Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALORIMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Nanostructured self-assembly materials from neat and aqueous solutions of C18 lipid pro-drug analogues of Capecitabine—a chemotherapy agent. Focus on nanoparticulate cubosomes™ of the oleyl analogue

A series of prodrug analogues based on the established chemotherapy agent, 5-fluorouracil, have been prepared and characterized. C18 alkyl and alkenyl chains with increasing degree of unsaturation were attached to the N 4 position of the 5-fluorocytosine (5-FC) base via a carbamate bond. Physicochemical characterization of the prodrug analogues was carried out using a combination of differential scanning calorimetry, cross-polarized optical microscopy, X-ray diffraction and small-angle X-ray scattering. The presence of a monounsaturated oleyl chain was found to promote lyotropic liquid crystalline phase formation in excess water with a fluid lamellar phase observed at room temperature and one or more bicontinuous cubic phases at 37 °C. The bulk phase was successfully dispersed into liposomes or cubosomes at room and physiological temperature respectively. In vitro toxicity of the nanoparticulate 5-FCOle dispersions was evaluated against several normal and cancer cell types over a 48 h period and exhibited an IC 50 of -100 μM against all cell types. The in vivo efficacy of 5-FCOle cubosomes was assessed against the highly aggressive mouse 4T1 breast cancer model and compared to Capecitabine (a water-soluble commercially available 5-FU prodrug) delivered at the same dosages. After 21 days of treatment, the 0.5 mmol 5-FCOle treatment group exhibited a significantly smaller average tumour volume than all other treatment groups including Capecitabine at similar dosage. These results exemplify the potential of self-assembled amphiphile prodrugs for delivery of bioactives in vivo.

59 BASIC BIOLOGICAL SCIENCES↗

Milling induces disorder in crystalline griseofulvin and order in its amorphous counterpart

This study investigates two apparently similar thermal signatures, shaped as bimodal exotherms, observed when either the crystalline or the amorphous from of the drug are subjected to milling. Crystalline griseofulvin was cryomilled and the (quenched-melt) amorphous form was subjected to either cryomilling or grinding. The thermal and surface properties of the resulting samples were analyzed using differential scanning calorimetry (DSC) and surface energy analysis. After milling, both the crystalline and the amorphous material revealed visually similar bimodal exothermic events when the heating rate was 20 C min{sup -1}. Under different heating rates, the pair of DSC peaks for the bimodal exotherm of each material behaved entirely different from each other. The two peaks of the bimodal event, as well as the glass transition, can be kinetically resolved for the ground amorphous form using standard mode DSC. In contrast, similar analysis was unable to resolve the bimodal exotherm or a glass transition in the case of the cryomilled crystals. Furthermore, cryomilled crystals do not exhibit a glass transition even when analyzed using modulated DSC. Synchrotron sourced X-ray analysis revealed that grinding the amorphous material results in the nucleation and growth of the crystalline form. Milling thus induces disorder in the crystals of griseofulvin but induces order in the amorphous form of the drug. The surface of the two milled systems consistently exhibited different energetics under a wide range of relative humidity conditions. These findings suggest that cryomilling induces both bulk and surface disorder, specifically, a certain level of dislocations on the crystal. In contrast, grinding the amorphous material lowers the activation energy for crystal formation, inducing nuclei formation and growth throughout the amorphous matrix.

58 GEOSCIENCES↗

Kinetic, thermodynamic and X-ray structural insights into the interaction of melatonin and analogues with quinone reductase 2

Melatonin exerts its biological effects through at least two transmembrane G-protein-coupled receptors, MT1 and MT2, and a lower-affinity cytosolic binding site, designated MT3. MT3 has recently been identified as QR2 (quinone reductase 2) (EC 1.10.99.2) which is of significance since it links the antioxidant effects of melatonin to a mechanism of action. Initially, QR2 was believed to function analogously to QR1 in protecting cells from highly reactive quinones. However, recent studies indicate that QR2 may actually transform certain quinone substrates into more highly reactive compounds capable of causing cellular damage. Therefore it is hypothesized that inhibition of QR2 in certain cases may lead to protection of cells against these highly reactive species. Since melatonin is known to inhibit QR2 activity, but its binding site and mode of inhibition are not known, we determined the mechanism of inhibition of QR2 by melatonin and a series of melatonin and 5-hydroxytryptamine (serotonin) analogues, and we determined the X-ray structures of melatonin and 2-iodomelatonin in complex with QR2 to between 1.5 and 1.8 {angstrom} (1 {angstrom} = 0.1 nm) resolution. Finally, the thermodynamic binding constants for melatonin and 2-iodomelatonin were determined by ITC (isothermal titration calorimetry). The kinetic results indicate that melatonin is a competitive inhibitor against N-methyldihydronicotinamide (K{sub i} = 7.2 {mu}M) and uncompetitive against menadione (K{sub i} = 92 {mu}M), and the X-ray structures shows that melatonin binds in multiple orientations within the active sites of the QR2 dimer as opposed to an allosteric site. These results provide new insights into the binding mechanisms of melatonin and analogues to QR2.

59 BASIC BIOLOGICAL SCIENCES↗

Identification and Characterization of the Lipid-Binding Property of GrlR, a Locus of Enterocyte Effacement Regulator

Lipocalins are a broad family of proteins identified initially in eukaryotes and more recently in Gram-negative bacteria. The functions of lipocalin or lipid-binding proteins are often elusive and very diverse. Recently, we have determined the structure of GrlR (global regulator of LEE repressor), which plays a key role in the regulation of LEE (locus of enterocyte effacement) proteins. GrlR adopts a lipocalin-like fold that is composed of an eight-stranded e-barrel followed by an a-helix at the C-terminus. GrlR has a highly hydrophobic cavity region and could be a potential transporter of lipophilic molecules. To verify this hypothesis, we carried out structure-based analysis of GrlR, determined the structure of the lipid-GrlR complex and measured the binding of lipid to recombinant GrlR by ITC (isothermal titration calorimetry). In addition, we identified phosphatidylglycerol and phosphatidylethanolamine as the endogenously bound lipid species of GrlR using electrospray-ionization MS. Furthermore, we have shown that the lipid-binding property of GrlR is similar to that of its closest lipocalin structural homologue, e-lactoglobulin. Our studies demonstrate the hitherto unknown lipid-binding property of GrlR.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of deposition and annealing conditions on the crystallisation of NiTi thin films by e-beam evaporation

This Letter demonstrates the effects of deposition and annealing conditions on the crystallisation of nickel–titanium (NiTi) thin films deposited by the e-beam evaporation. NiTi thin films of 0.5 μm thick are fabricated on P-type (110) silicon substrates using the e-beam evaporation technique. We find that with the characterisations using the X-ray diffraction method, the results indicate that low e-beam deposition rate and argon employed annealing procedures can be beneficial to the formation of NiTi crystalline structure. Additionally, the as-deposited NiTi thin films without annealing procedures are amorphous, when deposited on the substrates at low temperatures. The differential scanning calorimetry studies show NiTi thin films formed by the e-beam evaporation are Ni-rich. Furthermore, SEM images illustrate that high-precision patterned NiTi thin film microstructures can be fabricated by combining with the e-beam evaporation and lift-off resist methods, without any wet or dry etching procedures. The proposed fabrication process for NiTi thin film microstructures shows great potential for application in shape memory alloy medical devices, as well as the micro-robotics.

36 MATERIALS SCIENCE↗

Analytical and Dielectric Studies of the Ferroelectric Ba{sub 5}Ti{sub 2}O{sub 7}Cl{sub 4}

The thermo analytic analyses are necessary for general characterization of the materials, i.e. to know if any important changes are occurring in the material. The important changes are basically of two types: 1) changes occurring as a result of chemical reaction, and 2) hanges occurring as a result of some physical change, e.g. change of crystal structure, change of some atomic groups within the given crystal structure, some physical change involving mission or absorption of thermal energy, as for example, change of electron structure or electronic interactions. The changes involving chemical reactions usually involve variation in mass content of the material system, and these changes are studied by thermo gravimetric analysis (TGA). The changes of the second type are studied by differential thermal analysis (DTA) and/or by differential scanning calorimetry (DSC). The present work reports the studies of DTA and DSC, while TGA studies showed no significant changes.

36 MATERIALS SCIENCE↗

Calculations of potential functions and thermophysical behaviors for La{sub 62}Al{sub 14}Ni{sub 12}Cu{sub 12} and Cu{sub 46}Zr{sub 44}Al{sub 7}Y{sub 3} bulk metallic glasses

Bulk metallic glasses La{sub 62}Al{sub 14}Ni{sub 12}Cu{sub 12} and Cu{sub 46}Zr{sub 44}Al{sub 7}Y{sub 3} were prepared by copper mold suction casting. The thermal-physical behaviors of bulk metallic glasses were investigated by means of x-ray diffraction, differential scanning calorimetry, ultrasonic techniques, and dilatometry. By calculating the Mie potential function from experimental data, the values of potential function powers (m and n) and related physical parameters such as the mean binding energy, etc., are obtained. Thus, unlike what some people have done by assuming values of m-n (7-14), the values of average nearest-neighbor separation r{sub 0} and effective depth of pair potential {phi}{sub 0} can be obtained from calculated values of m and n from Mie potential functions and they agree very well with the results in the literature. The calculations can be well consistent with the thermophysical behaviors by comparing the two amorphous alloys. In addition, it was enhanced that the effective depth of pair potential correlated with the glass-forming ability of bulk metallic glass.

36 MATERIALS SCIENCE↗

Effects of Severe Confinement on the Structure and Dynamics in Polymer Nanocomposites

The structure and dynamics of PEO/Na{sup +}MMT nanocomposites of various concentrations from pure polymer to pure clay have been investigated by X-Ray diffraction (XRD), Differential Scanning Calorimetry (DSC), and Quasi-elastic Neutron Scattering (QENS). XRD measurements show that at low polymer concentrations, the PEO chains form either a single- or a double-layer structure within the galleries. Further increase of the PEO content reveals only double-layers of intercalated amorphous chains and it is only for PEO content above 70 wt% that diffraction peaks are observed that can be assigned to the crystalline structure of PEO. QENS was utilized to investigate the dynamics of the intercalated PEO chains. The data for the energy-resolved elastic intensity scattered from the samples (elastic scan) show differences in the behavior of PEO in bulk and in confinement. The data for bulk PEO show the existence of dynamics between the glass transition, T{sub g}, and the melting temperature, T{sub m}, as well as an abrupt drop in the intensity at the bulk T{sub m}, whereas the data for the hybrid with 30% PEO are insensitive to the bulk T{sub m}. A jump of the bulk PEO dynamics at T{sub m} is also observed in the quasi-elastic measurements, whereas the dynamics of PEO in confinement shows only a weak temperature dependence that goes smoothly through the bulk T{sub m}, above which it is slower than that in the bulk.

36 MATERIALS SCIENCE↗

Femtosecond laser blackening of platinum

Using a femtosecond laser processing technique, we produce the black platinum with absorptance of about 95% over a broad wavelength range from ultraviolet to infrared. From scanning electron microscopy and energy dispersive x-ray spectroscopy studies, we find that the enhanced absorption of the black metal is due to a variety of nano- and microscale surface structures. Using a unique calorimetry technique, we perform a shot-to-shot comparison study of the metal absorption change in air and vacuum. Our study shows that the blackening process for platinum is more efficient in vacuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photopolymerization-induced crystallization and phase separation in poly(ethylene oxide)/triacrylate blends

The present article describes experimental and theoretical investigations of miscibility and crystallization behavior of blends of poly(ethylene oxide) (PEO) and triacrylate monomer (TA) using differential scanning calorimetry and optical microscopy. The PEO/TA blends manifested a single T{sub g} varying systematically with composition suggestive of a miscible character in their amorphous states. Moreover, there occurs melting point depression of PEO crystals with increasing TA. A phase diagram was subsequently established that exhibited a solid+liquid coexistence region bound by the liquidus and solidus lines, followed by an upper critical solution temperature (UCST) at a lower temperature. The emerging phase morphology was investigated to verify the coexistence regions. Upon photopolymerization in the isotropic melt above the melting point depression curve, both the UCST and the melting temperatures move upward and eventually surpass the reaction temperature, resulting in phase separation as well as crystallization of PEO driven by the changing supercooling, i.e., the thermodynamic driving force. Of particular interest is the interplay between photopolymerization-induced phase separation and crystallization, which eventually determines the final phase morphology of the PEO/TA blend such as crystalline lamellae, sheaf, or spherulites in isotropic liquid, phase separated domains, and viscous fingering liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the Crystalline Morphology Evolution of PET and PET/PC Blends by Time-resolved Synchrotron Small Angle X-ray Scattering (SAXS) and DSC

Isothermal melt crystallization of poly(ethylene terephthalate)(PET) and PET/PC (polycarbonate) blend, with and without a transesterification catalyst, was studied by time-resolved small-angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) in order to achieve the variation of the morphological parameters throughout the whole crystallization time. For neat PET, the catalyst promotes a decrease of the crystal lamellar thickness but for the blend no variations were observed. The effect of incorporation of catalyst in crystallization kinetics was very distinct in PET pure and the blend: in the former the catalyst leads to an increase of this kinetics while for the latter it was observed a decreasing.

36 MATERIALS SCIENCE↗

Phase transitions in Ge-Sb phase change materials

Thin films of the phase change material Ge-Sb with Ge concentrations between 7.3 and 81.1 at. % were deposited by cosputtering from elemental targets. Their crystallization behavior was studied using time-resolved x-ray diffraction, Auger electron spectroscopy, differential scanning calorimetry, x-ray reflectivity, profilometry, optical reflectivity, and resistivity versus temperature measurements. It was found that the crystallization temperature increases with Ge content. Calculations of the glass transition temperature (which is a lower limit for the crystallization temperature T{sub x}) also show an increase with Ge concentration closely tracking the measured values of T{sub x}. For low Ge content samples, Sb x-ray diffraction peaks occurred during a heating ramp at lower temperature than Ge diffraction peaks. The appearance of Ge peaks is related to Ge precipitation and agglomeration. For Ge concentrations of 59.3 at. % and higher, Sb and Ge peaks occurred at the same temperature. Upon crystallization, film mass density and optical reflectivity increase as well as electrical contrast (ratio of resistivity in amorphous phase to crystalline phase) all showed a maximum for the eutectic alloy (14.5 at. % Ge). For the alloy with 59.3 at. % Ge there was very little change in any of these parameters, while the alloy with 81.1 at. % Ge behaved opposite to a typical phase change alloy and showed reduced mass density and reflectivity and increased resistivity.

36 MATERIALS SCIENCE↗

Thermal Behaviour of W+C Ion Implanted Ultra High Molecular Weight Polyethylene (UHMWPE)

The aim of this work was to examine thermal behavior of the surface modified Ultra High Molecular Weight Poly Ethylene (UHMWPE ) in order to understand the effect of ion implantation on the properties of this polymer which is widely used especially for biomedical applications. UHMWPE samples were Tungsten and Carbon (W+C) hybrid ion implanted by using Metal Vapour Vacuum Arc (MEVVA) ion implantation technique with a fluence of 10 17 ions/cm2 and extraction voltage of 30 kV. Untreated and surface-treated samples were investigated by Rutherford Back Scattering (RBS) Analysis, Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) Spectrometry, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). This study has shown that ion implantation represents a powerful tool on modifying thermal properties of UHMWPE surfaces. This combination of properties can make implanted UHMWPE a preferred material for biomedical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Thermal Characterization of Ti+O Ion Implanted UltraHigh Molecular Weight Polyethylene (UHMWPE)

In this work, Metal-Gas Hybrid Ion Implantation technique was used as a tool for the surface modification of Ultra High Molecular Weight Polyethylene (UHMWPE). Samples were Ti+O ion implanted by using Metal-Vapour Vacuum Arc (MEVVA) ion implanter to a fluence of 5x10{sup 16} ion/cm{sup 2} for each species and extraction voltage of 30 kV. Untreated and surface treated samples were investigated by Rutherford Back Scattering (RBS) Spectrometry, Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) Spectroscopy, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Results indicate that Ti+O ion implantation can be applied on UHMWPE surfaces successfully. ATR-FTIR spectra indicate that the C-H concentration on the surface decreased after Ti+O implantation. Thermal characterization with TGA and DSC shows that polymeric decomposition temperature is shifted after ion implantation.

36 MATERIALS SCIENCE↗

Microstructures and Mechanical Properties of Tungsten Wire/Particle-Reinforced Cu{sub 48}Hf{sub 43}Al{sub 9} Bulk Metallic Glass Composites

The Cu{sub 49}Hf{sub 42}Al{sub 9} bulk metallic glass with a critical diameter of 10 mm was recently developed by J. Xu et al. We attempted to reproduce this alloy and developed Cu-Hf-Al ternary systems. The maximum critical diameter of the new bulk glassy alloy was 6 mm. The width of the supercooled liquid region {delta}Tx = Tx-Tg for this glass was 73 deg. K. To increase the toughness of these metallic glasses, the Cu{sub 48}Hf{sub 43}Al{sub 9} bulk metallic glass-forming liquid was reinforced with 50% volume fraction tungsten particles and 80% volume fraction composite with 242.4-{mu}m tungsten wire. Composites with critical diameters of 7 mm and lengths of 70 mm were synthesized. Structure, thermal stability, and microstructure of the composites were studied by X-ray diffraction, differential scanning calorimetry, and scanning electron microscope. The mechanical properties of the composites were studied in compression tests.

36 MATERIALS SCIENCE↗

Effect of Pt addition on Ni silicide formation at low temperature: Growth, redistribution, and solubility

The formation of Ni silicide during the reaction between Ni(5% Pt) and a Si(100) substrate has been analyzed by differential scanning calorimetry (DSC), in situ x-ray diffraction (XRD), cross-sectional transmission electron microscopy (TEM), and {sup 4}He{sup +} Rutherford backscattering. The DSC measurements show evidence of the Ni{sub 2}Si nucleation followed by lateral growth formation. In situ XRD and TEM have been used to investigate the sequence of formation of the silicides. These experiments show that the formations of Ni{sub 2}Si and NiSi occur simultaneously in the presence of the Pt alloy. The redistribution of platinum at different stages of the Ni silicide growth has been determined. We have estimated the solubility limit of platinum (1 at. % at 573 K) in the Ni{sub 2}Si phase by extrapolation from a measured value at 1073 K. This redistribution is explained in terms of the solubility limits and the diffusion of Pt in the Ni{sub 2}Si and NiSi phases. Pt is more likely to reside at the silicide grain boundaries and the interfaces where it can slow down the silicide growth kinetics.

36 MATERIALS SCIENCE↗

Raman spectra of Ge{sub x}As{sub y}Se{sub 1-x-y} glasses

Various Ge-As-Se glasses spanning a mean coordination number (MCN) from 2.2 to 2.94 have been investigated using differential scanning calorimetry and Raman spectroscopy. The glass transition temperature T{sub g} was found to increase with increasing MCN, except for those glasses located within the nanoscale phase-separated region of the phase diagram. The evolution of Raman features at wavenumbers from 150 to 350 cm{sup -1} exhibits two transitionlike features. Merging of the 225 and 250 cm{sup -1} modes at MCN=2.5 is a symbol of the extinction of Se-Se bonds. Additionally, the appearance of two modes at 280-290 and 170 cm{sup -1} at MCN>2.7 come from the defect modes of ethanelike Ge{sub 2}Se{sub 6/2}. The increase in the scattering from these defects is an important factor leading to enhanced optical loss in the glasses with high MCN.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Possible mechanism of charge transport and dielectric relaxation in SrO-Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3} glasses

Transparent SrBi{sub 2}B{sub 2}O{sub 7} glasses were prepared via melt-quenching technique and characterized using differential scanning calorimetry and x-ray powder diffraction. The ac conductivities of the glasses were studied as a function of frequency (100 Hz-10 MHz) at different temperatures. The frequency dependence of conductivity has been analyzed using Almond-West expression. The exponent n was nearly unaffected by temperature. Impedance and modulus spectroscopies were employed to further examine the electrical data. Dielectric relaxation exhibited a stretched exponential behavior with a stretching exponent beta independent of temperature. From conductivity analysis we have proposed that the charge transport occurs through the participation of nonbridging oxygen (NBO), which switches positions in a facile manner. The stretched exponential behavior appears to be a direct consequence of the NBO switching mechanism of charge transport.

36 MATERIALS SCIENCE↗