Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ice physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

A cloud physics radiometer

The paper describes the design features and capabilities of a seven-channel cloud physics radiometer (CPR) for remote sensing of cloud properties. The CPR channel characteristics and functions are tabulated and diagrammed. Each of the first three channels utilizes a photo-multipler detector, with the high-voltage power supply integrated with the tube into a single unit. In operation a heater is used to keep the optics temperature at or above 273 K and this temperature is constantly monitored. The last four channel detectors and filters are all cooled to the temperature of liquid nitrogen. The inclined scanning mirror rotates at a rate of 3.48 rps. Registration pulses are triggered and recorded as the mirror enters and leaves the + or -45 deg earth observation region. The ice-cloud, water cloud, snow discriminator detector has worked quite well in general. Interesting radiometer data have been obtained and their analysis is under way. The combination of the CPR and the Cloud Lidar System will make possible sophisticated remote sensing cloud studies.

Kyle, H. L.↗
NASA NTRS2017

A Method for Obtaining High Frequency, Global, IR-Based Convective Cloud Tops for Studies of the TTL

Models of varying complexity that simulate water vapor and clouds in the Tropical Tropopause Layer (TTL) show that including convection directly is essential to properly simulating the water vapor and cloud distribution. In boreal winter, for example, simulations without convection yield a water vapor distribution that is too uniform with longitude, as well as minimal cloud distributions. Two things are important for convective simulations. First, it is important to get the convective cloud top potential temperature correctly, since unrealistically high values (reaching above the cold point tropopause too frequently) will cause excessive hydration of the stratosphere. Second, one must capture the time variation as well, since hydration by convection depends on the local relative humidity (temperature), which has substantial variation on synoptic time scales in the TTL. This paper describes a method for obtaining high frequency (3-hourly) global convective cloud top distributions which can be used in trajectory models. The method uses rainfall thresholds, standard IR brightness temperatures, meteorological temperature analyses, and physically realistic and documented corrections IR brightness temperature corrections to derive cloud top altitudes and potential temperatures. The cloud top altitudes compare well with combined CLOUDSAT and CALIPSO data, both in time-averaged overall vertical and horizontal distributions and in individual cases (correlations of .65-.7). An important finding is that there is significant uncertainty (nearly .5 km) in evaluating the statistical distribution of convective cloud tops even using lidar. Deep convection whose tops are in regions of high relative humidity (such as much of the TTL), will cause clouds to form above the actual convection. It is often difficult to distinguish these clouds from the actual convective cloud due to the uncertainties of evaluating ice water content from lidar measurements. Comparison with models show that calculated cloud top altitudes are generally higher than those calculated by global analyses (e.g., MERRA). Interannual variability in the distribution of convective cloud top altitudes is also investigated.

hydration↗
NASA NTRS2012

Earth System Modeling and Field Experiments in the Arctic-Boreal Zone - Report from a NASA Workshop

Early climate modeling studies predicted that the Arctic Ocean and surrounding circumpolar land masses would heat up earlier and faster than other parts of the planet as a result of greenhouse gas-induced climate change, augmented by the sea-ice albedo feedback effect. These predictions have been largely borne out by observations over the last thirty years. However, despite constant improvement, global climate models have greater difficulty in reproducing the current climate in the Arctic than elsewhere and the scatter between projections from different climate models is much larger in the Arctic than for other regions. Biogeochemical cycle (BGC) models indicate that the warming in the Arctic-Boreal Zone (ABZ) could lead to widespread thawing of the permafrost, along with massive releases of CO2 and CH4, and large-scale changes in the vegetation cover in the ABZ. However, the uncertainties associated with these BGC model predictions are even larger than those associated with the physical climate system models used to describe climate change. These deficiencies in climate and BGC models reflect, at least in part, an incomplete understanding of the Arctic climate system and can be related to inadequate observational data or analyses of existing data. A workshop was held at NASA/GSFC, May 22-24 2012, to assess the predictive capability of the models, prioritize the critical science questions; and make recommendations regarding new field experiments needed to improve model subcomponents. This presentation will summarize the findings and recommendations of the workshop, including the need for aircraft and flux tower measurements and extension of existing in-situ measurements to improve process modeling of both the physical climate and biogeochemical cycle systems. Studies should be directly linked to remote sensing investigations with a view to scaling up the improved process models to the Earth System Model scale. Data assimilation and observing system simulation studies should be used to guide the deployment pattern and schedule for inversion studies as well. Synthesis and integration of previously funded Arctic-Boreal projects (e.g., ABLE, BOREAS, ICESCAPE, ICEBRIDGE, ARCTAS) should also be undertaken. Such an effort would include the integration of multiple remotely sensed products from the EOS satellites and other resources.

Sellers, Piers↗
NASA NTRS1980

Theoretical and experimental studies of microwave radiation from a natural snow field

The brightness temperature of a natural snow field in northern Europe was studied theortically and experimentally at 5, 12, and 37 GHz for satellite remote sensing applications. A snow model consisting of ice spheres covered by a water shell was used in calculation, taking into account scattering and absorption. The brightness temperature of a natural snow field as a function of view angle was measured from a tower in 1978 and 1979. The measured brightness temperature curves can be fitted with calculated ones by assuming reasonable values for the wetness and the particle size of snow. Experimental results also show that relatively small changes in the snow conditions cause large changes in the brightness temperature. In order to obtain a more controlled situation, experiments were continued in 1980 using a measuring site covered with aluminum sheets and determining the wetness and the particle size in addition to the density and physical temperature.

Tiuri, M.↗
NASA NTRS1993

Chemistry and evolution of gaseous circumstellar disks

An investigation of the chemical and physical processes which determine the composition and evolution of gas-rich circumstellar disks is reported. Strong mixing in a thermoclinic environment like an accretion disk leads to thermochemical disequilibration due to 'kinetic inhibition' induced by chemical time constants becoming longer than outward mixing time constants. In this case, species thermodynamically stable at high temperatures but not at low temperatures dominate at all temperatures in the disk. Nonaxisymmetric accretion of material at hypersonic speeds is a major forcing mechanism for mixing in the disk and can produce eddy speeds of 1 percent of the sound speed. The implications kinetic inhibition in the carbon, nitrogen, and anhydrous/hydrous silicate families has for the compositions of the terrestrial planets, giant planets, ice-rich satellites, Pluto, comets, meteorites, and asteroids are discussed.

Prinn, Ronald G.↗
NASA NTRS2004

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement: Materials Characterization and Analysis - Part 1

The use of foam insulation on the External Tank (ET) was necessitated by the potentially hazardous build up of ice on the vehicle prior to and during launch. This use of foam was initiated on the Saturn V rocket, which, like the Space Shuttle, used cryogenic fuel. Two major types of foam have been used on the ET. The first type is NCFI 24-124, an acreage material that is automatically sprayed on in a controlled environment. It replaced CPR 488 in 1998 and has been used since that time. The other major foams, BX-250 or BX-265, are handsprayed foams that are used to close out regions where the various sections of the ET are attached. The objectives of the present report are to study the chemistries of the various foam materials and to determine how physical and mechanical anomalies might occur during the spray and curing process. To accomplish these objectives, the report is organized as follows. First, the chemistries of the raw materials will be discussed. This will be followed by a discussion of how chemistry relates to void formation. Finally, a TGA-MS will be used to help understand the various foams and how they degrade with the evolution of chemical by-products.

Weiser, Erik S.↗
NASA NTRS2025

Large Impact Features on Ganymede and Callisto as Revealed By Geological Mapping and Morphometry

The icy Galilean satellites are host to a broad range of impact feature morphologies. Hypotheses seeking to explain the diversity of these impact features consider the effects of impact melt, the physical state of the subsurface at the time of impact, and the impactor characteristics. As part of a larger effort to assess the role of these factors in the formation and evolution of these impact features, we have performed topographic and geological mapping of 19 large impact features on Ganymede and Callisto. These are divided into two main morphological groups: craters (subdivided into pit, dome, and anomalous dome craters), and penepalimpsests/palimpsests. The transitions from pit, dome, to anomalous dome craters appear to be size-dependent up to diameters of ∼170 km. The morphologies of pit and dome craters appear to be independent of their age or geologic context. The impacts that formed them only affected a cold, rigid ice layer, with the development of pits and raised annuli on their floors possibly stemming from the evolution of a pocket of impact melt. The subdued rims and floors of anomalous dome craters indicate the increasing effect of a weak, warm ice layer on impact feature morphology with increasing size, but their prominent annuli and pits indicate that mobilization of impact melt is also a factor. The very low topographic relief of older penepalimpsests and palimpsests indicates that their impacts penetrated the ice shell to mobilize very large volumes of pre-existing liquid from a subsurface layer, with little contribution to the final feature morphology from impact melt. Penepalimpsests are distinguished from palimpsests by the higher frequency of concentric ridges within their interiors, indicating a generally more robust state of the subsurface that could better support the rotation and uplift of solid material during impact, even if a crater-like depression could not be supported. A few impact features seem to be transitional between anomalous dome craters and penepalimpsests, and the overlap of anomalous dome craters, penepalimpsests, and palimpsests in terms of diameter as well as age indicates that impactor size and subsurface properties over time are major factors in determining which of these morphologies emerges.

Oliver L White↗
NASA NTRS1991

Historical evidence for a connection between volcanic eruptions and climate change

The times of historical volcanic aerosol clouds were compared with changes in atmospheric temperatures on regional, hemispheric, and global scales. These involve either a direct comparison of individual significant eruption years with temperature records, or a comparison of eruption years with composited temperature records for several years before and after chosen sets of eruptions. Some studies have challenged the connection between individual eruptions and climate change. Mass and Portman (1989) recently suggested that the volcanic signal was present, but smaller than previously thought. In a study designed to test the idea that eruptions could cause small changes in climate, Hansen and other (1978) chose one of the best monitored eruptions at the time, the 1963 eruption of Agung volcano on the island of Bali. Using a simple radiation-balance model, in which an aerosol cloud in the tropics was simulated, this basic pattern of temperature change in the tropics and subtropics was reproduced. There may be natural limits to the atmospheric effects of any volcanic eruption. Self-limiting physical and chemical effects in eruption clouds were proposed. Model results suggest that aerosol microphysical processes of condensation and coagulation produce larger aerosols as the SO2 injection rate is increased. The key to discovering the greatest effects of volcanoes on short-term climate may be to concentrate on regional temperatures where the effects of volcanic aerosol clouds can be amplified by perturbed atmospheric circulation patterns, especially changes in mid-latitudes where meridional circulation patterns may develop. Such climatic perturbations can be detected in proxy evidence such as decreases in tree-ring widths and frost damage rings in climatically sensitive parts of the world, changes in treelines, weather anomalies such as unusually cold summers, severity of sea-ice in polar and subpolar regions, and poor grain yields and crop failures.

Rampino, Michael R.↗
NASA NTRS2011

Advancements in the Representation of Cloud-Aerosol Microphysics in the GEOS-5 AGCM

Despite numerous challenges, the physical parameterization of cloud-aerosol interactions in atmospheric GCMs has become a top priority for advancement because of our need to simulate and understand past, current, and future indirect effects of aerosols on clouds. The challenges stem from the involvement of wide range of cloud-scale dynamics and aerosol activation physical processes. Cloud dynamics modulate cloud areal extent and condensate, while aerosol activation depends on aerosol mass load, size distribution, internal mixing state, and nucleating properties, and ultimately determines cloud optical properties via particle sizes. Both macro- and micro-scale processes are obviously important for cloud-radiation interactions. We will present the main features of cloud microphysical properties in the GEOS- 5 Atmospheric GCM (AGCM) as simulated by the McRAS-AC (Microphysics of Clouds with Relaxed Arakawa-Schubert and Aerosol-Cloud interaction) scheme. McRAS-AC uses Fountoukis and Nenes (2005) aerosol activation for liquid clouds, and has an option for either Liu and Penner (2005) or Barahona and Nenes (2008, 2009) aerosol activation for ice clouds. Aerosol loading (on-line or climatological) comes from GOCART, with an assumed log-normal size distribution. Other features of McRAS-AC are level-by-level cloud-scale thermodynamics, and Seifert-Beheng (2001)-type precipitation microphysics, particularly from moist convection. Results from Single-Column Model simulations will be shown to demonstrate how cloud radiative properties, lifetimes, and precipitation are influenced by different parameterization assumptions. Corresponding fields from year-long simulations of the full AGCM will also be presented with geographical distributions of cloud effective particle sizes compared to satellite retrievals. While the primary emphasis will be on current climate, simulation results with perturbed aerosol loadings will also be shown to expose the radiative sensitivity of the microphysical parameterization.

Lee, D.↗
NASA NTRS2016

Global Ocean Evaporation Increases Since 1960 in Climate Reanalyses: How Accurate Are They?

AGCMs w/ Specified SSTs (AMIPs) GEOS-5, ERA-20CM Ensembles Incorporate best historical estimates of SST, sea ice, radiative forcing Atmospheric "weather noise" is inconsistent with specified SST. Instantaneous Sfc fluxes can be wrong sign (e.g. Indian Ocean Monsoon, high latitude oceans). Averaging over ensemble members helps isolate SST-forced signal. Reduced Observational Reanalyses: NOAA 20CR V2C, ERA-20C, JRA-55C Incorporate observed Sfc Press (20CR), Marine Winds (ERA-20C) and rawinsondes (JRA-55C) to recover much of true synoptic or weather w/o shock of new sat obs. Comprehensive Reanalyses (MERRA-2) Full suite of observational constraints- both conventional and remote sensing. But... substantial uncertainties owing to evolving satellite observing system. Multi-source Statistically Blended OAFlux, LargeYeager Blend reanalysis, satellite, and ocean buoy information. While climatological biases are removed, non-physical trends or variations in components remain. Satellite Retrievals GSSTF3, SeaFlux, HOAPS3... Global coverage. Retrieved near sfc wind speed, & humidity used with SST to drive accurate bulk aerodynamic flux estimates. Satellite inter-calibration, spacecraft pointing variations crucial. Short record ( late 1987-present). In situ Measurements ICOADS, IVAD, Res Cruises VOS and buoys offer direct measurements. Sparse data coverage (esp south of 30S. Changes in measurement techniques (e.g. shipboard anemometer height).

Climate↗
NASA NTRS2016

Managing and Servicing Physical Oceanographic Data at a NASA Distributed Active Archive Center

The NASA Earth Science Data Information Systems Project funds and operates 12 Distributed Active Archive Center(s) (DAAC) throughout the United States. Of these 12 centers, the Physical Oceanography DAAC (PO.DAAC) is committed to providing long term archival, distribution and stewardship for NASA physical oceanographic data, primarily derived from space-born satellite systems, but also including a growing set of recent and future in situ observations from the SPURS-1 and SPURS-2 campaigns. Notable NASA missions supported include: Seasat, TOPEX/Poseidon, NSCAT, QuikSCAT, ISS-RapidScat, Jason-1, Jason-2/OSTM, GRACE, Aquarius, GHRSST, and MODIS. The following interagency and international missions are also supported by PO.DAAC: AVHRR, Coriolis, DMSP, MetOp-A, MetOp-B, Oceansat-2. The PO.DAAC currently holds 525 datasets in public distribution, spanning the following observational parameters: sea surface temperature, sea surface salinity, ocean color, ocean surface currents, ocean surface wind speed, ocean surface wind direction, sea surface height, significant wave height, ocean water mass/thickness, and sea ice age. A hundred of these datasets are available in near-real-time. Datasets are distributed through a variety of open-source access protocols including FTP, OPeNDAP, and THREDDS. FTP will soon be phased out in favor of a recently introduced HTTPS PO.DAAC Drive interface that supports WebDAV and interoperable machine-to-machine communication. OPeNDAP supports remote data/metadata query, subset, and download. THREDDS provides the features of OPeNDAP with the additional feature of temporal aggregation. PO.DAAC also offers proprietary tools and services to further enhance the data discovery, visualization and analysis experience, including but not limited to: State of the Ocean, Web Services (data/metadata discovery and extraction), HiTIDE Level-2 subsetter, Live Access Server (LAS), Webification (w10nsci), and Rich Site Summary (RSS) Datacasting. To assist with provenance of datasets, PO.DAAC has implemented DOIs for the data it distributes so that they can be properly cited. There is a user forum and helpdesk that contains data recipes and via which users can get guidance. In summary, this presentation aims to provide a general overview of PO.DAAC’s web portal and data holdings along with a set of illustrative examples leading prospective data users into the practical utility of its tools and services.

Moroni, David F.↗
NASA NTRS1993

Abrupt climate change and transient climates during the Paleogene: a marine perspective

Detailed investigations of high latitude sequences recently collected by the Ocean Drilling Program (ODP) indicate that periods of rapid climate change often culminated in brief transient climates, with more extreme conditions than subsequent long term climates. Two examples of such events have been identified in the Paleogene; the first in latest Paleocene time in the middle of a warming trend that began several million years earlier: the second in earliest Oligocene time near the end of a Middle Eocene to Late Oligocene global cooling trend. Superimposed on the earlier event was a sudden and extreme warming of both high latitude sea surface and deep ocean waters. Imbedded in the latter transition was an abrupt decline in high latitude temperatures and the brief appearance of a full size continental ice-sheet on Antarctica. In both cases the climate extremes were not stable, lasting for less than a few hundred thousand years, indicating a temporary or transient climate state. Geochemical and sedimentological evidence suggest that both Paleogene climate events were accompanied by reorganizations in ocean circulation, and major perturbations in marine productivity and the global carbon cycle. The Paleocene-Eocene thermal maximum was marked by reduced oceanic turnover and decreases in global delta 13C and in marine productivity, while the Early Oligocene glacial maximum was accompanied by intensification of deep ocean circulation and elevated delta 13C and productivity. It has been suggested that sudden changes in climate and/or ocean circulation might occur as a result of gradual forcing as certain physical thresholds are exceeded. We investigate the possibility that sudden reorganizations in ocean and/or atmosphere circulation during these abrupt transitions generated short-term positive feedbacks that briefly sustained these transient climatic states.

NASA Program Exobiology↗
NASA NTRSDate not supplied

Advances in Design Capabilities for Planetary Missions from the NASA Entry Systems Modeling and Instrumentation Portfolio

The Entry Systems Modeling project (ESM) is supported by both the NASA Space Technology and the Science Mission Directorates and focuses on developing simulation tools and validated models for characterizing the performance of entry systems tailored to planetary destinations across the Solar System. ESM is organized into six technical capability areas that together address all relevant factors related to spacecraft entry, as well as some aspects of descent: Thermal Protection System (TPS) Materials; Aerothermodynamics; Entry & Descent Vehicle Dynamics; Guidance, Navigation, and Control; Vehicle Systems Analysis; and Advanced Tools and Numerical Methods. Development within the capability areas is undertaken explicitly with a focus on transition and infusion to science missions, human exploration missions, and commercial space activities. The present talk details developments that specifically impact science missions, including simulation tool capabilities that aid in mission design and model development to understand entry system performance at a given destination. Examples of the successful infusion and transition of such project outcomes to science missions also are provided. Several simulation tool development efforts within ESM have resulted in new design capabilities for missions. One such outcome is improved toolsets for mission trajectory and concept of operations design. Specifically, an initiative to couple a leading tool for entry, ascent/descent, and orbital trajectory optimization (Program to Optimize Simulated Trajectories II or POST2) to those used within the Agency for interplanetary trajectory optimization (Copernicus and Monte) has made substantial progress, with the outcomes to date promising to allow efficient trajectory optimization across mission phases. Additionally, toolchains for the evaluation of vehicle performance during entry and descent have been developed that allow assessment of multi-dimensional aeroheating on detailed vehicle geometries, characterization of deployment and inflation of parachutes, and assessment of vehicle dynamic stability during descent. These capabilities are achieved by coupling diverse sets of physics together – material response, computational fluid dynamics, radiation, and vehicle dynamics – to suitably describe complex entry and descent phenomena. Several model development and validation efforts for specific destinations and entry regimes also are underway within the ESM project. For instance, new experimental capabilities to validate radiation models at low densities/high altitudes recently have been established with project support, specifically the Low-Density Shock Tube (LDST) at the NASA Ames Research Center Electric Arc Shock Tube (EAST) facility. The LDST is being leveraged to develop improved models of shock layer kinetics and radiation in Titan atmospheres, while future studies will be conducted in the LDST and the existing high velocity shock tube to provide validation data for radiation models of Venus, Ice Giants, and Mars atmospheres. Models describing the aerothermal and thermo-structural performance of Thermal Protection System (TPS) materials has been another focus, with multiscale modeling activities on-going for the two leading TPS materials applicable to a range of entry conditions and science missions: the Phenolic-Impregnated Carbon Ablator (PICA) and woven materials like 3D Mid-Density Carbon Phenolic (3MDCP). A continual effort is made to infuse and transition outcomes from ESM simulation tool and model development activities into relevant science missions. Significant progress has been made on this front, with missions such as Dragonfly, DAVINCI, and Mars Missions benefitting from project outcomes. The groundwork also is being laid to provide insights into forward looking missions to Gas/Ice Giants as well as for potential sample returns.

Justin Haskins↗
NASA NTRS1993

LRAT: Lightning Radiative Transfer

In this report, we extend to cloud physics the work done for single and multiple scattering of electromagnetic waves. We consider the scattering of light, visible or infrared, by a spherical cloud represented by a statistically homogeneous ensemble of configurations of N identical spherical water droplets whose centers are uniformly distributed in its volume V. The ensemble is specified by the average number rho of scatterers in unit volume and by rho f(R) with f(R) as the distribution function for separations R of pairs. The incident light, vector-phi(sub 0) a plane electromagnetic wave with harmonic time dependence, is from outside the cloud. The propagation parameter kappa(sub 0) and the index of refraction eta(sub 0) determine physically the medium outside the distribution of scatterers. We solve the interior problem separately to obtain the bulk parameters for the scatterer equivalent to the ensemble of spherical droplets. With the interior solution or the equivalent medium approach, the multiple scattering problem is reduced to that of an equivalent single scatterer excited from outside illumination. A dispersion relation which determines the bulk propagation parameter K and the bulk index of refraction eta of the cloud is given in terms of the vector equivalent scattering amplitude vector-G and the dyadic scattering amplitude tilde-g of the single object in isolation. Based on this transfer model we will have the ability to consider clouds composed of inhomogeneous distribution of water and/or ice particles and we will be able to take into account particle size distributions within the cloud. We will also be able to study the effects of cloud composition (i.e., particle shape, size, composition, orientation, location) on the polarization of the single or the multiple scattered waves. Finally, this study will provide a new starting point for studying the problem of lightning radiative transfer.

Phanord, Dieudonne D.↗
NASA NTRSDate not supplied

Spatiotemporal Methane Emissions from Global Lakes and Reservoirs

Inland aquatic systems, such as lakes and reservoirs, contribute substantially to global methane (CH4) emissions; yet are among the most uncertain components of the total CH4 budget. Lakes and reservoirs have received recent attention as they may generate high CH4 fluxes. Improved quantification of these CH4 fluxes, particularly their spatiotemporal distribution, is key to realistically incorporating them in CH4 modeling and budget studies. Here we report on a new global, gridded (0.25° lat × 0.25° lon) study of lake and reservoir CH4 emissions, accounting for new knowledge regarding lake and reservoir areal extent and distribution, and spatiotemporal emission patterns influenced by diurnal variability, temperature-dependent seasonality, satellite-derived freeze-thaw dynamics, and eco-climatic and physical CH4-centric type classification. The results of this new data set comprise daily CH4 emissions from lake and reservoirs throughout the full annual cycle and are tightly anchored to field observations, in situ measurements, and remote-sensing observations. Results show that reservoirs cover 297 × 103 km2 globally and emit 10.1 Tg CH4 yr-1 from diffusive (1.2 Tg CH4 yr-1) and ebullitive (8.9 Tg CH4 yr-1) emission pathways. On a global scale, CH4 emitting areas of lakes cover 1853 × 103 km2 and emit 37.1 Tg CH4 yr-1 from diffusive (17.1 Tg CH4 yr-1) and ebullitive (23.0 Tg CH4 yr-1) emission pathways and an additional ebullition flux of 5.2 Tg CH4 yr-1 upon ice-melt due to the accumulation of bubbles during the freeze period. This analysis of lakes and reservoir CH4 emission addresses multiple gaps and uncertainties in previous studies and represents an important contribution to studies of the global CH4 budget. The new data sets and methodologies from this study provide a framework to better understand and model the current and future role of lakes and reservoirs in the global CH4 budget and to guide efforts to mitigate inland aquatic system CH4 emissions. This presentation will describe the methodologies applied and the major results of this study focusing on the spatiotemporal distribution of lake and reservoir type classification, processes driving lake and reservoir emission seasonality, and the contribution of individual lake and reservoir types to the annual cycle of inland aquatic CH4 emissions.

Spatiotemporal↗
NASA NTRS1975

Consideration of probability of bacterial growth for Jovian planets and their satellites

Environmental parameters affecting growth of bacteria (e.g., moisture, temperature, pH, and chemical composition) were compared with current atmospheric models for Jupiter and Saturn, and with the available physical data for their satellites. Different zones of relative probability of growth were identified for Jupiter and Saturn, with the highest in pressure regions of 1-10 million N/sq m (10 to 100 atmospheres) and 3-30 million N/sq m (30 to 300 atmospheres), respectively. Of the more than two dozen satellites, only the largest (Io, Europa, Ganymede, Callisto, and Titan) were found to be interesting biologically. Titan's atmosphere may produce a substantial greenhouse effect providing increased surface temperatures. Models predicting a dense atmosphere are compatible with microbial growth for a range of pressures at Titan's surface. For Titan's surface the probability of growth would be enhanced if (1) the surface is entirely or partially liquid (water), (2) volcanism (in an ice-water-steam system) is present, or (3) access to internal heat sources is significant.

Taylor, D. M.↗
NASA NTRS1999

Physical and Chemical Study of Minerals and Rocks Containing Low-Z Compounds of Interest to Astrobiology and Origin of Life

Understanding the origins of Life requires a good understanding of the physics and chemistry of biogenic low-z elements H, C, N, O, P, S in terrestrial environments, on Mars, on extraterrestrial bodies such as meteorite parent bodies and comets, and in interstellar space. In this Proposal five Tasks form a coherent program aimed at elucidating various aspects of low-z element geo- and cosmochemistry with special reference to the origin of Life on Earth and to the search for life on Mars, extant or extinct. (i) Formation of organic molecules, in particular oxygenated H-C-0 molecules or precursors thereof of the composition H(x)C(y)O(z)(n-), inside the hard matrix of structurally dense magmatic minerals; (ii) Formation of organic molecules inside the soft matrix of amorphous and crystalline water ice; (iii) Preservation of organic molecules in cherts and other siliceous rocks formed in hot spring or submarine hydrothermal vent environments; (iv) The nature of the elusive Martian soil oxidant; and (v) Prototype development of an XRD instrument, using a new patented XRD camera concept that utilizes a Charge Coupled Device (CCD) as a camera and as a energy-dispersive analyzer.

Source record↗
NASA NTRS2017

Mineralogy of Rock Flour in Glaciated Volcanic Terrains: An Analog for a Cold and Icy Early Mars

Geomorphological and mineralogical data from early Martian surfaces indicate liquid water was present on ancient Mars. The relative surface temperatures, however, remain a subject of debate. Was early Mars warm and wet or cold and icy with punctuated periods of warmth and ice melt? By characterizing the mineralogy and geochemistry of modern icy mafic terrains on Earth, we can search for these characteristics in early Martian terrains to better constrain the early Martian climate. Here, we describe the mineralogy of glacial flour in a modern glaciated volcanic terrain in Oregon, USA. We are particularly interested in secondary phases that form in these environments, and we hypothesize that poorly crystalline phases may preferentially form in these terrains because of the low temperatures and the seasonality of melt water production. A description of the mineralogy of the moraines, the composition of the amorphous materials, and the geochemistry of the glacial melt waters are presented elsewhere. Glacial flour is made up of silt- and clay-sized particles that form from the physical weathering of rock underlying a wet-based glacier as the glacier slides over it. Flour is usually transported from underneath a glacier by melt water streams. The geochemistry of glacial melt water streams has been studied extensively and has been used to infer weathering reactions within glacial systems. However, the mineralogy of these environments, especially on mafic volcanic terrains, is not well studied. Rock flour is a ubiquitous physical weathering product in glaciated terrains and, therefore, affects microbial habitats, stream and lake chemistry, and chemical weathering processes. and by studying the mineralogy of glacial flour, we can better understand geochemical and microbiological processes in subglacial and proglacial terrains.

Rampe, E. B.↗