Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ABLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

A Self-Limiting Electro-Ablation Technique for the Top-Down Synthesis of Large-Area Monolayer Flakes of 2D Materials

We report the discovery of an electrochemical process that converts two dimensional layered materials of arbitrary thicknesses into monolayers. The lateral dimensions of the monolayers obtained by the process within a few seconds time at room temperature were as large as 0.5 mm. The temporal and spatial dynamics of this physical phenomenon, studied on MoS2 flakes using ex-situ AFM imaging, Raman mapping, and photoluminescence measurements trace the origin of monolayer formation to a substrate-assisted self-limiting electrochemical ablation process. Electronic structure and atomistic calculations point to the interplay between three essential factors in the process: (1) strong covalent interaction of monolayer MoS2 with the substrate; (2) electric-field induced differences in Gibbs free energy of exfoliation; (3) dispersion of MoS2 in aqueous solution of hydrogen peroxide. This process was successful in obtaining monolayers of other 2D transition metal dichalcogenides, like WS2 and MoTe2 as well.

36 MATERIALS SCIENCE↗

Standoff Detection of Uranium and its Isotopes by Femtosecond Filament Laser Ablation Molecular Isotopic Spectrometry

The ability to perform not only elementally but also isotopically sensitive detection and analysis at standoff distances is important for remote sensing applications in diverse ares, such as nuclear nonproliferation, environmental monitoring, geophysics, and planetary science. We demonstrate isotopically sensitive real-time standoff detection of uranium by the use of femtosecond filament-induced laser ablation molecular isotopic spectrometry. A uranium oxide molecular emission isotope shift of 0.05 ± 0.007 nm is reported at 593.6 nm. We implement both spectroscopic and acoustic diagnostics to characterize the properties of uranium plasma generated at different filament- uranium interaction points. The resulting uranium oxide emission exhibits a nearly constant signal-to-background ratio over the length of the filament, unlike the uranium atomic and ionic emission, for which the signal-to-background ratio varies significantly along the filament propagation. This is explained by the different rates of increase of plasma density and uranium oxide density along the filament length resulting from spectral and temporal evolution of the filament along its propagation. Lastly, the results provide a basis for the optimal use of filaments for standoff detection and analysis of uranium isotopes and indicate the potential of the technique for a wider range of remote sensing applications that require isotopic sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser-ablation sampling for inductively coupled plasma distance-of-flight mass spectrometry

An inductively coupled plasma distance-of-flight mass spectrometer (ICP-DOFMS) has been coupled with laser-ablation (LA) sample introduction for the elemental analysis of solids. ICP-DOFMS is well suited for the analysis of laser-generated aerosols because it offers both high-speed mass analysis and simultaneous multi-elemental detection. Here, we evaluate the analytical performance of the LA-ICP-DOFMS instrument, equipped with a microchannel plate-based imaging detector, for the measurement of steady-state LA signals, as well as transient signals produced from single LA events. Steady-state detection limits are 1 mg g1, and absolute single-pulse LA detection limits are 200 fg for uranium; the system is shown capable of performing time-resolved single-pulse LA analysis. By leveraging the benefits of simultaneous multi-elemental detection, we also attain a good shot-to-shot reproducibility of 6% relative standard deviation (RSD) and isotope-ratio precision of 0.3% RSD with a 10 s integration time.

Gundlach-Graham, Alexander W.↗

Characterization of extreme ultraviolet laser ablation mass spectrometry for actinide trace analysis and nanoscale isotopic imaging

The purpose of this research was to characterize Extreme Ultraviolet Time-of-Flight (EUV TOF) Laser Ablation Mass Spectrometry for high spatial resolution elemental and isotopic analysis. We compare EUV TOF results with Secondary Ionization Mass Spectrometry (SIMS) to orient the EUV TOF method within the overall field of analytical mass spectrometry. Using the well-characterized NIST 61x glasses, we show that the EUV ionization approach produces relatively few molecular ion interferences in comparison to TOF SIMS. We demonstrate that the ratio of element ion to element oxide ion is adjustable with EUV laser pulse energy and that the EUV TOF instrument has a sample utilization efficiency of 0.014%. The EUV TOF system also achieves a lateral resolution of 80 nm and we demonstrate this lateral resolution with isotopic imaging of closely spaced particles or uranium isotopic standard materials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gas-phase oxidation and nanoparticle formation in multi-element laser ablation plumes

The evolution from gas-phase oxidation to nanoparticle and agglomerate formation was studied in nanosecond laser-produced plasmas of a multi-principal element alloy target in air. Here gas-phase oxidation of plasma species was monitored in situ via optical emission spectroscopy, while a custom-built single particle mass spectrometer was used to measure size and compositions of agglomerated nanoparticles formed in laser ablation plumes. Ex situ analysis employing transmission electron microscopy was used to study nanoparticle morphology, crystal structure, and element distribution at the nanoscale. Emission spectra indicate that gas-phase oxidation of elements in the alloy target are formed at varying times during plume evolution, and mass spectrometry results indicate fractal agglomerates contain all principal alloying elements and their oxides. Finally, electron microscopy characterization illustrates that these agglomerates consist of multiple material types: sub-10 nm diameter amorphous, multi-element nanoparticles, ≈10–30 nm diameter Ti-rich crystalline oxide nanoparticles, and ejected base material. Results highlight that the multi-component target composition impacts molecular formation in the gas phase and the morphology, composition, and structure of nanoparticles and agglomerates formed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Informing air–carbon ablation modeling with theoretical calculations of atomic oxygen and nitrogen interacting with carbon surfaces

To understand the gas–surface chemistry above the thermal protection system of a hypersonic vehicle, it is necessary to map out the kinetics of key elementary reaction steps. In this work, extensive periodic density functional theory (DFT) calculations are performed to elucidate the interaction of atomic oxygen and nitrogen with both the basal plane and edge sites of highly oriented pyrolytic graphite (HOPG). Reaction energies and barriers are determined for adsorption, desorption, diffusion, recombination, and several reactions. These DFT results are compared with the most recent finite-rate model for air–carbon ablation. Our DFT results corroborated some of the parameters used in the model but suggest that further refinement may be necessary for others. The calculations reported here will help to establish a predictive kinetic model for the complex reaction network present under hypersonic flight conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatiotemporal characterization of cerium monoxide in laser ablation plasmas using spectrally-resolved fast-gated imaging

The impact of oxidation chemistry on the emission characteristics and spatial structure of laser-produced Ce metal plasmas was investigated using laser-induced breakdown spectroscopy (LIBS) and time-resolved fast-gated imaging employing narrowband optical filters. Images of the plasma emission show that CeO coexists with atomic species in the periphery and vortex ring of the plasma plume. Image processing was also applied to combine independent monochromatic images of the plasma emission into a single merged image, culminating in a timelapse on the spatiotemporal evolution of atomic and molecular species within the plasma plume. The formation of CeO species was observed to proceed faster for plasmas generated in atmospheres containing larger concentrations of oxygen based on ratios of CeO-to-atomic emission intensities. Furthermore, these same ratios were shown to plateau and decrease at later times (≥25 μs), potentially indicating the depletion of CeO number densities in the plasma as the monoxide undergoes reactions to form higher polyatomic oxides. Altogether, these results provide fundamental insights into the chemical dynamics and intermixing between plasma-gas species in laser ablation cerium plasmas, advancing our understanding on optical signatures of nuclear-relevant materials to enable in-field measurement capabilities.

47 OTHER INSTRUMENTATION↗

Design of a streaked radiography instrument for ICF ablator tuning measurements

A streaked radiography diagnostic has been proposed as a technique to determine the ablator mass remaining in an inertial confinement fusion ignition capsule at peak velocity. This instrument, the 'HXRI-5', has been designed to fit within a National Ignition Facility Diagnostic Instrument Manipulator. The HXRI-5 will be built at Sandia National Laboratories (SNL), and initial testing will be done at the SNL Z-Beamlet Facility. In this paper, we will describe the National Ignition Campaign requirements for this diagnostic, the instrument design, and the planned test experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermal Ablation by High-Intensity-Focused Ultrasound Using a Toroid Transducer Increases the Coagulated Volume and Allows Coagulation Near Portal and Hepatic veins in Pigs

A new geometry of HIFU transducer is described to enlarge the coagulated volume. The geometry of the transducer was not spherical. The surface of the transducer was built based on a toroid geometry. The transducer was generated by the revolution of a circle about an axis lying in its plane. Eight emitters operating at a frequency of 3 MHz were diced out of a single toroid piezocomposite element. Each of the eight emitters was divided into 32 transducers. The focal zone is conical and located at 70 mm from the transducer. A 7.5 MHz ultrasound imaging probe is placed in the centre of the device for guiding the treatment. Our long-term objective is to develop a device that can be used during surgery. In vivo trials have been performed on 13 pigs to demonstrate this new principle and to evaluate the vascular tolerance of the treatment. This new geometry combined with consecutive activation of the eight emitters around the toroid allows achieving a mean thermal ablation of 7.0{+-}2.5 cm3 in 40 seconds. All lesions were visible with high contrast on sonograms. The correlation between the size of lesions observed on sonograms and during gross examination was 92%. This allows the user to easily enlarge the coagulated volume by juxtaposing single lesions. The pigs tolerate the treatment well over the experimental period even when coagulation was produced through portal and/or hepatic veins.

60 APPLIED LIFE SCIENCES↗

Note: Low density and long plasma channels generated by laser transversely ignited ablative capillary discharges

A technique is developed to reduce the jitter associated with ablative capillary discharges. A laser pulse propagating perpendicularly to the axis of the capillary and focused onto a copper wire creates a plasma that initiates the discharge. This transverse laser ignition method has several advantages over previous techniques employing a laser pulse collinear with the capillary, including increased capillary lifetime and simpler arrangement of the igniting and the driving pulses for laser-wakefield acceleration. Using this technique long, low density plasma channels are produced with low jitter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser ablated zirconium plasma: A source of neutral zirconium

The authors report spectroscopic investigations of laser produced zirconium (Zr) plasma at moderate laser fluence. At low laser fluence the neutral zirconium species are observed to dominate over the higher species of zirconium. Laser induced fluorescence technique is used to study the velocity distribution of ground state neutral zirconium species. Two-dimensional time-resolved density distributions of ground state zirconium is mapped using planner laser induced fluorescence imaging and total ablated mass of neutral zirconium atoms is estimated. Temporal and spatial evolutions of electron density and temperature are discussed by measuring Stark broadened profile and ratio of intensity of emission lines, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spike deceleration and bubble acceleration in the ablative Rayleigh-Taylor instability

The nonlinear evolutions of the Rayleigh-Taylor instability (RTI) with preheat is investigated by numerical simulation (NS). A new phase of the spike deceleration evolution in the nonlinear ablative RTI (ARTI) is discovered. It is found that nonlinear evolution of the RTI can be divided into the weakly nonlinear regime (WNR) and the highly nonlinear regime (HNR) according to the difference of acceleration velocities for the spike and the bubble. With respect to the classical RTI (i.e., without heat conduction), the bubble first accelerates in the WNR and then decelerates in the HNR while the spike holds acceleration in the whole nonlinear regime (NR). With regard to the ARTI, on the contrary, the spike first accelerates in the WNR and then decelerates in the HNR while the bubble keeps acceleration in the whole NR. The NS results indicate that it is the nonlinear overpressure effect at the spike tip and the vorticity accumulation inside the bubble that lead to, respectively, the spike deceleration and bubble acceleration, in the nonlinear ARTI. In addition, it is found that in the ARTI the spike saturation velocity increases with the perturbation wavelength.

36 MATERIALS SCIENCE↗

Formation of large-scale structures in ablative Kelvin-Helmholtz instability

In this research, we studied numerically nonlinear evolutions of the Kelvin-Helmholtz instability (KHI) with and without thermal conduction, aka, the ablative KHI (AKHI) and the classical KHI (CKHI). The second order thermal conduction term with a variable thermal conductivity coefficient is added to the energy equation in the Euler equations in the AKHI to investigate the effect of thermal conduction on the evolution of large and small scale structures within the shear layer which separate the fluids with different velocities. The inviscid hyperbolic flux of Euler equation is computed via the classical fifth order weighted essentially nonoscillatory finite difference scheme and the temperature is solved by an implicit fourth order finite difference scheme with variable coefficients in the second order parabolic term to avoid severe time step restriction imposed by the stability of the numerical scheme. As opposed to the CKHI, fine scale structures such as the vortical structures are suppressed from forming in the AKHI due to the dissipative nature of the second order thermal conduction term. With a single-mode sinusoidal interface perturbation, the results of simulations show that the growth of higher harmonics is effectively suppressed and the flow is stabilized by the thermal conduction. With a two-mode sinusoidal interface perturbation, the vortex pairing is strengthened by the thermal conduction which would allow the formation of large-scale structures and enhance the mixing of materials. In summary, our numerical studies show that thermal conduction can have strong influence on the nonlinear evolutions of the KHI. Thus, it should be included in applications where thermal conduction plays an important role, such as the formation of large-scale structures in the high energy density physics and astrophysics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduced ablative Rayleigh-Taylor growth measurements in indirectly driven laminated foils

Indirectly driven, ablative Rayleigh-Taylor instability growth measurements in Ge-doped plastic foils were studied using face-on and side-on x-ray radiography. Laminated samples consisting of alternating layers of Ge-doped and undoped plastic and homogeneous Ge-doped foils were considered. We show for the first time that hydrodynamics do not depend upon structuration of the samples and that stabilization occurs in the case of laminated samples. All data were found to be in good agreement with bi-dimensional hydrosimulations based on theoretical and numerical predictions published earlier [L. Masse, Phys. Rev. Lett. 98, 245001 (2007)], encouraging new designs using laminated structures for ignition capsules.

36 MATERIALS SCIENCE↗

Laser wakefield acceleration of electron beams beyond 1 GeV from an ablative capillary discharge waveguide

Laser wakefield acceleration of electrons well beyond 1 GeV and optical guiding of ultraintense laser pulses of peak powers up to 160 TW over a 4-cm long ablative capillary discharge plasma channel were experimentally demonstrated. Electron beams, with energies up to 1.8 GeV, were generated by using the 130 TW, 55 fs driving laser pulses. A comparison of oxygen-containing acrylic resin (C:O:H = 4:2:7) capillary and no oxygen-containing polyethylene (C:O:H = 1:0:2) capillary measurements suggests that the injection of electron into the laser wakefield is assisted by the ionization of oxygen K-shell electrons.

43 PARTICLE ACCELERATORS↗

Spatio-temporal mapping of ablated species in ultrafast laser-produced graphite plasmas

We studied the spatial and temporal distributions of ionic, neutral, and molecular species generated by femtosecond laser produced plasma under varying ambient nitrogen gas pressures. Plasmas were generated by irradiating planar graphite targets using 40 fs pulses of 800 nm radiation from a Ti:Sapphire laser. The results show that in the presence of an ambient gas, the molecular species spatial extension and lifetime are directly correlated to the evolution of excited ions. The present studies also provide valuable insights into the evolution history of various species and their excitation during ultrafast laser ablation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗