Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulated waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Mitigation of deceleration-phase Rayleigh–Taylor instability growth in inertial confinement fusion implosions

Rayleigh–Taylor growth during shell deceleration is one of the main limiting factors for target performance in inertial confinement fusion implosions. Here, using analytical scaling laws and hydrodynamic simulations, we show that such amplification can be mitigated by reducing the initial mass density in the central target region. The perturbation growth reduction is caused by a smaller hot-spot convergence ratio during deceleration, increased density scale length, and enhanced ablation stabilization. The required central density reduction can be achieved using the dynamic shell formation concept.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Simulations of non-integer upconversion in resonant six-wave scattering

Resonant upconversion through a sixth order relativistic nonlinearity resulting in a unique resonance was recently proposed [Malkin and Fisch, Phys. Rev. E 108, 045208 (2023)]. The high order resonance is a unique non-integer multiple of a driving pump frequency resulting in a frequency upshift by a factor of ≈3.73. We demonstrate the presence, unique requirements, and growth of this mode numerically. Through tuning waves to high amplitude, in a mildly underdense plasma, the six-photon process may grow more than other non-resonant but lower order processes. The growth of the high frequency mode remains below the nonlinear growth regime. However, extending current numerical results to more strongly coupled resonances with longer pulse propagation distances suggests a pathway to significant upconversion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Fiber-optic bolometers with high-temperature tolerance and reduced time constants for fusion plasma diagnostics

Fiber-optic bolometers (FOBs) designed for plasma radiation measurement in magnetically confined fusion environments have been previously developed and tested at the DIII-D tokamak. These FOBs utilize a silicon Fabry–Perot interferometer at the fiber tip for temperature measurement and a gold disk as a radiation absorber. This paper presents recent advancements in the development of FOBs with reduced cooling time constants and enhanced temperature tolerance. We also demonstrate high-temperature operation and report findings from irradiation tests. By incorporating a copper sensor holder as a thermal sink and integrating two closely packed sensor heads into a compact design, the cooling time constants were reduced to ∼100 ms in vacuum, while minimizing uncertainties caused by temperature gradients. The FOBs were subjected to heating at 400 °C for five hours, with no observed degradation in noise performance post-heating. High-temperature operation tests were conducted at ∼220 °C using a 404 nm square-wave modulated laser to simulate the plasma radiation. In addition, four FOBs constructed from copper-coated pure-silica fibers were fabricated and underwent irradiation testing, enduring a total γ-radiation dose of 15.2 MGy and a neutron fluence of 1.6 × 10 18 n/cm 2 . As a result, the FOBs maintained their physical integrity and the optical signal shows high visibility throughout the test.

42 ENGINEERING↗
DOE OSTI2023

Applications of “Synchrotron Radiation Workshop” Code

The “Synchrotron Radiation Workshop” (SRW) computer code was started in the group of Insertion Devices of the European Synchrotron Radiation Facility in 1997. The idea behind it was to combine in one software library electrodynamics methods for calculating electric fields (and derived characteristics) of synchrotron radiation (SR) generated by relativistic electrons moving in magnetic fields of nearly arbitrary configuration with wave-optics methods for simulating propagation of radiation through optical elements of beamlines. Further, the use of this general approach was initially driven by applications in electron beam diagnostics using SR. However, with time it started to be used for more complicated beamlines of synchrotron light sources, and the use of the code for these applications continues to increase, with the new light sources offering brighter and more coherent x ray beams for wide ranges of experiments in different areas of science.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Fast flavor instability in hypermassive neutron star disk outflows

Here, we examine the effect of neutrino flavor transformation by the fast flavor instability (FFI) on long-term mass ejection from accretion disks formed after neutron star mergers. Neutrino emission and absorption in the disk set the composition of the disk ejecta, which subsequently undergoes r-process nucleosynthesis upon expansion and cooling. Here we perform 28 time-dependent, axisymmetric, viscous-hydrodynamic simulations of accretion disks around hypermassive neutron stars (HMNSs) of variable lifetime, using a 3-species neutrino leakage scheme for emission and an annular-lightbulb scheme for absorption. We include neutrino flavor transformation due the FFI in a parametric way, by modifying the absorbed neutrino fluxes and temperatures, allowing for flavor mixing at various levels of flavor equilibration, and also in a way that aims to respect the lepton-number preserving symmetry of the neutrino self-interaction Hamiltonian. We find that for a promptly-formed black hole (BH), the FFI lowers the average electron fraction of the disk outflow due to a decrease in neutrino absorption, driven primarily by a drop in electron neutrino/antineutrino flux upon flavor mixing. For a long-lived HMNS, the disk emits more heavy lepton neutrinos and reabsorbs more electron neutrinos than for a BH, with a smaller drop in flux compensated by a higher neutrino temperature upon flavor mixing. The resulting outflow has a broader electron fraction distribution, a more proton-rich peak, and undergoes stronger radiative driving. Disks with intermediate HMNS lifetimes show results that fall in between these two limits. In most cases, the impact of the FFI on the outflow is moderate, with changes in mass ejection, average velocity, and average electron fraction of order ~10%, and changes in the lanthanide/actinide mass fraction of up to a factor ~2.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Field-Driven Dynamics of Magnetic Hopfions

Herein, we present micromagnetic simulations on resonant spin wave modes of magnetic Hopfions up to 15 GHz driven by external magnetic fields. A sharp transition is found around 32 mT coinciding with a transition from Hopfions to magnetic torons. Furthermore, the modes exhibit characteristic amplitudes in frequency space accompanied by unique localization patterns in real space, and are found to be robust to damping around topological features, particularly vortex lines in Hopfions and Bloch points in torons. The marked differences in spin wave spectra between Hopfions, torons and target skyrmions can serve as fingerprints in future experimental validation studies of these novel 3d topological spin textures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Second harmonic Bessel-Gauss beam shaping with elliptic axicon aberrations

The second harmonic (SH) of an axicon generated Bessel-Gauss beam is created through the nonlinear interaction of photons with a crystal, resulting in the energy doubling of the output photons. In this work, we show experimentally that in addition to frequency doubling, the SH of Bessel-Gauss beams under asymmetric aberrations from an elliptic axicon exhibit intriguing beam formation. Particularly, the central region of the SH beam profile is composed of two central spots of various geometries surrounded by nested ellipses; one of which is the configuration of two central gamma dots with similar radius knotted by nested ellipses for a zeroth-order Bessel-Gauss pump. These SH beams consistently maintain their spatial profile throughout propagation, reminiscing the behavior of screw dislocations in wave patterns. Our numerical simulations produce beam dynamics consistent with that of experiments and further implicate the remarkable interweaving of bright spots with dark vortices. This is especially noticeable when the beams dynamically oscillate along the optical axis, resulting in the genesis of spatially polarized beams with a knotted framework. The insights gained from our study establish a novel paradigm for exploring interactions of Bessel-like beams with vortex dynamics. This, in turn, has the potential to spark innovations in optical applications, fostering new methodologies to harness and manipulate complex light structures. Our experimental findings could spur new methods of generating logical states of light and new opportunities for material processing control. Published by the American Physical Society 2025

Wang, Tianhong (ORCID:0000000169104201)↗
DOE OSTI2025

A Comparison of Battery Charge Controller Technologies for Wave Energy Converters

Wave energy is a uniquely challenging field for electrical system designers. High peak and low average power potential with a constantly varying energy input is difficult to harness and control through conventional means. To power the blue economy, low-powered wave energy converters (WECs) need batteries for energy storage. Safely and effectively charging batteries from waves requires a charge controller to properly monitor and control voltage and current going to the battery. Currently, off-the-shelf charge controllers exist for other renewable generation such as wind, hydro, and solar. Two topologies were validated: a buck converter and a pulse width modulation (PWM) charge controller. Using an in-lab dry testbed, wave energy power inputs were simulated to properly validate the effectiveness of existing charge controller technologies, identifying the shortcomings and improvements needed to effectively harness wave energy.

battery storage↗
DOE OSTI2020

A Comparison of Interface Growth Models Applied to Rayleigh–Taylor and Richtmyer–Meshkov Instabilities

Sophisticated numerical models that contain fluid interfaces rely upon interface evolution models to approximate the transition to turbulence near interfaces, in the presence of Rayleigh–Taylor (RTI) or Richtmyer–Meshkov (RMI) instability. Semi-analytical models have been developed in recent decades to predict the interface growth from an initial state into the nonlinear regime. Two of these models are considered in this study. They are the Goncharov and the z-models. Both of these interface models have strengths and weaknesses, which are examined here. Both of them have been implemented in the xRAGE compressible flow solver, which models fluid interfaces. The flow solver provides the fluids acceleration as a body force to the interface model. The purpose of such interface model is to evolve the early times of interface position as a subgrid model within a compressible flow simulation in order to then initialize a turbulence model. In this work, the interface models are assessed and compared for their evolution of RTI and RMI. The z-model performed better than the Goncharov model for all cases that were explored.

42 ENGINEERING↗
DOE OSTI2022

Time reversal in a phononic crystal using finite-element modeling and an equivalent circuit model

A phononic crystal acts as a dispersive medium with a phase speed that is lower than the bulk wave speed at frequencies below the resonance of a single resonator. Time reversal is used to compensate for the phase shifts caused by individual resonators as the waves enter the medium and enable focusing of acoustic waves among the crystal. An equivalent circuit, which can predict the dispersion and attenuation of the crystal model, is shown and compared to a full-wave finite-element simulation in frequency and time. The phase shift due to a single resonator is also depicted.

Kingsley, Adam D. (ORCID:0000000226611788)↗
DOE OSTI2021

A Shallow-Water Model for Convective Self-Aggregation

Randomly distributed convective storms can self-aggregate in the absence of large-scale forcings. Here we present a 1D shallow-water model to study the convective self-aggregation. This model simulates the dynamics of the planetary boundary layer and represents convection as a triggered process. Once triggered, convection lasts for finite time and occupies finite length. Here we show that the model can successfully simulate self-aggregation, and that the results are robust to a wide range of parameter values. In the simulations, convection excites gravity waves. The gravity waves then form a standing wave pattern, separating the domain into convectively active and inactive regions. We analyze the available potential energy (APE) budget and show that convection generates APE, providing energy for self-aggregation. By performing dimensional analysis, we develop a scaling theory for the size of convective aggregation, which is set by the gravity wave speed, damping time scale, and number density of convective storms. This paper provides a simple modeling framework to further study convective self-aggregation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Compensating attenuation effects in full-waveform inversion with dissipation-dispersion decoupling

Seismic attenuation poses challenges to velocity model building from acoustic/elastic full-waveform inversion (FWI). In particular, when constructing the FWI gradient for velocity inversion, recent studies have indicated that the high-attenuation structure could distort the gradient by damping the amplitudes and shifting the kinematic phases, resulting in an imbalanced update and thus unreliable velocity model. These Q effects are particularly significant in the reflection acquisition geometry due to the “double-damping” issue. Here, we develop a Q-compensated FWI algorithm for constructing a Q-free FWI gradient. By using a recently developed viscoacoustic wave propagator, this compensation can be done conveniently by keeping the dispersion term and flipping the dissipation term in the wave equation when we simulate the forward and time-reversed adjoint wavefields. The resultant gradient obtained by interacting these two wavefields has correct kinematics and Q-free amplitudes. This Q-compensated FWI can balance the update between Q- and no- Q-areas, which we determine using synthetic examples. In addition, we illustrate how to take advantage of the dissipation-dispersion decoupling to determine the anomalous Q value in the Q model building workflow via Q-compensated reverse time migration.

Geochemistry & Geophysics↗
NASA NTRS1980

Structural tests on a tile/strain isolation pad thermal protection system

The aluminum skin of the space shuttle is covered by a thermal protection system (TPS) consisting of a low density ceramic tile bonded to a matted-felt material called strain insulation pad (SIP). The structural characteristics of the TPS were studied experimentally under selected extreme load conditions. Three basic types of loads were imposed: tension, eccentrically applied tension, and combined in-plane force and transverse pressure. For some tests, transverse pressure was applied rapidly to simulate a transient shock wave passing over the tile. The failure mode for all specimens involved separation of the tile from the SIP at the silicone rubber bond interface. An eccentrically applied tension load caused the tile to separate from the SIP at loads lower than experienced at failure for pure tension loading. Moderate in-plane as well as shock loading did not cause a measurable reduction in the TPS ultimate failure strength. A strong coupling, however, was exhibited between in-plane and transverse loads and displacements.

Williams, J. G.↗
NASA NTRS1981

Shuttle Orbiter tethered subsatellite for exploring and tapping space plasmas

Consideration is given to the possibilities for studies in space plasma physics offered by a subsatellite mechanically tethered above the Space Shuttle Orbiter by a long conducting wire. The proposed experiment, designated the Shuttle Electrodynamic Tether Systems (SETS) is based on the concept of collecting electrons at the subsatellite and ejecting them from the Orbiter, made possible by the emf generated by the motion of the tether across geomagnetic field lines. The power generated in this manner can be used both for practical purposes within the Orbiter and for the creation of large-amplitude plasma and electromagnetic waves within the surrounding plasma. For a conducting spherical subsatellite 30 m in diameter with a 10-km tether drawing 1 A, calculations show that emfs on the order of 1000-2000 V and energy dissipation of as much as 10,000 W can be obtained, accompanied by the generation of two regions of net electric charge in the ionosphere. Scientific studies considered for SETS include the measurement of MHD waves artificially generated in the ionosphere, the investigation of current-driven plasma instabilities, VLF wave generation and the simulation of electrodynamics associated with the motion of celestial bodies through plasma.

Banks, P. M.↗
NASA NTRS1983

International Geoscience and Remote Sensing Symposium, Universitaet Muenchen, Munich, West Germany, June 1-4, 1982, Proceedings

The present conference on geoscience and remote sensing considers the multispectral remote sensing of saline seeps, the augmentation of LANDSAT MSS data with topographic data, thematic mapping, the sampling problem in radiation budget studies, aerial conductivity measurements over geothermal areas, a comparison of multifrequency band radars for crop classification, the improved estimation of vegetation-covered soil by combined active/passive microwave remote sensing, and atmospheric water vapor profiling by ground-based radiometry. Also discussed are SAR imaging from an inclined geosynchronous orbit, the classification of agricultural crops in radar images, the Ocean Color Experiment on the second orbital flight test of the Space Shuttle, the dielectric properties of wet materials, remote sensing systems for the mm-wave region, and the simulation of spaceborne stereo radar imagery.

Seiber, A. J.↗
NASA NTRS1988

Numerical study of unsteady viscous hypersonic blunt body flows with an impinging shock

A complex two-dimensional, unsteady, viscous hypersonic shock wave interaction is numerically simulated by a high-resolution, second-order fully implicit shock-capturing scheme. The physical model consists of a nonstationary oblique shock impinging on the bow shock of a blunt body. Studies indicated that the unsteady flow patterns are slightly different from their steady counterparts. However, for the sample cases investigated the peak surface pressures for the unsteady flows seem to occur at very different impingement locations than for the steady flow cases.

Klopfer, G. H.↗