Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Morphological Study of Insoluble Organic Matter Residues from Primitive

Insoluble organic matter (IOM) constitutes a major proportion, 70-99%, of the total organic carbon found in primitive chondrites [1, 2]. One characteristic morphological component of IOM is nanoglobules [3, 4]. Some nanoglobules exhibit large N-15 and D enrichments relative to solar values, indicating that they likely originated in the ISM or the outskirts of the protoplanetary disk [3]. A recent study of samples from the Tagish Lake meteorite with varying levels of hydrothermal alteration suggest that nanoglobule abundance decreases with increasing hydrothermal alteration [5]. The aim of this study is to further document the morphologies of IOM from a range of primitive chondrites in order to determine any correlation of morphology with petrographic grade and chondrite class that could constrain the formation and/or alteration mechanisms.

Changela, H. G.↗

On the Non-Monotonic Variation of the Opposition Surge Morphology with Albedo Exhibited by Satellites' Surface

We used well know phase functions of satellites and rings around the giant planets of our Solar System to study the morphology of the opposition effect (at phase angles alpha < 20 degrees. To avoid the effect of the variable finite size of the Sun, we use a deconvolution morphological model to retrieve the morphological parameters of the surge (A and HWHM). These parameters are found to have a non-monotonic variation with the single scattering albedo, similar to that observed in asteroids, which is unexplained so far. The non-monotonic variation is discussed in the framework of the coherent backscattering and shadow hiding mechanisms.

solar system↗

Correlations Among Microstructure, Morphology, Chemistry, and Isotopic Systematics of Hibonite in CM Chondrites

Introduction: Hibonite is a primary refractory phase occurring in many CAIs, typically with spinel and perovskite. Our microstructural studies of CAIs from carbonaceous chondrites reveal a range of stacking defect densities and correlated non-stoichiometry in hibonite. We also conducted a series of annealing experiments, demonstrating that the Mg-Al substitution stabilized the formation of defect-structured hibonite. Here, we continue a detailed TEM analysis of hibonite-bearing inclusions from CM chondrites that have been well-characterized isotopically. We examine possible correlations of microstructure, morphology, mineralogy, and chemical and isotopic systematics of CM hibonites in order to better understand the formation history of hibonite in the early solar nebula. Methods: Fifteen hibonite-bearing inclusions from the Paris CM chondrite were analyzed using a JEOL 7600F SEM and a JEOL 8530F electron microprobe. In addition to three hibonite-bearing inclusions from the Murchison CM chondrite previously reported, we selected three inclusions from Paris, Pmt1-6, 1-9, and 1-10, representing a range of 26Al/27Al ratios and minor element concentrations for a detailed TEM study. We extracted TEM sections from hibonite grains using a FEI Quanta 3D field emission gun SEM/FIB. The sections were then examined using a JEOL 2500SE field-emission scanning TEM equipped with a Thermo-Noran thin window EDX spectrometer. Results and Discussion: A total of six hibonite-bearing inclusions, including two platy hibonite crystals (PLACs) and four spinel-hibonite inclusions (SHIBs), were studied. There are notable differences in chemical and isotopic compositions between the inclusions (Table 1), indicative of their different formation environment or timing. Our TEM observations show perfectly-ordered, stoichiometric hibonite crystals without stacking defects in two PLACs, 2-7-1 and 2-8-2, and in three SHIBs, Pmt1-6, 1-9, and 1-10. In contrast, SHIB 1-9-5 hibonite grains contain a low density of stacking defects linked to an increase in MgO contents, indicating complex, disordered intergrowths of stoichiometric and MgO-enriched hibonites. From the data collected to date, we find no clear correlation between the microstructures of hibonite and its morphological and mineralogical types that reflect distinct chemical and isotopic systematics [6-8,10]. Interestingly, the presence of no or few stacking defects in hibonite from the PLACs and SHIBs are in contrast to our experimental studies that produced very high densities of stacking defects in hibonite [3-5]. Unlike our experi-ments, electron microprobe data from the PLACs and SHIBs hibonite grains show a strong correlation between (Ti4++Si4+) and Mg2+ cations, suggesting that coupled substitutions of (Ti4++Mg2+) and (Si4++Mg2+) for 2Al3+ inhibit the formation of defect-structured hibonite. However, our experimental studies suggest that kinetics (e.g., cooling rate) or other thermal effects also exert a strong control on the microstructures and chemical compositions of hibonite. In Pmt1-6, elongated perovskite grains present at the hibonite grain boundaries display (121) twinning, indicative of a fast cooling (>50degC/min) after high-temperature events. Therefore, the nebular microstructural characteristics of hibonite, at least in this inclusion, would not have destroyed by subsequent high-temperature annealing. Conclusions: Our TEM observations thus far show no clear correlation in microstructures, morphological and mineralogical characteristics, and chemical and isotopic systematics of hibonites from CM chondrites. The observed variation in stacking defect densities in the hibonites may be controlled by thermal processes in the early solar nebula. A detailed TEM analysis of additional CM hibonite samples is underway to evaluate this hypothesis.

Han, J.↗

Detailed Nb Surface Morphology Evolution During Electropolishing for SRF Cavity Production

Electropolishing of niobium is currently an important part of attaining the best performance of SRF cavities. We endeavor to develop sufficient understanding of the process dynamics to gain predictive power over specific topographies subjected to controlled electropolishing conditions. This work examines the evolution of highly reproducible Nb surface morphology produced by centrifugal barrel polishing (CBP) of fine-grain and single-crystal material as this material is electropolished under different well-controlled conditions. The morphology evolution of Nb surface has been described using a combined approach of scaling analysis and predictions of the electropolishing theory. Our results shows that electropolishing at low temperature (<25 C) helps to smooth out the surface feature scales within the diffusion layer (<20 µm) and to reduce the kinetics-controlled surface etching. A preliminary computational model has been developed that simulates the evolution of specific topography of a niobium surface under parametrized conditions. This work is expected to lead to the direct linking of starting surface morphology specification, specific processing protocol, and consistently attained finished surface condition.

Tian, H.↗

Effect of Barium on Morphological Transition and Magnetic and Dielectric Properties in Ferrite Nanoparticles

Barium ferrite (BaFe{sub 2}O{sub 4}) nanoparticles were synthesized by auto combustion method under different weight percentages of barium. The role of barium in the behavior of spinel ferrite property is identified from this study. XRD exhibits prominent orientation of (212) for BaFe{sub 2}O{sub 4} has confirmed especially in 20 and 30 wt% of barium. The addition of barium metal induced the specific vibration in FTIR spectra and such changes coincide well with the particle size. Further, the EDX spectrum reflects the atomic percentage of elemental presence in the samples of barium ferrite. Addition of barium on ferrite nanoparticles reduces the intensity of fluorescence. The morphological changes occurred due to increasing doping concentration of barium and is visualized from the FESEM and TEM images. The formation of different morphologies such as spherical, hexagonal platelets and small rectangular bar shape are observed only due to inclusion of barium at surfactant medium. The magnetic properties of the barium ferrite samples are studied by VSM. It reveals that 35.11 emu/g saturation magnetization (M{sub s}) with 3775.08 Oe coercivity. The change in values of coercivity (H{sub c}) from 3775.08 to 1572.95 Oe due to the variation of barium levels confirmed that the role of barium induced the hard magnetic behavior. The dielectric study also indicates the significance of barium ferrite in the variation of dielectric constant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Additive-Induced Morphology Change of Polymer Film Enables Enhanced Charge Mobility and Faster Organic Electrochemical Transistor Switching

Conjugated polymers (CPs) play an important role in organic electrochemical transistors (OECTs) for bioelectronics and related applications, where they serve as channel materials. Currently, most successful polymers for CPs are re-engineered from traditional CPs by replacing hydrophobic alkyl side chains with hydrophilic ethylene glycol or ionic groups. Frustratingly, the enhanced ion transport often compromises the charge mobility of the original CP. In this work, we present an additive-mediated method to construct a modified poly(3-hexylthiophene) (P3HT) film to enable efficient ion migration. The additive is designed with a cleavable diazo group that releases nitrogen and 2-methoxyethanol, a volatile compound, to alter the P3HT film morphology. OECTs based on the film exhibit improved response times. Interestingly, the process also enhances the crystallinity of P3HT, leading to higher hole mobility compared with pristine P3HT. This study proposes an in situ strategy to achieve the functionality of the OMIEC via morphological regulation, offering a promising route to simultaneously enhance both ion accessibility and charge mobility.

Organic polymers↗

EFFECTS OF VEGETATION ON TURBULENCE, SEDIMENT TRANSPORT AND STREAM MORPHOLOGY

Vegetation, from an individual stem to multiple stems in various configurations, profoundly alters turbulent flows. These alterations influence sediment transport and stream morphology, but depend on complex interactions and relationships between flow, plants and sediment properties. This is illustrated for three case studies that represent a variety of macrophyte patterns and scales in the environment: flows through simulated uniformly distributed plant stems, emergent and submerged; flows with alternating simulated stem patches; and flow around an isolated stem in a flood plain. The emergent case demonstrates that when density is sparse the mean velocity and turbulence intensities vary horizontally around the stems, which would promote a heterogeneous bedform morphology. However, it is still unclear how density, submergence ratio, and flow Reynolds number, in combination, influence interference effects, vortex shedding and dissipation, and velocity, pressure and lift fluctuations that affect sediment entrainment. The submerged case demonstrates significant reduction of the mean velocity, turbulence intensities, and turbulent shear near the bed compared to an unobstructed flow and supports numerous observations that vegetation promotes deposition or stabilizes bed sediments. The case of alternating emergent vegetation patches illustrates how vegetation adjusts the bed promoting scour in open water and deposition within the patches. The isolated stem case illustrates the variety of coherent structures generated, their complex interaction, and their role in specific sediment transport phenomena observed. Additional research is required, however, to quantify thresholds and relationships for flow-vegetation-sediment interactions so that aquatic macrophyte plantings can be used more effectively in water resource management.

42 ENGINEERING↗

Thermally induced nanoscale structural and morphological changes for atomic-layer-deposited Pt on SrTiO{sub 3}(001).

Platinum grown by atomic layer deposition (ALD) on SrTiO{sub 3}(001) surfaces was studied as a function of Pt coverage and post-deposition thermal treatment. The combination of atomic-force microscopy, scanning electron microscopy, x-ray fluorescence, x-ray reflectivity, and grazing-incidence small-angle x-ray scattering reveals significant changes in the nanoscale surface morphology and crystallinity for the differently prepared films. Surfaces with Pt coverages from 1 to 40 monolayers (ML) show different initial morphologies that evolve into different final Pt microstructures after annealing to 800 C. These distinct nanoscale structural changes are explained by surface diffusion and the surface and interface energies for noble metals on oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Morphological changes of Ganoderma boninense mycelia after challenged by Trichoderma and Bacillus

Ganoderma boninense is a fungal pathogen that causes Basal Stem Rot (BSR) disease in oil palm. This deadly disease has caused major losses in the oil palm industry and no remedy is reported to date. The more promising control on G. boninense is the use of biological control agents (BCAs). Despite many attempts in using BCAs as a control agent but evidence on the colonization of BCAs and morphological changes of the pathogen is not well documented. We have investigated the effect of antagonist activity on the combination of Trichoderma spp. and Bacillus spp. on the morphology of G. boninense. The antagonist activity was evaluated using agar well diffusion assay. BCAs suppressed the mycelia growth of G. boninense up to 70%. Observation under Scanning Electron Microscopy (SEM) shows these BCAs induced stripping of G. boninense hyphal structure by destroying the cellular structure. Highly disrupted, disaggerated, shrivelled and lysis of G. boninense hyphal were also observed. The antifungal activity of Trichoderma spp. and Bacillus spp. observed could be associated with the production of Cell Wall Degrading Enzymes (CWDE)

60 APPLIED LIFE SCIENCES↗

Process induced morphology of irradiated HD-PE

The preparation of cross-linked polyethylene with high energy electrons is a well-known and used method to change material properties [1-6]. A new developed technique called “Electron induced reactive processing” simultaneously combines polymer modification with high energy electrons and melt mixing processes [7-13]. In the case of polyethylene, this novel technique leads to exceptional mechanical properties. Definitely, these properties depend on the molecular architecture as well as the morphological characteristics of polyethylene after the electron treatment. In this work we concentrate on the morphological changes of high density polyethylene generated by using state of the art high energy electron treatment in the solid state compared with high density polyethylene modified with the electron induced reactive processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A morphological study of the changes in the ultrastructure of a bacterial biofilm disrupted by an ac corona discharge in air

The morphology of bacterial cells and biofilms subjected to a low frequency (∼10{sup 5} Hz) ac (∼10{sup −1} A) corona discharge was investigated using electron microscopy. A low-frequency ac corona discharge in air is shown to have a bactericidal and bacteriostatic effect on Escherichia coli M17 culture at both the cellular and population levels. Corona exposure inhibits the formation of a microbial community and results in the destruction of formed biofilms. This paper presents data on changes in the ultrastructure of cells and biofilms after corona treatment. Our results suggest that the E. coli M17 cells inside biofilms are affected with results similar to sub-lethal and lethal thermal exposure. Some of the biological aspects of colony and biofilm cells death are evaluated. Morphological changes in the ultrastructure of the biofilms under corona treatment are described. Our results indicate that the heating effect is the main factor responsible for the corona-induced inactivation of bacteria.

36 MATERIALS SCIENCE↗

EVOLUTION OF THE RADIO REMNANT OF SUPERNOVA 1987A: MORPHOLOGICAL CHANGES FROM DAY 7000

We present radio imaging observations of supernova remnant 1987A at 9 GHz, taken with the Australia Telescope Compact Array over 21 years from 1992 to 2013. By employing a Fourier modeling technique to fit the visibility data, we show that the remnant structure has evolved significantly since day 7000 (mid-2006): the emission latitude has gradually decreased such that the overall geometry has become more similar to a ring structure. Around the same time, we find a decreasing trend in the east-west asymmetry of the surface emissivity. These results could reflect the increasing interaction of the forward shock with material around the circumstellar ring, and the relative weakening of the interaction with the lower-density material at higher latitudes. The morphological evolution caused an apparent break in the remnant expansion measured with a torus model, from a velocity of 4600{sup +150}{sub -}200 km s{sup –1} between day 4000 and 7000 to 2400{sup +100}{sub -200} km s{sup –1} after day 7000. However, we emphasize that there is no conclusive evidence for a physical slowing of the shock at any given latitude in the expanding remnant, and that a change of radio morphology alone appears to dominate the evolution. This is supported by our ring-only fits which show a constant expansion of 3890 ± 50 km s{sup –1} without deceleration between days 4000 and 9000. We suggest that once the emission latitude no longer decreases, the expansion velocity obtained from the torus model should return to the same value as that measured with the ring model.

79 ASTRONOMY AND ASTROPHYSICS↗

Morphological Analysis of Zirconium Nuclear Fuel Retaining Rods Braided with SiC: Quality Assurance and Defect Identification

In the after-Fukushima world, the stability of materials under extreme conditions is an important issue for the safety of nuclear reactors. Among the methods explored currently to improve zircaloys’ thermal stability in off-normal conditions, using a protective coat of the SiC filaments is considered because silicon carbide is well known for its remarkable chemical inertness at high temperatures. A typical SiC fiber contains ~50,000 individual filaments of 5 – 10 µm in diameter. In this paper, an effort was made to develop and apply mathematical morphology to the process of automatic defect identification in Zircaloy-4 rods braided with the protective layer of the silicon carbide filament. However, the issues of the braiding quality have to be addressed to ensure its full protective potential. We present the original mathematical morphology algorithms that allow solving this problem of quality assurance successfully. In nuclear industry, such algorithms are used for the first time, and could be easily generalized to the case of automated continuous monitoring for defect identification in the future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Decoupling Complex Multi–Length–Scale Morphology in Non–Fullerene Photovoltaics with Nitrogen K–Edge Resonant Soft X–ray Scattering

Complex morphology in organic photovoltaics (OPVs) and other functional soft materials commonly dictates performance. Such complexity in OPVs originates from the mesoscale kinetically trapped non-equilibrium state, which governs device charge generation and transport. Resonant soft X-ray scattering (RSoXS) has been revolutionary in the exploration of OPV morphology in the past decade due to its chemical and orientation sensitivity. However, for non-fullerene OPVs, RSoXS analysis near the carbon K-edge is challenging, due to the chemical similarity of the materials used in active layers. Here, an innovative approach is provided by nitrogen K-edge RSoXS (NK-RSoXS), utilizing the spatial and orientational contrasts from the cyano groups in the acceptor materials, which allows for determination of phase separation. NK-RSoXS clearly visualizes the combined feature sizes in PM6:Y6 blends from crystallization and liquid-liquid demixing, while PM6:Y6:Y6-BO ternary blends with reduced phase-separation size and enhanced material crystallization can lead to current amplification in devices. Nitrogen is common in organic semiconductors and other soft materials, and the strong and directional N 1s → π* resonances make NK-RSoXS a powerful tool to uncover the mesoscale complexity and open opportunities to understand heterogeneous systems.

36 MATERIALS SCIENCE↗

Robustness of Optical Response for Self-Assembled Plasmonic Metamaterials with Morphological Disorder and Surface Roughness

Bottom-up fabrication of metallized biotemplated nanostructures to form specific plasmonic nanoresonators holds promise as a means of achieving large-scale optical metamaterials. However, in contrast to top-down methods, the stochastic growth of self-assembled nanoresonators is prone to significant disorder and surface roughness, which naturally raise an important question about the robustness of their resonant properties in terms of structural imperfections. An aggregated-random-sphere model is developed to mimic the nucleated growth of metallized DNA origami assembly, leading to meta-atoms with realistic, experimentally observed morphological disorder and surface roughness. Using the well-known split-ring-resonator (SRR) motif as an example, the resonant properties of meta-atoms under different levels of roughness are investigated and a strong tolerance of optical response against morphological disorder is revealed. It is found that in SRRs, even with dramatic roughness introduced, the expected resonances are still observed, despite broadening line shapes compared to ideal smooth structure. Only for extreme disorder, which causes drastic segmentation of SRRs, does the resonant response disappear. Finally, the demonstrations are very encouraging for the prospects of bottom-up fabrication toward versatile functional metamaterials and metadevices.

36 MATERIALS SCIENCE↗

Correlating Electronic Structure and Device Physics with Mixing Region Morphology in High-Efficiency Organic Solar Cells

The donor/acceptor interaction in non-fullerene organic photovoltaics leads to the mixing domain that dictates the morphology and electronic structure of the blended thin film. Initiative effort is paid to understand how these domain properties affect the device performances on high-efficiency PM6:Y6 blends. Different fullerenes acceptors are used to manipulate the feature of mixing domain. It is seen that a tight packing in the mixing region is critical, which could effectively enhance the hole transfer and lead to the enlarged and narrow electron density of state (DOS). As a result, short-circuit current (J SC ) and fill factor (FF) are improved. The distribution of DOS and energy levels strongly influences open-circuit voltage (V OC ). The raised filling state of electron Fermi level is seen to be key in determining device V OC . Energy disorder is found to be a key factor to energy loss, which is highly correlated with the intermolecular distance in the mixing region. A 17.53% efficiency is obtained for optimized ternary devices, which is the highest value for similar systems. The current results indicate that a delicate optimization of the mixing domain property is an effective route to improve the V OC , J SC , and FF simultaneously, which provides new guidelines for morphology control toward high-performance organic solar cells.

36 MATERIALS SCIENCE↗

The Impact of Local Morphology on Organic Donor/Acceptor Charge Transfer States

A major breakthrough in the field of organic photovoltaics (OPVs) was the development of the donor/acceptor heterojunction that aids in separating Coulombically bound excitons that are generated upon photoabsorption. Additionally, bound charge transfer (CT) states that result from the exchange of charge carriers across the donor/acceptor interface are believed to play an important role in charge generation. Though organic thin films are often disordered, enhancements to the local structural order at the donor/acceptor interface have recently been shown to greatly influence CT state energetics and the charge generation process. In this progress report, recent efforts to understand the role that donor/acceptor morphology plays in the behavior of CT states and the resulting implications on OPV function are presented. Furthermore, it is aimed to provide a survey of different experimental approaches and to present a balanced examination of current interpretations of key results, and to offer best practices for the fabrication and study of morphologically tunable donor/acceptor CT states.

14 SOLAR ENERGY↗

Temperature-Dependent Morphology, Magnetic and Optical Properties of Li-Doped MgO

Li-doped MgO is a potential catalyst for the oxidative coupling of methane, whereby surface Li+ O centers are suggested to be the chemically active species. To elucidate the role of Li in the MgO matrix, two model systems are prepared and their morphological, optical and magnetic properties as a function of Li doping are investigated. The first is an MgO film deposited on Mo(001) and doped with various amounts of Li, whereas the second is a powder sample fabricated by calcination of Li and Mg precursors in an oxygen atmosphere. Scanning tunneling and transmission electron microscopy are performed to characterize the morphology of both samples. At temperatures above 700 K, Li starts segregating towards the surface and forms irregular Li-rich oxide patches. Above 1050 K, Li desorbs from the MgO surface, leaving behind a characteristic defect pattern. Traces of Li also dissolve into the MgO, as concluded from a distinct optical signature that is absent in the pristine oxide. No electron paramagnetic resonance signal that would be compatible with Li+O centers is detected in the two Li/ MgO samples. Density-functional theory calculations are used to determine the thermodynamic stability of various Li-induced defects in the MgO. The calculations clarify the driving forces for Li segregation towards the MgO surface, but also rationalize the absence of Li+O centers. From the combination of experimental and theoretical results, a detailed picture arises on the role of Li for the MgO properties, which can be used as a starting point to analyze the chemical behavior of the doped oxide in future.

03 NATURAL GAS↗