Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “small wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Expected scientific yield of Seasat-A and its application to Corps of Engineers programs

The Corps of Engineers interest in SEASAT-A is a natural outgrowth of its mission to protect and manage the Nation's shorelines. In regard to the expected payload on SEASAT-A the following general study areas can be identified: gravity waves, wind waves, wind-wave interaction, storms and hurricanes, ice, coastal currents, tsunamis, and to a very small extent geoid modelling as it applies to determination of sea level and tides.

Teleki, P. G.↗
NASA NTRS1976

The global reference atmospheric model, mod 2 (with two scale perturbation model)

The Global Reference Atmospheric Model was improved to produce more realistic simulations of vertical profiles of atmospheric parameters. A revised two scale random perturbation model using perturbation magnitudes which are adjusted to conform to constraints imposed by the perfect gas law and the hydrostatic condition is described. The two scale perturbation model produces appropriately correlated (horizontally and vertically) small scale and large scale perturbations. These stochastically simulated perturbations are representative of the magnitudes and wavelengths of perturbations produced by tides and planetary scale waves (large scale) and turbulence and gravity waves (small scale). Other new features of the model are: (1) a second order geostrophic wind relation for use at low latitudes which does not "blow up" at low latitudes as the ordinary geostrophic relation does; and (2) revised quasi-biennial amplitudes and phases and revised stationary perturbations, based on data through 1972.

Justus, C. G.↗
NASA NTRS1979

Miniature thermocouple disconnect

Commercially available subminiature connector modified for utilization with both flexible and small diameter metal-sheathed thermocouples results in reliable thermocouple for instrumentation on wind-tunnel models smaller than commercial disconnects normally used.

Quinn, K. L.↗
NASA NTRS1985

Anatomy of a cosmic-ray neutrino source and the Cygnus X-3 system

The effects of an intense beam of ultra-high energy cosmic rays from a compact object in the Cygnus X-3 binary system hitting the companion star, and of the subsequent production of secondary neutrinos, are examined. A maximum allowable beam luminosity of about 10 to the 42nd erg/s is found for a system containing a 1-10 solar mass main sequence target star. The proton beam must heat a relatively small area of the target star to satisfy observational constraints on the resulting stellar wind. With such a model, the neutrino to gamma-ray flux ratio of about 1000 can result from a combination of gamma-ray absorption and a large neutrino to gamma-ray duty cycle ratio. It is found that the high density of the atmosphere resulting from compression by the beam leads to pion cascading and a neutrino spectrum peaking at 1-10 GeV energies.

Stecker, F. W.↗
NASA NTRS1983

Electron microscopic observations of hydrogen implantation in ilmenites

Hydrogen ion beams were found to form submicrometer, bumpy textures on the surface of ilmenite grains. From this effect, it is believed that similar bumpy textures seen on lunar ilmenite, pyroxene, and olivine grains are likely to be caused by solar wind irradiation. As a consequence, the concentration of bumpy textured grains may be a useful index of surface maturity for lunar soils. An attempt was made to search for grains with these bumpy textures in interplanetary dust and lunar and meteoritic regolith breccias in order to obtain information about the duration of their exposure to the solar wind. Solar wind irradiation was simulated on natural, terrestrial ilmenite. Hydrogen ion beams were directed at small grains and polished sections which were then examined by electron microscopy.

Blanford, G. E.↗
NASA NTRS1987

Characteristics of cometary picked-up ions in a global model of Giacobini-Zinner

Energetic ions observed during the International Cometary Explorer (ICE) spacecraft flyby of comet Giacobini-Zinner provide information about both the constitution of comets and the plasma physical processes associated with their interaction with the solar wind. In this investigation the details of ion 'pickup,' in the limit where small-scale fluctuations in the plasma and magnetic field are neglected, are modeled by following the motion of a large number of initially cold, heavy (mass 18) ions in a global magnetohydrodynamic model of the local plasma and magnetic field. The results indicate how the background or macroscopic velocity and magnetic field structure of the comet can affect the average spatial and spectral characteristics of the observed cometary ions. These effects, which occur by virtue of forces associated with the compression and the curvature of the magnetic field in the presence of the stagnating plasma flow, can explain the double maxima in the time series of the energetic ion flux observed along the ICE trajectory.

Kimmel, C. D.↗
NASA NTRS1988

Bracknell Meteorological Office

The Bracknell (U.K.) Meteorological Office runs a global weather model twice a day, providing the following data: surface and radiosonde; aircraft reports; and satellite soundings and wind. A human forecast is made every six hours. The model runs on a 150 km grid with 15 levels, and takes about four minutes on a Cyber-205. The standard output from the global products are wind, temperature, height, tropopause, and maximum wind. Various experiments have been conducted to see if short-range forecasters could improve on the upper-wind forecasts over the numerical model; the numerical model remains of paramount importance. Small-scale models are being run in the U.S. and the U.K. A fine-mesh model covers Europe and the Atlantic. A mesoscale model is under development. A great deal of verification work is done to see how good the models are.

Flood, Colin R.↗
NASA NTRS1991

Using SN 1987A light echoes to determine mass loss from the progenitor

The hypothesis that the blue progenitor of SN 1987A passed through a blue supergiant phase ending with the expulsion of the outer envelope is tested. The many light echoes seen near SN 1987A were used to search for a mass flow from the progenitor and for abrupt density changes at the limits of this smooth mass flow. The progenitor needed roughly a million yr to create these structures, assuming a constant mass loss at 15 km/s. The dust in the region is small-grained and isotropically scattering. Interaction between the progenitor blue supergiant and red supergiant winds is probably contained within a roughly spherical structure 1.5 pc in diameter.

Crotts, Arlin P. S.↗
NASA NTRS1992

Plasmaspheric wind

Observational evidence is presented indicating that beyond L = 1.7-2 plasma corotating in the plasmasphere expands continuously with a small outward directed bulk velocity perpendicular to geomagnetic field lines. A numerical simulation of plasmaspheric flux tube drift motion is presented in support of such an outward plasma expansion. The maximum expansion velocity inside the plasmasphere is determined by the maximum value of the plasma interchange velocity, which is inversely proportional to the value of the integrated Pedersen conductivity.

Lemaire, J.↗
NASA NTRS1984

4 X 7 M Modeling Program. The Use of Small-Scale Modeling in Defining Flow Improvements for the Langley 4 X 7-Meter Tunnel

The use of small scale modeling in defining flow improvements for the Langley 4 x 7 meter wind tunnel is presented. Topics covered in viewgraph format include: description of the 4 x 7 meter wind tunnel, description of the 1/24 scale model, wind tunnel circuit flow characteristics, open test section turbulence characteristics, and conclusions.

Applin, Zachery T.↗
NASA NTRS1993

Aerodynamic analysis of Pegasus - Computations vs reality

Pegasus, a three-stage, air-launched, winged space booster was developed to provide fast and efficient commercial launch services for small satellites. The aerodynamic design and analysis of Pegasus was conducted without benefit of wind tunnel tests using only computational aerodynamic and fluid dynamic methods. Flight test data from the first two operational flights of Pegasus are now available, and they provide an opportunity to validate the accuracy of the predicted pre-flight aerodynamic characteristics. Comparisons of measured and predicted flight characteristics are presented and discussed. Results show that the computational methods provide reasonable aerodynamic design information with acceptable margins. Post-flight analyses illustrate certain areas in which improvements are desired.

Mendenhall, Michael R.↗
NASA NTRS1993

Spectral measurements of shock layer radiation in an arc-jet wind tunnel

Measurements were made of the radiating gas cap of a blunt body in an NASA Ames 20 MW arcjet wind tunnel. The test gas was air. Spectra of the flux incident on a small aperture centered at the stagnation region were obtained. A helium-cooled MgF window transmitted flux into an evacuated collimating system that focused the aperture onto the entrance slit of a spectrometer. Data were obtained with films and by photomultipliers. The range covered was 120 nm to 1000 nm and the resolution was 0.05 nm to 0.5 nm. This paper presents preliminary results from the experiment. Representative spectral records from 200 nm to 1000 nm are shown. The spectra show the atomic lines from oxygen and nitrogen in the IR, as well as the molecular systems of NO, N2, N2(+), and CN. Copper, as a contaminant, and carbon are tentatively identified.

Palumbo, Giuseppe↗
NASA NTRS1995

A diagnostic analysis of the VVP single-doppler retrieval technique

A diagnostic analysis of the VVP (volume velocity processing) retrieval method is presented, with emphasis on understanding the technique as a linear, multivariate regression. Similarities and differences to the velocity-azimuth display and extended velocity-azimuth display retrieval techniques are discussed, using this framework. Conventional regression diagnostics are then employed to quantitatively determine situations in which the VVP technique is likely to fail. An algorithm for preparation and analysis of a robust VVP retrieval is developed and applied to synthetic and actual datasets with high temporal and spatial resolution. A fundamental (but quantifiable) limitation to some forms of VVP analysis is inadequate sampling dispersion in the n space of the multivariate regression, manifest as a collinearity between the basis functions of some fitted parameters. Such collinearity may be present either in the definition of these basis functions or in their realization in a given sampling configuration. This nonorthogonality may cause numerical instability, variance inflation (decrease in robustness), and increased sensitivity to bias from neglected wind components. It is shown that these effects prevent the application of VVP to small azimuthal sectors of data. The behavior of the VVP regression is further diagnosed over a wide range of sampling constraints, and reasonable sector limits are established.

Boccippio, Dennis J.↗
NASA NTRS1995

Dependence of velocity fluctuations on solar wind speeds: A simple analysis with IPS method

A number of theoretical works have suggested that MHD plasma fluctuations in solar winds should play an important role particularly in the acceleration of high speed winds inside or near 0.1 AU from the sun. Since velocity fluctuations in solar winds are expected to be caused by the MHD plasma fluctuations, measurements of the velocity fluctuations give clues to reveal the acceleration process of solar winds. We made interplanetary scintillation (IPS) observations at the region out of 0.1 AU to investigate dependence of velocity fluctuations on flow speeds. For evaluating the velocity fluctuation of a flow, we selected the IPS data-set acquired at 2 separate antennas which located in the projected flow direction onto the baseline plane, and tried to compare skewness of the observed cross correlation function(CCF) with skewness of modeled CCFs in which velocity fluctuations were parametrized. The integration effect of IPS along a ray path was also taken into account in the estimation of modeled CCFs. Although this analysis method is significant to derive only parallel fluctuation components to the flow directions, preliminary analyses show following results: (1) High speed winds (Vsw greater than or equal to 500 km/s out of 0.3 AU) indicate enhancement of velocity fluctuations near 0.1 AU; and (2) Low speed winds (Vsw less than or equal to 400 Km/s out of 0.3 AU) indicate small velocity fluctuations at any distances.

Misawa, H.↗
NASA NTRS1986

Aerodynamic Loads Induced by a Rotor on a Body of Revolution

A wind-tunnel investigation was conducted in which aerodynamic loads were measured on a small-scale helicopter rotor and a body of revolution located close to it as an idealized model of a fuselage. The objective was to study the aerodynamic interactions as a function of forward speed, rotor thrust, and rotor/body position. Results show that body loads, normalized by rotor thrust, are functions of the ratio between free-stream velocity and the hover-induced velocity predicted by momentum theory.

Smith, Charles A.↗
NASA NTRS2003

Efficient Plasma Production in Low Background Neutral Pressures with the M2P2 Prototype

Mini-Magnetospheric Plasma Propulsion (M2P2) seeks the creation of a large-scale (10 km radius) magnetic wall or bubble (i.e. a magnetosphere) by the electromagnetic inflation of a small-scale (20 cm radius) dipole magnet. The inflated magnetosphere will intercept the solar wind and thereby provide high-speed propulsion with modest power and fuel requirements due to the gain provided by the ambient medium. Magnetic field inflation is produced by the injection of plasma onto the dipole magnetic field eliminating the need for large mechanical structures and added material weight at launch. For successful inflation of the magnetic bubble a beta near unity must be achieved along the imposed dipole field. This is dependent on the plasma parameters that can be achieved with a plasma source that provide continuous operation at the desired power levels of 1 to 2 kilowatts. Over the last two years we have been developing a laboratory prototype to demonstrate the inflation of the magnetic field under space-like conditions. In this paper we will present some of the latest results from the prototype development at the University of Washington and show that the prototype can produce high ionization efficiencies while operating in near space like neutral background pressures producing electron temperatures of a few tens of electron volts. This allows for operation with propellant expenditures lower than originally estimated.

Ziemba, T.↗
NASA NTRS2007

TBCC Inlet Experiments and Analysis

A research plan is being implemented at NASA to investigate inlet mode transition for turbine-based combined-cycle (TBCC) propulsion for the hypersonic community. Unresolved issues have remained on how to design an inlet system to supply both a turbine engine and a ram/scramjet flowpath that operate with both high performance and stability. The current plan is aimed at characterizing the design, performance and operability of TBCC inlets through a series of experiments and analyses. A TBCC inlet has been designed that is capable of high performance (near MIL-E-5008B recovery) with smooth transitioning characteristics. Traditional design techniques were used in an innovative approach to balance the aerodynamic and mechanical constraints to create a new TBCC inlet concept. The inlet was designed for top-end Mach 7 scramjet speeds with an over/under turbine that becomes cocooned beyond its Mach 4 peak design point. Conceptually, this propulsion system was picked to meet the needs of the first stage of a two-stage to orbit vehicle. A series of increasing fidelity CFD-based tools are being used throughout this effort. A small-scale inlet experiment is on-going in the GRC 1'x1' Supersonic Wind Tunnel (SWT). Initial results from both the CFD analyses and test are discussed showing that high performance and smooth mode transitions are possible. The effort validates the design and is contributing to a large-scale inlet/propulsion test being planned for the GRC 10' x10' SWT. This large-scale effort provide the basis for a Combined Cycle Engine Testbed, (CCET), that will be able to address integrated propulsion system and controls objectives.

Saunders, Dave↗
NASA NTRS2008

Stereoscopic Imaging in Hypersonics Boundary Layers using Planar Laser-Induced Fluorescence

Stereoscopic time-resolved visualization of three-dimensional structures in a hypersonic flow has been performed for the first time. Nitric Oxide (NO) was seeded into hypersonic boundary layer flows that were designed to transition from laminar to turbulent. A thick laser sheet illuminated and excited the NO, causing spatially-varying fluorescence. Two cameras in a stereoscopic configuration were used to image the fluorescence. The images were processed in a computer visualization environment to provide stereoscopic image pairs. Two methods were used to display these image pairs: a cross-eyed viewing method which can be viewed by naked eyes, and red/blue anaglyphs, which require viewing through red/blue glasses. The images visualized three-dimensional information that would be lost if conventional planar laser-induced fluorescence imaging had been used. Two model configurations were studied in NASA Langley Research Center's 31-Inch Mach 10 Air Wind tunnel. One model was a 10 degree half-angle wedge containing a small protuberance to force the flow to transition. The other model was a 1/3-scale, truncated Hyper-X forebody model with blowing through a series of holes to force the boundary layer flow to transition to turbulence. In the former case, low flowrates of pure NO seeded and marked the boundary layer fluid. In the latter, a trace concentration of NO was seeded into the injected N2 gas. The three-dimensional visualizations have an effective time resolution of about 500 ns, which is fast enough to freeze this hypersonic flow. The 512x512 resolution of the resulting images is much higher than high-speed laser-sheet scanning systems with similar time response, which typically measure 10-20 planes.

Danehy, Paul M.↗