Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “krypton”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Two-Photon Excitation and Relaxation of the 3d-4d Resonance in Atomic Kr

Two-photon excitation of a single-photon forbidden Auger resonance has been observed and investigated using the intense extreme ultraviolet radiation from the free electron laser in Hamburg. At the wavelength 26.9 nm (46 eV) two photons promoted a 3d core electron to the outer 4d shell. The subsequent Auger decay, as well as several nonlinear above threshold ionization processes, were studied by electron spectroscopy. The experimental data are in excellent agreement with theoretical predictions and analysis of the underlying multiphoton processes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Prominent Higher-Order Contributions to Electronic Recombination

Intershell higher-order (HO) electronic recombination is reported for highly charged Ar, Fe, and Kr ions, where simultaneous excitation of one K-shell electron and one or two additional L-shell electrons occurs upon resonant capture of a free electron. For the mid-Z region, HO resonance strengths grow unexpectedly strong with decreasing atomic number Z ({proportional_to}Z{sup -4}), such that, for Ar ions the 2nd-order overwhelms the 1st-order resonant recombination considerably. The experimental findings are confirmed by multiconfiguration Dirac-Fock calculations including hitherto neglected excitation pathways.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of fission gas release kinetics by on-line mass spectrometry

The release of fission gas (Xe and Kr) and helium out of nuclear fuel materials in normal operation of a nuclear power reactor can constitute a strong limitation of the fuel lifetime. Moreover, radioactive isotopes of Xe and Kr contribute significantly to the global radiological source term released in the primary coolant circuit in case of accidental situations accompanied by fuel rod loss of integrity. As a consequence, fission gas release investigation is of prime importance for the nuclear fuel cycle economy, and is the driven force of numerous R and D programs. In this domain, for solving current fuel behavior understanding issues, preparing the development of new fuels (e.g. for Gen IV power systems) and for improving the modeling prediction capability, there is a marked need for innovations in the instrumentation field, mainly for: . Quantification of very low fission gas concentrations, released from fuel sample and routed in sweeping lines. Monitoring of quick gas release variations by quantification of elementary release during a short period of time. Detection of a large range of atomic masses (e.g. H{sub 2}, HT, He, CO, CO{sub 2}, Ne, Ar, Kr, Xe), together with a performing separation of isotopes for Xe and Kr elements. Coupling measurement of stable and radioactive gas isotopes, by using in parallel mass spectrometry and gamma spectrometry techniques. To fulfill these challenging needs, a common strategy for analysis equipment implementation has been set up thanks to a recently launched collaboration between the CEA and the Univ. of Provence, with the technological support of the Liverpool Univ.. It aims at developing a chronological series of mass spectrometer devices based upon mass filter and 2D/3D ion traps with Fourier transform operating mode and having increasing levels of performances to match the previous challenges for out-of pile and in-pile experiments. The final objective is to install a high performance online mass spectrometer coupled to a gamma spectrometer in the fission product laboratory of the future Jules Horowitz Material Test Reactor. An intermediate step will consist of testing first equipment on an existing experimental facility in the LECA-STAR Hot Cell Laboratory of the CEA Cadarache. This paper presents the scientific and operational stakes linked to fission gas issues, resumes the current state of art for analyzing them in nuclear facilities, then presents the skills gathered through this collaboration to overcome technological bottlenecks. Finally it describes the implementation strategy in nuclear research facilities of the CEA Cadarache. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Spatial distribution of electrical properties for Al-doped ZnO films deposited by dc magnetron sputtering using various inert gases

Spatial distribution of electrical properties of Al-doped ZnO (AZO) films deposited by magnetron sputtering was investigated. To adjust the intensity of bombardment by high-energy particles, the AZO films were deposited using Ar, Kr, or Xe gas with varying plasma impedance. The spatial distribution of the electrical properties clearly depends on the sputtering gas. In the case of using Kr or Xe, the resistivity of the films in front of the target center and erosion areas was significantly enhanced, in contrast with Ar. This was attributed to an enhancement in bombardment damage due to the increased sputtering voltages required for Kr or Xe discharges. The increase in plasma impedance was due to the smaller coefficients for secondary-electron emission of the target surface by Kr or Xe impingements, which leads to the larger sputtering voltage.

36 MATERIALS SCIENCE↗

Properties of thin N-type Yb{sub 0.14}Co{sub 4}Sb{sub 12} and P-type Ce{sub 0.09}Fe{sub 0.67}Co{sub 3.33}Sb{sub 12} skutterudite layers prepared by laser ablation

The properties of thin thermoelectric layers (about 60 nm in thickness) prepared by pulsed laser deposition are presented. Hot pressed targets were made from ''middle'' temperature range thermoelectric bulk materials with the potential high figure of merit ZT. P-type and N-type layers were prepared from Yb{sub 0.19}Co{sub 4}Sb{sub 12} and Ce{sub 0.1}Fe{sub 0.7}Co{sub 3.3}Sb{sub 12} targets, respectively. The thin films were deposited on quartz glass substrates using KrF excimer laser. The individual layers were prepared by applying different laser beam energy densities (2 or 3 J cm{sup -2}) at several substrate temperatures (200, 250, or 300 deg. C). Crystallinity and composition of the layers were examined by x-ray diffraction and wavelength dispersive analysis, respectively. Homogeneity of Yb across a surface of the Yb filled film was explored by secondary ion mass spectrometry. The thermoelectric properties, the Seebeck coefficient, the electrical resistivity, and the power factor, for the best prepared P and N layer are presented in the temperature range from 300 to 500 K.

36 MATERIALS SCIENCE↗

Ion energy distributions, electron temperatures, and electron densities in Ar, Kr, and Xe pulsed discharges

Ion energy distributions (IEDs) were measured near the edge of Faraday-shielded, inductively coupled pulsed plasmas in Ar, Kr, or Xe gas, while applying a synchronous dc bias on a boundary electrode, late in the afterglow. The magnitudes of the full width at half maximum of the IEDs were Xe > Kr > Ar, following the order of the corresponding electron temperatures in the afterglow, T{sub e}(Xe) > T{sub e}(Kr) > T{sub e}(Ar). The measured decays of T{sub e} with time in the afterglow were in excellent agreement with predictions from a global model. Measured time-resolved electron and positive ion densities near the plasma edge did not decay appreciably, even in the 80 {mu}s long afterglow. This was attributed to transport of ions and electrons from the higher density central region of the plasma to the edge region, balancing the loss of plasma due to diffusion. This provides a convenient means of maintaining a relatively constant plasma density in the afterglow during processing using pulsed plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of inert gases on the reactive high power pulsed magnetron sputtering process of carbon-nitride thin films

The influence of inert gases (Ne, Ar, Kr) on the sputter process of carbon and carbon-nitride (CN{sub x}) thin films was studied using reactive high power pulsed magnetron sputtering (HiPIMS). Thin solid films were synthesized in an industrial deposition chamber from a graphite target. The peak target current during HiPIMS processing was found to decrease with increasing inert gas mass. Time averaged and time resolved ion mass spectroscopy showed that the addition of nitrogen, as reactive gas, resulted in less energetic ion species for processes employing Ne, whereas the opposite was noticed when Ar or Kr were employed as inert gas. Processes in nonreactive ambient showed generally lower total ion fluxes for the three different inert gases. As soon as N{sub 2} was introduced into the process, the deposition rates for Ne and Ar-containing processes increased significantly. The reactive Kr-process, in contrast, showed slightly lower deposition rates than the nonreactive. The resulting thin films were characterized regarding their bonding and microstructure by x-ray photoelectron spectroscopy and transmission electron microscopy. Reactively deposited CN{sub x} thin films in Ar and Kr ambient exhibited an ordering toward a fullerene-like structure, whereas carbon and CN{sub x} films deposited in Ne atmosphere were found to be amorphous. This is attributed to an elevated amount of highly energetic particles observed during ion mass spectrometry and indicated by high peak target currents in Ne-containing processes. These results are discussed with respect to the current understanding of the structural evolution of a-C and CN{sub x} thin films.

36 MATERIALS SCIENCE↗

Nanoscale topographic pattern formation on Kr{sup +}-bombarded germanium surfaces

The nanoscale pattern formation of Ge surfaces uniformly irradiated by Kr{sup +} ions was studied in a low-contamination environment at ion energies of 250 and 500 eV and at angles of 0 Degree-Sign through 80 Degree-Sign . The authors present a phase diagram of domains of pattern formation occurring as these two control parameters are varied. The results are insensitive to ion energy over the range covered by the experiments. Flat surfaces are stable from normal incidence up to an incidence angle of {theta} = 55 Degree-Sign from normal. At higher angles, the surface is linearly unstable to the formation of parallel-mode ripples, in which the wave vector is parallel to the projection of the ion beam on the surface. For {theta} {>=} 75 Degree-Sign the authors observe perpendicular-mode ripples, in which the wave vector is perpendicular to the ion beam. This behavior is qualitatively similar to those of Madi et al. for Ar{sup +}-irradiated Si but is inconsistent with those of Ziberi et al. for Kr{sup +}-irradiated Ge. The existence of a window of stability is qualitatively inconsistent with a theory based on sputter erosion [R. M. Bradley and J. M. Harper, J. Vac. Sci. Technol. A 6, 2390 (1988)] and qualitatively consistent with a model of ion impact-induced mass redistribution [G. Carter and V. Vishnyakov, Phys. Rev. B 54, 17647 (1996)] as well as a crater function theory incorporating both effects [S. A. Norris et al., Nat. Commun. 2, 276 (2011)]. The critical transition angle between stable and rippled surfaces occurs 10 Degree-Sign -15 Degree-Sign above the value of 45 Degree-Sign predicted by the mass redistribution model.

36 MATERIALS SCIENCE↗

Characteristics of LaB{sub 6} thin films grown by pulsed laser deposition

LaB{sub 6} thin films were deposited at a temperature of 500 °C under vacuum or Ar atmosphere by the pulsed laser deposition technique on (100) Si substrates using a KrF laser. Grazing incidence x-ray diffraction investigations found that films were nanocrystalline, with grain size dimensions from 86 to 102 nm and exhibited microstrain values around 1.1%. Simulations of the x-ray reflectivity curves acquired from the deposited films showed that films had a density around 4.55 g/cm{sup 3}, and were very smooth, with a surface roughness root-mean-square of 1.5 nm, which was also confirmed by scanning electron and atomic force microscopy measurements. All films were covered by a ∼2 nm thick contamination layer that formed when samples were exposed to the ambient. Auger electron spectroscopy investigations found very low oxygen impurity levels below 1.5 at. % once the contamination surface layer was removed by Ar ion sputtering. Four point probe measurements showed that films were conductive, with a resistivity value around 200 μΩ cm for those deposited under Ar atmosphere and slightly higher for those deposited under vacuum. Nanoindentation and scratch investigations showed that films were rather hard, H ∼ 16 GPa, E ∼ 165 GPa, and adherent to the substrate. Thermionic emission measurements indicated a work function value of 2.66 eV, very similar to other reported values for LaB{sub 6}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Collisional Broadening of CO{sub 2} Transition Lines 10{sup 0}0–00{sup 0}1 by Inert Gas Atoms at 300–700 K

Using a tunable CO{sub 2} laser, unsaturated absorption coefficients in pure CO{sub 2} and binary CO{sub 2} gas mixtures with inert gases He, Ar, Kr, and Xe in a 1 : 2 ratio at 100 Torr were measured at the central frequencies of the R(8), R(22), P(8), P(22), and P(32) CO{sub 2} spectral lines of the 10{sup 0}0-00{sup 0}1 transition at 300–700 K. The coefficients of the collisional broadening of the CO{sub 2} spectral lines by He, Ar, Kr, and Xe are determined. The obtained temperature dependences of the collisional broadening coefficients are approximated by power functions with two different degrees.

74 ATOMIC AND MOLECULAR PHYSICS↗

Inscription and Visualization of Tilted Fiber Bragg Gratings

Tilted fiber Bragg gratings with different tilt angles have been inscribed in single-mode isotropic optical fiber with an increased photorefractivity using Talbot interferometer and KrF-excimer laser system. Their spectra are studied. Using a confocal laser scanning luminescent microscope the images of gratings in transmitted light were obtained. The calculated dependence of the slope angle of the grating recorded in the Talbot interferometer on the angle between the strokes of the interference pattern created in the interferometer and the transverse section of the optical fiber is experimentally verified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Influence of Molecular Gas on the Apokamp Discharge Formation

Emission spectra of apokamp discharge plasma jets in CO{sub 2}, Ar, Kr, N{sub 2}, and their mixtures have been studied. It has been shown that the emission spectra of the Kr–N{sub 2} mixture contain N{sub 2} and N{sub 2}{sup +} bands, as well as Kr lines. The spectrum of the Ar–CO{sub 2} mixture is presented by bands of the Fox–Duffendack–Barker system and lines of the exited argon atom. In all gas media under study, the reduction of the molecular gas quantity leads to the transition from an apokampic discharge in the form of a diffusion jet developing from the current channel to a volume discharge with a strong transverse glowing. The experimental apparatus described in this work is proposed for use in laboratory investigations of spectral characteristics of transient luminous events observed in atmospheres of planets of the Solar System.

74 ATOMIC AND MOLECULAR PHYSICS↗

Many-body effects in the formation of multiply charged ions in a strong laser field

Some of the many-body effects in the formation of multiply charged ions in a laser field have been taken into account: inelastic tunneling, collective tunneling, and magnetic moment projection relaxation of the atomic core. Strong fields with an intensity exceeding 10{sup 17} W cm{sup -2} are considered when the magnetic component of the laser field acts on the free motion of a photoelectron; therefore, the formation of multiply charged ions through rescattering becomes unlikely. Numerical calculations have been performed for Ar{sup 9+} Horizontal-Ellipsis Ar{sup 13+}, Kr{sup 19+} Horizontal-Ellipsis Kr{sup 23+}, Rb{sup 10+}, and Rb{sup 11+} ions. A significant contribution of collective tunneling, which was not observed in weaker fields investigated previously, has been revealed. Allowance for collective tunneling is shown to reduce the intensity leading to saturation by more than 10%. In this case, the yield of multiply charged Rb ions changes by an order of magnitude, while the yield of multiply charged Ar and Kr ions changes by more than a factor of 2. Comparison with experimental data on the formation of argon ions under the action of a linearly polarized laser pulse is made.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photoionization of noble-gas atoms by ultrashort electromagnetic pulses

The photoionization of atoms of noble gases (Ar, Kr, and Xe) by ultrashort electromagnetic pulses of a corrected Gaussian shape is studied theoretically. Computations are performed in the context of perturbation theory using a simple expression for the total probability of photoionization of an atom by electromagnetic pulses. The features of this process are revealed and analyzed for various ranges of the parameters of the problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mixing of prolate and oblate shapes by tunneling in {gamma} direction

The equation is derived, similar to the Bohr-Mottelson one, which describes the rotation and vibrations of the nuclear ellipsoid of inertia. Using it we considered the dynamics of nonrotating nuclei, whose energy landscape has minima corresponding to prolate and oblate shapes, connected by the collective path, along which the triaxiality parameter {gamma} varies from {gamma} = 0 to {pi}/3. Peculiarities of the barrier tunneling in {gamma} direction are considered with the aid of the modified WKB approximation. The electric-monopole-transition strength between the levels of the ground 0{sup +} doublet of the nuclei with mixed prolate-oblate shapes is calculated. The results are consistent with the experimental data for Kr isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Azimuthal correlation and collective behavior in nucleus-nucleus collisions

Various flow effects of nuclear and hadronic origin are investigated in nucleus-nucleus collisions. Nuclear emulsion data collected from {sup 84}Kr + Ag/Br interaction at an incident energy of 1.52 GeV per nucleon and from {sup 28}Si + Ag/Br interaction at an incident energy of 14.5 GeV per nucleon are used in the investigation. The transverse momentum distribution and the flow angle analysis show that collective behavior, like a bounce-off effect of the projectile spectators and a sidesplash effect of the target spectators, are present in our event samples. From an azimuthal angle analysis of the data we also see a direct flow of the projectile fragments and of the produced charged particles. On the other hand, for both data samples the target fragments exhibit a reverse flow, while the projectile fragments exhibit an elliptic flow. Relevant flow parameters are measured.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Irradiation of nuclear track emulsions with thermal neutrons, heavy ions, and muons

Exposures of test samples of nuclear track emulsion were analyzed. Angular and energy correlations of products originating from the thermal-neutron-induced reaction n{sub th} +{sup 10} B → {sup 7} Li + (γ)+ α were studied in nuclear track emulsions enriched in boron. Nuclear track emulsions were also irradiated with {sup 86}Kr{sup +17} and {sup 124}Xe{sup +26} ions of energy about 1.2 MeV per nucleon. Measurements of ranges of heavy ions in nuclear track emulsionsmade it possible to determine their energies on the basis of the SRIM model. The formation of high-multiplicity nuclear stars was observed upon irradiating nuclear track emulsions with ultrarelativistic muons. Kinematical features studied in this exposure of nuclear track emulsions for events of the muon-induced splitting of carbon nuclei to three alpha particles are indicative of the nucleardiffraction interaction mechanism.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗