Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

In situ formation of tin nanocrystals embedded in silicon nitride matrix

Tin (Sn) nanocrystals (NCs) embedded in a silicon nitride (Si{sub 3}N{sub 4}) matrix have been fabricated in a cosputtering process employing low temperature (100 deg. C) substrate heating. Transmission electron microscopy (TEM) showed the formation of uniformly sized Sn NCs of 5.2+-0.9 nm evenly distributed in the Si{sub 3}N{sub 4} matrix. Both TEM and x-ray diffraction measurements showed that the Sn NCs adopted the semimetallic tetragonal beta-Sn structure rather than the cubic semiconducting alpha-Sn structure. X-ray photoelectron spectroscopy revealed that the semimetallic state (Sn{sup 0}) is the major component of Sn in the sample films. Our investigation demonstrates a pronounced effect of the substrate temperature on the formation of Sn NCs. The mechanism of in situ formation of Sn NCs is discussed. We suggest that the formation of uniformly sized Sn NCs is correlated with lowering the surface mobility of the nuclei due to the presence of the cosputtered Si{sub 3}N{sub 4}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

On the delamination dynamic of sputtered amorphous carbon nitride films

We present in this study a spectroscopic investigation of spontaneous delamination of amorphous carbon nitride (a-CN{sub x}) films deposited on silicon substrates (Si) by rf magnetron sputtering of a graphite target in pure Ar/N{sub 2} gas mixture. The microstructural properties of the films were determined in their as-deposited state using infrared absorption and Raman spectroscopy experiments. Various shapes of debonding patterns have been observed. Based on the present experimental evidence, a description of nitrogen incorporation and the resulting hybridization states of the CN bonds in the a-CN{sub x} films prior and after delamination are proposed to elucidate the microstructural origin of this delamination occurring along the a-CN{sub x}/Si interface and the physicochemical mechanism that governed its dynamic.

36 MATERIALS SCIENCE↗

Theoretical investigation of the divacancies in boron nitride nanotubes: Properties and surface reactivity toward various adsorbates

The recent study has shown that the point defects formed under electron irradiation in the boron nitride nanotubes (BNNTs) are primarily BN divacancies. In the present work, we explore the properties of BNNTs with divacancies and estimate their surface reactivity toward various adsorbates through density functional theory calculations. Divacancies in BNNTs can self-heal by spontaneously reconstructing stable structures that have two pentagons side by side with an octagon (585). The formation energies, which strongly depend on the divacancy orientation with respect to the tube axis, increase with increasing tube diameters. Compared to the reactivity of the perfect BNNT, those sites near the divacancies have a higher reactivity due to the formation of frustrated B-B and N-N bonds and the local strain induced by pentagonal and octagonal rings. The present results might be useful for deeply understanding the nature of defects in BNNTs and rendering BNNTs promising for many applications, especially in nanoelectronics.

36 MATERIALS SCIENCE↗

Cancer cells (MCF-7, Colo-357, and LNCaP) viability on amorphous hydrogenated carbon nitride film deposited by dielectric barrier discharge plasma

Atmospheric pressure dielectric barrier discharge plasma in CH{sub 4}/N{sub 2} (1:1) gas mixture has been employed to deposit amorphous hydrogenated carbon nitride (aH-CN{sub x}) film. In vitro studies with three different cancer cell lines were carried out on the coated surfaces. Preliminary biocompatibility and effect of CH{sub 4}/N{sub 2} films have been investigated by measuring cell proliferation. Three different cancer cell (MCF-7, Colo-357, and LNCaP) suspensions have been exposed on the surface of aH-CN{sub x} film to investigate the effect of deposited films on viability of cells. Results from the MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2- (4-sulfophenyl)-2H- tetrazolium, inner salt) proliferation assays indicated that the deposited aH-CN{sub x} film is cytotoxic to cancer cell lines. Time course cell viability assay indicated maximum cell death at 24 h after seeding the cells. This effect is dependant on physicochemical and mechanical properties of the deposited films. The deposited film has been characterized by x-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The results confirm the presence of C-N, Cident toN, C-H{sub x}, C-O, N-O, overlapping NH, and OH bonds in the film.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effect of cubic phase evolution on field emission properties of boron nitride island films

Field emission performance of boron nitride (BN) island films is studied in terms of cubic phase evolution in plasma-enhanced chemical vapor deposition. Fine-grained island films with large surface roughness can be grown for initial sp{sup 2}-bonded BN and subsequent cubic BN (cBN) phases by using low-energy (approx20 eV) ion bombardment. Ultraviolet photoelectron spectroscopy reveals that the electron affinity is as low as 0.3 eV for both sp{sup 2}-bonded BN and cBN phases. The evolution of cBN islands reduces the turn-on field down to around 9 V/mum and increases the current density up to 10{sup -4} A/cm{sup 2}. The emission is facilitated by the larger field enhancement due to the larger roughness and the higher conduction of cBN islands. The potential barrier height is estimated to be about 3.4 eV for emission from the Fermi level, while it is only about 0.3 eV for 'conduction band emission'.

36 MATERIALS SCIENCE↗

Tunable electrical and optical properties of hafnium nitride thin films

We report structural and electronic properties of epitaxial hafnium nitride films grown on MgO by plasma-assisted pulsed laser deposition. The electronic structure measured using soft x-ray absorption and emission spectroscopy is in excellent agreement with the results of a band structure calculation. We show that by varying the growth conditions we can extend the films' reflectance further toward the UV, and we relate this observation to the electronic structure.

36 MATERIALS SCIENCE↗

ALUMINUM NITRIDE AS A HIGH TEMPERATURE TRANSDUCER

The high temperature capabilities of bulk single crystal aluminum nitride are investigated experimentally. Temperatures in excess of 1100 deg. Celsius are obtained and held for eight hours. Variation in the performance of single crystal samples is demonstrated.

36 MATERIALS SCIENCE↗

Effect of total pressure on the formation and size evolution of silicon quantum dots in silicon nitride films

The size of silicon quantum dots (Si QDs) embedded in silicon nitride (SiN{sub x}) has been controlled by varying the total pressure in the plasma-enhanced chemical vapor deposition (PECVD) reactor. This is evidenced by transmission electron microscopy and results in a shift in the light emission peak of the quantum dots. We show that the luminescence in our structures is attributed to the quantum confinement effect. These findings give a strong indication that the quality (density and size distribution) of Si QDs can be improved by optimizing the deposition parameters which opens a route to the fabrication of an all-Si tandem solar cell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Radiation-induced metastable ordered phase in gallium nitride

Energetic particle irradiation is one of the useful ways for realizing metastable phases far from the equilibrium state. In the present study, we performed electron-beam-irradiation into gallium nitride (GaN) with a wurtzite structure and examined its structural changes using transmission electron microscopy. It was found that superlattice Bragg reflections appear in the electron diffraction patterns of the irradiated GaN. This suggests that the wurtzite GaN transforms to another crystalline structure with atomic ordering.

36 MATERIALS SCIENCE↗

Influence of disorder on localization and density of states in amorphous carbon nitride thin films systems rich in {pi}-bonded carbon atoms

We discuss in this paper the evolution of both the density of states (DOS) located between the band-tail states and the DOS around the Fermi level N(E{sub F}) in amorphous carbon nitride films (a-CN{sub x}) as a function of the total nitrogen partial pressure ratio in the Ar/N{sub 2} plasma mixture. The films were deposited by three different deposition techniques and their microstructure was characterized using a combination of infrared and Raman spectroscopy and optical transmission experiments, completed with electrical conductivity measurements, as a function of temperature. The observed changes in the optoelectronic properties are attributed to the modification in the atomic bonding structures, which were induced by N incorporation, accompanied by an increase in the sp{sup 2} carbon bonding configurations and their relative disorder. The electrical conductivity variation was interpreted in terms of local effects on the nature and energy distribution of {pi} and {pi}* states.

36 MATERIALS SCIENCE↗

Pressure dependent lattice specific heat and mode Grueneisen parameters for group III nitrides

The pressure dependent lattice specific heat and mode Grueneisen parameters for III-V nitrides have been calculated using a lattice dynamical model namely the rigid ion model which consists of a usual long range and short range potential. The Murnaghan's equation of state is adopted for relating the volume dependence with pressure. The non linear least square fitting procedures to obtain the model parameters have been used. The results obtained using the present model calculation on mode Grueneisen parameters and specific are compared with existing experimental data and found in good agreement. There is a increase in in specific heat with pressure. The mode Grueneisen parameters show that the TA phonon mode is responsible for phase transition.

36 MATERIALS SCIENCE↗

Preparation of superhydrophobic nanodiamond and cubic boron nitride films

Superhydrophobic surfaces were achieved on the hardest and the second hardest materials, diamond and cubic boron nitride (cBN) films. Various surface nanostructures of nanocrystalline diamond (ND) and cBN films were constructed by carrying out bias-assisted reactive ion etching in hydrogen/argon plasmas; and it is shown that surface nanostructuring may enhance dramatically the hydrophobicity of ND and cBN films. Together with surface fluorination, superhydrophobic ND and cBN surfaces with a contact angle greater than 150 deg. and a sliding angle smaller than 10 deg. were demonstrated. The origin of hydrophobicity enhancement is discussed based on the Cassie model.

36 MATERIALS SCIENCE↗

High mobility two-dimensional electron gases in nitride heterostructures with high Al composition AlGaN alloy barriers

We report high-electron mobility nitride heterostructures with >70% Al composition AlGaN alloy barriers grown by molecular beam epitaxy. Direct growth of such AlGaN layers on GaN resulted in hexagonal trenches and a low mobility polarization-induced charge. By applying growth interruption at the heterojunction, the surface morphology improved dramatically and the room temperature two-dimensional electron gas (2DEG) mobility increased by an order of magnitude, exceeding 1300 cm{sup 2}/V s. The 2DEG density was tunable at 0.4-3.7x10{sup 13}/cm{sup 2} by varying the total barrier thickness (t). Surface barrier heights of the heterostructures were extracted and exhibited dependence on t.

36 MATERIALS SCIENCE↗

Electrical transport properties of the Si-doped cubic boron nitride thin films prepared by in situ cosputtering

Si-doped cubic boron nitride (c-BN) films with various Si concentrations were achieved by in situ cosputtering during ion beam assisted deposition. Effects of the Si concentration and rapid thermal annealing (RTA) conditions on the electrical transport properties of Si-doped c-BN thin films were investigated systematically. The results suggest that the optimum RTA condition is at the temperature of 1000 deg. C for 3 min. The resistance of Si-doped c-BN films gradually decreases as the Si concentration increases, indicating an electrical doping effect of the Si impurity. The temperature dependent electrical conductivity of the Si-doped c-BN films suggests that different conduction mechanisms are dominant over the different temperature ranges. Based on the Davis-Mott model, we propose that the extended-state conduction, band tail-state conduction and short-range hopping conduction are responsible for the respective temperature ranges. In addition, the reduction in activation energy of Si impurities is observed as the Si concentration increases.

36 MATERIALS SCIENCE↗

Studies of Valence Band Alignment Between Nitrided GaPN/GaP (111) Interface Using X-ray Photoelectron Spectroscopy

The analysis of core levels positions of Ga{sub 3}d, N{sub 1s} and P{sub 2}p at different etching depth from the plasma nitrided GaP (111) surface shows that the nitrogen ions interact with both Gallium and Phosphorous ions with nearly equal probability. The analysis of valence band spectra shows the type-II band alignment between GaPN{sub 0.22}/GaP and the valence band offset is {approx}2.2{+-}0.1 eV.

36 MATERIALS SCIENCE↗

Precursors for Carbon Nitride Synthesis

Nano structured carbon nitride films were prepared by pyrolysis assisted chemical vapour deposition. Pyrrole (C{sub 4}H{sub 5}N), Pyrrolidine (C{sub 4}H{sub 9}N), Azabenzimidazole (C{sub 6}H{sub 5}N{sub 3}) and Triazine (C{sub 6}H{sub 15}N{sub 3}) were used as precursors. The vibrational modes observed for C-N and C = N from FTIR spectra confirms the bonding of nitrogen with carbon. XPS core level spectra of C 1s and N 1s also show the formation of bonding between carbon and nitrogen atoms. The nitrogen content in the prepared samples was found to be around 25 atomic %.

36 MATERIALS SCIENCE↗

Magnetic Field Modulated Photoreflectance Study of the Electron Effective Mass in Dilute Nitride Semiconductors

Magnetic field modulated photoreflectance measurements are performed on the dilute nitride semiconductor Ga(AsN) in quantizing magnetic fields. From the measured cyclotron energies, the conduction band effective mass and its dependence on the nitrogen content are determined. The effective mass is found to become significantly heavier in samples with high nitrogen composition (>0.1%).

36 MATERIALS SCIENCE↗