SEARCH · Engineering Papers

Results for “hypersonic flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Results of test MA22 in the NASA/LaRC 31-inch CFHT on an 0.010-scale model (32-0) of the space shuttle configuration 3 to determine RCS jet flow field interaction, volume 1

A wind tunnel test was conducted in the Langley Research Center 31-inch Continuous Flow Hypersonic Wind Tunnel from May 6, 1975 through June 3, 1975. The primary objectives of this test were the following: (1) to study the ability of the wind tunnel to repeat, on a run-to-run basis, data taken for identical configurations to determine if errors in repeatability could have a significant effect on jet interaction data, (2) to determine the effect of aerodynamic heating of the scale model on jet interaction, (3) to investigate the effects of elevon and body flap deflections on jet interaction, (4) to determine if the effects from jets fired separately along different axes can be added to equal the effects of the jets fired simultaneously (super position effects), (5) to study multiple jet effects, and (6) to investigate area ratio effects, i.e., the effect on jet interaction measurements of using wind tunnel nozzles with different area ratios in the same location. The model used in the test was a .010-scale model of the Space Shuttle Orbiter Configuration 3. The test was conducted at Mach 10.3 and a dynamic pressure of 150 psf. RCS chamber pressure was varied to simulate free flight dynamic pressures of 5, 7.5, 10, and 20 psf.

Kanipe, D. B.↗

NASA NTRS1976

Performance of a mullite reusable surface insulation system in a hypersonic stream

The thermal and structural performance of a large panel of mullite reusable surface insulation (RSI) tiles was determined by a series of aerothermal tests in the Langley 8-foot high-temperature structures tunnel. The test panel was designed to represent a portion of the surface structure on a space shuttle orbiter fuselage along a 1,150 K isotherm with the mullite tile system bonded directly to the primary structure. Aerothermal tests were conducted at a free-stream Mach number of 6.7, a total temperature of 1,880 K, a unit Reynolds number of 4.6 million per meter, and dynamic pressure of 62 kPa. The thermal response of the mullite tile was as predicted, and the bond-line temperature did not exceed the design level of 570 K during a typical entry-heat cycle. Geometric irregularities of the tile gaps affected the tile edge temperatures when exposed to hypersonic flow. The tile coating demonstrated good toughness to particle impacts, but the coating cracked and flaked with thermal cycles. The gap filler of woven silica fibers appeared to hinder flow penetration into the gaps and withstood the flow shear of the present tests.

Hunt, L. R.↗

NASA NTRS1979

Some recent developments in the prediction of shock interaction phenomena at hypersonic speeds

The shock strengths for which either Edney type I or type II shock interference patterns can occur when two oblique shocks of opposite families intersect were determined graphically at Mach 10 by using logarithmic shock polar diagrams. The theoretical region of overlap for the two types of interaction was investigated by observing in the Schlieren system of the Langley 15-inch hypersonic flow apparatus the intersection of oblique shocks generated by two sharp 10 degree wedges as the wedge angles of attack and their relative positions were altered. A range of shock strengths for which either of the two interference patterns can exist was demonstrated.

Crawford, D. H.↗

NASA NTRS1982

Numerical Solution for Navier-Stokes Equations

Carefully selected blend of computational techniques solves complete set of equations for viscous, unsteady, hypersonic flow in general curvilinear coordinates. New algorithm has tested computation of axially directed flow about blunt body having shape similar to that of such practical bodies as wide-body aircraft or artillery shells. Method offers significant computational advantages because of conservation-law form of equations and because it reduces amount of metric data required.

Warsi, Z. U. A.↗

NASA NTRS1981

Ceramic and coating applications in the hostile environment of a high temperature hypersonic wind tunnel

A Mach 7, blowdown wind tunnel was used to investigate aerothermal structural phenomena on large to full scale high speed vehicle components. The high energy test medium, which provided a true temperature simulation of hypersonic flow at 24 to 40 km altitude, was generated by the combustion of methane with air at high pressures. Since the wind tunnel, as well as the models, must be protected from thermally induced damage, ceramics and coatings were used extensively. Coatings were used both to protect various wind tunnel components and to improve the quality of the test stream. Planned modifications for the wind tunnel included more extensive use of ceramics in order to minimize the number of active cooling systems and thus minimize the inherent operational unreliability and cost that accompanies such systems. Use of nonintrusive data acquisition techniques, such as infrared radiometry, allowed more widespread use of ceramics for models to be tested in high energy wind tunnels.

Puster, R. L.↗

NASA NTRS1982

A hot-film static-pressure probe

The procedure described involves calibrating the probe in the gas of interest over the range of temperatures and pressures anticipated in the wind-tunnel tests and then applying the calibration to reduce the data from those tests. Pressure readings from two probes, one having two hot-film sensors and an internal sonic orifice and the other connected to a conventional pressure gage, are recorded for several Reynolds numbers and compared. The conventional static-pressure probe with a pair of hot-film sensors and an interior sonic orifice is shown to provide the means of surveying flowfields in hypersonic flow at a rapid rate and with an accuracy of better than + or - 10%.

Ashby, G. C., Jr.↗

NASA NTRS1982

Development and application of the GIM code for the Cyber 203 computer

The GIM computer code for fluid dynamics research was developed. Enhancement of the computer code, implicit algorithm development, turbulence model implementation, chemistry model development, interactive input module coding and wing/body flowfield computation are described. The GIM quasi-parabolic code development was completed, and the code used to compute a number of example cases. Turbulence models, algebraic and differential equations, were added to the basic viscous code. An equilibrium reacting chemistry model and implicit finite difference scheme were also added. Development was completed on the interactive module for generating the input data for GIM. Solutions for inviscid hypersonic flow over a wing/body configuration are also presented.

Stainaker, J. F.↗

NASA NTRS1983

Analysis of aerothermal loads on spherical dome protuberances

Hypersonic flow over spherical dome protuberances was investigated to determine increased pressure and heating loads to the surface. The configuration was mathematically modeled in a time-dependent three-dimensional analysis of the conservation of mass, momentum (Navier-Stokes), and energy equations. A boundary mapping technique was used to obtain a rectangular parallelepiped computational domain, a MacCormack explicit time-split predictor-corrector finite difference algorithm was used to obtain solutions. Results show local pressures and heating rates for domes one-half, one, and two boundary layer thicknesses high were increased by factors on the order of 1.4, 2, and 6, respectively. Flow over the lower dome was everywhere attached while flow over the intermediate dome had small windward and leeside separations. The higher dome had an unsteady windward separation region and a large leeside separation region. Trailing vortices form on all domes with intensity increasing with dome height. Discussion of applying the results to a thermally bowed thermal protection system are presented.

Olsen, G. C.↗

NASA NTRS1982

Chemical systematics among the moldavite tektites

The compositional variations that occur among the moldavite tektites are caused principally by incomplete mixing of two components during fusion. With the possible exception of silica, there is no evidence for significant losses of volatile species by fractional vaporization. Chemical constraints have been calculated for the two source-materials that contributed to the moldavites. If these tektites were formed by impact fusion, as is commonly believed, then the compositional systematics preserved within the moldavites suggest that hypersonic flow and ejection of impact melts are orderly processes. Insights gained from the study of tektites should prove useful in interpreting the chemistries of impact glasses from other bodies in the solar system.

Delano, J. W.↗

NASA NTRS1983

Analysis of aerothermal loads on spherical dome protuberances

Hypersonic flow over spherical dome protuberances was investigated to determine increased pressure and heating loads to the surface. The configuration was mathematically modeled in a time-dependant three-dimensional analysis of the conservation of mass, momentum (Navier-Stokes), and energy equations. A boundary mapping techique was used to obtain a rectangular parallelepiped computational domain, and a MacCormack explicit time-split predictor-corrector finite difference algorithm was used to obtain solutions. Results show local pressures and heating rates for domes one-half, one, and two boundary layer thicknesses high were increased by factors on the order of 1.4, 2, and 6, respectively. However, because lee-side pressure and thermal loads were reduced the two lower height domes did not experience any net increase in total loads. The total loads on the higher dome were increased by twenty-five percent. Flow over the lower dome was everywhere attached while flow over the intermediate dome had small windward and leeside separations. The higher dome had an unsteady windward separation region and a large leeside separation region. Trailing vortices form on all domes with intensity increasing with dome height. Discussions of applying the results to a thermally bowed thermal protection system are presented.

Olsen, G. C.↗

NASA NTRS1983

Application of the implicit MacCormack scheme to the PNS equations

The two-dimensional parabolized Navier-Stokes equations are solved using MacCormack's (1981) implicit finite-difference scheme. It is shown that this method for solving the parabolized Navier-Stokes equations does not require the inversion of block tridiagonal systems of algebraic equations and allows the original explicit scheme to be employed in those regions where implicit treatment is not needed. The finite-difference algorithm is discussed and the computational results for two laminar test cases are presented. Results obtained using this method for the case of a flat plate boundary layer are compared with those obtained using the conventional Beam-Warming scheme, as well as those obtained from a boundary layer code. The computed results for a more severe test of the method, the hypersonic flow past a 15 deg compression corner, are found to compare favorably with experiment and a numerical solution of the complete Navier-Stokes equations.

Lawrence, S. L.↗

NASA NTRS1984

An experimental investigation of surface pressure measurements on an advanced winged entry vehicle at Mach 10

Surface pressure measurements have been made at Mach 10 in air on an instrumented 0.006-scale model of an advanced (control configured) winged entry vehicle. The tests were conducted in the Langley Continuous Flow Hypersonic Tunnel. Data were obtained at 83 surface pressure stations, which include locations on the lower and upper surface centerlines, spanwise positions along the lower and upper surfaces of the wing, the lower surface of the body flap, and radial locations on the fuselage. Data were obtained for angles of attack ranging from zero to 40 deg, sideslip angles of -2 deg to +5 deg, Reynolds numbers of 0.5, 1.0, and 2.0 million per foot, and body-flap deflections of zero, 10, and 20 deg. Test conditions and orifice locations were chosen to correspond directly with those for the heat transfer measurements previously reported on the same configuration. Comparison of windward symmetry plane data with predictions based upon an approximate engineering method was found to yield reasonable agreement for angles of attack from 20 to 40 deg. The leeward surface pressure data were observed to be roughly an order of magnitude lower than the corresponding windward data. At low angles of attack, regions of high pressure were noted on the windward wing surface. The result is attributed to vortical action or shock impingement. High pressures were also measured on the deflected body flap, a critical region for this type of vehicle. Reynolds number effects were found to be insignificant.

Wurster, K. E.↗

NASA NTRS1985

Transient motion of hypersonic vehicles including time history effects

An analytic method is developed for calculating the transient pitching motion of a wedge in hypersonic flow, taking into account fully the interaction between its motion and the unsteady air flow passing it. The effects of past motion history on the present state of motion are shown to be caused by the wave reflection from the bow shock. In the Newtonian limit they are equivalent to that of an added moment of inertia. The time history effects generally tend to decrease the damping, rendering the oscillatory motion more persistent. Numerical examples are given.

Hui, W. H.↗

NASA NTRS1985

Design and performance analysis of an aero-maneuvering orbital-transfer vehicle concept

Systems requirements for design-optimized, lateral-turn performance were determined for reusable, space-based applications and low-Earth orbits involving large multiple plane-inclination changes. The aerothermodynamic analysis is the most advanced available for rarefield-hypersonic flow over lifting surfaces at incidence. The effects of leading-edge bluntness, low-density viscous phenomena, and finite-rate flow-field chemistry and surface catalysis are accounted for. The predicted aerothermal heating characteristics are correlated with thermal-control and flight-performance capabilities. The mission payload capacity for delivery, retrieval, and combined operations was determined for round-trip sorties extending to polar orbits. Recommendations are given for future design refinements. The results help to identify technology issues required to develop prototype operational vehicles.

Menees, G. P.↗

NASA NTRS1985

Design and performance analysis of an aeromaneuvering orbital-transfer vehicle concept

Systems requirements for design-optimized, lateral-turn performance were determined for reusable, space-based applications and low-earth orbits involving large multiple plane-inclination changes. The aerothermodynamic analysis is the most advanced available for rarefied-hypersonic flow over lifting surfaces at incidence. The effects of leading-edge bluntness, low-density viscous phenomena, and finite-rate flow-field chemistry and surface catalysis are accounted for. The predicted aerothermal heating characteristics are correlated with thermal-control and flight-performance capabilities. The mission payload capacity for delivery, retrieval, and combined operations was determined for round-trip sorties extending to polar orbits. Recommendations are given for future design refinements. The results help to identify technology issues required to develop prototype operational vehicles.

Menees, G. P.↗

NASA NTRS1987

Study of non-equilibrium transport phenomena

Nonequilibrium phenomena due to real gas effects are very important features of low density hypersonic flows. The shock shape and emitted nonequilibrium radiation are identified as the bulk flow behavior parameters which are very sensitive to the nonequilibrium phenomena. These parameters can be measured in shock tubes, shock tunnels, and ballistic ranges and used to test the accuracy of computational fluid dynamic (CFD) codes. Since the CDF codes, by necessity, are based on multi-temperature models, it is also desirable to measure various temperatures, most importantly, the vibrational temperature. The CFD codes would require high temperature rate constants, which are not available at present. Experiments conducted at the NASA Electric Arc-driven Shock Tube (EAST) facility reveal that radiation from steel contaminants overwhelm the radiation from the test gas. For the measurement of radiation and the chemical parameters, further investigation and then appropriate modifications of the EAST facility are required.

Sharma, Surendra P.↗

NASA NTRS1987

Computational fluid dynamics near the continuum limit

Two dimensional Navier-Stokes equations for a perfect gas are solved for hypersonic flow over a flat plate at Reynolds numbers ranging from continuum to the free molecule flow. In the transition flow regime, new slip boundary conditions are introduced, which reduce to the well-known slip conditions of Maxwell at small Knudsen numbers and yield the correct shear stress and heat transfer in the limiting case of free molecule flow. Comparison of the computed results with the existing experimental data and Monte Carlo calculations indicates that the continuum Navier-Stokes equations give surprisingly realistic results throughout the transition flow regime, when the new slip boundary conditions are used.

Maccormack, Robert W.↗

NASA NTRS1987

Direct simulation of aerothermal loads for an aeroassist flight experiment vehicle

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the hypersonic flow about an elliptically blunted cone. The flow conditions are those for a proposed Aeroassist Flight Experiment (AFE) vehicle. The altitude range considered is that from 130 to 90 km which encompasses most of the transitional flow regime for the AFE vehicle, that is, the region bounded by free molecular and continuum flow. Freestream velocities of 9.9 to 7.5 km/sec are considered. The numerical simulations show that noncontinuum effects are evident for all cases considered. The onset of chemical dissociation occurs at a simulated altitude of about 130 km. Results presented highlight the thermal and chemical nonequilibrium nature of the flowfield and the impact of these effects on the surface heating and body drag. A calculation which included the additional effects of ionization and thermal radiation demonstrates that the inclusion of such efects would not significantly alter the surface quantities calculated in the present study. The radiative heating is negligible when compared with the convective heating, and the same would be true for the other conditions considered.

Dogra, Virendra K.↗