Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “publishing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

An ensemble of ocean reanalyses for 1815-2013 with sparse observational input

This paper describes a new eight-member ensemble of ocean reanalyses spanning nearly 200 years from 1815 to 2013 generated using the Simple Ocean Data Assimilation system with sparse observational input (SODAsi) to explore long-term changes in the oceans. The eight ensemble members assimilate surface temperature observations and use surface boundary conditions from an atmospheric reanalysis that is loosely coupled to the ocean reanalysis. In this work, both surface and subsurface quantities, such as dynamic height and heat content, show a broad spectrum of variability. Surface temperature trends from 1815 to 2013 are positive in most regions, with some important exceptions; the central Tropical Pacific, around Antarctica, and in the Gulf Stream and Kuroshio extension regions all show cooling trends. A near-global average shows warming of about 0.8°C over the full period, with most of the warming occurring after 1920. There is pronounced multidecadal variability in both the midlatitude and tropical oceans. In the North Atlantic Ocean, temperature variability is highly correlated with the meridional overturning stream function, with the largest correlation occurring when the stream function is advanced by 9 years. Trends of upper ocean heat content and dynamic height from the 1950s onward compare well with previously published values. Globally averaged heat content of the upper 700 m shows a nearly linear rise after the 1920s, requiring a net downward surface heat flux increase of 0.47 W m -2 into the ocean. This is close to published estimates of the increased flux required to explain the heat content increase from 1971 to 2010.

54 ENVIRONMENTAL SCIENCES↗

Upgrading Fast Pyrolysis Liquids

The liquid formed by the fast pyrolysis (FP) of biomass is commonly termed bio-oil. Biomass is converted to bio-oil through FP at 400-550°C typically at 1 atm. During FP, the biomass is held at temperature for a residence time on the order of 1-2 seconds. FP is beneficial from the standpoint that a large portion of the total mass and carbon contained in the biomass is converted and retained in the liquid bio-oil fraction. However, bio-oil is acidic, viscous, and thermally unstable. Bio-oil must be upgraded in order to be considered as a liquid transportation fuel or separated and further treated to produce value-added chemicals. Bio-oil is generally regarded as difficult to upgrade due to its thermal instability and chemical complexity which is derived in part from the incorporation of highly reactive species such as aldehydes and terminal olefins as well as the presence of sugars and anhydrosugar species which undergo secondary polymerization reactions when heated. Upgrading strategies considered in this chapter include methods to stabilize and deoxygenate bio-oil through low temperature hydroprocessing to stabilize bio-oil followed by higher temperature “deep hydrotreating” to remove the majority of oxygen present; converting bio-oil catalytically (often with zeolites such as HZSM-5) prior to condensation with catalysts inside the FP reactor or in a separate fixed or fluidized bed after the FP reactor; catalytic cracking with acid catalysts such as zeolites after condensation; or through physical or chemical separations to improve bio-oil stability, extract valuable chemicals, or produce H¬2. Bio-oil upgrading by co-processing with refinery streams such as vacuum gas oil in a fluid catalytic cracking (FCC) unit in a refinery has also been investigated. Numerous excellent reviews, perspectives and other chapters have been published in the preceding 7 years.[1-10] Reviews specific to individual sections within this chapter are at the beginning of the individual sections. This chapter is intended as an update to the original article authored by Prof. Anthony V. Bridgwater, Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, First Edition, Edited by Robert C. Brown, © 2011 John Wiley & Sons, Ltd. We gratefully acknowledge the original contribution by Prof. Bridgwater and have kept much of his original discussions intact with updated references. The scope of this updated chapter includes references published since about 2010. In the interest of space many of the original references included in the original version were not included. Thus, Prof. Bridgwater’s original chapter should be viewed as a companion to this updated chapter to provide a holistic set of references to the numerous bio-oil upgrading processes discussed herein.

Albrecht, Karl O.↗

MPMC and MCMD: Free High-Performance Simulation Software for Atomistic Systems

Advancements in parallel computing and hardware have allowed computational exploration of chemical systems of interest with unprecendented accuracy and efficiency. The typical development of molecular simulation software is initially inspired by a particular scientific inquiry. The softwares presented herein, MPMC (Massively Parallel Monte Carlo) and MCMD (Monte Carlo/Molecular Dynamics) were born out of a pursuit to simulate condensed phase physical and chemical interactions in porous materials. MPMC first began in 2005 and has been used for dozens of published results in the literature but has not yet been introduced in a standalone paper. MCMD is a more recent expansion and re-write with some published work, focused on adding molecular dynamics algorithms for transport and other time-dependent properties of chemical systems. Each software functions as a standalone with some unique and other overlapping features. Here, a driving aim of this work is to consider periodic, long-range polarization effects in classical simulation, and both codes are optimized to perform such calculations. Sample results will be presented which highlight methodically that inclusion of explicit polarization produces simulation results with predictive power which in general are in greater agreement with experiment than non-polarizable analogous simulations.

97 MATHEMATICS AND COMPUTING↗

Experimental and computational design tools for industrial drying processes: Challenges in process‐limit prediction

Abstract The coating and drying of inks and slurries are important steps to manufacture a plethora of products. Drying processes, particularly, comprise energy‐intensive steps that affect product cost and quality. Prior work has highlighted failures of various multicomponent diffusivity models to conserve mass in dryer modeling and challenges in predicting process limits given variability in published values of key thermodynamic parameters. Herein, we develop a computational model and benchtop drying experiments to investigate these concerns for drying polymer‐laden coatings. Model predictions of process limits in a single‐zone drying oven demonstrate that published variability in Flory–Huggins parameter yields large variations in predicted operating temperatures above which blistering occurs. This indicates that caution should be exercised when choosing approaches to obtain or predict the Flory–Huggins parameter, and that both benchtop drying experiments and a set of additional experiments, such as sorption experiments, are needed to fully characterize and optimize a given drying process.

Parrish, Chance↗

A Microkinetic Model of Calcite Step Growth

In spite of decades of research, mineral growth models based on ion attachment and detachment rates fail to predict behavior beyond a narrow range of conditions. Here we present a microkinetic model that accurately reproduces calcite growth over a very wide range of published experimental data for solution composition, saturation index, pH and impurities. We demonstrate that polynuclear complexes play a central role in mineral growth at high supersaturation and that a classical complexation model is sufficient to reproduce measured rates. Dehydration of the attaching species, not the mineral surface, is rate limiting. Density functional theory supports our conclusions. The model provides new insights into the molecular mechanisms of mineral growth that control biomineralization, mineral scaling and industrial material synthesis.

Andersson, M P.↗

Maturation of biomass‐to‐biofuels conversion technology pathways for rapid expansion of biofuels production: a system dynamics perspective

Abstract The Biomass Scenario Model ( BSM ) is a system‐dynamics simulation model intended to explore the potential for rapid expansion of the biofuels industry. The model is not predictive — it uses scenario assumptions based on various types of data to simulate industry development, emphasizing how incentives and technological learning‐by‐doing might accelerate industry growth. The BSM simulates major sectors of the biofuels industry, including feedstock production and logistics, conversion, distribution, and end uses, as well as interactions among sectors. The model represents conversion of biomass to biofuels as a set of technology pathways, each of which has allowable feedstocks, capital and operating costs, allowable products, and other defined characteristics. This study and the BSM address bioenergy modeling analytic needs that were identified in recent literature reviews. Simulations indicate that investments are most effective at expanding biofuels production through learning‐by‐doing when they are coordinated with respect to timing, pathway, and target sector within the biofuels industry. Effectiveness metrics include timing and magnitude of increased production, incentive cost and cost effectiveness, and avoidance of windfall profits. Investment costs and optimal investment targets have inherent risks and uncertainties, such as the relative value of investment in more‐mature versus less mature pathways. These can be explored through scenarios, but cannot be precisely predicted. Dynamic competition, including competition for cellulosic feedstocks and ethanol market shares, intensifies during times of rapid growth. Ethanol production increases rapidly, even up to Renewable Fuel Standards‐targeted volumes of biofuel, in simulations that allow higher blending proportions of ethanol in gasoline‐fueled vehicles. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Biofuels, Bioproducts, Biorefining published by John Wiley & Sons, Ltd on behalf of Society of Chemical Industry.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The impact of biotechnological advances on the future of US bioenergy

Abstract Modern biotechnology has the potential to substantially advance the feasibility, structure, and efficiency of future biofuel supply chains. Advances might be direct or indirect. A direct advance would be improving the efficiency of biochemical conversion processes and feedstock production. Direct advances in processing may involve developing improved enzymes and bacteria to convert lignocellulosic feedstocks to ethanol. Progress in feedstock production could include enhancing crop yields via genetic modification or the selection of specific natural variants and breeds. Other direct results of biotechnology might increase the production of fungible biofuels and bioproducts, which would impact the supply chain. Indirect advances might include modifications to dedicated bioenergy crops that enable them to grow on marginal lands rather than land needed for food production. This study assesses the feasibility and advantages of near‐future (10‐year) biotechnological developments for a US biomass‐based supply chain for bioenergy production. We assume a simplified supply chain of feedstock, logistics and land use, conversion, and products and utilization. The primary focus is how likely developments in feedstock production and conversion technologies will impact bioenergy and biofuels in the USA ; a secondary focus is other innovative uses of biotechnologies in the energy arenas. The assessment addresses near‐term biofuels based on starch, sugar, and cellulosic feedstocks and considers some longer‐term options, such as oil‐crop and algal technologies. Published 2015. This article is a U.S. Government work and is in the public domain in the USA. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd

09 BIOMASS FUELS↗

Strategic supply system design – a holistic evaluation of operational and production cost for a biorefinery supply chain

Abstract Pioneer cellulosic biorefineries across the United States rely on a conventional feedstock supply system based on one‐year contracts with local growers, who harvest, locally store, and deliver feedstock in low‐density format to the conversion facility. While the conventional system is designed for high biomass yield areas, pilot scale operations have experienced feedstock supply shortages and price volatilities due to reduced harvests and competition from other industries. Regional supply dependency and the inability to actively manage feedstock stability and quality, provide operational risks to the biorefinery, which translate into higher investment risk. The advanced feedstock supply system based on a network of depots can mitigate many of these risks and enable wider supply system benefits. This paper compares the two concepts from a system‐level perspective beyond mere logistic costs. It shows that while processing operations at the depot increase feedstock supply costs initially, they enable wider system benefits including supply risk reduction (leading to lower interest rates on loans), industry scale‐up, conversion yield improvements, and reduced handling equipment and storage costs at the biorefinery. When translating these benefits into cost reductions per liter of gasoline equivalent ( LGE ), we find that total cost reductions between –$0.46 to –$0.21 per LGE for biochemical and –$0.32 to –$0.12 per LGE for thermochemical conversion pathways are possible. Naturally, these system level benefits will differ between individual actors along the feedstock supply chain. Further research is required with respect to depot sizing, location, and ownership structures. Published 2015. This article is a U.S. Government work and is in the public domain in the USA. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Simulating and evaluating best management practices for integrated landscape management scenarios in biofuel feedstock production: Evaluating Best Management Practices for Biofuel Feedstock Production

Sound crop and land management strategies can maintain land productivity and improve the environmental sustainability of agricultural crop and feedstock production. This study evaluates the improvement of water sustainability through an integrated landscaping management strategy, where landscaping design, land management operations, crop systems, and agricultural best management practices (BMPs) play equal roles. The strategy was applied to the watershed of the South Fork Iowa River in Iowa, with a focus on implementing riparian buffers and converting low productivity land to provide cellulosic biomass while benefiting soil and water quality. The Soil and Water Assessment Tool (SWAT) was employed to simulate the impact of integrated landscape design on nutrients, suspended sediments, and flow on the watershed and subbasin scales. First, the study evaluated the representation of buffer strip as a vegetative barrier and as a riparian buffer using trapping efficiency and area ratio methods in SWAT. For the riparian buffer, the area ratio method tends to be more conservative, especially in nitrate loadings, while the trapping efficiency method generates more optimistic results. The differences between the two methods increase with buffer width. The two methods may not be comparable for the field-scale vegetative barrier simulation because of limitations in model spatial resolution. Landscape scenarios were developed to quantify water quality under (1) current land use, (2) partial land conversion to switchgrass, and (3) riparian buffer implementation. Results show that when low productivity land (15.2% of total watershed land area) is converted to grow switchgrass, suspended sediment, total nitrogen, total phosphorus, and nitrate loadings are reduced by 69.3%, 55.5%, 46.1%, and 13.4%, respectively, in the watershed surface streams. The reduction was less extensive when riparian buffer strips (30 m or 50 m) were applied to the stream network at 1.4% of total land area in the watershed. At the subbasin level, the degree of nutrient and suspended sediment reduction varies extensively, ranging from a few percent up to 55%. Results indicate that effective landscape design on current agricultural land can potentially bring marked improvements in water quality and soil erosion control while producing food and fuel feedstock in the South Fork Iowa River watershed. The concept can be integrated with other watershed management programs to improve sustainability of land, water, and the ecosystem.

bioenergy production↗

Conceptual process design and economics for the production of high-octane gasoline blendstock via indirect liquefaction of biomass through methanol/dimethyl ether intermediates

This paper describes in detail one potential conversion process for the production of high-octane gasoline blendstock via indirect liquefaction of biomass. The processing steps of this pathway include the conversion of biomass to synthesis gas via indirect gasification, gas clean-up via reforming of tars and other hydrocarbons, catalytic conversion of syngas to methanol, methanol dehydration to dimethyl ether (DME), and the homologation of DME over a zeolite catalyst to high-octane gasoline-range hydrocarbon products. The current process configuration has similarities to conventional methanol-to-gasoline (MTG) technologies, but there are key distinctions, specifically regarding the product slate, catalysts, and reactor conditions. A techno-economic analysis is performed to investigate the production of high-octane gasoline blendstock. The design features a processing daily capacity of 2000 tonnes (2205 short tons) of dry biomass. The process yields 271 liters of liquid fuel per dry tonne of biomass (65 gal/dry ton), for an annual fuel production rate of 178 million liters (47 MM gal) at 90% on-stream time. The estimated total capital investment for an nth-plant is $438 million. The resulting minimum fuel selling price (MFSP) is $0.86 per liter or $3.25 per gallon in 2011 US dollars. A rigorous sensitivity analysis captures uncertainties in costs and plant performance. Sustainability metrics for the conversion process are quantified and assessed. The potential premium value of the high-octane gasoline blendstock is examined and found to be at least as competitive as fossil-derived blendstocks. A simple blending strategy is proposed to demonstrate the potential for blending the biomass-derived blendstock with petroleum-derived intermediates. Published 2015. This article is a U.S. Government work and is in the public domain in the USA. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Environmental and cost benefits of multi‐purpose buffers in an agricultural watershed for biomass production

Abstract The cost‐benefit of riparian buffers to landowners has not been fully understood despite its ecosystem benefits. This study investigates the environmental and economic value of multi‐purpose buffers for biomass production under alternative land‐management scenarios at the watershed scale. The work incorporates the Soil and Water Assessment Tool with a field‐scale tool, the Agriculture Conservation Practice Framework, and cost‐benefit analysis. Our work took place in the agriculturally dominant Raccoon River watershed (RRW) in Iowa. The cost analysis includes implementing and harvesting the switchgrass buffers, the value of nitrogen and phosphorus fertilizer, and the forgone income of cropland to determine the net return under 12 alternative feedstock scenarios. We estimated that 14 603 Mg of nitrogen and 2563 Mg of phosphorus runoffs can be intercepted by riparian buffers in the RRW, representing a nutrient loss reduction of 11% of nitrogen and 26% of phosphorus. These nutrients are valued at $1.31 million (M) for phosphorus and $1.24 M for nitrogen as fertilizers. The trapped nutrients account for 12% of the riparian buffers’ total cost. We found that net economic returns increase with biomass market price, increase with maintenance fertilizer application, and decrease with the cropland areas that are converted to buffers. Under current land management, a biomass market price at $60 per dry ton of biomass would be economically viable at the sub‐basin level when maintenance fertilizers are applied. At $80 per dry ton, all 108 sub‐basins in the RRW would be profitable up to $517 a year. The results highlight the trade‐offs between water quality and profitability. Published 2021. This article is a U.S. Government work and is inthe public domain in the USA. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Effect of biomass liquefaction on glucose and xylose prices predicted by National Renewable Energy Laboratory biochemical sugar model

Abstract The National Renewable Energy Laboratory (NREL) published a model in 2017 that enables the minimum selling price of lignocellulosic sugar to be calculated. The model can be modified to suit any biomass feedstock and operational design. In the present case, the model is used to understand the economics of a process configuration that incorporates liquefaction as a preprocessing step in corn‐stover‐fed biorefinery. This study demonstrates a quantitative approach utilizing an existing biorefinery setup to simulate the biomass liquefaction technique while estimating the price of the resulting sugar product. The objective is to understand whether the addition of liquefaction methodology – and the substitution of acid pretreatment – can reduce the cost of lignocellulosic sugars. The reason for setting up a liquefaction unit at the start is to reduce the yield stress of biomass slurry so that the flow remains unrestricted downstream. The liquefaction process is also unique because it uses no chemicals and saves the cost of pretreatment. The pretreatment step is bypassed because the output of liquefaction can be fed into enzyme hydrolysis just after simple cooking. The liquefaction process can be performed in three modes: enzyme, enzyme mimetic, and a combination of enzyme and enzyme mimetic. The results from the BC1707 model indicate the minimum cost for the enzyme liquefaction route. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Language games: Advanced R & R packages: Book Review

Readers who wrangle answers from data by extended refinement of available computational tools have many options and resources available. Inevitably, they will develop their own methods tailored to the problem at hand.Two new books have recently been published, each of which is useful addition to the library for a scientist who programs with data. The two books reviewed are both written by H. Wickham. The titles are ''Advanced R'' and ''R Packages'', both published in 2015.

97 MATHEMATICS AND COMPUTING↗

Disturbance, complexity, and succession of net ecosystem production in North America’s temperate deciduous forests

Century-old forests in the U.S. upper Midwest and Northeast power much of North Amer- ica’s terrestrial carbon (C) sink, but these forests’ production and C sequestration capacity are expected to soon decline as fast-growing early successional species die and are replaced by slower growing late successional species. But will this really happen? Here we marshal empirical data and ecological theory to argue that substantial declines in net ecosystem production (NEP) owing to reduced forest growth, or net primary production (NPP), are not imminent in regrown temperate deciduous forests over the next several decades. Forest age and production data for temperate deciduous forests, synthesized from published literature, suggest slight declines in NEP and increasing or stable NPP during middle successional stages. We revisit long-held hypotheses by EP Odum and others that suggest low-severity, high-frequency disturbances occurring in the region’s aging forests will, against intuition, maintain NEP at higher-than- expected rates by increasing ecosystem complexity, sustaining or enhancing NPP to a level that largely o sets rising C losses as heterotrophic respiration increases. This theoretical model is also supported by biological evidence and observations from the Forest Accelerated Succession Experiment in Michigan, USA. Ecosystems that experience high-severity disturbances that simplify ecosystem complexity can exhibit substantial declines in production during middle stages of succession. However, observations from these ecosystems have exerted a disproportionate in uence on assumptions regarding the trajectory and magnitude of age-related declines in forest production. We conclude that there is a wide ecological space for forests to maintain NPP and, in doing so, lessens the declines in NEP, with signi cant implications for the future of the North American carbon sink. Our intellectual frameworks for understanding forest C cycle dynamics and resilience need to catch up to our more complex and nuanced understanding of ecological succession.

ecological theory↗

Artificial viscosity: back to the basics

Summary In this paper, we take a different perspective on the derivation of artificial viscosity. Heretofore, the development of artificial viscosity has been based on the paper published in Journal of Applied Physics in 1950 authored by John von Neumann and Robert Richtmyer [1]. Earlier, in 1948, Richtmyer published a report at Los Alamos Scientific Laboratory documenting the original concept [2]. This report was the true origin of shock capturing methods and contains several key ideas that are conceptually different than the 1950 journal article. Unfortunately, this report (LA‐671) was classified until 1993. This has resulted in two issues: the misattribution of the invention of artificial viscosity as primarily being the work of von Neumann and the loss of the structurally different ideas in the original report. We seek to right the record of history here and use the ideas contained in Richtmyer's report to good effect in deriving a new shock viscosity. The focus of previous development has been the Hugoniot curve describing the locus of states connected by a single shock wave. Here we follow a path more focused upon the Rayleigh line, which is strongly guided by Richtmyer's line of development of the original artificial viscosity formulation. We provide an implementation of the method resulting from this perspective and computational results for simple shock problems. Copyright © 2014 John Wiley & Sons, Ltd.

Mattsson, Ann E.↗

Nutrient uptake and mineralization during leaf decay in streams - a model simulation

We developed a stoichiometrically explicit computer model to examine how heterotrophic uptake of nutrients and microbial mineralization occurring during the decay of leaves in streams may be important in modifying nutrient concentrations. The simulations showed that microbial uptake can substantially decrease stream nutrient concentrations during the initial phases of decomposition, while mineralization may produce increases in concentrations during later stages of decomposition. The simulations also showed that initial nutrient content of the leaves can affect the stream nutrient concentration dynamics and determine whether nitrogen or phosphorus is the limiting nutrient. Finally, the simulations suggest a net retention (uptake > mineralization) of nutrients in headwater streams, which is balanced by export of particulate organic nutrients to downstream reaches. Published studies support the conclusion that uptake can substantially change stream nutrient concentrations. On the other hand, there is little published evidence that mineralization also affects nutrient concentrations. Also, there is little information on direct microbial utilization of nutrients contained in the decaying leaves themselves. Our results suggest several directions for research that will improve our understanding of the complex relationship between leaf decay and nutrient dynamics in streams.

54 ENVIRONMENTAL SCIENCES↗

Changes in Distal Tibial Microarchitecture During Eight Weeks of U.S. Army Basic Combat Training Differ by Sex and Race

ABSTRACT Basic combat training (BCT) is a physically rigorous period at the beginning of a soldier's career that induces bone formation in the tibia. Race and sex are determinants of bone properties in young adults but their influences on changes in bone microarchitecture during BCT are unknown. The purpose of this work was to determine the influence of sex and race on changes in bone microarchitecture during BCT. Bone microarchitecture was assessed at the distal tibia via high‐resolution peripheral quantitative computed tomography at the beginning and end of 8 weeks of BCT in a multiracial cohort of trainees (552 female, 1053 male; mean ± standard deviation [SD] age = 20.7 ± 3.7 years) of which 25.4% self‐identified as black, 19.5% as race other than black or white (other races combined), and 55.1% as white. We used linear regression models to determine whether changes in bone microarchitecture due to BCT differed by race or sex, after adjusting for age, height, weight, physical activity, and tobacco use. We found that trabecular bone density (Tb.BMD), thickness (Tb.Th), and volume (Tb.BV/TV), as well as cortical BMD (Ct.BMD) and thickness (Ct.Th) increased following BCT in both sexes and across racial groups (+0.32% to +1.87%, all p < 0.01). Compared to males, females had greater increases in Tb.BMD (+1.87% versus +1.40%; p = 0.01) and Tb.Th (+0.87% versus +0.58%; p = 0.02), but smaller increases in Ct.BMD (+0.35% versus +0.61%; p < 0.01). Compared to black trainees, white trainees had greater increases in Tb.Th (+0.82% versus +0.61%; p = 0.03). Other races combined and white trainees had greater increases in Ct.BMD than black trainees (+0.56% and + 0.55% versus +0.32%; both p ≤ 0.01). Changes in distal tibial microarchitecture, consistent with adaptive bone formation, occur in trainees of all races and sexes, with modest differences by sex and race. Published 2023. This article is a U.S. Government work and is in the public domain in the USA. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Hughes, Julie M.↗

Mode-specific pressure effects on the relaxation of an excited nitromethane molecule in an argon bath

The vibrational and rotational mode-specific relaxations of CH 3 NO 2 with 50 kcal/mol of initial internal energy in an argon bath is computed at 300 K at pressures of 10-400 atm. This work uses archived information from our previously published [J. Chem. Phys. 142, 014303 (2015)] molecular dynamics simulations and employs our previous published [J. Chem. Phys. 151, 034303 (2019)] method for projecting time-dependent Cartesian velocities onto normal mode eigenvectors. The computed relaxations cover three types of energies: vibrational, rotational, and Coriolis. In general, rotational and Coriolis relaxations in all modes are initially fast followed by an orders of magnitude slower relaxation. For all modes, that slower relaxation rate is approximately comparable to the vibrational relaxation rate. For all three types of energies, there are small-scale mode-to-mode variations. Of particular prominence is the exceptionally fast relaxation shared in common by the external rotation about the C-N axis, the internal hindered rotation of the CH 3 group relative to the NO 2 group, and the symmetric stretch of the CH 3 group.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗