Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “imaging and sensing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Shuttle imaging spectrometer optics

This paper discusses the optical design and performance of the Shuttle Imaging Spectrometer (SISEX) optical system, which is being planned for the next generation of Earth remote sensing instruments. This optical system represents a new approach to remote sensing in which wide-field optics, dispersing elements, and area detector arrays are used in place of mechanical scanners, filters, and discrete detector elements or linear arrays. While the SISEX optical system is designed specifically for flight on Shuttle, the same optical approach is being used in the design of other remote sensing instruments, such as the High Resolution Imaging Spectrometer, which is expected to fly on the Earth Observing System.

Page, N. A.↗
NASA NTRS1996

Application of magnetospheric imaging techniques to global substorm dynamics

The application of remote sensing techniques to the analysis of the dynamics of storms and substorm processes is discussed. The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission, its mission and instruments are presented. The following are discussed: neutral atom imaging; radio plasma techniques; photon imaging, and substorm observations.

Green, James L.↗
NASA NTRS1993

Mercury - Full-disk radar images and the detection and stability of ice at the North Pole

The first full-disk radar images of Mercury are discussed. About 77 percent of the surface was imaged at resolutions as good as 150 km. The North Pole was visible at the time of the observations, and the feature with the highest same sense (SS) circular reflectivity in the images is near the nominal polar position. The peak SS reflectivity of this feature is 7.9 percent and the circular polarization ratio through much of it is over one. The diameter of the feature is estimated to be less than about 350 km. The signal strength and polarization characteristics suggest the presence of very clean ices deposited in a relatively short period. The reflectivity of the north polar feature is slightly depressed compared to absolute reflectivities of other ice bodies and regions in the solar system. This may be due to a layer of dust or soil covering the ice. Other prominent features in the unphotographed hemisphere correpond to positions where atmospheric sodium enhancements have been measured from earth. These sites may be large basins similar to the Caloris basin.

Butler, Bryan J.↗
NASA NTRS2001

Deriving the Coronal Magnetic Field Using Parametric Transformation Analysis

When plasma-beta greater than 1 then the gas pressure dominates over the magnetic pressure. This ratio as a function along the coronal magnetic field lines varies from beta greater than 1 in the photosphere at the base of the field lines, to beta much less than 1 in the mid-corona, to beta greater than 1 in the upper corona. Almost all magnetic field extrapolations do not or cannot take into account the full range of beta. They essentially assume beta much less than 1, since the full boundary conditions do not exist in the beta greater than 1 regions. We use a basic parametric representation of the magnetic field lines such that the field lines can be manipulated to match linear features in the EUV and SXR coronal images in a least squares sense. This research employs free-form deformation mathematics to generate the associated coronal magnetic field. In our research program, the complex magnetic field topology uses Parametric Transformation Analysis (PTA) which is a new and innovative method to describe the coronal fields that we are developing. In this technique the field lines can be viewed as being embedded in a plastic medium, the frozen-in-field-line concept. As the medium is deformed the field lines are similarly deformed. However the advantage of the PTA method is that the field line movement represents a transformation of one magnetic field solution into another magnetic field solution. When fully implemented, this method will allow the resulting magnetic field solution to fully match the magnetic field lines with EUV/SXR coronal loops by minimizing the differences in direction and dispersion of a collection of PTA magnetic field lines and observed field lines. The derived magnetic field will then allow beta greater than 1 regions to be included, the electric currents to be calculated, and the Lorentz force to be determined. The advantage of this technique is that the solution is: (1) independent of the upper and side boundary conditions, (2) allows non-vanishing magnetic forces, and (3) provides a global magnetic field solution, which contains high- and low-beta regimes and maximizes the similarity between the field lines structure and all the coronal images of the region. The coronal image analysis is crucial to the investigation and for the first time these images can be exploited to derive the coronal magnetic field in a well-posed mathematical formulation. This program is an outgrowth of an investigation in which an extrapolated potential field was required to be "inflated" in order to have the field lines match the Yohkoh/SXT images. The field lines were radially stretched resulting in a better match to the coronal loops of an active region. The PTA method of radial and non-radial deformations of field lines to provide a match to the EUV/SXR images will be presented.

Gary, G. Allen↗
DOE OSTI2026

VoroClust: Scalable Clustering for Remote Sensing

Although supervised machine learning provides a powerful framework for image classification and segmentation, it requires comprehensive consistent datasets, which are not available for many remote-sensing applications. Remote-sensing datasets are expensive to collect, and each is acquired under different environmental conditions or with significant variations in system operating parameters. Unsupervised clustering algorithms analyze the structure of each dataset independently, rather than drawing on similarities with existing “training” examples, and are thus well suited for practical remote-sensing applications. We introduce VoroClust, a fast density-based unsupervised clustering algorithm applicable to high-resolution and high-dimensional data. VoroClust runs as fast as distance-based clustering methods, while capturing complex regional geometries at least as well as current-density-based methods. It uses a data-centered sphere cover to reduce computational demands, while still capturing data topology. It then propagates clusters outward from local peaks in density. We show that VoroClust provides fast state-of-the-art clustering for both high-resolution polarimetric synthetic aperture radar and high-dimensional hyperspectral imaging datasets.

42 ENGINEERING↗
NASA NTRS1978

Use of satellite images in the evaluation of farmlands

Remote sensing techniques in the evaluation of farmland in Mexico are discussed. Electronic analysis techniques and photointerpretation techniques are analyzed. Characteristics of the basic crops in Mexico as related to remote sensing are described.

Lozano H., A. E.↗
NASA NTRS1987

Remote sensing technology and applications

Electro-optical imaging sensors form the principal devices that are typically used to obtain images of earth from satellite platforms, and substantial improvements in optics, electro-optical detection devices, cooling subsystems and composite structures have enabled the high quality performance exhibited by the current instrumentation. This paper reviews the fundamentals of system design for imaging sensors such as the Thematic Mapper on board Landsat, points out the key areas of current R&D, and briefly alludes to some important applications.

Schueler, C. F.↗
NASA NTRS2006

Satellite Multiangle Spectropolarimetric Imaging of Aerosols

A proposed remote-sensing instrument, to be carried aboard a spacecraft in orbit around the Earth, would gather data on the spatial distribution and radiative characteristics of tropospheric aerosols. These data are needed for better understanding of the natural and anthropogenic origins of aerosols, and of the effects of aerosols on climate and atmospheric chemistry.

Diner, David↗
NASA NTRS1991

Aperture synthesis concepts in microwave remote sensing of the earth

The application of aperture synthesis concepts, used for many years in radio astronomy to achieve high image resolution at a reasonable cost, to remote sensing technology is discussed. The electronically scanned thinned array radiometer (ESTAR) is put forward as a viable alternative to improve spatial resolution by an order of magnitude over what is presently achieved by microwave imaging systems that are collecting data from earth orbit. Future developments in airborne sensor technology and potential spacecraft application are described.

Swift, Calvin T.↗
NASA NTRS2021

3D Cloud Tomography and Droplet Size Retrieval from Multi-Angle Polarimetric Imaging of Scattered Sunlight from Above

Tomography aims to recover a three-dimensional (3D) density map of a medium or an object. In medical imaging,it is extensively used for diagnostics via X-ray computed tomography (CT). We define and derive a tomographyof cloud droplet distributions via passive remote sensing. We use multi-view polarimetric images to fit a 3Dpolarized radiative transfer (RT) forward model. Our motivation is 3D volumetric probing of vertically-developedconvectively-driven clouds that are ill-served by current methods in operational passive remote sensing. Currenttechniques are indeed based on strictly 1D RT modeling and applied to a single cloudy pixel, where cloud geometrydefaults to that of a plane-parallel slab. Incident unpolarized sunlight, once scattered by cloud droplets, changesits polarization state according to droplet size. Therefore, polarimetric measurements in the rainbow and gloryangular regions can be used to infer the droplet size distribution. This work defines and derives a framework for afull 3D tomography of cloud droplets for both their mass concentration in space and their distribution across arange of sizes. This gridded 3D retrieval of key microphysical properties is made tractable by our novel approachthat involves a restructuring and partial linearization of an open-source polarized 3D RT code to accommodate aspecial two-step iterative optimization technique. Physically-realistic synthetic clouds are used to demonstrate themethodology with rigorous uncertainty quantification, while a real-world cloud imaged by AirMSPI is processedto illustrate the new remote sensing capability

Schechner, Yoav Y.↗
NASA NTRS1993

Filtering Interpolators for Image Comparison Algorithms

Comparing two or more images, either by differencing or ratioing, is important to many remote sensing problems. Because the pixel sample points for the images are (almost) always separated by some nonzero shift, a resampling, or interpolation, process must be performed if one image is to be accurately compared to another. Considered in Fourier space, an interpolator acts as a filter that attenuates some frequencies (usually high) of the image. Thus, when the shifted and unshifted images are compared, the former has been filtered, while the latter has not; the effect of this difference is called interpolation error. The key idea of this paper is to apply a filter to the unshifted image that matches the filtering effect of applying the interpolator to the shifted image, thereby drastically reducing interpolation error. The resulting interpolators, called filtering interpolators, are derived and discussed in detail elsewhere. Basic results will be given in this presentation.

Lucke, R. L.↗
DOE OSTI2020

Early High-contrast Imaging Results with Keck/NIRC2-PWFS: The SR 21 Disk

High-contrast imaging of exoplanets and protoplanetary disks depends on wave front sensing and correction made by adaptive optics instruments. Classically, wave front sensing has been conducted at optical wavelengths, which made high-contrast imaging of red targets such as M-type stars or extincted T Tauri stars challenging. Keck/NIRC2 has combined near-infrared (NIR) detector technology with the pyramid wave front sensor (PWFS). With this new module we observed SR 21, a young star that is brighter at NIR wavelengths than at optical wavelengths. Compared with the archival data of SR 21 taken with the optical wave front sensing we achieved ~20% better Strehl ratio in similar natural seeing conditions. Further post-processing utilizing angular differential imaging and reference-star differential imaging confirmed the spiral feature reported by the Very Large Telescope/Spectro-Polarimetric High-contrast Exoplanet REsearch instrument polarimetric observation, which is the first detection of the SR 21 spiral in total intensity at L' band. We also compared the contrast limit of our result (10 -4 at 0.'4 and 2 × 10 -5 at 1.'0) with the archival data that were taken with optical wave front sensing and confirmed the improvement, particularly at ≤0.'5. Our observation demonstrates that the NIR PWFS improves AO performance and will provide more opportunities for red targets in the future.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2006

Use of Photoelastic Modulators for High-accuracy Spectropolarimetric Imaging of Aerosols

Passive multiangular, multispectral, and polarimetric sensing approaches each have unique strengths for the measurement of tropospheric aerosol column abundances and microphysical properties. Current spaceborne multispectral and multiangular aerosols sensors operate at approximately 1 km resolution. Under NASA's Instrument Incubator Program, we are developing an electro-optic imaging approach that will enable adding high-accuracy polarimetry to such observations. To achieve a degree of linear polarization (DOLP) uncertainty of 0.5%, our approach temporally modulates the linear-polarization component of incoming light at a rapid rate, enabling each detector within a focal-plane array, combined with polarization analyzers, to measure the relative proportions of the linear Stokes components Q or U to the total intensity. Our system uses tandem photoelastic modulators (PEMs) within a high-reflectance, low diattenuation camera design. The two PEMs vibrate at slightly different resonant frequencies, leading to modulation of the polarized light at a heterodyne frequency of ~25 Hz. High-speed (1 kHz) readout of the detector arrays samples the output waveforms from which Q/I and U/I are derived. We report on experimental and theoretical analyses of PEM and optical system performance, along with plans for developing ruggedized PEMs capable of withstanding launch and on-orbit stresses.

photoelastics↗
NASA NTRS1990

Aircraft-based radiometric imaging of tropospheric temperature and precipitation using the 118.75-GHz oxygen resonance

Passive microwave imaging of O2 emissions using the 118.75-GHz resonance has been investigated for tropospheric and stratospheric remote sensing of atmospheric temperature and precipitation. An imaging millimeter-wave spectrometer (MTS) using eight double-sideband channels centered around the 118.75-GHz resonance, and including a fixed-beam 53.65-GHz radiometer and video camera was constructed. The MTS collected data during 33 flights of the NASA-ER-2 high-altitude aircraft in 1986 during GALE and Cohmex, yielding the first high-spatial-resolution microwave images of atmospheric O2 brightness. The isolated 118-GHz line offers higher spatial resolution and precipitation sensitivity than O2 lines in the 5-mm band near 60 GHz. The brightness temperature perturbations of clouds in nonprecipitating regions are typically twice as large in the 118-GHz channels. However, observations over cirrus anvils show that the 118-GHz brightnesses are not adversely sensitive to some optically opaque cloud cover. Thus these channels are expected to be useful for temperature sounding in the presence of clouds, although retrieval ambiguities can result from variations in the water-vapor profile and surface emissivity.

Gasiewski, A. J.↗
DOE OSTI2023

Delivering Robust Proton-Only Sensing of Hyperpolarized [1,2- 13 C 2 ]-Pyruvate Using Broad-Spectral-Range Nuclear Magnetic Resonance Pulse Sequences

Hyperpolarized [1- 13 C]pyruvate is the leading hyperpolarized injectable contrast agent and is currently under evaluation in clinical trials for molecular imaging of metabolic diseases, including cardiovascular disease and cancer. One aspect limiting broad scalability of the technique is that hyperpolarized 13 C MRI requires specialized 13 C hardware and software that are not generally available on clinical MRI scanners, which employ proton-only detection. Here, we present an approach that uses pulse sequences to transfer 13 C hyperpolarization to methyl protons for detection of the 13 C– 13 C pyruvate singlet, employing proton-only excitation and detection only. The new pulse sequences are robust to the B 1 and B 0 magnetic field inhomogeneities. The work focuses on singlet-to-magnetization (S2M) and rotor-synchronized (R) pulses, both relying on trains of hard pulses with broad spectral width coverage designed to effectively transform hyperpolarized 13 C 2 -singlet hyperpolarization to 1 H polarization on the CH 3 group of [1,2- 13 C 2 ]pyruvate. Finally, this approach may enable a broader adoption of hyperpolarized MRI as a molecular imaging technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Geologic interpretation from composited radar and Landsat imagery

Dual polarization L-band (lambda = 25 cm) radar imagery and Landsat multispectral scanner (MSS) data from central Death Valley have been computer processed and combined digitally in order to utilize the complementary information contained in multisensor data sets. Physically, like-polarized radar data gives roughness information on a scale proportional to radar wavelength. Cross-polarized data adds information on the overall roughness, particle shape, and packing density. Visible and near IR reflectivities pertain to surface chemistry. Surficial geologic units in Death Valley are defined on the basis of compositional and textural differences: optical and microwave scattering properties encoded in the multisensor image are sufficient to discriminate most of the units. This synergistic effect is most pronounced for the alluvial fans. Using radar scattering data and measured sun angle, passively-sensed (passive microwave, visible, near IR) images can be corrected for shadowing effects.

Daily, M. I.↗
NASA NTRS1994

Imager for Mars Pathfinder (IMF)

The IMP camera is a near-surface sensing experiment with many capabilities beyond those normally associated with an imager. It is fully pointable in both elevation and azimuth with a protected, stowed position looking straight down. Stereo separation is provided with two optical paths; each has a 12-position filter wheel. The primary function of the camera, strongly tied to mission success, is to take a color panorama of the surrounding terrain. IMP requires approximately 120 images to give a complete downward hemisphere from the deployed position. IMP provides the geologist, and everyone else, a view of the local morphology with millimeter-tometer-scale resolution over a broad area. In addition to the general morphology of the scale, IMP has a large compliment of specially chosen filters to aid in both the identification of the mineral types and their degree of weathering.

Smith, Peter H.↗