Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “growth processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Ultrafine particles formed by heating droplets of simulated ash containing metals

Coal and biomass combustion and waste incineration produce inorganic aerosol, whose ultrafine fraction is hypothesized to be generated mainly by metal vaporization and subsequent nucleation and growth in a high-temperature atmosphere. To investigate this mechanism, we investigated nanoparticle inception and early growth processes at high temperature by spraying monodisperse droplets of simulated ash containing metals in the centerline of a laboratory ethylene/air laminar premixed flame at stoichiometric conditions. Particles were collected by thermophoresis on mica substrates for atomic force microscopy dimensional and morphological analysis. Chemical nature, volume fraction, and mean diameter of particles were evaluated by in situ UV-Vis broadband light absorption and laser light-scattering measurements. We also measured size distribution of material sampled from the flame without dilution using differential mobility analysis and scanning electron microscopy. Energy dispersive X-ray spectroscopy provided further information on the chemical composition of particles deposited on substrates. Size distributions showed that the flame-generated aerosol have a high number concentration, are mostly smaller than 10 nm, and persist far downstream of the droplet injection point. Preliminary results showed that the coagulation rate of those nanoparticles is much slower than their collision rate, which implies that their lifetime may be long and may represent a severe problem for environmental pollution.

01 COAL, LIGNITE, AND PEAT↗

Atomic layer deposition-based functionalization of materials for medical and environmental health applications

Nanoporous alumina membranes exhibit high pore densities, well-controlled and uniform pore sizes, as well as straight pores. Owing to these unusual properties, nanoporous alumina membranes are currently being considered for use in implantable sensor membranes and water purification membranes. Atomic layer deposition is a thin-film growth process that may be used to modify the pore size in a nanoporous alumina membrane while retaining a narrow pore distribution. In addition, films deposited by means of atomic layer deposition may impart improved biological functionality to nanoporous alumina membranes. In this study, zinc oxide coatings and platinum coatings were deposited on nanoporous alumina membranes by means of atomic layer deposition. PEGylated nanoporous alumina membranes were prepared by self-assembly of 1-mercaptoundec-11-yl hexa(ethylene glycol) on platinum-coated nanoporous alumina membranes. The pores of the PEGylated nanoporous alumina membranes remained free of fouling after exposure to human platelet-rich plasma; protein adsorption, fibrin networks and platelet aggregation were not observed on the coated membrane surface. Zinc oxide-coated nanoporous alumina membranes demonstrated activity against two waterborne pathogens, Escherichia coli and Staphylococcus aureus. The results of this work indicate that nanoporous alumina membranes may be modified using atomic layer deposition for use in a variety of medical and environmental health applications.

antimicrobial↗

Predictive Control over Charge Density in the Two-Dimensional Electron Gas at the Polar-Nonpolar NdTiO 3 / SrTiO 3 Interface

Through systematic control of the Nd concentration, we show that the carrier density of the twodimensional electron gas (2DEG) in SrTiO3=NdTiO3=SrTiO3 ð001Þ can be modulated over a wide range. We also demonstrate that the NdTiO3 in heterojunctions without a SrTiO3 cap is degraded by oxygen absorption from air, resulting in the immobilization of donor electrons that could otherwise contribute to the 2DEG. This system is, thus, an ideal model to understand and control the insulator-to-metal transition in a 2DEG based on both environmental conditions and film-growth processing parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Competing magnetic phases in Cr 3+𝛿 ⁢Te 4 are spatially segregated

Cr 1+𝑥⁢ Te 2 is a self-intercalated van der Waals system that is of current interest for its room-temperature room-temperature ferromagnetic (FM) phases and tunable topological properties. In bulk samples, the strain from the interstitial Cr ions leads to distinct structural phases for different ranges of 𝑥. Early neutron powder diffraction (NPD) measurements on the monoclinic phase Cr 3 ⁢Te 4 (𝑥=0.5) presented evidence for competing FM and antiferromagnetic (AFM) phases. Here we apply neutron diffraction to a single crystal of Cr 3+𝛿 ⁢Te 4 with 𝛿=−0.10 and discover that it consists of two distinct monoclinic phases, one with FM order below 𝑇 C ≈321 K and another that develops AFM order below 𝑇 N ≈86 K. In contrast, we find that a crystal with 𝛿=−0.26 exhibits only FM order below 𝑇 C ≈285 K. The single-crystal analysis is complemented by results obtained with NPD, x-ray powder diffraction, and transmission electron microscopy (TEM) measurements on the 𝛿=−0.10 composition. From observations of spontaneous magnetostriction of opposite sign at 𝑇 C and 𝑇 N , along with the TEM evidence for both monoclinic phases in a single thin ( ≈100 nm) grain, we conclude that the two phases must have a fine-grained ( ≲100 nm) intergrowth character, as might occur from high-temperature spinodal decomposition during the growth process. Calculations of the relaxed lattice structures for the FM and AFM phases with density functional theory provide a rationalization of the observed spontaneous magnetostrictions. Correlations between the magnitude and orientation of the magnetic moments with lattice parameter variation demonstrate that the magnetic orders are sensitive to strain, thus explaining why magnetic ordering temperatures and anisotropies can be different between bulk and thin-film samples, when the latter are subject to epitaxial strain. Our results point to the need to investigate the supposed coexistence FM and AFM phases reported elsewhere in the Cr 1+𝑥 ⁢Te 2 system, such as in the Cr 5 ⁢Te 8 phase (𝑥=0.25).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bandgap and Carrier Transport Engineering of Quantum Confined Mixed Phase Nanocrystalline/Amorphous Silicon

Mixed phase nanocrystalline/amorphous-silicon (nc/a-Si:H) thin films with band-gap higher than bulk silicon are prepared by depositing silicon nanoparticles (SiNPs), prepared in a separate deposition zone, and hydrogenated amorphous silicon (a-Si:H), simultaneously. Since the two deposition phases are well decoupled, optimized parameters for each component can apply to the growth process. Photoluminescence spectroscopy (PL) shows that the embedded SiNPs are small enough to exhibit quantum confinement effects. The low temperature PL measurements on the mixed phase reveal a dominant emission feature, which is associated with SiNPs surrounded by a-Si:H. In addition, we compare time dependent low temperature PL measurements for both a-Si:H and mixed phase material under intensive laser exposure for various times up to two hours. The PL intensity of a-Si:H with embedded SiNPs degrades much less than that of pure a-Si:H. We propose this improvement of photostability occurs because carriers generated in the a-Si:H matrix quickly transfer into SiNPs and recombine there instead of recombining in a-Si:H and creating defect states (Staebler-Wronski Effect).

14 SOLAR ENERGY↗

Structural and Kinetic Analysis of BaCl 2 Nanocrystals in Fluorochlorozirconate Glass-Ceramics

The presence of BaCl2 nanocrystals and the crystallographic phase that they adopt controls the optical behavior of fluorochlorozirconate glass-ceramics. We have used in situ X-ray diffraction heating experiments and ex situ transmission electron microscopy to follow the BaCl2 nanocrystal nucleation and growth processes as a function of heating rate and isothermal hold temperature. The BaCl2 nanocrystals nucleate with the hexagonal crystal structure and grow as spherical particles to a size of similar to 10 to 20nm. They then undergo a structural transformation to the orthorhombic phase and their shape changes to rounded disks, with diameters ranging from 150 to 250nm, and thicknesses ranging from 80 to 120nm. The change in size results from Ostwald ripening of the hexagonal BaCl2 nanocrystals to form the orthorhombic BaCl2 nanocrystals.

Alvarez, Carlos J.↗

Study of plasma dynamics in a modulated pulsed power magnetron discharge using a time-resolved Langmuir probe

Modulated pulse power (MPP) technology is a derivative of high power pulsed magnetron sputtering that allows unprecedented user control over the growth process, although the critical time-dependent plasma properties during the power pulse have not been studied until now. Using a MPP plasma generator, pulses of custom voltage waveforms were generated and applied to the cathode of a 36 cm diameter circular planar magnetron. The I-V characteristics of the pulses are separable into distinct discharge stages. A time-resolved triple Langmuir probe was introduced to measure the temporal evolution of the plasma. Typical electron density of 5x10{sup 17} m{sup -3} and electron temperature of 10 eV during the pulse were calculated from measured parameters. Plasma behaviors were observed to closely depend on the pulse waveforms. Various parameters, including pulse current, pulse frequency, pressure, and distance from the target, also affected the electron density and temperature, providing degrees of freedom to optimize the sputtering processes. The effects of each parameter on the pulsed plasma dynamics are discussed and then attributed to mechanisms of electron impact ionization, gas heating, and magnetic confinement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Initial stages of growth and the influence of temperature during chemical vapor deposition of sp{sup 2}-BN films

Knowledge of the structural evolution of thin films, starting by the initial stages of growth, is important to control the quality and properties of the film. The authors present a study on the initial stages of growth and the temperature influence on the structural evolution of sp{sup 2} hybridized boron nitride (BN) thin films during chemical vapor deposition (CVD) with triethyl boron and ammonia as precursors. Nucleation of hexagonal BN (h-BN) occurs at 1200 °C on α-Al{sub 2}O{sub 3} with an AlN buffer layer (AlN/α-Al{sub 2}O{sub 3}). At 1500 °C, h-BN grows with a layer-by-layer growth mode on AlN/α-Al{sub 2}O{sub 3} up to ∼4 nm after which the film structure changes to rhombohedral BN (r-BN). Then, r-BN growth proceeds with a mixed layer-by-layer and island growth mode. h-BN does not grow on 6H-SiC substrates; instead, r-BN nucleates and grows directly with a mixed layer-by-layer and island growth mode. These differences may be caused by differences in substrate surface temperature due to different thermal conductivities of the substrate materials. These results add to the understanding of the growth process of sp{sup 2}-BN employing CVD.

36 MATERIALS SCIENCE↗

In situ characterization of the deposition of anatase TiO2 on rutile TiO2(110)

Growing additional TiO2 thin films on TiO2 substrates in ultrahigh vacuum (UHV)-compatible chambers have many applications for sample preparation, such as smoothing surface morphologies, templating, and covering impurities. However, there has been little study into how to control the morphology of TiO2 films deposited onto TiO2 substrates, especially using atomic layer deposition (ALD) precursors. Here, the authors show the growth of a TiO2 film on a rutile TiO2(110) surface using titanium tetraisopropoxide (TTIP) and water as the precursors at pressures well below those used in common ALD reactors. X-ray absorption spectroscopy suggests that the relatively low sample temperature (175 °C) results in an anatase film despite the rutile template of the substrate. Using ambient pressure x-ray photoelectron spectroscopy, the adsorption of TTIP was found to be self-limiting, even at room temperature. No molecular water was found to adsorb on the surface. The deposited thickness suggests that an alternate chemical vapor deposition growth mechanism may be dominating the growth process. This study highlights the possibility that metal oxide film deposition from molecular precursors is an option for sample preparations in common UHV-compatible chambers.

Head, Ashley R.↗

Tutorial on interpreting x-ray photoelectron spectroscopy survey spectra: Questions and answers on spectra from the atomic layer deposition of Al 2 O 3 on silicon

X-ray photoelectron spectroscopy (XPS) has become the most widely used method for chemically analyzing surfaces. In XPS, photoelectrons are generated by irradiating a surface with X-rays. As the importance and popularity of XPS have grown, it has drawn users without significant XPS experience, and incorrect and incomplete interpretations of XPS spectra regularly appear in the literature. This tutorial is designed as a tool to guide less experienced users in analyzing XPS survey spectra. Here, we examine a series of XPS survey spectra collected during the atomic layer deposition of Al2O3 from trimethylaluminum and water precursors. Prior to this, brief explanations of XPS and atomic layer deposition (ALD) are presented. This tutorial is structured as a series of questions and answers that the interested reader may choose to engage in. The XPS spectra are scrutinized to extract information about the elements present in the film, the presence of contamination, and the nature of the film growth process. The questions and answers in this tutorial address important fundamental issues common to the interpretation of many XPS survey spectra in the context of ALD.

XPS spectrum, Tutorial, Atomic layer deposition↗

Crystal-field effects in fluoride crystals for optical refrigeration

The field of optical refrigeration of rare-earth-doped solids has recently seen an important breakthrough. The cooling of a YLiF{sub 4} (YLF) crystal doped with 5 mol% Yb3+ to 155 K by Seletskiy et al [NPhot] has surpassed the lowest temperatures ({approx}170 K for {approx}100 mW cooling capacity) that are practical with commercial multi-stage thermoelectric coolers (TEC) [Glaister]. This record performance has advanced laser cooling into an application relevant regime and has put first practical optical cryocoolers within reach. The result is also relevant from a material perspective since for the first time, an Yb3+-doped crystal has outperformed an Yb3+-doped glass. The record temperature of 208 K was held by the Yb3+-doped fluorozirconate glass ZBLAN. Advanced purification and glass fabrication methods currently under development are expected to also advance ZBLAN:Yb3+ to sub-TEC temperatures. However, recent achievements with YLF:Yb3+ illustrate that crystalline materials may have two potentially game-changing advantajes over glassy materials. First, the crystalline environment reduces the inhomogeneous broadening of the Yb3+ electronic transitions as compared to a glassy matrix. The respective sharpening of the crystal-field transitions increases the peak absorption cross section at the laser excitation wavelength and allows for more efficient pumping of the Yb3+ ions, particularly at low temperatures. Second, many detrimental impurities present in the starting materials tend to be excluded from the crystal during its slow growth process, in contrast to a glass where all impurities present in the starting materials are included in the glass when it is formed by temperature quenching a melt. The ultra high purity required for laser cooling materials [PRB] therefore may be easier to realize in crystals than in glasses. Laser cooling occurs by laser excitation of a rare-earth ion followed by anti-Stokes luminescence. Each such laser-cooling cycle extracts thermal energy from the solid and carries it away as high-entropy light, thereby cooling the material. In the ideal case, the respective laser-cooling power is given by the pump wavelength ({lambda}{sub p}), the mean fluorescence wavelength ({bar {lambda}}{sub L}), and the absorption coefficient (a{sub r}) of the pumped transition. These quantities are solely determined by crystal field interactions. On one hand, a large crystal-field splitting offers a favorably large difference of {lambda}{sub p} - {bar {lambda}}{sub L} and thus a high cooling efficiency {eta}{sub cool} = ({lambda}{sub p} - {bar {lambda}}{sub L})/{bar {lambda}}{sub L}. On the other hand, a small crystal-field splitting offers a high thermal population (n{sub i}) of the initial state of the pumped transition, giving a high pump absorption coefficient and thus high laser cooling power, particularly at low temperatures. A quantitative description of crystal-field interactions is therefore critical to the understanding and optimization of optical refrigeration. In the case of Yb3+ as the laser cooling ion, however, development of a crystal-field model is met with substantial difficulties. First, Yb3+ has only two 4/multiplets, {sup 2}F{sub 7/2} and {sup 2}F{sub 5/2}, which lead to at most 7 crystal-field levels. This makes it difficult, and in some cases impossible, to evaluate the crystal-field Hamiltonian, which has at least 4 parameters for any Yb3+ point symmety lower than cubic. Second, {sup 2}F{sub 7/2}{leftrightarrow}{sup 2}F{sub 5/2} transitions exhibit an exceptionally strong electron-phonon coupling compared to 4f transitions of other rare earths. This makes it difficult to distinguish electronic from vibronic transitions in the absorption and luminescence spectra and to reliably identify the crystal-field levels. Yb3+ crystal-field splittings reported in the literature should thus generally be viewed with caution. This paper explores the effects of crystal-field interactions on the laser cooling performance of Yb3+-doped fluoride crystals. It is shown that the total crystal-field splitting of the {sup 2}F{sub 7/2} and {sup 2}F{sub 5/2} multiplets of Yb3+ can be estimated from crystal-field splittings of other rare-earth-doped fluoride crystals. This approach takes advantage of an extensive body of experimental work from which Yb3+ doped fluoride crystals with favorable laser cooling properties might be identified. Section 2 reviews the crystal-field splitting of the 4f electronic states and introduces the crystal-field strength as a means to predict the total crystal-field splitting of the {sup 2}F{sub 7/2} and {sup 2}F{sub 5/2} multiplets. Section 3 illustrates the effect of the total {sup 2}F{sub 7/2} crystal field splitting on the laser cooling power. Finally, Section 4 compiles literature data on crystal-field splittings in fluoride crystals from which the {sup 2}F{sub 7/2} splitting is predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Low-Cycle Fatigue on Fracture Mechanics Parameters According to Speckle Interferometry

Evolution of parameters of fracture mechanics at various stages of low-cycle damage is studied. The developed approach is based on elaboration of optical interference measurements of the deformation response to a small crack length increment. Three sequential symmetrical notches simulate the fatigue crack growth process across the cumulative fatigue damage zone caused by low-cycle fatigue. The values of tangential components of displacement that are measured at several points on cut edges by electronic speckle interferometry are initial experimental information. The coefficients of stress intensity (SIC) and T strains are determined on the basis of the Williams solution. Values of opening and coefficients of stress intensity (SIC) and T strains for cracks of different length with fixed values of preloading cycles N{sub c} equal 0, 100, 1000, 1800, 2500, and 3300 are obtained. The dependences of the parameters of fracture mechanics for cracks of the fixed length on N{sub c} are constructed.

36 MATERIALS SCIENCE↗

Pulse regime in formation of fractal fibers

The pulse regime of vaporization of a bulk metal located in a buffer gas is analyzed as a method of generation of metal atoms under the action of a plasma torch or a laser beam. Subsequently these atoms are transformed into solid nanoclusters, fractal aggregates and then into fractal fibers if the growth process proceeds in an external electric field. We are guided by metals in which transitions between s and d-electrons of their atoms are possible, since these metals are used as catalysts and filters in interaction with gas flows. The resistance of metal fractal structures to a gas flow is evaluated that allows one to find optimal parameters of a fractal structure for gas flow propagation through it. The thermal regime of interaction between a plasma pulse or a laser beam and a metal surface is analyzed. It is shown that the basic energy from an external source is consumed on a bulk metal heating, and the efficiency of atom evaporation from the metal surface, that is the ratio of energy fluxes for vaporization and heating, is 10{sup –3}–10{sup –4} for transient metals under consideration. A typical energy flux (~10{sup 6} W/cm{sup 2}), a typical surface temperature (~3000 K), and a typical pulse duration (~1 μs) provide a sufficient amount of evaporated atoms to generate fractal fibers such that each molecule of a gas flow collides with the skeleton of fractal fibers many times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the technological growth parameters in the InAs-GaAs system for the MOCVD synthesis of “Multimodal” InAs QDs

The specific features of growth in the InAs-GaAs system by the metal-organic chemical vapor deposition method are studied. The dependences of the In content of the InxGa{sub 1−x}As solid solution and of the InAs growth rate on the molar flow of In in a wide temperature range (480–700°C) are determined. The growth processes of InAs quantum dots (QDs) on GaAs with different surface misorientations are examined. The conditions are found in which InAs QDs are formed with a small number of defects and at a high density on a GaAs “sublayer” grown at a high rate. An epitaxial technique is developed for the synthesis of InAs QDs with multimodal size distribution and an extended photoluminescence spectrum, which can be effectively used in designing solar cells with QDs in the active region.

36 MATERIALS SCIENCE↗

effect of the parameters of AlN/GaN/AlGaN and AlN/GaN/InAlN heterostructures with a two-dimensional electron gas on their electrical properties and the characteristics of transistors on their basis

The effect of the layer thickness and composition in AlGaN/AlN/GaN and InAlN/AlN/GaN transistor heterostructures with a two-dimensional electron gas on their electrical and the static parameters of test transistors fabricated from such heterostructures are experimentally and theoretically studied. It is shown that the use of an InAlN barrier layer instead of AlGaN results in a more than twofold increase in the carrier concentration in the channel, which leads to a corresponding increase in the saturation current. In situ dielectric-coating deposition on the InAlN/AlN/GaN heterostructure surface during growth process allows an increase in the maximum saturation current and breakdown voltages while retaining high transconductance.

36 MATERIALS SCIENCE↗

An Improved Convection Parameterization with Detailed Aerosol–Cloud Microphysics for a Global Model

Abstract A new microphysical treatment that includes aerosol–cloud interactions and secondary ice production (SIP) mechanisms is implemented in the convection scheme of the Community Atmosphere Model, version 6 (CAM6). The approach is to embed a 1D Lagrangian parcel model in the bulk convective plume of the existing deep convection parameterization. Aerosol activation, growth processes including collision/coalescence, and three processes of SIP mechanisms, two of which are normally overlooked in atmospheric models, are represented in this embedded parcel model. These microphysical processes are treated with a hybrid bin/bulk scheme and a high spatial and temporal resolution for the integration of the embedded parcel in 1D, allowing vertical velocity to determine the microphysical evolution following the in-cloud motion during ascent. Simulations of an observed case (Midlatitude Continental Convective Clouds Experiment) of a mesoscale convective system in Oklahoma, United States, with a single-column model (SCAM) version of CAM, are compared with aircraft in situ and ground-based observations of microphysical properties from the convection and precipitation. Results from the validation show the new microphysical scheme has a good representation of the ice initiation in the bulk convective plume, including the known and empirically quantified pathways of primary and secondary initiation, with benefits for the accuracy of properties of its supercooled cloud liquid. The sensitivity simulations and use of tagging tracers for the validated simulation confirm that the newly included SIP mechanisms are of paramount importance for convective microphysics and can be successfully treated in the global model.

54 ENVIRONMENTAL SCIENCES↗

Degradation of CVD-Grown MoS2 Subjected to DC Electrical Stress

Devices containing transition metal dichalcogenides are being investigated for next generation electronics. Understanding material properties under typical use conditions is important for the longevity and effectiveness of these devices. In this study, CVD-grown MoS2 crystals with pre-existing defects from the growth process were subjected to DC-voltages of 10 V, 20 V, and 40 V for up to 96 h. The presence of pre-existing defects was found to lead to more extensive material damage that scales with voltage and time. SEM, AFM, Raman and photoluminescence imaging indicated regions of increased defect concentration post-electrical stress.

2D materials↗

AmeriFlux CA-NS1 UCI-1850 burn site

This is the AmeriFlux version of the carbon flux data for the site CA-NS1 UCI-1850 burn site. Site Description - The UCI-1850 site is located in a continental boreal forest, dominated by black spruce trees, within the BOREAS northern study area in central Manitoba, Canada. The site is a member of a chronological series of sites that are representative secondary succession growth stages after large stand replacement fires. Black spruce trees undergo a slow growth process enabling the accurate determination of the chronosequence of stand age disturbance. Additionally, boreal forests make up approximately 25% of forest ecosystems on earth. With both of these in mind, the UCI sites provide an excellent location to study the CO2 exchange between the atmosphere and boreal forest ecosystems as a function of sequential wildfires.

Goulden, Mike↗