Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLEAVAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Substrate-Induced Conformational Changes Occur in All Cleaved Forms of Caspase-6

Caspase-6 is an apoptotic cysteine protease that also governs disease progression in Huntington's and Alzheimer's diseases. Caspase-6 is of great interest as a target for treatment of these neurodegenerative diseases; however, the molecular basis of caspase-6 function and regulation remains poorly understood. In the recently reported structure of caspase-6, the 60's and 130's helices at the base of the substrate-binding groove extend upward, in a conformation entirely different from that of any other caspase. Presently, the central question about caspase-6 structure and function is whether the extended conformation is the catalytically competent conformation or whether the extended helices must undergo a large conformational rearrangement in order to bind substrate. We have generated a series of caspase-6 cleavage variants, including a novel constitutively two-chain form, and determined crystal structures of caspase-6 with and without the intersubunit linker. This series allows evaluation of the role of the prodomain and intersubunit linker on caspase-6 structure and function before and after substrate binding. Caspase-6 is inherently more stable than closely related caspases. Cleaved caspase-6 with both the prodomain and the linker present is the most stable, indicating that these two regions act in concert to increase stability, but maintain the extended conformation in the unliganded state. Moreover, these data suggest that caspase-6 undergoes a significant conformational change upon substrate binding, adopting a structure that is more like canonical caspases.

59 BASIC BIOLOGICAL SCIENCES↗

Uniaxial creep response of Alloy 800H in impure helium and in low oxygen potential environments for nuclear reactor applications.

Studies were conducted on the creep behavior of Alloy 800H in impure helium and in a 1%CO-CO{sub 2} environment. At relatively low applied stresses and at low temperatures, the presence of methane in helium reduced the rupture strain significantly while increasing the rupture life relative to the behavior in pure helium. The degradation in rupture strain is due to the occurrence of cleavage fracture in the He + CH{sub 4} environment; this explanation is also supported by high activation energy (Q = 723 kJ/mol) for creep in He + CH{sub 4}. At higher applied stresses and also at higher temperatures, creep-rupture behavior in He and He + CH{sub 4} was similar. Creep response in pure He and in CO-CO{sub 2} follows a dislocation climb-controlled power-law behavior whereas that in He + CH{sub 4} has a different behavior as indicated by the high stress exponent (n = 9.8). The activation energy for creep in pure He was 391 kJ/mol and in CO-CO{sub 2} was 398 kJ/mol, and appeared to be independent of stress in both environments. On the other hand, in He + CH{sub 4}, the activation energy (Q = 723 kJ/mol) seems to be dependent on stress.

03 NATURAL GAS↗

Tensile fracture characteristics of nanostructured ferritic alloy 14YWT

High temperature tensile fracture behavior has been characterized for the ferritic alloy 14YWT (SM10 heat) with the composition of Fe-14Cr-3W-0.4Ti (in wt.%) and strengthened by dispersion of nanometer-sized oxygen, titanium, and yttrium rich clusters. Tensile tests were performed at various temperatures ranging from room temperature to 1000 C in a vacuum condition using a nominal strain rate of 10-3s-1. Comparing with the existing oxide dispersion strengthened (ODS) steels such as Eurofer 97 and PM2000, the nanostructured alloy showed much higher yield and tensile strength over the test temperature range, but with lower elongation. Microstructural characterization for fractured tensile specimens was focused on the details of fracture morphology and mechanism to provide a feedback for process improvement. Below 600 C, the fracture surfaces exhibited a quasi-ductile behavior presented by a mixture of dimples and cleavage facets. At or above 600 C, however, the fracture surfaces were fully covered with dimples. The spherical particles that seemed to be oxide or carbide particles were found inside of dimples. It was notable that numerous microcracks were observed on the side surface of broken specimens. Formation of these microcracks is believed to be the main origin of the poor ductility of 14YWT alloy. It is suggested that any grain boundary strengthening measure is essential to improve the fracture property of the alloy.

36 MATERIALS SCIENCE↗

VS{sub 2}/rGO hybrid nanosheets prepared by annealing of VS{sub 4}/rGO

Layered transition metal dichalcogenides and their hybrids with reduced grpahene oxide (rGO) have attracted much interest due to many potential applications for electrode materials in Li ion batteries and supercapacitors and electro-catalysts for hydrogen evolution reaction. Among them, synthesis of VS{sub 2} sheets and VS{sub 4}/rGO hybrid via a hydrothermal reaction was recently reported, whereas VS{sub 2}/rGO hybrid sheets have not been reported. In this study, we report VS{sub 2}/rGO hybrid sheets after annealing VS{sub 4}/rGO hybrid materials at 350 °C. The conversion of VS{sub 4} to VS{sub 2} on rGO sheets after annealing is attributed to a thermal cleavage of VS{sub 4}. - Highlights: • VS2/rGO hybrid sheets were obtained by annealing of VS4/rGO at 350 °C. • The phase transition from monoclinic to hexagonal is occurred. • The HER performance of VS2/rGO is investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low Thermal Gradient Czochralski growth of large CdWO{sub 4} crystals and electronic properties of (010) cleaved surface

The crystal growth of large high-quality inclusion-free CdWO4 crystals, 110 mm in diameter and mass up to 20 kg, has been carried out by the Low Thermal Gradient Czochralski (LTG Cz) technique. The high-purity CdWO{sub 4}(010) surface has been prepared by cleavage and high structural quality of the surface has been verified by RHEED, revealing a system of Kikuchi lines. The chemical state and electronic structure of the surface have been studied using X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES). The total and partial densities of states of the CdWO{sub 4} tungstate were calculated employing the first-principles full potential linearized augmented plane wave (FP-LAPW) method. The results indicate that the principal contributors to the valence band of CdWO{sub 4} are the Cd 4d, W 5d and O 2p states which contribute mainly at the bottom, in the central portion and at the top of the valence band, respectively, with also significant contributions of the mentioned states throughout the whole CdWO{sub 4} valence-band region. With respect to the occupation of the O 2p states, the results of the FP-LAPW calculations are confirmed by comparison on a common energy scale of the XPS valence-band spectrum and the XES band representing the energy distribution of the O 2p states in this compound. Additionally, the FP-LAPW data allow us to conclude that the CdWO{sub 4} tungstate is a non-direct semiconductor. - Highlights: • Large high-quality CdWO{sub 4} crystals, up to 115 mm in diameter and mass up to 20 kg, have been grown. • The high-purity cleaved CdWO{sub 4}(010) surface has been studied by the XPS and XES methods. • The principal contributors to the CdWO{sub 4} valence band are the Cd 4d, W 5d and O 2p states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal growth of Bi{sub 2}Te{sub 3} and noble cleaved (0001) surface properties

A high quality Bi{sub 2}Te{sub 3} crystal has been grown by Bridgman method with the use of rotating heat field. The phase purity and bulk structural quality of the crystal have been verified by XRD analysis and rocking curve observation. The atomically smooth Bi{sub 2}Te{sub 3}(0001) surface with an excellent crystallographic quality is formed by cleavage in the air. The chemical and microstructural properties of the surface have been evaluated with RHEED, AFM, STM, SE and XPS. The Bi{sub 2}Te{sub 3}(0001) cleaved surface is formed by atomically smooth terraces with the height of the elemental step of ~1.04±0.1 nm, as estimated by AFM. There is no surface oxidation process detected over a month keeping in the air at normal conditions, as shown by comparative core level photoelectron spectroscopy. - Graphical abstract: A high quality Bi{sub 2}Te{sub 3} crystal has been grown by Bridgman method with the use of rotating heat field and the Bi{sub 2}Te{sub 3}(0001) cleaved surface has been evaluated with RHEED, AFM, STM, SE and XPS. - Highlights: • High-quality Bi{sub 2}Te{sub 3} crystal of 10 mm in diameter and 50 mm long have been grown. • The high-purity cleaved Bi{sub 2}Te{sub 3}(0001) surface has been evaluated by RHEED, AFM, STM and XPS methods. • The Bi{sub 2}Te{sub 3} surface covered by atomically smooth (0001) terraces is chemically stable for a long time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation and mechanical behavior in annealed 2205 duplex stainless steel welds

The phase transformations and mechanical behaviour during welding and subsequent annealing treatment of 2205 duplex stainless steel have been investigated. Detailed microstructural examination showed the presence of higher ferrite amounts in the heat affected zone (HAZ), while higher amounts of austenite were recorded in the centre region of the weld metal. Annealing treatments in the temperature range of 800-1000 deg. C resulted in a precipitation of {sigma} phase and M{sub 23}C{sub 6} chromium carbides at the {gamma}/{delta} interfaces that were found to be preferential precipitation sites. Above 1050 deg. C, the volume fraction of {delta} ferrite increases with annealing temperature. The increase of {delta} ferrite occurs at a faster rate in the HAZ than in the base metal and fusion zone. Optimal mechanical properties and an acceptable ferrite/austenite ratio throughout the weld regions corresponds to annealing at 1050 deg. C. Fractographic examinations showed that the mode of failure changed from quasi-cleavage fracture to dimple rupture with an increase in the annealing temperature from 850 to 1050 deg. C.

36 MATERIALS SCIENCE↗

Characterization of AZ31B wrought magnesium alloy joints welded by high power fiber laser

A 6 kW fiber laser is used to weld AZ31B wrought magnesium alloy and the characterization of welded joints are studied by the observations of bead size, microstructure and mechanical properties. The accepted joints without macro-defects can be obtained when the laser power is in the range of 2.5 to 4.0 kW. Typical hexagonal dendrites are observed in the fusion zone, whose average semi-axis length increases with increasing heat input or decreasing welding speed. The minimum ultimate tensile strength of welded joints reaches 227 MPa, 94.6% of the base metal. And when the heat input reduces to 48 J/mm or lower, the joints are fractured in the base metal, showing stronger failure strength compared to the base metal. For the joints ruptured in the weld metal, the fracture surface is characterized by a ductile-brittle mixed pattern consisting of both dimples and cleavages. Finally, the formation mechanism of pore in the welds is discussed and summarized by the pore morphologies on the fracture surface. - Highlights: {yields} Accepted joints of AZ31B Mg alloy are produced by high power fiber laser. {yields} Optimal welding parameters are summarized by experimental observations. {yields} Obvious hexagonal dendrites are observed in the fusion zone. {yields} The joints are stronger than base metal as the heat input is lower than 48 J/mm. {yields} Pore formation mechanism of welded joints is discussed and summarized.

36 MATERIALS SCIENCE↗

Effect of service exposure on fatigue crack propagation of Inconel 718 turbine disc material at elevated temperatures

In this study, the fatigue crack propagation behavior of Inconel 718 turbine disc with different service times from 0 to 4229 h was investigated at 738 and 823 K. No notable change in microstructural features, other than the increase in grain size, was observed with increasing service time. With increasing service time from 0 to 4229 h, the fatigue crack propagation rates tended to increase, while the ΔK{sub th} value decreased, in low ΔK regime and lower Paris' regime at both testing temperatures. The fractographic observation using a scanning electron microscope suggested that the elevated temperature fatigue crack propagation mechanism of Inconel 718 changed from crystallographic cleavage mechanism to striation mechanism in the low ΔK regime, depending on the grain size. The fatigue crack propagation mechanism is proposed for the crack propagating through small and large grains in the low ΔK regime, and the fatigue crack propagation behavior of Inconel 718 with different service times at elevated temperatures is discussed. - Highlights: • The specimens were prepared from the Inconel 718 turbine disc used for 0 to 4229 h. • FCP rates were measured at 738 and 823 K. • The ΔK{sub th} values decreased with increasing service time. • The FCP behavior showed a strong correlation with the grain size of used turbine disc.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of resistance-spot-welded joints for A5052 aluminum alloy and DP 600 steel

The microstructure and mechanical properties of resistance-spot-welded A5052 aluminum alloy and DP 600 dual-phase steel joint were studied. The fusion zone (FZ) and heat-affected zone (HAZ) of DP 600 exhibited lath martensite and ferrite-martensite structures, respectively. The microstructure of FZ and HAZ in the A5052 side was composed of cellular crystals and the boundary region of FZ exhibited a columnar crystal morphology. A Fe{sub 2}Al{sub 5} intermetallic compound (IMC) layer with 3.3 μm thickness was found adjacent to the DP 600 side, whereas a needle-shaped Fe{sub 4}Al{sub 13} IMC layer with length of 0.67 μm to 15.8 μm was found adjacent to the aluminum alloy side. The maximum tensile shear load of the A5052/DP 600 joint was 5.5 KN, with a corresponding molten nugget diameter of 6.3 mm. The fracture morphology of the optimized A5052/DP 600 joint was mainly an elongated dimple fracture accompanied by cleavage fracture. - Highlights: •A5052 and DP 600 with large gaps in properties were investigated by RSW. •The microstructures of RSW joints in DP 600/A5052 were examined detailedly. •The micro/macro-characteristics and strength relations of joints were analyzed.

36 MATERIALS SCIENCE↗

In situ investigation of the tensile deformation of laser welded Ti{sub 2}AlNb joints

The tensile deformation behavior of laser welded Ti{sub 2}AlNb joints was investigated using in situ analysis methods. The fracture mode of the single-B2-phase fusion zone was quasi-cleavage at room temperature and intergranular at 650 °C, while that of base metal was microvoid coalescence at both room temperature and 650 °C. Tensile deformation at room temperature was observed using in situ SEM tensile testing. In base metal, microcracks nucleated and propagated mainly within the O phase or along O/B2 phase boundaries. While both the cross- and multi-slips were found in the single-B2-phase fusion zone, a confocal laser scanning microscopy was used to observe the crack initiation and propagation process in situ at 650 °C. Cracks mainly formed along the B2/O phase boundaries in base metal, along the fragile grain boundaries of B2 phase in the fusion zone. The thermal simulation experiment and following TEM analysis indicated that the precipitation of continuous O-phase films along the B2 grain boundaries resulted in the high temperature brittleness of laser welded Ti{sub 2}AlNb joints. - Highlights: •Cracks formed within O phase or along B2/O boundaries in the base metal. •Cross- and multi-slips relieved stress in the fusion zone at room temperature. •Cracks mainly formed along the B2/O boundaries at 650 °C. •In the fusion zone, intergranular cracks were in situ observed at 650 °C. •O-phase films along B2 grain boundaries caused the high temperature brittleness.

36 MATERIALS SCIENCE↗

Flavonol Activation Defines an Unanticipated Ligand-Binding Site in the Kinase-RNase Domain of IRE1

Signaling in the most conserved branch of the endoplasmic reticulum (ER) unfolded protein response (UPR) is initiated by sequence-specific cleavage of the HAC1/XBP1 mRNA by the ER stress-induced kinase-endonuclease IRE1. We have discovered that the flavonol quercetin activates yeast IRE1's RNase and potentiates activation by ADP, a natural activating ligand that engages the IRE1 nucleotide-binding cleft. Enzyme kinetics and the structure of a cocrystal of IRE1 complexed with ADP and quercetin reveal engagement by quercetin of an unanticipated ligand-binding pocket at the dimer interface of IRE1's kinase extension nuclease (KEN) domain. Analytical ultracentrifugation and crosslinking studies support the preeminence of enhanced dimer formation in quercetin's mechanism of action. These findings hint at the existence of endogenous cytoplasmic ligands that may function alongside stress signals from the ER lumen to modulate IRE1 activity and at the potential for the development of drugs that modify UPR signaling from this unanticipated site.

59 BASIC BIOLOGICAL SCIENCES↗

OTUB1 Co-opts Lys48-Linked Ubiquitin Recognition to Suppress E2 Enzyme Function

Ubiquitylation entails the concerted action of E1, E2, and E3 enzymes. We recently reported that OTUB1, a deubiquitylase, inhibits the DNA damage response independently of its isopeptidase activity. OTUB1 does so by blocking ubiquitin transfer by UBC13, the cognate E2 enzyme for RNF168. OTUB1 also inhibits E2s of the UBE2D and UBE2E families. Here we elucidate the structural mechanism by which OTUB1 binds E2s to inhibit ubiquitin transfer. OTUB1 recognizes ubiquitin-charged E2s through contacts with both donor ubiquitin and the E2 enzyme. Surprisingly, free ubiquitin associates with the canonical distal ubiquitin-binding site on OTUB1 to promote formation of the inhibited E2 complex. Lys48 of donor ubiquitin lies near the OTUB1 catalytic site and the C terminus of free ubiquitin, a configuration that mimics the products of Lys48-linked ubiquitin chain cleavage. OTUB1 therefore co-opts Lys48-linked ubiquitin chain recognition to suppress ubiquitin conjugation and the DNA damage response.

59 BASIC BIOLOGICAL SCIENCES↗

Functionalized organic nanoparticles from core-crosslinked poly(4-vinylbenzocyclobutene-b-butadiene) diblock copolymer micelles

Sufface-functionalized polymeric nanoparticles were prepared by: a) self~assembly of poly(4-vinylbenzocyclobutene-b-butadiene) diblock copolymer (PVBCB-b-PB) to form spherical micelles (diameter:15-48 nm) in decane, a selective solvent for PB, b) crosslinking of the PVBCB core through thermal dimerization at 200-240 ~ C, and c) cleavage of the PB corona via ozonolysis and addition of dimethyl sulfide to afford aldehyde-functionalized nanoparticles (diameter: -16-20 nm), along with agglomerated nanoparticles ranging from - 30 to -100 nm in diameter. The characterization of the diblock copolymer precursors. the intermediate micelles and the final surface-functionalized crosslinked nanoparticles was carried alit by a combination of size exclusion chromatography, static and dynamic light scattering, viscometry, thermogravimetric analysis, 1 H NMR and FfIR spectroscopy and transmission electron microscopy.

36 MATERIALS SCIENCE↗

The complete VS ribozyme in solution studied by small-angle X-ray scattering

We have used small-angle X-ray solution scattering to obtain ab initio shape reconstructions of the complete VS ribozyme. The ribozyme occupies an electron density envelope with an irregular shape, into which helical sections have been fitted. The ribozyme is built around a core comprising a near-coaxial stack of three helices, organized by two three-way helical junctions. An additional three-way junction formed by an auxiliary helix directs the substrate stem-loop, juxtaposing the cleavage site with an internal loop to create the active complex. This is consistent with the current view of the probable mechanism of trans-esterification in which adenine and guanine nucleobases contributed by the interacting loops combine in general acid-base catalysis.

59 BASIC BIOLOGICAL SCIENCES↗

OMP Peptides Activate the DegS Stress-Sensor Protease by a Relief of Inhibition Mechanism

In the E. coli periplasm, C-terminal peptides of misfolded outer-membrane porins (OMPs) bind to the PDZ domains of the trimeric DegS protease, triggering cleavage of a transmembrane regulator and transcriptional activation of stress genes. We show that an active-site DegS mutation partially bypasses the requirement for peptide activation and acts synergistically with mutations that disrupt contacts between the protease and PDZ domains. Biochemical results support an allosteric model, in which these mutations, active-site modification, and peptide/substrate binding act in concert to stabilize proteolytically active DegS. Cocrystal structures of DegS in complex with different OMP peptides reveal activation of the protease domain with varied conformations of the PDZ domain and without specific contacts from the bound OMP peptide. Taken together, these results indicate that the binding of OMP peptides activates proteolysis principally by relieving inhibitory contacts between the PDZ domain and the protease domain of DegS.

59 BASIC BIOLOGICAL SCIENCES↗

Crystal Structure of a Bacterial Topoisomerase IB in Complex with DNA Reveals a Secondary DNA Binding Site

Type IB DNA topoisomerases (TopIB) are monomeric enzymes that relax supercoils by cleaving and resealing one strand of duplex DNA within a protein clamp that embraces a {approx}21 DNA segment. A longstanding conundrum concerns the capacity of TopIB enzymes to stabilize intramolecular duplex DNA crossovers and form protein-DNA synaptic filaments. Here we report a structure of Deinococcus radiodurans TopIB in complex with a 12 bp duplex DNA that demonstrates a secondary DNA binding site located on the surface of the C-terminal domain. It comprises a distinctive interface with one strand of the DNA duplex and is conserved in all TopIB enzymes. Modeling of a TopIB with both DNA sites suggests that the secondary site could account for DNA crossover binding, nucleation of DNA synapsis, and generation of a filamentous plectoneme. Mutations of the secondary site eliminate synaptic plectoneme formation without affecting DNA cleavage or supercoil relaxation.

36 MATERIALS SCIENCE↗

Reactions of Ethyl Groups on a Model Chromia Surface: Ethyl Chloride on Stoichiometric Alpha-Cr2O3(1012)

The reaction of CH3CH2Cl over the nearly-stoichiometric ?-Cr2O3 (1 0 View the MathML source 2) surface yields gas phase CH2double bond; length as m-dashCH2, CH3CH3, H2 and surface chlorine adatoms. The decomposition reaction is initiated via C-Cl bond cleavage to give a surface ethyl (CH3CH2-) intermediate. A rate-limiting ?-hydride elimination from the surface ethyl species produces gas phase CH2double bond; length as m-dashCH2 and surface hydrogen atoms. Two parallel competing reactions form CH3CH3, via ?-hydride addition to remaining surface ethyl species (reductive elimination), and H2, via the combination of two surface hydrogen atoms. The chlorine freed from the dissociation of CH3CH2Cl binds at the five-coordinate surface Cr3+ sites on the stoichiometric surface and inhibits the surface chemistry via simple site blocking. No surface carbon deposition is observed from the thermal reaction of ethyl chloride, suggesting that ethyl intermediates are not primary coke forming intermediates in the dehydrogenation of ethane over (1 0 View the MathML source 2) facets of ?-Cr2O3.

01 COAL, LIGNITE, AND PEAT↗