Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “three body”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

The EET Horizontal Tails Investigation and the EET Lateral Controls Investigation

In the energy efficient transport (EET) Horizontal Tails Investigation, aerodynamic data were measured for five different horizontal tails on a full span model with a wide body fuselage. Three of the horizontal tails were low tail configurations and two were T tail configurations. All tails were tested in conjunction with two wings, a current wide body wing and a high aspect ratio supercritical wing. Local downwash angles and dynamic pressures in the vicinity of the tails were measured using a yaw head rake. The results provide a comparison of the aerodynamic characteristics of the two wing configurations at trimmed conditions for Mach numbers between 0.60 and 0.90. In the EET Lateral Controls Investigation, the control effectiveness of a conventional set of lateral controls was measured over a Mach number range from 0.60 to 0.90 on a high aspect ratio supercritical wing semispan model. The conventional controls included a high speed aileron, a low speed aileron, and six spoiler segments. The wing was designed so that the last 25% of the chord is removable to facilitate testing of various control systems. The current status and an indication of the data obtained in these investigations are presented.

Jacobs, P. F.↗
NASA NTRS1995

Low-speed wind tunnel investigation of the stability and control characteristics of a series of flying wings with sweep angles of 60 deg

A wind tunnel investigation was conducted in the Langley 12-Foot Low-Speed Wind Tunnel to study the low-speed stability and control characteristics of a series of four flying wings over an extended range of angle of attack (-8 deg to 48 deg). Because of the current emphasis on reducing the radar cross section of new military aircraft, the planform of each wing was composed of lines swept at a relatively high angle of 60 deg, and all the trailing-edge lines were aligned with one of the two leading edges. Three arrow planforms with different aspect ratios and one diamond planform were tested. The models incorporated leading-edge flaps for improved pitching-moment characteristics and lateral stability and had three sets of trailing-edge flaps that were deflected differentially for roll control, symmetrically for pitch control, and in a split fashion for yaw control. Top bodies of three widths and twin vertical tails of various sizes and locations were also tested on each model. A large aerodynamic database was compiled that could be used to evaluate some of the trade-offs involved in the design of a configuration with a reduced radar cross section and good flight dynamic characteristics.

Moul, Thomas M.↗
NASA NTRS1983

Effects of weightlessness on body composition in the rat

The effects of weightlessness on the body composition of rats were investigated using 5 male rats exposed to 18.5 days of weightlessness on the COSMOS 1129 biosatellite and killed after reentry. The animals were immediately dissected and the three major body divisions (musculoskeletal system, skin, and pooled viscera) were analyzed for fat, water, solids, and six elements. These results were determined as percentages of the fat-free body or its components and then compared with two groups of terrestrial controls, one of which was subjected to a flight simulation in a spacecraft mock-up while the other was under standard vivarium conditions. Compared with the control groups, the flight group was found to exhibit a reduced fraction of total body water, a net shift of body water from skin to viscera, a marked diminution in the fraction of extracellular water in the fat-free body, a marked reduction in the fraction of bone mineral, no change in the quantity of stored fat or adrenal masses, and a net increase in total muscle mass as indicated by total body creatine, protein, and body cell mass.

Pitts, G. C.↗
NASA NTRS1991

Theoretical studies of molecular collisions

The following subject areas are covered: (1) total integral reactive cross sections and vibrationally resolved reaction probabilities for F + H2 = HF + H; (2) a theoretical study of inelastic O + N2 collisions; (3) body frame close coupling wave packet approach to gas phase atom-rigit rotor inelastic collisions; (4) wave packet study of gas phase atom-rigit motor scattering; (5) the application of optical potentials for reactive scattering; (6) time dependent, three dimensional body frame quantal wave packet treatment of the H + H2 exchange reaction; (7) a time dependent wave packet approach to atom-diatom reactive collision probabilities; (8) time dependent wave packet for the complete determination of s-matrix elements for reactive molecular collisions in three dimensions; (9) a comparison of three time dependent wave packet methods for calculating electron-atom elastic scattering cross sections; and (10) a numerically exact full wave packet approach to molecule-surface scattering.

Kouri, Donald J.↗
NASA NTRS1979

Feasibility study for a numerical aerodynamic simulation facility. Volume 2: Hardware specifications/descriptions

An FMP (Flow Model Processor) was designed for use in the Numerical Aerodynamic Simulation Facility (NASF). The NASF was developed to simulate fluid flow over three-dimensional bodies in wind tunnel environments and in free space. The facility is applicable to studying aerodynamic and aircraft body designs. The following general topics are discussed in this volume: (1) FMP functional computer specifications; (2) FMP instruction specification; (3) standard product system components; (4) loosely coupled network (LCN) specifications/description; and (5) three appendices: performance of trunk allocation contention elimination (trace) method, LCN channel protocol and proposed LCN unified second level protocol.

Green, F. M.↗
NASA NTRS2021

3D Shape Reconstruction of Small Bodies from Sparse Features

The autonomous approach of spacecraft to a small body (comet or asteroid) relies on using all available information at each phase of the approach. This paper presents new algorithms for global shape reconstructions from sparse tracked surface points. These methods leverage estimates from earlier phases, such as rotation pole, as well as a priori knowledge, such as a genus-0 body (i.e. without boundaries or topological holes). A mapping algorithm is proposed, which performs faithful reconstructions while enforcing genus-0 output through spherical parameterization. To estimate the shape of permanently shadowed regions of the body, a symmetry reconstruction method is added to the reconstruction algorithms. This method is shown to substantially increase the reconstruction accuracy but is subject to the symmetry of the body perpendicular to the rotation pole. The proposed mapping algorithm is compared to stateof- the-practice surface reconstruction algorithms, assessing their accuracy and ability to correctly generate genus-0 shape models for 2400 datasets and three small bodies. The proposed spherical parameterization algorithm performed consistently with the state-of-the-practice while being the only algorithm to always produce genus-0 shape models.

Nesnas, Issa↗
NASA NTRS1970

Performance characteristics of the lifting body vehicle

Designers have relied heavily upon aerodynamic theory and wind-tunnel testing of large and small models to obtain accurate estimates of the performance characteristics for a new configuration and to provide a realistic simulation of the vehicle’s flying characteristics before its first flight, However, the highly unusual shapes of the lifting body vehicles have raised some questions of how accurately their lift and drag characteristics could be defined with these prediction techniques. Thus it is pertinent to com- pare the lift and drag data obtained in flight for three lifting body vehicles (ref. 1 and unpublished results) with wind-tunnel measurements obtained on the actual flight vehicles (refs. 2 and 3 and unpublished results) and on small-scale models of the flight vehicles (ref. 4 and unpublished results). These comparisons, together with discussions of separated flow problems and the effects of ablated surfaces, should be useful to the designers of space shuttlecraft.

Jon S Pyle↗
NASA NTRS1991

Hierarchic models for laminated plates

Structural plates and shells are three-dimensional bodies, one dimension of which happens to be much smaller than the other two. Thus, the quality of a plate or shell model must be judged on the basis of how well its exact solution approximates the corresponding three-dimensional problem. Of course, the exact solution depends not only on the choice of the model but also on the topology, material properties, loading and constraints. The desired degree of approximation depends on the analyst's goals in performing the analysis. For these reasons models have to be chosen adaptively. Hierarchic sequences of models make adaptive selection of the model which is best suited for the purposes of a particular analysis possible. The principles governing the formulation of hierarchic models for laminated plates are presented. The essential features of the hierarchic models described models are: (1) the exact solutions corresponding to the hierarchic sequence of models converge to the exact solution of the corresponding problem of elasticity for a fixed laminate thickness; and (2) the exact solution of each model converges to the same limit as the exact solution of the corresponding problem of elasticity with respect to the laminate thickness approaching zero. The formulation is based on one parameter (beta) which characterizes the hierarchic sequence of models, and a set of constants whose influence was assessed by a numerical sensitivity study. The recommended selection of these constants results in the number of fields increasing by three for each increment in the power of beta. Numerical examples analyzed with the proposed sequence of models are included and good correlation with the reference solutions was found. Results were obtained for laminated strips (plates in cylindrical bending) and for square and rectangular plates with uniform loading and with homogeneous boundary conditions. Cross-ply and angle-ply laminates were evaluated and the results compared with those of MSC/PROBE. Hierarchic models make the computation of any engineering data possible to an arbitrary level of precision within the framework of the theory of elasticity.

Actis, Ricardo Luis↗
NASA NTRS2013

Postural Responses Following Space Flight and Ground Based Analogs

With the transition from the Shuttle program to the International Space Station (ISS), the opportunity to fly sensorimotor experiments in a weightless environment has become increasingly more difficult to obtain. As a result, more investigations have turned to ground-based analogs as a way of evaluating an experiment's viability. The two primary analogs available to most investigators are 6deg head down bed rest (HDBR) and dry immersion (DI). For the time being, HDBR investigations have been associated with studies conducted in the United States while the Russians and several other European Union states have concentrated their efforts on using DI as the space flight analog of choice. While either model may be viable for cardiovascular, bone and other system changes, vestibular and sensorimotor investigators have retained serious reservations of either analog's potential to serve as a replacement for a true weightless environment. These reservations have merit, but it is worthwhile to consider that not all changes associated with sensorimotor function during space flight are the result of top-down modifications, but may also be due to the lack, or change, of appropriate support surfaces applying force to the bottom of the feet. To this end we have compared quiet stance postural responses between short duration Space Shuttle flights, long duration ISS flights and HDBR of varying duration. Using these three platforms, representing different modifications of support we investigated postural ataxia using a quiet stance model. Quiet stance was obtained by asking the subjects to stand upright on a force plate, eyes open, arms at the side of the body for three min. From the force plate we obtained average sway velocity in two axes as well as length of line (stabilogram). These parameters were then related to EMG activity recorded from the medial gastrocnemius and lateral tibialis. It is significant to note that postural ataxia measured as quiet stance shows analogous changes between HDBR and space flight. Primary differences across short duration, long duration space flight and HDBR are related to the length of exposure associated with both space flight and HDBR.

Kofman, Igor S.↗
NASA NTRS1998

Global Artificial Boundary Conditions for Computation of External Flow Problems with Propulsive Jets

We propose new global artificial boundary conditions (ABC's) for computation of flows with propulsive jets. The algorithm is based on application of the difference potentials method (DPM). Previously, similar boundary conditions have been implemented for calculation of external compressible viscous flows around finite bodies. The proposed modification substantially extends the applicability range of the DPM-based algorithm. In the paper, we present the general formulation of the problem, describe our numerical methodology, and discuss the corresponding computational results. The particular configuration that we analyze is a slender three-dimensional body with boat-tail geometry and supersonic jet exhaust in a subsonic external flow under zero angle of attack. Similarly to the results obtained earlier for the flows around airfoils and wings, current results for the jet flow case corroborate the superiority of the DPM-based ABC's over standard local methodologies from the standpoints of accuracy, overall numerical performance, and robustness.

Tsynkov, Semyon↗
DOE OSTI2022

Benchmark calculations of infinite neutron matter with realistic two- and three-nucleon potentials

In this study, we present the equation of state of infinite neutron matter as obtained from highly realistic Hamiltonians that include nucleon-nucleon and three-nucleon coordinate-space potentials. We benchmark three independent many-body methods: Brueckner-Bethe-Goldstone (BBG), Fermi hypernetted chain/single-operator chain (FHNC/SOC), and auxiliary-field diffusion Monte Carlo (AFDMC). We find them to provide similar equations of state when the Argonne v 18 and the Argonne v' 6 nucleon-nucleon potentials are used in combination with the Urbana IX three-body force. Only at densities larger than about 1.5 the nuclear saturation density ( ρ 0 =0.16 fm ⁻3 ) the FHNC/SOC energies are appreciably lower than the other two approaches. The AFDMC calculations carried out with all of the Norfolk potentials fitted to reproduce the experimental trinucleon ground-state energies and nd doublet scattering length yield unphysically bound neutron matter, associated with the formation of neutron droplets. Including tritium β decay in the fitting procedure, as in the second family of Norfolk potentials, mitigates but does not completely resolve this problem. An excellent agreement between the BBG and AFDMC results is found for the subset of Norfolk interactions that do not make neutron-matter collapse, while the FHNC/SOC equations of state are moderately softer.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1996

Satellite Angular Rate Estimation From Vector Measurements

This paper presents an algorithm for estimating the angular rate vector of a satellite which is based on the time derivatives of vector measurements expressed in a reference and body coordinate. The computed derivatives are fed into a spacial Kalman filter which yields an estimate of the spacecraft angular velocity. The filter, named Extended Interlaced Kalman Filter (EIKF), is an extension of the Kalman filter which, although being linear, estimates the state of a nonlinear dynamic system. It consists of two or three parallel Kalman filters whose individual estimates are fed to one another and are considered as known inputs by the other parallel filter(s). The nonlinear dynamics stem from the nonlinear differential equation that describes the rotation of a three dimensional body. Initial results, using simulated data, and real Rossi X ray Timing Explorer (RXTE) data indicate that the algorithm is efficient and robust.

Azor, Ruth↗
NASA NTRS1982

Holographic interferometry and tomography at Ames Research Center

A YAG laser holographic interferometer system and reconstruction laboratory for the Ames 2- by 2-Foot Transonic Wind Tunnel are discussed. This system provides dual plate and double pulse holography for quantitative and qualitative measurements, respectively. Interferometric measurements of two-dimensional airfoils and three-dimensional bodies of revolution for a tomography feasibility study were made. The two-dimensional work included supercritical airfoils, an oscillating airfoil undergoing dynamic stall, and a circulation control airfoil. The tomography experiments centered around hemispherical nose and tangent ogive models. In addition, the tomography work covered the development of a Fourier transform code for the retrieval of the three dimensional density distributions from the interferograms.

Lee, G.↗
NASA NTRS1998

User's Manual for FEMOM3DR

FEMoM3DR is a computer code written in FORTRAN 77 to compute radiation characteristics of antennas on 3D body using combined Finite Element Method (FEM)/Method of Moments (MoM) technique. The code is written to handle different feeding structures like coaxial line, rectangular waveguide, and circular waveguide. This code uses the tetrahedral elements, with vector edge basis functions for FEM and triangular elements with roof-top basis functions for MoM. By virtue of FEM, this code can handle any arbitrary shaped three dimensional bodies with inhomogeneous lossy materials; and due to MoM the computational domain can be terminated in any arbitrary shape. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computers on which the code is intended to run.

Reddy, C. J.↗
NASA NTRS2017

United Kingdom Infrared Telescope's Spectrograph Observations of Human-Made Space Objects

Presented here are the results of the United Kingdom Infrared Telescope (UKIRT) spectral observations of human-made space objects taken from 2014 to 2015. The data collected using the UKIRT 1-5 micron Imager Spectrometer (UIST) cover the wavelength range 0.7-2.5 micrometers. Overall, data were collected on 18 different orbiting objects at or near geosynchronous orbit (GEO). Two of the objects are controlled spacecraft, twelve are non-controlled spacecraft, one is a rocket body, and three are cataloged as debris. The remotely collected data are compared to the laboratory-collected reflectance data on typical spacecraft materials; thereby general materials are identified but not specific types. These results highlight the usefulness of observations in the infrared by focusing on features from hydrocarbons and silicon. The spacecraft, both the controlled and non-controlled, show distinct features due to the presence of solar panels whereas the rocket bodies do not. Signature variations between rocket bodies, due to the presence of various metals and paints on their surfaces, show a clear distinction from those objects with solar panels, demonstrating that one can distinguish most spacecraft from rocket bodies through infrared spectrum analysis. Finally, the debris pieces tend to show featureless, dark spectra. These results show that the laboratory data in its current state give well-correlated indications as to the nature of the surface materials on the objects. Further telescopic data collection and model updates to include noise, surface roughness, and material degradation are necessary to make better assessments of orbital object material types. A comparison conducted between objects observed previously with the NASA Infrared Telescope Facility (IRTF) shows similar materials and trends from the two telescopes and different times. However, based on the current state of the model, infrared spectroscopic data are adequate to classify objects in GEO as spacecraft, rocket bodies, or debris.

Buckalew, Brent↗
NASA NTRS1990

Comparison of three-dimensional nonequilibrium PNS codes

A comparison study has been conducted using four recently developed parabolized Navier-Stokes (PNS) codes which have the capability of predicting finite-rate, chemically reacting flows over three-dimensional bodies. These are the (1) UPS code, (2) the STUFF code, (3) the TONIC code, and (4) the VRA-PNS code. All of the codes use the same seven-species, single-temperature air chemistry model, but otherwise they are unique, with different capabilities and characteristics. The differences include upwinding vs central differencing, strongly-coupled vs weakly-coupled chemistry, shock capturing vs shock fitting, finite volume vs finite difference, and full PNS vs thin-layer PNS equations. Three test cases were utilized to compare the codes. The comparisons presented indicate a good agreement among the codes tested.

Buelow, Philip E.↗