Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “physical optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Design, fabrication, and testing of a water-cooled tungsten-foam high-heat flux plasma-facing module

Here, we present a comprehensive study detailing the design, fabrication and testing a new modular “finger” component, featuring a hexagonal tungsten foam armor tile bonded to the top surface of the water-cooled finger unit. The mechanical, thermal, and particle transport properties of the tungsten foam armor were determined for a wide range of porosity and cell size, and then combined in an equivalent solid material with “effective” properties suitable for large-scale simulations. A series of 3-D multiphysics simulations for coupled thermal and mechanical behavior of the “finger” module are used to optimize the design before fabrication. The simulation results show that, for the expected experimental conditions, a safe range of heat flux and foam porosity is possible for both water-cooling and helium-cooling. Based on these multiphysics simulations, an optimum finger cooling module has been fabricated at Ultramet, Inc. A series of experiments were designed to study the thermomechanical performance of the “finger” unit under steady-state and transient thermal loading at surface heat flux up to 16 MW/m 2 in the High Energy Flux Test facility (HEFTY) at UCLA. Testing conditions included low-power, steady-state plasma exposure at 6 MW/m 2 , followed by severe high heat flux cycles at 16 MW/m 2 . Results of these tests are explained through comparisons with multiphysics simulations. To eliminate the effects of thermomechanical damage carried out on a module on its thermo-mechanical response on a subsequent test, three different yet identically designed and fabricated finger modules were tested. The results show that the current design is capable of cooling the walls of fusion devices at surface heat flux up to 6 MW/m 2 without failure, and that the failure heat flux limit is below 16 MW/m 2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rapid data-driven model reduction of nonlinear dynamical systems including chemical reaction networks using ℓ 1 -regularization

We develop a new data-driven paradigm for efficient model reduction of a broad class of nonlinear dynamical systems. Our model reduction method directly enables the interpretation of key components of the dynamical system, unlike traditional projection-based model reduction methods that focus on reducing computational complexity more than interpretability. Our method is not application specific and is simple to implement on nonlinear dynamical systems arising from a variety of different fields. It requires minimal parameterization using a single parameter to trade-off between model complexity and estimation error. We use a data-driven paradigm to formulate model reduction as an efficient convex optimization problem that scales polynomially in the original size of the complex system, enabling systems with as many as thousands of components to be reduced in a matter of minutes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetohydrodynamics with physics informed neural operators

Abstract The modeling of multi-scale and multi-physics complex systems typically involves the use of scientific software that can optimally leverage extreme scale computing. Despite major developments in recent years, these simulations continue to be computationally intensive and time consuming. Here we explore the use of AI to accelerate the modeling of complex systems at a fraction of the computational cost of classical methods, and present the first application of physics informed neural operators (NOs) (PINOs) to model 2D incompressible magnetohydrodynamics (MHD) simulations. Our AI models incorporate tensor Fourier NOs as their backbone, which we implemented with the TensorLY package. Our results indicate that PINOs can accurately capture the physics of MHD simulations that describe laminar flows with Reynolds numbers Re ⩽ 250 . We also explore the applicability of our AI surrogates for turbulent flows, and discuss a variety of methodologies that may be incorporated in future work to create AI models that provide a computationally efficient and high fidelity description of MHD simulations for a broad range of Reynolds numbers. The scientific software developed in this project is released with this manuscript.

97 MATHEMATICS AND COMPUTING↗

From PINNs to PIKANs: recent advances in physics-informed machine learning

Physics-Informed Neural Networks (PINNs) have emerged as a key tool in Scientific Machine Learning since their introduction in 2017, enabling the efficient solution of ordinary and partial differential equations using sparse measurements. Over the past few years, significant advancements have been made in the training and optimization of PINNs, covering aspects such as network architectures, adaptive refinement, domain decomposition, and the use of adaptive weights and activation functions. A notable recent development is the Physics-Informed Kolmogorov-Arnold Networks (PIKANS), which leverage a representation model originally proposed by Kolmogorov in 1957, offering a promising alternative to traditional PINNs. In this review, we provide a comprehensive overview of the latest advancements in PINNs, focusing on improvements in network design, feature expansion, optimization techniques, uncertainty quantification, and theoretical insights. We also survey key applications across a range of fields, including biomedicine, fluid and solid mechanics, geophysics, dynamical systems, heat transfer, chemical engineering, and beyond. Lastly, we review computational frameworks and software tools developed by both academia and industry to support PINN research and applications.

Kolmogorov-Arnold networks↗

Optimization Methodology of Pebble Bed HTGR Start-Up and Running-in Strategy

In recent years interest in advanced reactor technologies has increased significantly. However, the methods used for analysis of traditional nuclear reactors are insufficient to consider all the different and varied advanced reactor designs without further development. One promising advanced reactor design is the pebble bed reactor (PBR). PBRs possess unique operational and fuel cycle features that require the development of specific analysis methodologies to adequately design and analyze the systems. There is a need in PBR research for a capability to analyze and optimize the process of transitioning from the start-up reactor core to the equilibrium core (known as the “running-in” of the reactor). The start-up of a PBR and the transition to the equilibrium core is a complex, multi-physics challenge that has not yet been well researched and has many opportunities for design, analysis, and optimization of the process. In this research, a methodology is defined to consider the potential strategies in PBR start-up and run-in to the equilibrium core. Multiple candidate software are considered, and their pros and cons are discussed for the PBR-specific application in the methodology. A preliminary software selection for the physics engine is made, and initial verification of key modules is performed. Software to support optimization of the reactor run-in strategies through reduced order modeling (ROM) and machine learning are considered. Challenges for a full implementation of the methodology are discussed. Additional code selections and verification of models relevant to the application are needed before full demonstration of the methodology can be achieved and an optimal strategy determined.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Machine learning for geophysical characterization of brittleness: Tuscaloosa Marine Shale case study

Brittleness is one of the most important reservoir properties for unconventional reservoir exploration and production. Better knowledge about the brittleness distribution can help to optimize the hydraulic fracturing operation and lower costs. However, there are very few reliable and effective physical models to predict the spatial distribution of brittleness. We have developed a machine learning-based method to predict subsurface brittleness by using multidiscipline data sets, such as seismic attributes, rock physics, and petrophysics information, which allows us to implement the prediction without using a physical model. The method is applied on a data set from Tuscaloosa Marine Shale, and the predicted rock physics template is close to the calculated value from conventional inverted elastic parameters. Therefore, the proposed method helps determine areas of the reservoir that have optimal geomechanical properties for successful hydraulic fracturing.

Geochemistry & Geophysics↗

Uncovering New Physics in the Cosmic Microwave Background: Developing Novel Theoretical Models and Machine-Learning-Powered Constraints

The search for evidence of new physics via its signatures in the cosmos is a cornerstone goal of the Office of High Energy Physics in the DOE Office of Science. Indeed, the current concordance cosmological model provides intriguing hints for beyond-the-standard-model (BSM) physics, such as dark matter and dark energy. Recently, a potential breakdown has appeared in this model, which could be initial evidence toward a further important revision in our fundamental theoretical understanding of cosmology. This breakdown is reflected in disagreements between inferences of the current expansion rate of the universe, H 0 (the Hubble constant), based on indirect, cosmological data (e.g., from the early universe) and based on direct, local measurements. Despite significant effort, a compelling new concordance cosmological model has yet to be found; achieving significant progress on this front was the first major focus of the project. Theoretical considerations indicate that if the observational discrepancies are not due to systematic errors, they strongly suggest new physics operating in the redshift range just prior to recombination, when cosmic microwave background (CMB) photons last scattered. Crucially, almost all such models produce unique signatures in the CMB temperature and polarization power spectra, which will be measured with unprecedented precision by ongoing and upcoming experiments, including the DOE-supported CMB-S4 project. However, these subtle hints of new physics must be uncovered from beneath a swath of Galactic and extragalactic foreground contamination. Current CMB analysis methods, although powerful, do not optimally infer the CMB power spectrum in the presence of non-Gaussian foregrounds. There is thus scope for theoretical improvement in this foundational challenge of cosmological inference, which formed the second major focus of the project. The primary objectives of the project were two-fold: (1) to develop new theoretical models in cosmology that can restore concordance amongst the full suite of cosmological data sets, thereby potentially providing evidence of novel BSM physics; (2) to develop new theoretical machinery to enable significant sensitivity improvements in searches for new physics in cosmology, particularly via the CMB power spectrum. The two objectives are intertwined, as the analysis methodology improvements in (2) will enable the tightest possible constraints on the signatures of new physics predicted by the novel scenarios in (1). The theoretical approaches to restore concordance focused on models involving novel scalar field dynamics in the pre-recombination universe (the “early dark energy” scenario and modifications thereof), as well as couplings between this field and other components in the standard cosmological model, such as dark matter. We also studied a model featuring a generalization of the decaying dark matter scenario, in which a sub-component of dark matter converts into dark radiation at late times in cosmic history. While these ideas are mostly driven by phenomenological considerations, this tactic has proven extremely successful in cosmology throughout the past few decades, including in the early history of evidence for dark matter and dark energy. The new theoretical machinery envisioned in (2) is undergirded by developments in signal processing and machine learning, which will enable improvements in CMB power spectrum estimation in the presence of non-Gaussian foreground contaminants. In turn, this will yield optimal sensitivity in searches for new physics in the CMB, by maximizing the cosmological information that is extracted from this observable. The most ambitious outcome of this work would be the construction of a new cosmological model that restores concordance amongst data sets. Although the individual models studied here did not fully achieve that goal, significant progress in narrowing down the model space was made, as described below. Moreover, the outcome of the methodological improvements in (2) will significantly impact a wide range of theoretical cosmology, by enabling the tightest possible constraints on any model that leaves novel signatures in the CMB temperature and polarization power spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of Ballistic Limit for IM7/8552 Using LS-DYNA MAT 261

The goal of the NASA ACC High Energy Dynamic Impact Project is to determine the state of the art of dynamic fracture simulations for high velocity impact for composite fuselage shielding applications. Using a building block approach, several computational models considered under NASA ACC are being validated against test data, starting at unconfigured panels and progressing to configured panels under combined out-of-plane and in-plane loading due to ballistic impact. The computational models being evaluated in this project include MAT 162, MAT 213, MAT 261, SPG, and Peridynamics. In this paper, the simulation results using LS-Dyna Material MAT 261 are presented. In particular, a series of blind predictions for unconfigured panels were performed to determine the ballistic limit or V50 velocity. MAT 261 employs failure approach that is generally physically-based using fracture toughness criteria. The overall material model relies on typical ply-level stiffness properties, similar to MAT 162 and other composite continuum damage material models. The fracture toughness values are based on standard tests, and thus are not subject to extensive calibration. This approach is more efficient than performing extensive optimization studies for calibration of parameters. Also, this approach of relying on physical properties reduces the uncertainty of results, as questions concerning the quality and extent of the calibration studies is no longer relevant. However, it was found that carefully controlled coupon-level tests are needed to accurately obtain the required fracture toughness values. Additionally, it should be noted that there is one significant parameter in MAT 261 that does appear to require calibration, and that is the overall failure strain. This is the strain at which the element is deleted, and is not the same as the strain at which damage begins to accumulate. This failure strain is termed EFS (Effective Failure Strain), and is the maximum effective stain for element failure. Simulations have shown that this value will significantly affect impact response and failure. The paper presents the effect of this element failure strain parameter, along with possible uncertainties in fracture toughness values. With an adjusted appropriate value for EFS, it is seen that simulation results compare well with impact test data for predicted penetration velocity.

Byar, Alan↗

Ultrafast radiographic imaging and tracking: An overview of instruments, methods, data, and applications

Ultrafast radiographic imaging and tracking (U-RadIT) use state-of-the-art ionizing particle and light sources to experimentally study sub-nanosecond transients or dynamic processes in physics, chemistry, biology, geology, materials science and other fields. These processes are fundamental to modern technologies and applications, such as nuclear fusion energy, advanced manufacturing, communication, and green transportation, which often involve one mole or more atoms and elementary particles, and thus are challenging to compute by using the first principles of quantum physics or other forward models. One of the central problems in U-RadIT is to optimize information yield through, e.g. high-luminosity X-ray and particle sources, efficient imaging and tracking detectors, novel methods to collect data, and large-bandwidth online and offline data processing, regulated by the underlying physics, statistics, and computing power. We review and highlight recent progress in: (a.) Detectors such as high-speed complementary metal-oxide semiconductor (CMOS) cameras, hybrid pixelated array detectors integrated with Timepix4 and other application-specific integrated circuits (ASICs), and digital photon detectors; (b.) U-RadIT modalities such as dynamic phase contrast imaging, dynamic diffractive imaging, and four-dimensional (4D) particle tracking; (c.) U-RadIT data and algorithms such as neural networks and machine learning, and (d.) Applications in ultrafast dynamic material science using XFELs, synchrotrons and laser-driven sources. Hardware-centric approaches to U-RadIT optimization are constrained by detector material properties, low signal-to-noise ratio, high cost and long development cycles of critical hardware components such as ASICs. Interpretation of experimental data, including comparisons with forward models, is frequently hindered by sparse measurements, model and measurement uncertainties, and noise. Alternatively, U-RadIT make increasing use of data science and machine learning algorithms, including experimental implementations of compressed sensing. Machine learning and artificial intelligence approaches, refined by physics and materials information, may also contribute significantly to data interpretation, uncertainty quantification and U-RadIT optimization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

PPPL Laboratory Directed Research and Development (Project Final Reports, FY2018 - FY2020)

The U.S. Department of Energy’s (DOE) Princeton Plasma Physics Laboratory (PPPL) is a collaborative national center for fusion energy science, basic sciences, and advanced technology. The Laboratory has three major missions: (1) to develop the scientific knowledge and advanced engineering to enable fusion to power the U.S. and the world; (2) to advance the science of nanoscale fabrication for technologies of tomorrow; and (3) to further the development of the scientific understanding of the plasma universe from laboratory to astrophysical scales. PPPL’s Laboratory Directed Research and Development (LDRD) program supports and encourages creativity and innovation and contributes to its long-term viability. New scientific and technical research areas emerge and are nurtured through the program. Furthermore, new capabilities are developed to enable the Laboratory to meet its and DOE’s missions. The program is used to systematically diversify the Laboratory’s programs and mission. In the last few years, the program has started projects in nanomaterial synthesis, microelectronics, advanced x-ray spectroscopy, high-energy-density physics, superconducting magnet technology, machine learning and artificial intelligence, 3D magnetic fields to optimize fusion plasmas, integration of permanent magnets with simple high-field magnets to reduce the cost of producing complex 3D magnetic fields, advanced computational methods for predictive understanding and control of fusion plasma, development of quantum computing algorithms for plasma physics, liquid metal plasma-facing components for fusion reactors, virtual engineering, and plasma-based space propulsion. The program is also the vehicle to recruit and train talented scientists and engineers with the new skills needed to perform the Laboratory’s mission. Many of the new hires through the program go on to become world-class scientists and engineers in their fields. This report provides descriptions and accomplishments of those LDRD projects that were completed during fiscal years 2018 through 2020.

36 MATERIALS SCIENCE↗

A Tchebycheff-based multi-objective combined with a PSO–SQP dynamic real-time optimization framework for cycling energy systems

The aim in this work is to develop an optimization framework to address cycling of baseload energy systems due to the penetration of renewables into the grid. The developed strategy corresponds to a multi-objective and dynamic real-time optimization (MOO-DRTO) framework applied to a postcombustion MEA-based CO 2 capture process from a baseload coal-fired power plant under cycling conditions. A Tchebycheff-based method is used for the multi-objective optimization (MOO) component. Also, a hybrid approach consisting of Particle Swarm Optimization (PSO) and Sequential Quadratic Programming (SQP) is implemented for the first time in process systems engineering to solve the dynamic real-time optimization (DRTO) component. The objectives considered in the MOO-DRTO framework are economic and environmental. The proposed MOO-DRTO strategy is successfully implemented and 24-h optimal output trajectories for the carbon capture system under cycling are generated. Also, the optimal compromise is chosen from the Pareto front according to a set of selected weights for the objectives with minimal interaction between the framework and decision maker. The results indicated that the developed framework has potential to be extended to plant-wide optimization applications under cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE-NE LWRS Integrated Program Plan - Physical Security Pathway

Domestic nuclear power is facing increased financial pressures from a variety of areas and there is pressure on these utilities to reduce their cost of operation. Currently, about 20%-30% of all on-site personnel are related to physical security. The LWRS Program recognized that R&D related to physical security could play a role in providing nuclear utilities technical and staffing efficiency options to meet their physical security commitments, but utilities often lack the technical basis or the ability to create the technical basis to realize or implement these efficiencies; towards this end, the LWRS Program created the Physical Security Pathway in September 2019. The pathway performs R&D to develop methods, tools, and technologies to optimize and modernize a nuclear power facility’s security posture. The pathway will: (1) conduct research on risk-informed techniques for physical security that account for a dynamic adversary; (2) apply advanced modeling and simulation tools to better inform physical-security scenarios and reduce uncertainties in force-on-force modeling; (3) assess benefits from proposed enhancements and novel mitigation strategies and explore changes to best practices, guides, or regulation to enable modernization; and (4) enhance and provide the technical basis for stakeholders to employ new security methods, tools, and technologies.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Multiphysics simulations of Self-Regulating performance of an optimized molten metal fuel microreactor design

Advanced microreactors are expected to play an indispensable role in reliable energy solutions for civilian/ military applications in off-grid regions and space applications such as power supplies for Lunar and Mars bases. An innovative fast neutron spectrum heat pipe microreactor (HP-MR) concept was recently proposed with two unique features: molten U-Mn fuel and heat pipes as the heat removal mechanism. The microreactor was designed to be self-regulated, solely relying on reactivity feedbacks from fuel temperature. The reactor design has been further optimized to provide sufficient engineering safety margin and effective heat removal. In this study, the self-regulating performance of the optimized molten metal fuel microreactor was investigated by multi-physics simulations (neutronics, heat-transfer and heat pipe modeling) based on the MOOSE MultiApps system. In conclusion, the responses of the reactor to a series of transient scenarios were simulated to demonstrate the exceptional and inherent safety features of the novel microreactor concept.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Dissipation and Bathymetric Sensitivities in an Unstructured Mesh Global Tidal Model

Abstract The mechanisms and geographic distribution of global tidal dissipation in barotropic tidal models are examined using a high resolution unstructured mesh finite element model. Mesh resolution varies between 2 and 25 km and is especially focused on inner shelves and steep bathymetric gradients. Tidal response sensitivities to bathymetric changes are examined to put into context response sensitivities to frictional processes. We confirm that the Ronne Ice Shelf dramatically affects Atlantic tides but also find that bathymetry in the Hudson Bay system is a critical control. We follow a sequential frictional parameter optimization process and use TPXO9 data‐assimilated tidal elevations as a reference solution. From simulated velocities and depths, dissipation within the global model is estimated and allows us to pinpoint dissipation at high resolution. Boundary layer dissipation is extremely focused with 1.4% of the ocean accounting for 90% of the total. Internal tide friction is much more distributed with 16.7% of the ocean accounting for 90% of the total. Often highly regional dissipation can impact basin‐scale and even ocean wide tides. Optimized boundary layer friction parameters correlate very well with the physical characteristics of the locality with high friction factors associated with energetic tidal regions, deep ocean island chains, and ice covered areas. Global complex M 2 tide errors are 1.94 cm in deep waters. Total global boundary layer and internal tide dissipation are estimated, respectively, at 1.83 and 1.49 TW. This continues the trend in the literature toward attributing more dissipation to internal tides.

54 ENVIRONMENTAL SCIENCES↗

Bright and durable scintillation from colloidal quantum shells

Abstract Efficient, fast, and robust scintillators for ionizing radiation detection are crucial in various fields, including medical diagnostics, defense, and particle physics. However, traditional scintillator technologies face challenges in simultaneously achieving optimal performance and high-speed operation. Herein we introduce colloidal quantum shell heterostructures as X-ray and electron scintillators, combining efficiency, speed, and durability. Quantum shells exhibit light yields up to 70,000 photons MeV −1 at room temperature, enabled by their high multiexciton radiative efficiency thanks to long Auger-Meitner lifetimes (>10 ns). Radioluminescence is fast, with lifetimes of 2.5 ns and sub-100 ps rise times. Additionally, quantum shells do not exhibit afterglow and maintain stable scintillation even under high X-ray doses (>10 9 Gy). Furthermore, we showcase quantum shells for X-ray imaging achieving a spatial resolution as high as 28 line pairs per millimeter. Overall, efficient, fast, and durable scintillation make quantum shells appealing in applications ranging from ultrafast radiation detection to high-resolution imaging.

47 OTHER INSTRUMENTATION↗

Modulation-slippage trade-off in resonant four-wave upconversion

Following up on a proposal to use four-wave mixing in an underdense plasma at mildly relativistic laser intensities to produce vastly more energetic x-ray pulses [V. M. Malkin and N. J. Fisch, Phys. Rev. E, 101, 023211 (2020)], we perform the first numerical simulations in one dimension to illustrate amplification of a short high frequency seed through four-wave mixing. Here, we illustrate how parasitic processes including phase modulation and spatial pulse slippage limit the amplification efficiency. Although the regimes studied were not where the optimal efficiencies were expected, these regimes do expose the basic physical processes at play, while still yielding not insignificant spectral power upshift.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗