the total OPEX cost. Membrane adsorbents with lower costs and longer operation life can significantly decrease the cost. The proposed project directly addresses the requirement of DE-FOA-0002188, i.e., novel materials with CO 2 adsorption capacity for direct air capture with integrated solar heating and radiative cooling to reduce the cost of the DAC. Our future work will focus on the development of low-cost adsorbents that can be stable at the sorption and desorption conditions for long term.

14 SOLAR ENERGY↗
DOE OSTI2020

Empirical Evidence for the Potential Climate Benefits of Decarbonizing Light Vehicle Transport in the U.S. with Bioenergy from Purpose-Grown Biomass with and without BECCS

Climate mitigation scenarios limiting global temperature increases to 1.5 °C rely on decarbonizing vehicle transport with bioenergy production plus carbon capture and storage (BECCS), but climate impacts for producing different bioenergy feedstocks have not been directly compared experimentally or for ethanol vs electric light-duty vehicles. A field experiment at two Midwest U.S. sites on contrasting soils revealed that feedstock yields of seven potential bioenergy cropping systems varied substantially within sites but little between. Bioenergy produced per hectare reflected yields: miscanthus > poplar > switchgrass > native grasses ≈ maize stover (residue) > restored prairie ≈ early successional. Greenhouse gas emission intensities for ethanol vehicles ranged from 20 to -179 g CO 2 e MJ –1 : maize stover $\gg$ miscanthus ≈ switchgrass ≈ native grasses ≈ poplar > early successional ≥ restored prairie; direct climate benefits ranged from ~80% (stover) to 290% (restored prairie) reductions in CO 2 e compared to petroleum and were similar for electric vehicles. With carbon capture and storage (CCS), reductions in emission intensities ranged from 204% (stover) to 416% (restored prairie) for ethanol vehicles and from 329 to 558% for electric vehicles, declining 27 and 15%, respectively, once soil carbon equilibrates within several decades of establishment. Extrapolation based on expected U.S. transportation energy use suggests that, once CCS potential is maximized with CO 2 pipeline infrastructure, negative emissions from bioenergy with CCS for light-duty electric vehicles could capture >900 Tg CO 2 e year –1 in the U.S. In the future, as other renewable electricity sources become more important, electricity production from biomass would offset less fossil fuel electricity, and the advantage of electric over ethanol vehicles would decrease proportionately.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A Boundary Element Model for Assessing Large‐Scale Pressurization in Faulted Geological Storage Systems

Assessing large-scale pressurization at the regional scale—a possible outcome of large subsurface storage applications such as wastewater injection and geological carbon sequestration—presents significant computational challenges. These challenges are particularly pronounced when accounting for complex geologic structures with multiple reservoir and caprock layers, fault zones, and wells. This study introduces a computationally efficient model that integrates single-phase semi-analytical solutions with a boundary element (BE) approach. The model simulates pressure propagation in multilayered 3D systems, including vertical faults, caprock, basement, and confining units. We apply this new model to a representative scenario involving CO 2 injection near a partially sealing fault with verification against an independent two-phase flow model. Results demonstrate that our model accurately captures far-field pressure responses and that, outside the CO 2 plume zone, pressure predictions from single-phase and two-phase models are nearly identical. This supports the use of single-phase models like ours for efficient estimation of far-field pressure changes. Additionally, we demonstrate its effectiveness at a large scale, incorporating multiple wells and faults. With its ability to represent multiple wells, fault zones, and geological heterogeneity, our model is well suited for assessments of basin-scale pressurization. Its computational efficiency also makes it a promising tool for integration with optimization frameworks aimed at designing and managing injection strategies in faulted storage systems.

Cihan, A. [Lawrence Berkeley National Laboratory (↗
DOE OSTI2022

Meeting sustainable aviation fuel policy targets through first generation corn biorefineries

This paper investigates options to produce low carbon and renewable aviation fuel through existing commercial first generation biorefineries, which could be strategic given the rapid growth of the electric vehicle market for personal mobility. We evaluate the environmental impact of retrofitting a first generation biorefinery to produce aviation fuel through chemical process simulation. The analysis investigates the potential for reducing greenhouse gas (GHG) emissions and displacing fossil fuel (petroleum-based jet kerosene) in the aviation fuel industry through using corn feedstocks in dry grind biorefineries to convert sugars to 1,4-dimethylcyclooctane (DMCO), which qualifies as renewable jet-A fuel blend and is infrastructure compatible. Further, the average life cycle GHG emissions for a baseline case and a scenario with carbon capture and storage (CCS) of fermentative CO 2 are 36 and 5g CO 2 e/MJ DMCO, respectively. Investment in CCS at the biorefinery and adoption of crop best management practices on farms are essential for mitigating the risks of induced land use change GHG emissions for existing corn biorefineries. DMCO as a low-carbon aviation fuel could be a strategic fuel product for retrofitting existing corn dry grind facilities. For aviation fuel supply, corn dry grind facilities could displace about 12% of jet fuel demand in the near term, which would meet sustainable aviation fuel policy targets. We conclude that corn-to-DMCO shows promise for near-term low-carbon fuel markets in the aviation industry and as a bridge to developing biomass-based jet fuel in the future.

09 BIOMASS FUELS↗
DOE OSTI2022

SECARB-USA: Preliminary Regional Commercialization Plan (Task 4.4.a)

The SECARB-USA region refers to the states in the southeastern portion of the United States including Alabama, Arkansas, Florida, Georgia, Kentucky, Louisiana, Mississippi, Missouri, North Carolina, eastern Oklahoma, South Carolina, Tennessee, eastern Texas, Virginia, and West Virginia. This region is a hub for economic activity and accordingly emits almost 1 Gtpa of CO 2 which is the motivation for the development of Carbon Capture and Storage (CCS). This preliminary commercialization plan reviews the status of commercialization of CCS within the region, outlines the infrastructure buildout to achieve CO 2 reduction goals by 2050 described by the Los Alamos National Lab in Task 4.1.b (see the Task 4.1.b “Technoeconomic Analysis of Infrastructure Buildout Scenarios” report), and provides an early estimate of the economic activity and employment creation resulting from the increase in CCS activity. Additionally, this report addresses the challenges associated with commercializing CCS within the region at a large scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Wind-Driven Direct Air Capture System Using 3D Printed, Passive, Amine-Loaded Contactors (WEDAC)

This project advanced the development of a novel wind-driven direct air capture (WEDAC) system for removing carbon dioxide (CO 2 ) from the atmosphere. Our research focused on combining passive air contact with electrothermal desorption using specially designed carbon fiber modules, aiming to provide a scalable, low-cost, and energy-efficient alternative to conventional carbon capture systems.

36 MATERIALS SCIENCE↗