Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

A high-energy and long-cycling lithium–sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites

Lithium-sulfur batteries are attractive alternatives to lithium-ion batteries because of their high theoretical specific energy and natural abundance of sulfur. However, the practical specific energy and cycle life of Li-S pouch cells are significantly limited by the use of thin sulfur electrodes/flooded electrolytes and polysulfides shuttle/Li metal degradation, respectively. In this work we propose a cathode design concept to achieve good Li-S pouch cell performances. The cathode is composed of uniformly embedded ZnS nanoparticles and Co-N-C single-atom catalyst to form double-end biding sites inside a highly oriented macroporous host, which can effectively immobilize and catalytically convert polysulfides intermediates during cycling, thus eliminating the shuttle effect and lithium metal corrosion. The ordered macropores enhance ionic transport under high sulfur loading by forming sufficient catalyst/conductive support/electrolyte triple-phase boundaries. This prevents the formation of inactive sulfur (dead sulfur). Our cathode structure shows improved performances in a pouch cell configuration under high sulfur loading and lean electrolyte operation. An Ah-level pouch cell with only 100% lithium excess can deliver a cell specific energy of > 300 Wh kg –1 with a Coulombic efficiency >95% for 80 cycles.

25 ENERGY STORAGE↗

Superdislocations and point defects in pyrochlore Yb2Ti2O7 single crystals and implication on magnetic ground states

Abstract This study reports atomic-scale characterization of structural defects in Yb 2 Ti 2 O 7, a pyrochlore oxide whose subtle magnetic interactions is prone to small perturbations. Due to discrepancies in the reported magnetic ground states, it has become a pressing issue to determine the nature of defects in this system. In the present study, we use atomic resolution scanning transmission electron microscopy techniques to identify the type of defects in the ytterbium titanate single crystals grown by the conventional optical floating zone (FZ) method. In addition to the known point defects of substitution Yb on Ti B-sites, extended defects such as dissociated superdislocations and anti-phase boundaries were discovered for the first time in this material. Such defects were prevalently observed in the FZ grown single crystals (of a darker color), in contrast to the stoichiometric white polycrystalline powders or high quality colorless single crystals grown by the traveling solvent floating zone technique. The lattice strains from these extended defects result in distortions of Yb-tetrahedron. A change of Ti valance was not detected at the defects. Our findings provide new insights into understanding the nature of defects that are of great importance for the physical property studies of geometrically frustrated compounds. Furthermore, this work sheds light on the complicated core structure of superdislocations that have large Burgers vectors in oxides with complex unit cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of interfacial strength in nacre-mimicking tungsten heavy alloys for nuclear fusion applications

Abstract Tungsten heavy alloys have been proposed as plasma facing material components in nuclear fusion reactors and require experimental investigation in their confirmation. For this purpose, a 90W–7Ni–3Fe alloy has been selected and microstructurally manipulated to present a multiphase brick-and-mortar structure of W-phase ‘bricks’ surrounded by a ductile ‘mortar’. This work draws inspiration from nature to artificially imitate the extraordinary combination of strength and stiffness exhibited by mollusks and produce a nacre-mimicking metal matrix composite capable of withstanding the extremely hostile environment of the reactor interior and maintaining structural integrity. The underlying mechanisms behind this integrity have been probed through high-resolution structural and chemical characterization techniques and have revealed chemically diffuse phase boundaries exhibiting unexpected lattice coherency. These features have been attributed to an increase in the energy required for interfacial decohesion in these systems and the simultaneous expression of high strength and toughness in tungsten heavy alloys.

36 MATERIALS SCIENCE↗

High-rate electroreduction of carbon monoxide to multi-carbon products

Carbon monoxide electrolysis has previously been reported to yield enhanced multi-carbon (C 2+ ) Faradaic efficiencies of up to ~55%, but only at low reaction rates. This is due to the low solubility of CO in aqueous electrolytes and operation in batch-type reactors. Here, we present a high-performance CO flow electrolyser with a well controlled electrode–electrolyte interface that can reach total current densities of up to 1 A cm –2 , together with improved C 2+ selectivities. Computational transport modelling and isotopic C 18 O reduction experiments suggest that the enhanced activity is due to a higher surface pH under CO reduction conditions, which facilitates the production of acetate. Here, at optimal operating conditions, we achieve a C 2+ Faradaic efficiency of ~91% with a C 2+ partial current density over 630 mA cm –2 . Further investigations show that maintaining an efficient triple-phase boundary at the electrode–electrolyte interface is the most critical challenge in achieving a stable CO/CO 2 electrolysis process at high rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large electromechanical strain and unconventional domain switching near phase convergence in a Pb-free ferroelectric

In many ferroelectrics, large electromechanical strains are observed near regions of composition- or temperature- driven phase coexistence. Phenomenologically, this is attributed to easy re-orientation of the polarization vector and/or phase transition, although their effects are highly convoluted and difficult to distinguish experimentally. Here, we used synchrotron X-ray scattering and digital image correlation to differentiate between the microscopic mechanisms leading to large electrostrains in an exemplary Pb-free piezoceramic Sn-doped barium calcium zirconate titanate. Large electrostrains of ~0.2% measured at room-temperature are attributed to an unconventional effect, wherein polarization switching is aided by a reversible phase transition near the tetragonal-orthorhombic phase boundary. Additionally, electrostrains of ~0.1% or more could be maintained from room temperature to 140°C due to a succession of different microscopic mechanisms. In situ X-ray diffraction elucidates that while 90° domain reorientation is pertinent below the Curie temperature ( T C ), isotropic distortion of polar clusters is the dominant mechanism above T C .

36 MATERIALS SCIENCE↗

Nanofiber Scaffold for Cathode of Solid Oxide Fuel Cell

A high performance solid oxide fuel cell cathode using the yttria-stabilized zirconia (YSZ) nanofibers scaffold with the infiltrated La1-xSrxMnO3 (LSM) shows an enhanced catalytic activity toward oxygen reduction. Such a cathode offers a continuous path for charge transport and an increased number of triple-phase boundary sites.

30 DIRECT ENERGY CONVERSION↗

Strain-induced alignment and phase behavior of blue phase liquid crystals confined to thin films

Here, we report on the influence of surface confinement on the phase behavior and strain-induced alignment of thin films of blue phase liquid crystals (BPs). Confining surfaces comprised of bare glass, dimethyloctadecyl [3-(trimethoxysilyl)propyl] ammonium chloride (DMOAP)-functionalized glass, or polyvinyl alcohol (PVA)-coated glass were used with or without mechanically rubbing to influence the azimuthal anchoring of the BPs. These experiments reveal that confinement can change the phase behavior of the BP films. For example, in experiments performed with rubbed-PVA surfaces, we measured the elastic strain of the BPs to change the isotropic–BPII phase boundary, suppressing formation of BPII for film thicknesses incommensurate with the BPII lattice. In addition, we observed strain-induced alignment of the BPs to exhibit a complex dependence on both the surface chemistry and azimuthal alignment of the BPs. For example, when using bare glass surfaces causing azimuthally degenerate and planar anchoring, BPI oriented with (110) planes of the unit cell parallel to the contacting surfaces for thicknesses below 3 μm but transitioned to an orientation with (200) planes aligned parallel to the contacting surfaces for thicknesses above 4 μm. In contrast, BPI aligned with (110) planes parallel to confining surfaces for all other thicknesses and surface treatments, including bare glass with uniform azimuthal alignment. Complementary simulations based on minimization of the total free energy (Landau–de Gennes formalism) confirmed a thickness-dependent reorientation due to strain of BPI unit cells within a window of surface anchoring energies and in the absence of uniform azimuthal alignment. In contrast to BPI, BPII did not exhibit thickness-dependent orientations but did exhibit orientations that were dependent on the surface chemistry, a result that was also captured in simulations by varying the anchoring energies. Overall, the results in this paper reveal that the orientations assumed by BPs in thin films reflect a complex interplay of surface interactions and elastic energies associated with strain of the BP lattice. The results also provide new principles and methods to control the structure and properties of BP thin films, which may find use in BP-templated material synthesis, and BP-based optical and electronic devices.

36 MATERIALS SCIENCE↗

Enhanced magnetism in lightly doped manganite heterostructures: strain or stoichiometry?

Lattice mismatch induced epitaxial strain has been widely used to tune functional properties in complex oxide heterostructures. Apart from the epitaxial strain, a large lattice mismatch also produces other effects including modulations in microstructure and stoichiometry. However, it is challenging to distinguish the impact of these effects from the strain contribution to thin film properties. Here, we use La 0.9 Sr 0.1 MnO 3 (LSMO), a lightly doped manganite close to the vertical phase boundary, as a model system to demonstrate that both epitaxial strain and cation stoichiometry induced by strain relaxation contribute to functionality tuning. The thinner LSMO films are metallic with a greatly enhanced T C which is 97 K higher than the bulk value. Such anomalies in T C and transport cannot be fully explained by the epitaxial strain alone. Detailed microstructure analysis indicates La deficiency in thinner films and twin domains formation in thicker films. Our results have revealed that both epitaxial strain and strain relaxation induced stoichiometry/microstructure modulations contribute to the modified functional properties in lightly doped manganite perovskite thin films.

36 MATERIALS SCIENCE↗

Investigation of n-type doping strategies for Mg 3 Sb 2

Recent, and somewhat surprising, successful n-type doping of Mg 3 Sb 2 was the key to realizing high thermoelectric performance in this material. Herein, we use first-principles defect calculations to investigate different extrinsic n-type doping strategies for Mg 3 Sb 2 and to reveal general chemical trends in terms of dopant solubilities and maximal achievable electron concentrations. In agreement with experiments, we find that Sb substitution is an effective doping strategy, with Se and Te doping predicted to yield up to ~8 × 10 19 cm –3 electrons. However, we also find that Mg substitution with trivalent (or higher) cations can be even more effective; in particular, the predicted highest achievable electron concentration (~5 × 10 20 cm –3 ) with La as an extrinsic dopant exceeds that of Se and Te doping. Interstitial doping (Li, Zn, Cu, Be) is found to be largely ineffective either due to self-compensation (Li) or high formation energy (Zn, Cu, Be). Lastly, our results offer La as an alternative dopant to Te and Se and reinforce the need for careful phase boundary mapping in achieving high electron concentrations in Mg 3 Sb 2 .

36 MATERIALS SCIENCE↗

An octanol hinge opens the door to water transport

Despite their pharmacological relevance, the mechanism of transport across water/octanol phase boundaries has remained unexplored. Octanol molecular assemblies are demonstrated to reversibly bind water and swing like the hinge of a door.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Symmetry mismatch controlled ferroelastic domain ordering and the functional properties of manganite films on cubic miscut substrates

We have studied the magnetotransport properties and strain release mechanisms in ferroelastic La 0.9 Sr 0.1 MnO 3 (LSMO) epitaxial thin films on SrTiO 3 (STO)(001) substrates with different miscut angles. The substrate miscut angle plays a critical role in releasing shear strain and has a huge impact on the properties of the films. The strain relaxes by monoclinic distortion for films on low miscut substrates and for higher miscut substrates, the strain relaxation causes the formation of periodic twin domains with larger periodicities. Furthermore, we observe that the Curie temperature (T C ) decreases systematically, and magnetoresistance (MR) increases with increasing the miscut angle. Such changes in the magnetic and transport properties could be due to the increased density of phase boundaries (PBs) with the increase of miscut angle. This work provides a way to tailor film microstructures and subsequent functional properties of other complex oxide films on miscut substrates with symmetry mismatch.

36 MATERIALS SCIENCE↗

Unexpected inverse correlations and cooperativity in ion-pair phase transfer

Liquid/liquid extraction is one of the most widely used separation and purification methods, where a forefront of research is the study of transport mechanisms for solute partitioning and the relationships that these have to solution structure at the phase boundary. To date, organized surface features that include protrusions, water-fingers, and molecular hinges have been reported. Many of these equilibrium studies have focused upon small-molecule transport – yet the extent to which the complexity of the solute, and the competition between different solutes, influence transport mechanisms have not been explored. Here we report molecular dynamics simulations that demonstrate that a metal salt (LiNO 3 ) can be transported via a protrusion mechanism that is remarkably similar to that reported for H 2 O by tri-butyl phosphate (TBP), a process that involves dimeric assemblies. Yet the LiNO 3 out-competes H 2 O for a bridging position between the extracting TBP dimer, which in-turn changes the preferred transport pathway of H 2 O. Examining the electrolyte concentration dependence on ion-pair transport unexpectedly reveals an inverse correlation with the extracting surfactant concentration. As [LiNO 3 ] increases, surface adsorbed TBP becomes a limiting reactant in correlation with an increased negative surface charge induced by excess interfacial NO 3 – , however the rate of transport is enhanced. Within the highly dynamic interfacial environment, we hypothesize that this unique cooperative effect may be due to perturbed surface organization that either decreases the energy of formation of transporting protrusion motifs or makes it easier for these self-assembled species to disengage from the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect chemistry and doping of BiCuSeO

While p-type BiCuSeO is a well-known mid-temperature oxide thermoelectric (TE) material, computations predict that superior TE performance can be realized through n-type doping. In this study, we use first-principles defect calculations to show that Cu vacancies are responsible for the native p-type self doping; yet, we find that BiCuSeO is n-type dopable under Cu-rich growth conditions, where the formation of Cu vacancies is suppressed. We computationally survey a broad suite of 23 dopants and find that only Cl and Br are effective n-type dopants. Therefore, we recommend that future experimental doping efforts utilize phase boundary mapping to optimize the electron concentration and resolve the anomalous p–n–p transitions observed in halogen-doped BiCuSeO. The prospect of n-type doping, as revealed by our defect calculations, paves the path for rational design of BiCuSeO chemical analogues with similar doping behavior and even better TE performance.

36 MATERIALS SCIENCE↗

Role of spall in microstructure evolution during laser-shock-driven rapid undercooling and resolidification

We previously reported [Colvin et al., J. Appl. Phys. 101, 084906 (2007)] on the microstructure morphology of pure Bi metal subjected to rapid laser-shock-driven melting and subsequent resolidification upon release of pressure, where the estimated effective undercooling rates were of the order of 10{sup 9}-10{sup 10} K/s. More recently, we repeated these experiments, but with a Bi/Zn alloy (Zn atomic fraction of 2%-4%) instead of elemental Bi and with a change in target design to suppress spall in the Bi/Zn samples. We observed a similar microstructure morphology in the two sets of experiments, with initially columnar grains recrystallizing to larger equiaxed grains. The Bi samples, however, exhibited micron-scale dendrites on the spall surfaces, whereas there were no dendritic structures anywhere in the nonspalled Bi/Zn, even down to the nanometer scale as observed by transmission electron microscopy. We present the simulations and the interferometry data that show that the samples in the two sets of experiments followed nearly identical hydrodynamic and thermodynamic paths apart from the presence of (probably partially liquid) spall in pure Bi. Simulations also show that the spall occurs right at the moving phase front and, hence, the spall itself cuts off the principal direction for latent heat dissipation across the phase boundary. We suggest that it is the liquid spall itself that creates the conditions for dendrite formation.

36 MATERIALS SCIENCE↗

Dependence of depolarization temperature on cation vacancies and lattice distortion for lead-free 74(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-20.8(Bi{sub 1/2}K{sub 1/2})TiO{sub 3}-5.2BaTiO{sub 3} ferroelectric ceramics

In this paper, the off-morphotropic-phase-boundary 74(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-20.8(Bi{sub 1/2}K{sub 1/2})TiO{sub 3}-5.2BaTiO{sub 3} ceramics were fabricated at different sintering temperatures. It was found out that as the sintering temperature increases, the volatilization of the A-site elements is aggravated, thus generating the oxygen vacancies; meanwhile, the tetragonality of the perovskite lattice reduces gradually. Besides, the temperature-dependent dielectric responses revealed that as the sintering temperature increases, the depolarization temperature T{sub d} decreases while the Curie-Weiss point T{sub C} increases. It is suggested that the lattice distortion, other than the oxygen vacancies, is the crucial factor in influencing the depolarization temperature.

36 MATERIALS SCIENCE↗

Enhanced piezoelectricity and high temperature poling effect in (1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3} ceramics via an ethylene glycol route

A solution chemical method utilizing ethylene glycol as solvent has been developed to prepare the ceramics of (1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3}[(1-x)PMN-xPT] from a precursor powder that can be pressed and fired in one step to produce high quality ceramics with excellent piezoelectric properties. The ceramics reach a relative density of up to 97% of the theoretical value after direct calcinations. This high density is achieved without the need of additional sintering after calcination which is usually required in conventional solid state syntheses to produce ceramics. The ceramics exhibit a unipolar piezoelectric coefficient d{sub 33} of 848 pC/N, which is one of the highest values for any unmodified/untextured binary systems reported to date. Since the piezoelectric properties depend on composition and electric field, the effect of poling conditions was investigated. A critical temperature limit has been found, above which poling can dramatically impair the piezoelectric properties due to a field-induced increase in the monoclinic phase component around the morphotropic phase boundary.

36 MATERIALS SCIENCE↗

SANS EXAMINATION OF THE Mg{sub 3}CoNi{sub 2} ALLOY FOR HYDROGEN STORAGE MATERIAL

The nanocrystalline Mg{sub 3}CoNi{sub 2} alloys have been synthesized from Mg, Co and Ni pure metal powder by using a SPEX 8000 High Energy Milling through wet method with its vial and ball made of stainless steel. A weight ratio of ball to sample was set at 8:1 and the milling times were set at 20 and 30 h. SANS measurements were performed in an instrument SMARTer at BATAN using a distances between 1.5, 4 and 13 m and a wavelength, {lambda}, of 0.39 nm. The SANS investigation results showed that the intensity profiles decrease with q and a power law exponent of about 4. It is suggested that surface Porod scattering dominates. The relative intensity decreases with increased hydrogen concentration, indicating a decline in surface area. Hydrogenation leads to significant changes in the scattering curves mainly due to the 1 Mg{sub 2}Ni attice expansion and changes of the Mg{sub 2}Ni-H/Mg{sub 2}Ni phase boundaries and that of the Mg{sub 2}Ni or Mg{sub 2}NiH{sub 4} grain boundaries. The samples absorb about 3.3 and 1.9 wt% hydrogen with increasing milling time of 20 and 30 h, respectively.

36 MATERIALS SCIENCE↗

Dielectric Properties Of Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-PbTiO{sub 3} Solid Solution Synthesized By Solid State Reaction Route

Phase pure (1-x)Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-x PbTiO{sub 3} ceramics near morphotrophic phase boundary (x = 0.35) are prepared by conventional solid state reaction route, by adding 2 mol.% MgO. The dielectric properties of lead indium niobate-lead titanate ceramic are studied as a function of both temperature and frequency. For this composition the dielectric constant for 100 Hz increases from 1944 at room temperature to 1510 at Curie temperature(304 deg. C). The saturation polarization, measured at room temperature, is found to be 23.9 {mu}C/cm{sup 2} for 40 kV/cm.

36 MATERIALS SCIENCE↗