Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technical report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Low-Cost, High-Performance Carbon Fiber for Compressed Natural Gas Storage Tanks (Final Technical Report – Down Select Report)

The aim of this project is to reduce the cost of Type IV, carbon fiber (CF) composite overwrap compressed gas storage tanks by reducing the cost of CF and CF composites. The project team worked to reduce the cost of CF by exploring and testing opportunities for a low-cost alternative precursor material for CF production to supplant market-dominant and costly polyacrylonitrile (PAN). Concurrently, the team aimed to reduce the cost of the tanks at the composite level by improving the interfacial adhesion between the fibers and the matrix resin through the incorporation of low-cost nanoparticles recycled from waste materials, which would reduce the volume of costly CF required to achieve the same tank performance. At the end of the first year, the project team selected mesophase pitch as the primary precursor candidate from a field of materials based on the superior mechanical performance and cost-saving potential. During the second year, the team produced CFs derived from mesophase pitch achieving an average tensile strength of 365.6 ksi and average tensile modulus of 40.74 Msi. Facility availability for spinning and converting these fibers at greater scale has hindered scale-up demonstration, but the team has identified opportunities to conduct this work in the near term. Cost modeling shows that these mesophase pitch-derived CFs can be up to 40% less expensive than PAN-derived CFs due to the lower cost of the feedstock material, higher throughput, greater conversion yield, and lower cost spinning method and compared to PAN. Additionally, the team has demonstrated at lab-scale that nanoparticle coating CFs can significantly increase the interfacial shear strength and load transfer efficiency of CFs in a matrix. Single filament pull-out testing showed a 27% average increase in max interfacial shear strength due to this coating. A continuous method of applying these coatings to a tow of CF has been developed for scale-up. 26 m tows of coated CFs were produced using this system and formed into composite ring samples for ASTM ring burst testing. Issues with the testing protocol have limited assessment of these results. A prototype Type IV tank was designed to meet ANSI HGV2 standards, and the design criteria set out by DOE, using the CF properties developed by the team paired with a proprietary resin matrix, a polyamide liner, and aluminum end bosses. The tank weighs 153.1 kg and with a total capacity of 5.8 kg H2 (5.6 kg usable), which yields a gravimetric capacity of 1.17 kWh/kg. Cost modeling predicts that the tank will have a projected cost of $15.73/kWh. Tank performance modeling does not include considerations for fiber-matrix load transfer efficiency improvements offered by nanoparticle coating method.

08 HYDROGEN↗
DOE OSTI2024

High Temperature Additive Architectures for 65% Efficiency (Final Technical Report)

This project aimed to develop advanced high-temperature additive components that contribute towards the DOE’s goal for advanced gas turbines that are capable of at least 65% efficiency in combined cycle application. The objective was to leverage state-of-the-art additive manufacturing to develop an innovative stage 1 turbine nozzle (S1N) that can provide cooling flow savings while maintaining the component durability expected in today’s gas turbines. The program had two phases. Phase I was a conceptual phase for novel advanced cooling designs enabled by additive manufacturing, as well as proposals for validation. Phase II included execution of the Phase I conceptual design, including manufacturing of prototype hardware and validation within an environment that is similar to engine operation. During Phase I of the program, the team devised a concept to reduce cooling air usage. The cooling air used in the side walls is filmed out along the side walls, while the cooling air used in the airfoil is eventually directed to near-wall channels and exits holes along the airfoil trailing end. During this program, the team performed additive trials to analyze the geometric limitations of additive manufacturing. This helped the team understand minimum wall thicknesses, hole sizes, and cooling channel dimensions among other limits. Phase II of this program pushed GE Vernova beyond its previous experience of designing and manufacturing an additively manufactured hot gas path component. Modern hot gas path components utilize material chemistries that are traditionally hard to weld, such as cast Renè 108, and exhibit solidification cracking when additively manufactured using Direct Metal Laser Melting (DMLM). Note that AM108 is a powder form of Renè 108. A S1N with advanced cooling is larger and more complex than parts previously built by additive manufacturing and required new learnings to resolve risks around solidification cracking. Finally, the team validated the design in a combustion rig that replicated operation in a gas turbine. In order to properly quantify the benefits of the new additive design, a baseline was also tested in the rig and operated under the same conditions. In addition, an uncertainty analysis was done to quantify any sources of error that could impact the results. At the end of the validation effort, it was determined that the additive nozzle exceeded the 15% reduction in cooling flow goal even with the worst-case assumptions for uncertainty.

03 NATURAL GAS↗
DOE OSTI2025

Testing mechanisms of how mycorrhizal associations affect forest soil carbon and nitrogen cycling (Final Technical Report)

Trees are in a symbiotic partnership with mycorrhizal fungi in which they provide the fungi with carbon from photosynthesis and the fungi provide the trees with nutrients and water. In temperate forests, the vast majority of trees form symbioses with one of two types of mycorrhizal fungi—arbuscular mycorrhizal (AM) fungi or ectomycorrhizal (EcM) fungi. These fungi differ in their morphology, hyphal length, and nutrient acquisition strategies. Many studies have found systematic differences in soil organic matter and nitrogen availability between forest stands dominated by AM-associating trees versus EcM-associating trees. For instance, there is a larger proportion of organic matter that is mineral-associated, more available nitrogen, and lower soil carbon to nitrogen ratios in AM forest stands relative to EcM forests stands. However, the mechanisms driving these patterns are not known, which complicates our ability to model soil organic matter dynamics in forested ecosystems. The main objective of this research was to understand the degree to which the observed differences in soil C and N dynamics between AM and EcM dominated forests are driven by tree traits like litter decomposability and root exudation versus mycorrhizal fungal nutrient acquisition strategies. We investigated these mechanisms using observations and targeted experiments and incorporated this knowledge into a process-based soil organic matter model. The observational studies compared the importance of leaf litter decomposability versus fungal identity on soil organic matter processes. We found that often fungal identity and traits were more important drivers of soil organic matter patterns than leaf litter decomposability. We ran two novel experiments: 1) a growth chamber experiment across four EcM and four AM tree species using a 13 C-labeled atmosphere to trace seedling-derived C into hyphae, the rhizosphere, and soil; and 2) an in situ decomposition experiment of six different 13 C and 15 N labeled litters that ranged in decomposability incubated across a gradient of EcM dominance at three sites that capture important variation in climate, soils, and forest species composition. In the first experiment, we found no significant differences of seedling mycorrhizal association on soil carbon sequestration over a growing season, but we did find that mycorrhizal association affected rhizodeposition with EcM-associating seedlings depositing more carbon in response to increased nitrogen availability. The decomposition experiment is still ongoing, but thus far, we have found slower litter decomposition in only one of three EcM-dominated forests which suggests that differences between AM- and EcM-dominated forests depend on the environmental context and identity of the EcM fungi. Lastly, we explicitly incorporated mycorrhizal processes into the Carbon, Organisms, Rhizosphere, and Protection in the Soil Environment (CORPSE) model creating Myco-CORPSE. By including the different nutrient acquisition strategies of AM and EcM fungi, we explored the conditions under which EcM fungi can slow decomposition rates and lead to greater soil organic carbon accumulation compared to AM fungi. We found that the effect of EcM fungi was highly context dependent and that EcM fungi decreased decomposition in colder forests with recalcitrant litter inputs and when they produced oxidases and necromass-degrading enzymes. Our research highlights the importance of fungal nutrient acquisition in driving soil organic matter patterns and the need to move beyond the AM-EcM dichotomy to consider the identity and traits of the specific fungi participating in the symbiosis. Overall, this research has resulted in six, peer-reviewed published papers in journals such as Global Change Biology, Ecology (2), Soil Biology and Biochemistry, and Ecosystems (2). There are at least two more papers in progress on this research including one that was recently submitted to Global Change Biology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Using probability distribution function as a scaling approach to incorporate soil heterogeneity into biogeochemical models for greenhouse gas predictions (Final Technical Report)

The project investigated biogeochemical processes at terrestrial-aquatic interfaces (TAIs), focusing on soil microsite heterogeneity and its impact on greenhouse gas (GHG) fluxes. Using laboratory experiments, modeling, and data integration, researchers explored redox-driven microbial processes under fluctuating hydrological conditions. Key advancements included modifying the DAMM-GHG model to incorporateelectron acceptor availability and enhancing the AquaMEND model for improved microbial metabolism representation. Results highlighted microsite redox variability as a key driver of GHG fluxes, informing Earth system models. The project fostered interdisciplinary collaborations, student training, and the development of novel modeling frameworks to improve Earth'senergy budget.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

High-Density, Low-Hysteresis Storage Using Hydrated Salts in Surface-Functionalized Hydrogels (Final Technical Report)

Nearly 70 years ago, Glauber’s salt was identified as a leading phase change material (PCM) in terms of its heat storage density (~2x paraffin), thermal conductivity (~1W/m·K), safety, availability and cost (~$\$$100/ton). However, the complex issues of supercooling and incongruent melting due to phase separation have prevented realization of the promise. The addition of thickeners and nucleating agents such as borax solve these issues but only over few cycles. This work aims to (a) resolve long-standing challenges with Glauber’s salt as a thermal storage material through a unique materials approach, (b) to characterize the new material’s properties that are relevant to performance and (c) to explore its incorporation into commercial water heaters. The materials concept involves encapsulating the salt in custom-designed, large-mesh hydrogels that enable breakthrough advances. Specifically, (1) the choice of mesh size and polymer chemistry control diffusion of salt/water and help to eliminate phase segregation. With the hydrogel itself occupying <10% volume, there is little loss in storage density compared to another encapsulation. (2) Specific nucleation centers that covalently tether to the hydrogel trigger heterogeneous nucleation, eliminating supercooling-associated hysteresis losses. The fact that they are spatially tethered, prevents the loss in performance over multiple freeze/thaw cycles (>100). We report extensive characterization of the hydrogel complex in terms of its storage density, freezing/melting temperature, cycling losses, rheological properties, aging and thermal conductivity. The novel material developed in this work is a significant advancement over the state-of-art. Finally, we investigate its potential as a thermal storage material for commercial/residential water heating and identify scenarios in which its deployment is advantageous.

25 ENERGY STORAGE↗
DOE OSTI2025

Energetic Electron Transport in Magnetized Plasma with Magnetic Islands (Final Technical Report)

The main scientific goal of this project was to investigate the interactions between energetic electrons and magnetic islands in magnetized plasmas from lab to space. The proposed plan of addressed the following specific objectives: (1) Determine if energetic electrons are trapped by magnetic islands. Specifically, test the hypothesis that energetic electrons are trapped near island O-points due to stable orbits and de-confined near island X-points due to X-point tangles. (2) Determine how electron transport changes with island width and location. Specifically, test the hypothesis that electrons are accelerated by contracting magnetic islands through a Fermi acceleration process. (3) Assess how electron transport is affected by island dynamics, including island rotation, bifurcation, and/or island overlap. Specifically, test the hypothesis that electrons are deconfined and possibly accelerated during island rotations, bifurcations, and overlap due to stochastization of the magnetic field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Beyond Classical Searches: Enabling New Discovery Potential at the LHC (Final Technical Report)

The major goals of this project are: • 1. Employ Machine Learning to solve combinatorial problems in searches for new physics phenomena, with a focus on multijet signatures. • 2. Enable high-precision tracking for CMS at the HL-LHC by carrying out the Outer Tracker project for the Phase-II detector upgrade. Compared to the original proposal, the scope is reduced due to reduced resources in final award. In particular, the program of long-lived particle searches was descoped at that time due to lack of resources.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Computationally Efficient Control Co-Design Optimization Framework with Mixed-Fidelity Fluid and Structure Analysis: OpenTurbineCoDe (OTCD) - ARPA-E ATLANTIS Phase I Project (Final Technical Report)

The goal of the Department of Energy (DOE) Advanced Research Projects Agency-Energy (ARPA-E) Aerodynamic Turbines Lighter and Afloat with Nautical Technologies and Integrated Servo-control (ATLANTIS) Program is to develop new technologies for floating offshore wind turbines, or wind farms, using the discipline of control co-design (CCD.) In this context, our goal is to develop a computationally efficient optimization framework for design of floating offshore wind turbines. Our specific aim is to utilize high-fidelity structural, aerodynamic, aero-structural tools, and to derive control-oriented reduced- or low-order models directly from the high-fidelity tools. We proposed a mixed-fidelity modeling approach which means that we are also using low- and mid-fidelity tools when necessary. This research is conducted by a multidisciplinary team consisting of Rutgers University, University of Michigan, Brigham Young University, and the National Renewable Energy Laboratory (NREL). The computational framework, called OpenTurbineCoDe, is designed to integrate, where possible, traditional structural, aerodynamic, aeroelastic models (e.g., OpenFAST) and advanced control algorithms with higher fidelity simulation tools including Reynolds-averaged Navier–Stokes (RANS) solvers, and three-dimensional structural finite element solvers. All the high-fidelity tools used in this research provide numerically exact gradients to facilitate both efficient optimization and local linearization for control implementation.

17 WIND ENERGY↗
DOE OSTI2025

Research in Neutrino Physics (Final Technical Report)

The goal of the experimental neutrino efforts at Louisiana State University is to measure the properties of neutrinos and to improve our understanding of neutrino interactions. In pursuit of this goal, the group will continue its Intensity Frontier work on the DUNE experiment at Fermilab and the T2K experiment at J-PARC, Japan. The current work is focused on understanding how neutrinos change flavor and on the possibility for asymmetry between neutrinos and anti-neutrinos. The effort on T2K includes physics measurements using the collected T2K data and preparation for the second phase T2K-II data with an increased beam power and the newly upgraded ND280 detector, featuring a novel 3D fine grained scintillation tracker with 4π acceptance and 3D readout. T2K is in a position to improve our understanding of neutrino nucleus interactions which continue to be one of the largest systematic uncertainties for neutrino oscillation measurements. On DUNE, the effort is on analyzing the data collected by the ProtoDUNE-SP prototype at CERN and on the design, installation, and commissioning of ProtoDUNE-II and later the DUNE Far Detector cold electronics. The final DUNE Module-1 components will be fully characterized by ProtoDUNE-II and the collected data will be used to improve and tune simulation and reconstruction algorithms, and to measure hadron scattering cross section, used to improve the modeling of neutrino final state interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Control of Energy Transport and Transduction in Photosynthetic Down-Conversion (Final Technical Report)

The research conducted under this contract focused on three areas related to control of energy transport and transduction in natural and synthetic light harvesting systems: (1) experimental and theoretical studies exploring the use of ultrafast laser pulse shaping to manipulate the initially excited states of multi-chromophore biological light harvesting networks and influence the early time energy transfer and electronic and vibrational relaxation pathways, (2) fundamental theoretical developments aimed at computing and analyzing the dynamics of excitations of complex heterogeneous environments and nano structures, and (3) joint experimental and theoretical design studies of artificial light harvesting materials exploring the influence of incorporating different types of organic layers in low dimensional lead halide perovskite materials on their hot carrier relaxation dynamics, and theoretical studies of the design of nano structured light harvesting antenna systems. These research projects supported the training of three theoretical and computational graduate students, one experimental graduate student, and one experimental post-doctoral researcher. The research has been published in seven peer reviewed papers and presented at several international meetings and workshops.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Implications of Aerosol Physicochemical Properties Including Ice Nucleation at ARM Mega Sites for Improved Understanding of Microphysical Atmospheric Cloud Processes (Final Technical Report)

Continuous, long-term measurements of atmospheric ice-nucleating particles (INPs) that influence clouds and precipitation were conducted to investigate the abundance and variability of ground-level INPs across the world. Three field campaigns were organized by the DOE Atmospheric Radiation Measurement (ARM) program, including Examining INP from Southern Great Plains (ExINP-SGP, 2019), Examining INP from Eastern North Atlantic (ExINP-ENA, 2020 – 2021), and Examining INP from North Slope of Alaska (ExINP-NSA, 2021 – 2024). Additional small-scale supporting field experiments were performed in 2019 and 2021 to collect airborne particulate matter at SGP for complementary laboratory characterization of the particles’ physical and chemical properties [Aerosol-Ice Formation Closure Pilot Study (AEROICESTUDY), 2019; ExINP-SGP II, 2021]. In these studies, the PI’s team measured INP concentration with both real-time and laboratory measurements in a wide range of freezing temperatures ($T$ from 0 °C to about –30 °C). This project elucidated spatial variability and seasonality in the abundance of immersion mode active INPs across three ARM sites using a single instrument, a Portable Ice Nucleation Experiment (PINE) chamber version 03 (PINE-03 hereafter). Collocated aerosol and meteorological data were analyzed to assess the correlation between ambient INP abundance, air mass origin region, and meteorological variability. Our findings suggest very high freezing efficiency of INPs at the NSA site across the measured temperatures (ice nucleation active surface site density, $n_s(T)$, $\approx 2 \times 10^{8} - 10^{10}$ m -2 for from –16 to –31 °C), which is a factor of 10 – 1000 times greater efficiency as compared to that found in the previous mid-latitude INP measurements in autumn using the same instrument; surprisingly high INP abundance ($\ge 1 \text{ L}^{-1}$ at –25 °C) for the examined temperatures throughout the year that PINE-03 did not measure at other sites; and high INP concentration in spring, possibly related to arctic haze episodes.

58 GEOSCIENCES↗
DOE OSTI2025

Particle Dark Matter Across Scales (Final Technical Report)

The research supported by this DOE grant investigated the nature of dark matter, particularly its particle properties and astrophysical manifestations, over the period of 2018 to 2024. The proposal focused on leveraging astrophysical probes, cosmological models, and high-resolution simulations to further our understanding of dark matter, its possible interactions, and the theoretical models that could explain its properties. This research directly contributes to the DOE's mission of exploring the fundamental constituents of the universe, advancing particle physics, and using cosmological and astrophysical observations to detect dark matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Support for the Core Research Activities and Studies of the Computer Science and Telecommunications Board (DE-SC0020446 Final Technical Report)

Supported the core operations of the National Academies' Computer Science and Telecommunications Board (CSTB). Helped support planning and conducting of board meetings, identification of priority topics in computer science and other areas of computing and communications technologies, and oversight for CSTB's portfolio of studies and convenings. Activities shaped and overseen included: a workshop on Al for scientific discovery; collaborative work with other Academies units on a study on foundational research gaps and future directions for digital twins; a study on current capabilities, future prospects, and governance of facial recognition technologies, a study on post- exascale computing; a study on fostering responsible computing research, collaborative work with other Academies units on automated research workflows for accelerated scientific discovery; a study on meeting federal cybersecurity workforce needs, and a study of the ecosystem driving information technology innovation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Tokamak Disruption Simulation (Final Technical Report)

The Tokamak Disruption Simulation collaboration was a SciDAC (Scientific Discovery through Advanced Computing) program led by Xianzhu Tang of the Los Alamos National Laboratory but with separate grants to each institution. I was the PI for Columbia University and the only person at Columbia directly funded by this SciDAC. Disruptions are a sudden loss of confinement in tokamaks, and a reliable method of preventing disruptions must be developed before tokamak fusion power plants become feasible. A related plasma confinement concept, the stellarator, is the only way known way of preventing disruptions with the required reliability. The largest devices, both existing and under construction, for confining plasmas for fusion using magnetic fields are tokamaks, so it is important to solve their disruption issues. The sudden loss of confinement in tokamaks can be from a bit of material falling into the plasma, which causes the plasma energy to be quickly lost by radiation, or by an instability causing a breakup of the confining surfaces formed by the magnetic field. This breakup can occur more than a million times faster than one would naively think possible. The sudden breakup of surfaces is called a fast magnetic reconnection and also results in a sudden cooling of the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Regulating Gas Transport in Molecularly Engineered Polymer Membranes (Final Technical Report)

Energy-efficient separation processes are essential for a wide range of applications ranging from clean fuels (e.g., hydrogen purification) and petroleum refining (e.g., natural gas processing) to water purification and carbon capture. Membrane-mediated separations have shown tremendous promise in providing high productivity and high separation efficiency at significantly lower energy consumption, e.g., up to 90% less energy cost than traditional thermally driven processes such as distillation. Polymeric membranes–the dominant separation membrane materials–have yet to reach their full potential due to their limitations in long-term durability (e.g., productivity loss over the period of their lifetime due to physical aging) or insufficient stability under harsh conditions (e.g., high temperature, chemically complex feeds). This research seeks to establish a new paradigm in polymer membrane material design by harnessing crosslinked model networks with well-defined yet finely tailorable microstructure to facilitate fast and selective gas transport and simultaneously enhance membrane stability. Unlike traditional randomly crosslinked polymers, which suffer from structural inconsistencies and consequently suboptimal gas separation performance, crosslinked model network membranes prepared via a precisely controlled end-linking process enables the creation of previously unattainable microstructure tunability, which, in turn, results in versatile crosslinked membranes with high separation performance that meet the needs of various challenging gas separations. Using model network framework as a fundamental tool by applying this concept in diverse polymer categories, this work has led to the development of various innovative crosslinked membrane structures such as unimodal, bimodal and clustered model networks. These advanced crosslinked polymer membranes not only demonstrate exceptional gas separation performance that significantly outperform existing randomly crosslinked membranes, but also possess excellent long-term durability and robust stability under complex operating conditions. From a fundamental perspective, results from this research provide critical mechanistic insights into gas separation in crosslinked polymer membranes, addressing key knowledge gaps and opening new avenues for membrane design to meet various separation needs. The new membrane materials produced from this research enable the use of polymeric membranes for high temperature gas separations, offering substantial energy and cost savings by eliminating the need for repeated cooling-heating cycles in industrial processes.

02 PETROLEUM↗
DOE OSTI2025

SiC Receiver/Reactor by Additive Manufacturing for Concentrated Solar Thermocatalysis with Thermal Energy Storage (Final Technical Report - Public)

The direct use of solar thermal energy provides opportunities for low-cost heating sources for a variety of applications. Ultra-high temperatures around 1000°C are high value and highly useful for energy-demanding industries. Many materials cannot withstand these conditions. In the area of Sustainable Chemicals, further limitations on material stability exist. Combining state-of-the-art materials with new designs provides a promising pathway for harvesting solar thermal energy and performing high temperature chemical processes. However, conventional manufacturing limits the potential for design flexibility. In this project, Additive Manufacturing was combined with advanced materials and new chemical reactor designs. In addition, 24/7 energy is necessary for chemical processing, and designs for ultra-high temperature thermal storage were devised. Specifically, preliminary design of a novel solar thermal receiver was developed in this project and designed to work with thermocatalytic reactors for producing sustainable chemicals and fuels. An ultra-high temperature particle storage system and heat exchangers were proposed to transport ultra-hot air as thermal fluid for the system. On a broader scale, this system could be used to tap solar thermal energy for a centralized facility with capability of transferring that heat to various segments at a full range of temperatures to 1000°C. The project pushed the temperature boundaries past those in current use, and Additive Manufacturing was envisaged for fabricating the receiver to meet requirements of extreme environments. An extensive analysis of silicon carbide additive manufacturing was performed to compare the thermal and mechanical properties of complex geometries compared to conventional material and those manufactured via other methods. The Additive Manufacturing via Binder-Jet printing was optimized and characterized to provide high quality and reproducible components capable of withstanding the proposed extreme environments. The designs for the concentrating solar thermal cavity with ultra-hot air thermal fluid showed high performance in simulations, attributable to the complex optimized geometries of the 3D printed systems. The bright future of Additive Manufacturing with advanced materials developments should provide more options and even higher quality as the technology further develops. Current costs for Additive Manufacturing of advanced ceramics is relatively low, however post-processing of the materials for extreme environments is currently high. There is little industrial-scale infrastructure for these, but it is growing as niche applications become more mainstream. The results of the project can be translated into similar extreme environments for concentrating solar thermal energy as well as its integration with ultra-hot air thermal fluids. A number of industries that require ultra-high temperatures need to electrify or otherwise decarbonize for climate goals, and this project showed that theoretically there is a pathway to do so with direct concentrated solar thermal power.

10 SYNTHETIC FUELS↗
DOE OSTI2025

Direct Air Capture and Electromicrobial Production (DAC-EMP) (Final Technical Report for ARPA-E Project)

The collaborative effort of UC Berkeley and GE Vernova (formerly GE Research) aimed to develop an integrated, three-step process to directly capture and convert carbon dioxide (CO 2 ) from ambient air into butanol, a platform molecule for diesel and jet fuels. This new process is intended to address the unmet need for carbon-neutral drop-in substitutes for fossil gasoline, which would substantially reduce the carbon footprint of the transportation sector without requiring significant changes to the nation’s transportation infrastructure. The U.S. alone consumes ~120 billion gallons of gasoline per year, and the use of fossil fuels in transportation accounts for ~30% of U.S. greenhouse gas emissions, a major contribution to the ongoing climate crisis. A successful replacement fuel must therefore be produced in a process that has low carbon emissions over its life cycle while demonstrating both scalability and economic competitiveness. The proposed system is tailorable to a wide range of applications and can establish a viable approach for direct capture and conversion of CO 2 to value-added products with much lower land use compared to a biotechnological process relying on corn-derived glucose.

09 BIOMASS FUELS↗