Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “kinetic stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Development of In-Situ Corrosion Kinetics and Salt Property Measurements (Final Technical Report)

The goal of this research is to fill the knowledge gaps of salt properties and gain a fundamental understanding of corrosion mechanisms, thereby to guiding material selections of salts and containment materials. The proposed research is focused on building unique cross-cutting research capabilities that can perform research and analysis relevant to the following three research topics important for Generation 3 Concentrating Solar Power Systems: (1) Material characterization including investigations of fluid thermophysical properties and stability, (2) Durability testing of containment materials, and (3) Corrosion behavior characterization relative to levels of known contaminants (e.g., water and oxygen) in Heat Transfer Fluid (HTF).

14 SOLAR ENERGY↗
DOE OSTI2024

Investigating the Crosslinking, Degradation, and Adhesion Behavior of Photovoltaic Encapsulants Under Thermal Accelerated Aging

Degradation of photovoltaic (PV) module encapsulant characteristics that lead to mechanical embrittlement and delamination remains a cause of failure in solar installations. A multiscale reliability model connecting the encapsulant mechanical and fracture properties to the degraded molecular structure and interfacial bonding to adjacent solar cell and glass substrates was previously published. The model, developed primarily for poly(ethylene-co-vinyl acetate) acetate (EVA) encapsulants, remains to be experimentally validated. Determining the degradation and crosslinking kinetics of alternative encapsulants, such as polyolefin elastomer (POE) and EVA/POE/EVA composites (EPE), can generalize the model. In this work, we subject fully cured EVA, POE, and EPE encapsulants to accelerated thermal aging to determine how high temperatures impact reaction kinetics. An increase in gel content (crosslinking) and decrease in crystallinity of the encapsulants under hot-aerobic (90 degrees C, 22% RH) and hot-anaerobic (90 degrees C, sealed in N 2 air) aging were observed, even in the absence of UV and crosslinking initiators. Fourier transform infrared spectroscopy (FTIR)-attenuated total reflectance analysis showed insignificant encapsulant degradation, demonstrating the critical role of UV and moisture in accelerating degradation. Adhesion testing performed on coupon-level specimens (cell/encapsulant/glass laminates) showed decreases in adhesion energy, Gc , from 5000 h of hot-dry (90 degrees C, ~1% RH) and hot-humid (90 degrees C, 60% RH) aging. POE coupons demonstrated the best stability, followed by EPE then EVA. For EVA and POE, hot-humid aged coupons experienced a larger decrease in Gc due to enhanced hydrolytic degradation. Hot-dry aging condition demonstrated that thermal degradation of the interface could be significant even if the encapsulant experiences negligible degradation in the absence of UV and elevated humidity.

accelerated aging↗
DOE OSTI2021

Defect–Concentration–Mediated T–Nb 2 O 5 Anodes for Durable and Fast–Charging Li–Ion Batteries

Metastable orthorhombic niobium pentoxide (T-Nb 2 O 5 ) is a promising anode to fulfill the requirements for high-rate Li-ion batteries (LIBs). Stoichiometric T-Nb 2 O 5 is plagued by low electric conductivity and particle pulverization after repeated charge/discharge processes. In this work, oxygen vacancies are implanted into T-Nb 2 O 5 particles via acid immersion of Nb 2 O 5 ·nH 2 O with the formation of Lewis acid sites. The multiple characterizations and simulations reveal the lengthening of Nb–O bonds, and the transformation from NbO 7 pentagonal bipyramids and NbO 6 tetragonal bipyramids in T-Nb 2 O 5–x . The enrichment of oxygen vacancies endows T-Nb 2 O 5–x with higher electric conductivity, better electrochemical kinetics, larger pseudocapacitive contribution. O-doped graphitic C 3 N 4 is creatively proposed as a trace oxygen pump to repair excessive oxygen vacancies, and it also serves as a sacrifice template for Nb 2 O 5–x growth to construct a porous and monolithic electrode network. Defect-modulated Nb 2 O 5–x displays extraordinary cycling stability (164 mAh g –1 at 5 C after 1100 cycles), high capacity retention (104 mAh g –1 ) at an ultrahigh rate (25 C), and large areal capacity (0.74 mAh cm –2 ) under high mass loading (4 mg cm –2 ). The practical prospect is proved by Nb 2 O 5–x /LiNi 0.8 Co 0.1 Mn 0.1 O 2 full cells with high average platform (2.12 V) and high specific capacity (229 mAh g –1 ). Finally, the oxygen-defect modulation strategy on oxide anodes provides an alternative solution to fast-charging and durable LIBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Interfacial Water Manipulation with Ionic Liquids for the Oxygen Reduction Reaction

The role that interfacial water plays in both promoting and inhibiting the electrochemical oxygen reduction reaction (ORR) remains somewhat unclear and controversial. Here, we use electroanalytical chemistry, spectroscopy, and microkinetic modeling to probe the impact of hydrophobic ionic liquid (IL) thin films on interfacial water structure and its role in promoting or inhibiting the ORR. Through the use of in situ ATR-SEIRAS, we find that the IL thin films limit the content of water at the interface and prevent the formation of hydrogen bond stabilized water organization. The impact of this exclusion of water on the promotion of the ORR is through the reduced coverage of OH ad spectator species. The decreased solvation of “active” OH ad species weakens its interaction with the catalyst surface, lowering the barrier to the last step in the ORR mechanism. This “destabilized” OH ad impact on ORR kinetics is confirmed through a microkinetic model. Furthermore, the results presented here highlight the mechanistic pathway through which hydrophobic ILs enhance ORR kinetics and point to pathways to both further improve this performance enhancement and the potential for integration of hydrophobic ILs into other technologically relevant elementary electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synergistic effects of Pd single atoms and nanoclusters boosting SnO 2 gas sensing performance

Tin(IV) oxide-supported Pd is a promising heterogenous catalyst for CO oxidation relevant for environmental cleanup reactions. In this study, an atomically dispersed Pd catalyst on SnO 2 (ADC Pd/SnO 2 ) hybrid material is successfully synthesized via a straightforward wet chemistry method and is found to exhibit superior performance toward CO sensing. Ex situ EXAFS analysis confirms the formation of single Pd atoms and small Pd nanoclusters stabilized on the SnO 2 (110) surface. Further, the material exhibits high efficiency in generating adsorbed O 2 - as well as high activity in catalyzing CO oxidation at low temperatures, resulting in exceptional sensitivity and selectivity toward CO in comparison to pure SnO 2 and Pd nanoparticles loaded on SnO 2 respectively. In situ FTIR measurements unravel CO adsorption kinetics on ADC Pd/SnO 2 under reaction conditions, and a possible sensing mechanism is put forth in which CO is transformed into CO 2 by reaction with active oxygen species; and concurrently, carbon-related species (bicarbonates and carbonates) are formed and decomposed into CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fuel Flow Modeling under Thermal Fluidics Considerations within Operational Domains of Molten Salt Reactors

Molten Salt Reactors (MSRs) offer significant versatility supported by their design flexibility and safety advantages due to high temperatures, design customization capabilities, strong negative reactivity feedback effects, and salt chemistry characteristics. Different control schedules and different mass flow rates in the MSR primary systems impact neutronics and thermal hydraulics coupling. The result is two-fold. First, it leads to adaptability in various applications when the customization of a MSR unit is desired. Second, it calls for the quantification of dynamics and safety characteristics to assess the operational domain and make sure reactor stability and inherent safety characteristics are maintained. This paper provides an in-depth transient analysis of the operational implications of MSRs having heat-generating fuel and heat-transporting salt mixed forming liquid fuel salts contained within primary systems. A coupling model was developed to simulate fuel flow in molten salt reactors. A zero-dimensional reactor kinetics model was used with a one-dimensional heat transfer model in the reactor core. The temperature reactivity feedbacks of the fuel salt resulting from the thermal-hydraulics model were used in the reactor kinetics model to complete the coupled code. The model was applied to simulate the Molten Salt Breeder Reactor (MSBR) response at steady state and transients. The developed model was shown to be a suitable tool for the dynamic analysis of molten salt reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Hypochlorite Redox Chemistry Enables High-Voltage and High-Power Saltwater Batteries

Saltwater batteries (SWBs) are promising alternatives to lithium-ion batteries for large-scale stationary energy storage. However, the performance of conventional oxygen redox-based saltwater battery systems is often constrained by sluggish oxygen evolution and reduction reactions (OER/ORR) at the cathode, leading to low voltage efficiency and limited power density. Here, OER and ORR are replaced by hypochlorite-based redox reactions through the introduction of sodium hypochlorite into saltwater. Operando pH and dissolved oxygen measurements confirm that OER and ORR are minimized and that hypochlorite redox reactions dominate the cathode behavior. Owing to the higher operating potential and faster reaction kinetics, the hypochlorite-redox-based SWBs delivers a higher discharge voltage of 3.3 V and reduced charge-discharge voltage polarization to 0.66 V. Further improvement is achieved by adjusting the saltwater pH to near-neutral conditions, increasing the discharge voltage to 3.5 V and more than doubling the peak power. The hypochlorite redox environment also exhibits chemical stability with key cell components, including the solid electrolyte and cathode current collectors. Operation of series-connected cells and cells employing hard carbon anodes demonstrates scalability and compatibility with alternative anode materials. These results provide a strong foundation for next-generation SWBs targeting large-scale stationary energy storage applications.

Go, Wooseok [ORNL]↗
DOE OSTI2022

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple–Conducting Oxides for Protonic Ceramic Electrochemical Cells

Porous electrodes that conduct electrons, protons, and oxygen ions with dramatically expanded catalytic active sites can replace conventional electrodes with sluggish kinetics in protonic ceramic electrochemical cells. In this work, a strategy is utilized to promote triple conduction by facilitating proton conduction in praseodymium cobaltite perovskite through engineering non-equivalent B-site Ni/Co occupancy. Surface infrared spectroscopy is used to study the dehydration behavior, which proves the existence of protons in the perovskite lattice. The proton mobility and proton stability are investigated by hydrogen/deuterium (H/D) isotope exchange and temperature-programmed desorption. It is observed that the increased nickel replacement on the B-site has a positive impact on proton defect stability, catalytic activity, and electrochemical performance. This doping strategy is demonstrated to be a promising pathway to increase catalytic activity toward the oxygen reduction and water splitting reactions. The chosen PrNi 0.7 Co 0.3 O 3–δ oxygen electrode demonstrates excellent full-cell performance with high electrolysis current density of –1.48 A cm –2 at 1.3 V and a peak fuel-cell power density of 0.95 W cm –2 at 600 °C and also enables lower-temperature operations down to 350 °C, and superior long-term durability.

08 HYDROGEN↗
DOE OSTI2020

A phase-field model for non-isothermal phase transformation and plasticity in polycrystalline yttria-stabilized tetragonal zirconia

Here we propose an elastoplastic phase-field (PF) model to investigate the mechanics of tetragonal-to-monoclinic phase transformation (TMPT) and elastoplastic deformation of polycrystalline yttria-stabilized tetragonal zirconia (YSTZ). A Landau polynomial with non-vanishing chemical energy at the equilibrium temperature is introduced to account for the actual formation energies of the phases. The effects of different grain orientations, latent heat, and temperature on TMPT and deformation mechanisms are considered. The suppressive transformation effects of the grain boundaries (GBs) is modeled using an inhomogeneous kinetic coefficient in the bulk and GBs. The simulation results for single crystals demonstrate the capability of the model to reproduce the orientation-dependent compressive deformation of YSTZ similar to atomistic simulations and micropillar experiments. The single crystal with [100] crystallographic orientation along the loading direction (SC[100]) displays both TMPT and plasticity, SC[101] experiences only phase transformation, while SC[001] undergoes only plastic yielding. The TMPT induced by compressive loading exhibits shape memory effect (SME) below the equilibrium transformation temperature and pseudoelasticity above it, while the critical transformation stress increases with increasing loading temperature. The irrecoverable plastic strain is found to trap a part of the monoclinic phase, which prevents a complete reverse transformation. The polycrystalline cases also display SME and PE at low and high temperatures, respectively. Due to the orientation differences between grains and the stress concentrations at geometric nonlinearities, plastic deformation occurs in polycrystalline YSTZ for an applied load less than the yield stress. The results suggest a possible limitation of plasticity and an improvement of the shape recovery of YSTZ if one can control the orientation of the grains and/or increase the density of stacking faults at the GBs during material processing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A mini review of cobalt-based nanocatalyst in Fischer-Tropsch synthesis

Fischer-Tropsch (F-T) synthesis, converting syngas to hydrocarbons, provides a green alternative for fuel production. Cobalt is one of the most intensively studied F-T catalysts due to its great activity, high stability, and relatively low cost. Overall, in this mini review, we summarized some recent advancements in the development of cobalt-based F-T catalysts focusing on the effects of particle size, surface oxidation states, crystallography, and bimetallic particles, with emphasis on the research from our group. Furthermore, non-steady state conditions were investigated to access the initial kinetics using chemical transient kinetics (CTK) experiments, which could bring more insights into the reaction mechanism and catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Poison or Promoter? Investigating the Dual-Role of Carbon Monoxide in Pincer-Iridium-Based Alkane Dehydrogenation Systems via Operando Diffuse Reflectance Infrared Fourier Transform Spectroscopy

Pincer-ligated iridium complexes of the form [( R 4 PCP)IrL] ( R 4 PCP = κ 3 -C 6 H 3 -2,6-(XPR 2 ) 2 ; X = CH 2 , O; R = tBu, iPr) have previously been shown competent for acceptorless alkane dehydrogenation when supported on silica. It was observed by postcatalysis solid-state NMR that silica-tethered [(≡SiO- tBu 4 POCOP)Ir(C 2 H 4 )] (3-C 2 H 4 ) was converted fully to [(≡SiO- tBu 4 POCOP)Ir(CO)] (3-CO) at 300 °C. In this work, the characterization of species under dehydrogenation reaction conditions far from equilibrium between butane and butenes (approach to equilibrium Q/K eq = 0.3 at 300 °C) is performed with operando Diffuse Reflectance Infrared Fourier–Transform Spectroscopy (DRIFTS) to show the kinetics of species conversion from 3-C 2 H 4 to 3-CO. It is further found that [(≡SiO- tBu 4 POCOP)IrHCl] (3-HCl), a species considered to be a precatalyst for alkane dehydrogenation, is also fully converted to 3-CO. Here, a mechanism of decomposition is proposed that implicates surface silanol groups, while carbon monoxide acts as a “stabilizer” for the catalyst by promoting their reductive elimination and maintaining the complex in the I oxidation state.

02 PETROLEUM↗
DOE OSTI2021

Gas Phase Synthesis of Benzene via the Propargyl Radical Self-Reaction

Polycyclic Aromatic Hydrocarbons (PAHs) have been invoked in fundamental molecular mass growth processes in our galaxy. We provide compelling evidence of the formation of the very first ringed aromatic and building block of PAHs - benzene - via the self-recombination of two resonantly stabilized propargyl (C 3 H 3 ) radicals in dilute environments using isomer selective synchrotron-based mass spectrometry coupled to theoretical calculations. Along with benzene, three other structural isomers (1,5-hexadiyne, fulvene, 2-ethynyl-1,3-butadiene) and o-benzyne are detected and their branching ratios quantified experimentally and verified with the aid of computational fluid dynamics and kinetic simulations. Furthermore, these results uncover molecular growth pathways not only in interstellar, circumstellar, and solar systems environments, but also in combustion systems gaining us a better understanding of the hydrocarbon chemistry of our universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Surface Regulating of a Double–Perovskite Electrode for Protonic Ceramic Fuel Cells to Enhance Oxygen Reduction Activity and Contaminants Poisoning Tolerance

Protonic ceramic fuel cells (PCFCs) are one of the most efficient energy conversion devices. However, the performance of current PCFCs is greatly limited by the sluggish oxygen reduction reaction (ORR) kinetics and the fast degradation of cathode due to contaminants poisoning (such as Cr species and steam). In this work, we report a surface regulating of a double perovskite PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ (PBSCF) cathode by a Pr 0.9 Fe 0.7 Co 0.3 O 3 (PFC) catalyst coating to enhance the ORR activity and stability. When tested in direct contact with Cr in the air with 3% H 2 O at 650 °C, the polarization resistance (Rp) of the PFC-PBSCF electrode increases from $\approx$0.39 to 0.45 Ω cm 2 after 100 h operation; in contrast, the R p of a PBSCF electrode increases from 0.63 to 0.82 Ω cm 2 . Further, a PCFC with the PFC-PBSCF cathode demonstrates an excellent peak power density ($\approx$1.08 W cm -2 at 650 °C) and significantly enhanced durability (degradation rate of 0.03 % h -1 ), much better than those of the cells with a PBSCF cathode ($\approx$0.75 W cm -2 and degradation rate of 0.12 % h -1 ). Raman spectroscopy and density functional theory calculations indicate that the PFC catalyst coating diminishes the formation of Cr species, such as (Ba 1-x Sr x )CrO 4 , on the cathode surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Long-Term Degradation of Passivated Emitter and Rear Contact Silicon Solar Cell under Light and Heat

Advanced designs enable high-efficiency solar cells; however, more complex structures create new long-term stability concerns. Herein, the long-term degradation processes affecting advanced silicon solar cells using laboratory-based illumination and heating over hundreds of hours are investigated. The activation energy for the degradation of voltage is estimated and the degradation rates to normal solar cell operating temperature ranges are extrapolated. The cell degradation observed at high temperatures in the lab is kinetically similar to the process affecting field-deployed modules contributing to 0.37% year-1 of annualized degradation. Electroluminescence and photoluminescence mapping show that the degradation is dominated by minority carrier lifetime reduction. Suns-open-circuit voltage and light beam-induced current results indicate that the degradation could result from passivation degradation at the surface or defect formation in the near-subsurface region, leading to increased minority carrier recombination. This work highlights a long-term degradation process under elevated temperature and illumination that may continue to affect cells in an irreversible manner that is separate from recoverable light-induced degradation and light- and elevated temperature-induced degradation.

14 SOLAR ENERGY↗
DOE OSTI2025

From Micro-environments to Macroscopic Effects: How the Alkaline Hydrogen Evolution Reaction Drives Cu Cathodic Corrosion

Cathodic corrosion of copper (Cu) has posed a significant challenge for over a century, impeding various technological progresses such as electrochemical conversion of CO 2 (eCO 2 RR) into fuels and other value-added carbon products. Here, in this study, employing a combined Density Functional Theory (DFT) and kinetic Monte Carlo (kMC) simulation approach, we delve into the atomistic level mechanism driving this phenomenon in Cu. Our hypothesis posits the pivotal role of alkaline hydrogen evolution reaction (HER) in facilitating cathodic corrosion in Cu. We rigorously develop a pH-dependent hydroxide (OH) adsorption mechanism and calculate the equilibrium OH coverage (𝜃 OH ) at varying pH levels, the thermodynamic stability of subsurface oxygen (O sub ), as well as the Cu-vacancy mediated diffusion of subsurface oxygens (O sub ). Through comprehensive analysis, we establish correlation among various microenvironments, including oxygen diffusion in subsurface layers, pH-dependent OH adsorption, and Cu dissolution into the electrolyte as (Cu-OH) complexes. Furthermore, our investigation explores the correlation between surface coordination environment of active sites and cathodic corrosion of Cu. Finally, by integrating DFT-derived thermodynamic data into a kMC model, we successfully predict the formation of experimentally observed corrosion pits on Cu-surfaces. This combined approach not only advances our fundamental understanding of Cu cathodic corrosion but also offers insights crucial for developing effective corrosion mitigation strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Generalized kinetic equation for tokamak plasma equilibrium distribution function

A generalised kinetic equation for the equilibrium distribution function in a finite beta, arbitrary tokamak plasma is derived. The equation is correct to second order in ρ/L (ρ is the particle Larmor radius and L is the system size). Resolving finite Larmor radius length scales with no restriction on the ratio of poloidal to total equilibrium magnetic field, B $\vartheta$ /B, it generalises the drift kinetic theory of [Hazeltine Phys. Plasmas 15 (1973) 77] to the limit of B $\vartheta$ /B ~ 1 (e.g. to ensure validity for spherical tokamaks). Two cases are considered. The first provides the equilibrium distribution function, consistent with the generalised gyrokinetic formalism of [Dudkovskaia et al. Plasma Phys. Control. Fusion 65 (2023) 045010], derived specifically to capture neoclassical equilibrium currents in gyrokinetic stability analyses in strong gradient regions. The second assumes short length scales in the direction perpendicular to the magnetic field, which can occur as a result of small coherent magnetic structures in the plasma, such as neoclassical tearing mode magnetic islands close to threshold. This then extends the drift island equations of [Dudkovskaia et al. Nucl. Fusion 63 (2023) 016020] for the plasma response to magnetic islands to a spherical tokamak plasma configuration. In conclusion, resolving ρ ~ ρ $\vartheta$ (or B $\vartheta$ ~ B), where ρ $\vartheta$ is the particle poloidal Larmor radius, is also expected to influence calculations of the magnetic island propagation frequency and the associated contributions to the island onset conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electrolytes with moderate lithium polysulfide solubility for high-performance long-calendar-life lithium–sulfur batteries

Lithium–sulfur (Li-S) batteries with high energy density and low cost are promising for next-generation energy storage. However, their cycling stability is plagued by the high solubility of lithium polysulfide (LiPS) intermediates, causing fast capacity decay and severe self-discharge. Exploring electrolytes with low LiPS solubility has shown promising results toward addressing these challenges. However, here, we report that electrolytes with moderate LiPS solubility are more effective for simultaneously limiting the shuttling effect and achieving good Li-S reaction kinetics. We explored a range of solubility from 37 to 1,100 mM (based on S atom, [S]) and found that a moderate solubility from 50 to 200 mM [S] performed the best. Using a series of electrolyte solvents with various degrees of fluorination, we formulated the S ingle- S olvent, S ingle- S alt, S tandard S alt concentration with M oderate L i PSs so l ubility E lectrolytes (termed S 6 MILE ) for Li-S batteries. Among the designed electrolytes, Li-S cells using fluorinated-1,2-diethoxyethane S 6 MILE (F4DEE-S 6 MILE) showed the highest capacity of 1,160 mAh g −1 at 0.05 C at room temperature. At 60 °C, fluorinated-1,4-dimethoxybutane S 6 MILE (F4DMB-S 6 MILE) gave the highest capacity of 1,526 mAh g −1 at 0.05 C and an average CE of 99.89% for 150 cycles at 0.2 C under lean electrolyte conditions. This is a fivefold increase in cycle life compared with other conventional ether-based electrolytes. Moreover, we observed a long calendar aging life, with a capacity increase/recovery of 4.3% after resting for 30 d using F4DMB-S 6 MILE. Furthermore, the correlation between LiPS solubility, degree of fluorination of the electrolyte solvent, and battery performance was systematically investigated.

25 ENERGY STORAGE↗