Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “function composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

On the Phase Composition, Morphology, and Optical and Electronic Characteristics of AlN Nanofilms Grown on Misoriented GaAs(100) Substrates

Thin AlN nanofilms are produced by reactive ion-plasma deposition onto GaAs(100) substrates misoriented with respect to the 〈100〉 direction to different degrees. It is shown that growth on substrates misoriented with respect to the 〈100〉 direction to different degrees results in the formation of AlN films with different phase compositions and crystal states. An increase in the degree of misorientation of the GaAs(100) substrate used for growth influences both the structural quality of AlN nanofilms and their electronic structure, surface morphology, and optical properties. Thus, the morphology, surface composition, and optical functional characteristics of AlN/GaAs(100) heterophase systems can be controlled using differently misoriented GaAs(100) substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of 2D Transport and Performance Characteristics for Lateral Power Devices Based on AlGaN Alloys

In this paper, predicted lateral power device performance as a function of alloy composition is characterized by a standard lateral device figure-of-merit (LFOM) that depends on mobility, critical electric field, and sheet carrier density. The paper presents calculations of AlGaN electron mobility in lateral devices such as HEMTs across the entire alloy composition range. Alloy scattering and optical polar phonon scattering are the dominant mechanisms limiting carrier mobility. Due to the significant degradation of mobility from alloy scattering, at room temperature Al fractions greater than about 85% are required for improved LFOM relative to GaN using a conservative sheet charge density of 1 × 10 13 cm –2 . However, at higher temperatures at which AlGaN power devices are anticipated to operate, this “breakeven” composition decreases to about 65% at 500 K, for example. For high-frequency applications, the Johnson figure-of-merit (JFOM) is the relevant metric to compare potential device performance across materials platforms. At room temperature, the JFOM for AlGaN alloys is predicted to surpass that of GaN for Al fractions greater than about 40%.

36 MATERIALS SCIENCE↗

First Principles Calculations of Oxygen Vacancy Formation and Migration in Ba 1-x Sr x Co 1-y FeyO 3-δ Perovskites

Based on first principles DFT calculations, we analyze oxygen vacancy formation and migration energies as a function of chemical composition in complex multicomponent (Ba,Sr)(Co,Fe)O 3-δ perovskites which are candidate materials for SOFC cathodes and permeation membranes. The atomic relaxation, electronic charge redistribution and energies of the transition states of oxygen migration are compared for several perovskites to elucidate the atomistic reason for the exceptionally low migration barrier in Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ that was previously determined experimentally. The critical comparison of Ba 1-x Sr x Co 1-y FeyO 3-δ perovskites with different cation compositions and arrangements shows that in addition to the geometric constraints the electronic structure plays a considerable role for the height of the oxygen migration barrier in these materials. These findings help understand advantages and limitations of the fast oxygen permeation and exchange properties of Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ .

36 MATERIALS SCIENCE↗

Performance and Architecture Lab Modeling Tool

Analytical application performance models are critical for diagnosing performance-limiting resources, optimizing systems, and designing machines. Creating models, however, is difficult. Furthermore, models are frequently expressed in forms that are hard to distribute and validate. The Performance and Architecture Lab Modeling tool, or Palm, is a modeling tool designed to make application modeling easier. Palm provides a source code modeling annotation language. Not only does the modeling language divide the modeling task into sub problems, it formally links an application's source code with its model. This link is important because a model's purpose is to capture application behavior. Furthermore, this link makes it possible to define rules for generating models according to source code organization. Palm generates hierarchical models according to well-defined rules. Given an application, a set of annotations, and a representative execution environment, Palm will generate the same model. A generated model is a an executable program whose constituent parts directly correspond to the modeled application. Palm generates models by combining top-down (human-provided) semantic insight with bottom-up static and dynamic analysis. A model's hierarchy is defined by static and dynamic source code structure. Because Palm coordinates models and source code, Palm's models are 'first-class' and reproducible. Palm automates common modeling tasks. For instance, Palm incorporates measurements to focus attention, represent constant behavior, and validate models. Palm's workflow is as follows. The workflow's input is source code annotated with Palm modeling annotations. The most important annotation models an instance of a block of code. Given annotated source code, the Palm Compiler produces executables and the Palm Monitor collects a representative performance profile. The Palm Generator synthesizes a model based on the static and dynamic mapping of annotations to program behavior. The model -- an executable program -- is a hierarchical composition of annotation functions, synthesized functions, statistics for runtime values, and performance measurements.

Tallent, Nathan↗

Comparison of sugar content for ionic liquid pretreated Douglas-fir woodchips and forestry residues

The development of affordable woody biomass feedstocks represents a significant opportunity in the development of cellulosic biofuels. Primary woodchips produced by forest mills are considered an ideal feedstock, but the prices they command on the market are currently too expensive for biorefineries. In comparison, forestry residues represent a potential low-cost input but are considered a more challenging feedstock for sugar production due to complexities in composition and potential contamination arising from soil that may be present. We compare the sugar yields, changes in composition in Douglas-fir woodchips and forestry residues after pretreatment using ionic liquids and enzymatic saccharification in order to determine if this approach can efficiently liberate fermentable sugars. : These samples were either mechanically milled through a 2 mm mesh or pretreated as received with the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate [C 2 mim][OAc] at 120°C and 160°C. IL pretreatment of Douglas-fir woodchips and forestry residues resulted in approximately 71-92% glucose yields after enzymatic saccharification. X-ray diffraction (XRD) showed that the pretreated cellulose was less crystalline after IL pretreatment as compared to untreated control samples. Two-dimensional nuclear magnetic resonance spectroscopy (2D-NMR) revealed changes in lignin and hemicellulose structure and composition as a function of pretreatment. Mass balances of sugar and lignin streams for both the Douglas-fir woodchips and forestry residues throughout the pretreatment and enzymatic saccharification processes are presented. While the highest sugar yields were observed with the Douglas-fir woodchips, reasonably high sugar yields were obtained from forestry residues after ionic liquid pretreatment. Structural changes to lignin, cellulose and hemicellulose in the woodchips and forestry residues of Douglas-fir after [C 2 mim][OAc] pretreatment are analyzed by XRD and 2D-NMR, and indicate that significant changes occurred. Irrespective of the particle sizes used in this study, ionic liquid pretreatment successfully allowed high glucose yields after enzymatic saccharification. These results indicate that forestry residues may be a more viable feedstock than previously thought for the production of biofuels.

59 BASIC BIOLOGICAL SCIENCES↗

Description of Axial Detail for ROK Fuel

For the purpose of NDA simulations of the ROK fuel assemblies, we have developed an axial burnup distribution to represent the pins themselves based on gamma scans of rods in the G23 assembly. For the purpose of modeling the G23 assembly (both at ORNL and LANL), the pin-by-pin burnup map as simulated by ROK is being assumed to represent the radial burnup distribution. However, both DA and NDA results indicate that this simulated estimate is not 100% correct. In particular, the burnup obtained from the axial gamma scan of 7 pins does not represent exactly the same 'average' pin burnup as the ROK simulation. Correction for this discrepancy is a goal of the well-characterized assembly task but will take time. For now, I have come up with a correlation for 26 axial points of the burnup as obtained by gamma scans of 7 different rods (C13, G01, G02, J11, K10, L02, and M04, neglecting K02 at this time) to the average burnup given by the simulation for each of the rods individually. The resulting fraction in each axial zone is then averaged for the 7 different rods so that it can represent every fuel pin in the assembly. The burnup in each of the 26 axial zones of rods in all ROK assemblies will then be directly adjusted using this fraction, which is given in Table 1. Note that the gamma scan data given by ROK for assembly G23 included a length of ~3686 mm, so the first 12 mm and the last 14 mm were ignored to give an actual rod length of ~366 cm. To represent assembly F02 in which no pin-by-pin burnup distribution is given by ROK, we must model it using infinitely-reflected geometry but can look at the effects of measuring in different axial zones by using intermediate burnup files (i.e. smaller burnups than 28 GWd/MTU) and determining which axial zone(s) each burnup represents. Details for assembly F02 are then given in Tables 2 and 3, which is given in Table 1 and has 44 total axial zones to represent the top meter in explicit detail in addition to the other 26 zones. Note that the MCNP files for F02 were created using the Monte Carlo burnup linkage code Monteburns, which saves MCNP input files with detailed compositions as a function of burnup. The 'intermediate burnup files' produced for F02 include a cooling time of 27 years. The axial location of 5 spacers was also included in the ROK F02 assembly in which each spacer contained a length of 3.81 cm. Note that due to the nature of Monteburns, which was run in a special fashion for this problem, the step number increments after the 27 year decay, so the second column of Table 2 refers to the step number that should be used in the Monteburns files.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Updated FY12 Ceramic Fuels Irradiation Test Plan

The Fuel Cycle Research and Development program is currently devoting resources to study of numerous fuel types with the aim of furthering understanding applicable to a range of reactors and fuel cycles. In FY11, effort within the ceramic fuels campaign focused on planning and preparation for a series of rabbit irradiations to be conducted at the High Flux Isotope Reactor located at Oak Ridge National Laboratory. The emphasis of these planned tests was to study the evolution of thermal conductivity in uranium dioxide and derivative compositions as a function of damage induced by neutron damage. Current fiscal realities have resulted in a scenario where completion of the planned rabbit irradiations is unlikely. Possibilities for execution of irradiation testing within the ceramic fuels campaign in the next several years will thus likely be restricted to avenues where strong synergies exist both within and outside the Fuel Cycle Research and Development program. Opportunities to augment the interests and needs of modeling, advanced characterization, and other campaigns present the most likely avenues for further work. These possibilities will be pursued with the hope of securing future funding. Utilization of synthetic microstructures prepared to better understand the most relevant actors encountered during irradiation of ceramic fuels thus represents the ceramic fuel campaign's most efficient means to enhance understanding of fuel response to burnup. This approach offers many of the favorable attributes embraced by the Separate Effects Testing paradigm, namely production of samples suitable to study specific, isolated phenomena. The recent success of xenon-imbedded thick films is representative of this approach. In the coming years, this strategy will be expanded to address a wider range of problems in conjunction with use of national user facilities novel characterization techniques to best utilize programmatic resources to support a science-based research program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integrated Disposal Facility FY 2012 Glass Testing Summary Report

PNNL is conducting work to provide the technical basis for estimating radionuclide release from the engineered portion of the disposal facility for Hanford immobilized low-activity waste (ILAW). Before the ILAW can be disposed, DOE must conduct a performance assessment (PA) for the Integrated Disposal Facility (IDF) that describes the long-term impacts of the disposal facility on public health and environmental resources. As part of the ILAW glass testing program, PNNL is implementing a strategy, consisting of experimentation and modeling, to provide the technical basis for estimating radionuclide release from the glass waste form in support of future IDF PAs. Key activities in FY12 include upgrading the STOMP/eSTOMP codes to do near-field modeling, geochemical modeling of PCT tests to determine the reaction network to be used in the STOMP codes, conducting PUF tests on selected glasses to simulate and accelerate glass weathering, developing a Monte Carlo simulation tool to predict the characteristics of the weathered glass reaction layer as a function of glass composition, and characterizing glasses and soil samples exhumed from an 8-year lysimeter test. The purpose of this report is to summarize the progress made in fiscal year (FY) 2012 and the first quarter of FY 2013 toward implementing the strategy with the goal of developing an understanding of the long-term corrosion behavior of LAW glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crystallization In High Level Waste (HLW) Glass Melters: Operational Experience From The Savannah River Site

processing strategy for the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The basis of this alternative approach is an empirical model predicting the crystal accumulation in the WTP glass discharge riser and melter bottom as a function of glass composition, time, and temperature. When coupled with an associated operating limit (e.g., the maximum tolerable thickness of an accumulated layer of crystals), this model could then be integrated into the process control algorithms to formulate crystal tolerant high level waste (HLW) glasses targeting higher waste loadings while still meeting process related limits and melter lifetime expectancies. This report provides a review of the scaled melter testing that was completed in support of the Defense Waste Processing Facility (DWPF) melter. Testing with scaled melters provided the data to define the DWPF operating limits to avoid bulk (volume) crystallization in the un-agitated DWPF melter and provided the data to distinguish between spinels generated by K-3 refractory corrosion versus spinels that precipitated from the HLW glass melt pool. This report includes a review of the crystallization observed with the scaled melters and the full scale DWPF melters (DWPF Melter 1 and DWPF Melter 2). Examples of actual DWPF melter attainment with Melter 2 are given. The intent is to provide an overview of lessons learned, including some example data, that can be used to advance the development and implementation of an empirical model and operating limit for crystal accumulation for WTP. Operation of the first and second (current) DWPF melters has demonstrated that the strategy of using a liquidus temperature predictive model combined with a 100 °C offset from the normal melter operating temperature of 1150 °C (i.e., the predicted liquidus temperature (TL) of the glass must be 1050 °C or less) has been successful in preventing any detrimental accumulation of spinel in the DWPF melt pool, and spinel has not been observed in any of the pour stream glass samples. Spinel was observed at the bottom of DWPF Melter 1 as a result of K-3 refractory corrosion. Issues have occurred with accumulation of spinel in the pour spout during periods of operation at higher waste loadings. Given that both DWPF melters were or have been in operation for greater than 8 years, the service life of the melters has far exceeded design expectations. It is possible that the DWPF liquidus temperature approach is conservative, in that it may be possible to successfully operate the melter with a small degree of allowable crystallization in the glass. This could be a viable approach to increasing waste loading in the glass assuming that the crystals are suspended in the melt and swept out through the riser and pour spout. Additional study is needed, and development work for WTP might be leveraged to support a different operating limit for the DWPF. Several recommendations are made regarding considerations that need to be included as part of the WTP crystal tolerant strategy based on the DWPF development work and operational data reviewed here. These include: Identify and consider the impacts of potential heat sinks in the WTP melter and glass pouring system; Consider the contributions of refractory corrosion products, which may serve to nucleate additional crystals leading to further accumulation; Consider volatilization of components from the melt (e.g., boron, alkali, halides, etc.) and determine their impacts on glass crystallization behavior; Evaluate the impacts of glass REDuction/OXidation (REDOX) conditions and the distribution of temperature within the WTP melt pool and melter pour chamber on crystal accumulation rate; Consider the impact of precipitated crystals on glass viscosity; Consider the impact of an accumulated crystalline layer on thermal convection currents and bubbler effectiveness within the melt pool; Evaluate the impact of spinel accumulation on Joule heating of the WTP melt pool; and Include noble metals in glass melt experiments because of their potential to act as nucleation sites for spinel crystallization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Temperature Viscosity Model For Glassy Slags Produced From The Air Products Municipal Waste Gasification Process

Air Products, Inc. (AP) is developing a technology that uses plasma-enhanced gasification to create syngas from Municipal Solid Waste (MSW), for the purpose of generating electricity at a large scale. The process is intended to convert the inorganic components in MSW to a slag that flows easily through and from the gasifier. AP and the Savannah River National Laboratory (SRNL) have established a Cooperative Research and Development Agreement (CRADA) to improve the properties of the slag material produced from MSW gasification. A primary objective for AP is the development of a viscosity model, which can be used to predict the viscosity of the slag produced in the gasification process as a function of its composition in order to ensure that the incoming feeds will ultimately yield slag that can effectively be poured from the gasifier. In addition, the development of such a model could allow AP to determine the type and amount of additives to mix with the incoming MSW to target a specific viscosity range as well as identify waste compositions that could lead to difficulties during processing.

high temperature↗

Road Map for Development of Crystal-Tolerant High Level Waste Glasses

The U.S. Department of Energy (DOE) is building a Tank Waste Treatment and Immobilization Plant (WTP) at the Hanford Site in Washington to remediate 55 million gallons of radioactive waste that is being temporarily stored in 177 underground tanks. Efforts are being made to increase the loading of Hanford tank wastes in glass while meeting melter lifetime expectancies and process, regulatory, and product quality requirements. This road map guides the research and development for formulation and processing of crystal-tolerant glasses, identifying near- and long-term activities that need to be completed over the period from 2014 to 2019. The primary objective is to maximize waste loading for Hanford waste glasses without jeopardizing melter operation by crystal accumulation in the melter or melter discharge riser. The potential applicability to the Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) will also be addressed in this road map. The planned research described in this road map is motivated by the potential for substantial economic benefits (significant reductions in glass volumes) that will be realized if the current constraints (T 1% for WTP and T L for DWPF) are approached in an appropriate and technically defensible manner for defense waste and current melter designs. The basis of this alternative approach is an empirical model predicting the crystal accumulation in the WTP glass discharge riser and melter bottom as a function of glass composition, time, and temperature. When coupled with an associated operating limit (e.g., the maximum tolerable thickness of an accumulated layer of crystals), this model could then be integrated into the process control algorithms to formulate crystal-tolerant high-level waste (HLW) glasses targeting high waste loadings while still meeting process related limits and melter lifetime expectancies. The modeling effort will be an iterative process, where model form and a broader range of conditions, e.g., glass composition and temperature, will evolve as additional data on crystal accumulation are gathered. Model validation steps will be included to guide the development process and ensure the value of the effort (i.e., increased waste loading and waste throughput). A summary of the stages of the road map for developing the crystal-tolerant glass approach, their estimated durations, and deliverables is provided.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Upgrade to Ion Exchange Modeling for Removal of Technetium from Hanford Waste Using SuperLig ® 639 Resin

This report documents the development and application of computer models to describe the sorption of pertechnetate [TcO 4 - ], and its surrogate perrhenate [ReO 4 - ], on SuperLig ® 639 resin. Two models have been developed: 1) A thermodynamic isotherm model, based on experimental data, that predicts [TcO 4 - ] and [ReO 4 - ] sorption as a function of solution composition and temperature and 2) A column model that uses the isotherm calculated by the first model to simulate the performance of a full-scale sorption process. The isotherm model provides a synthesis of experimental data collected from many different sources to give a best estimate prediction of the behavior of the pertechnetate-SuperLig ® 639 system and an estimate of the uncertainty in this prediction. The column model provides a prediction of the expected performance of the plant process by determining the volume of waste solution that can be processed based on process design parameters such as column size, flow rate and resin physical properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Upgrade to Ion Exchange Modeling for Removal of Technetium from Hanford Waste Using SuperLig ® 639 Resin

This report documents the development and application of computer models to describe the sorption of pertechnetate [TcO 4 ⁻], and its surrogate perrhenate [ReO 4 ⁻], on SuperLig ® 639 resin. Two models have been developed: 1) A thermodynamic isotherm model, based on experimental data, that predicts [TcO 4 ⁻] and [ReO 4 ⁻] sorption as a function of solution composition and temperature and 2) A column model that uses the isotherm calculated by the first model to simulate the performance of a full-scale sorption process. The isotherm model provides a synthesis of experimental data collected from many different sources to give a best estimate prediction of the behavior of the pertechnetate-SuperLig ® 639 system and an estimate of the uncertainty in this prediction. The column model provides a prediction of the expected performance of the plant process by determining the volume of waste solution that can be processed based on process design parameters such as column size, flow rate and resin physical properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Upgrade to Ion Exchange Modeling for Removal of Technetium from Hanford Waste Using SuperLig ® 639 Resin

This report documents the development and application of computer models to describe the sorption of pertechnetate [TcO 4 ⁻], and its surrogate perrhenate [ReO 4 ⁻], on SuperLig ® 639 resin. Two models have been developed: 1) A thermodynamic isotherm model, based on experimental data, that predicts [TcO 4 ⁻] and [ReO 4 ⁻] sorption as a function of solution composition and temperature and 2) A column model that uses the isotherm calculated by the first model to simulate the performance of a full-scale sorption process. The isotherm model provides a synthesis of experimental data collected from many different sources to give a best estimate prediction of the behavior of the pertechnetate-SuperLig ® 639 system and an estimate of the uncertainty in this prediction. The column model provides a prediction of the expected performance of the plant process by determining the volume of waste solution that can be processed based on process design parameters such as column size, flow rate and resin physical properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rapid Temperature Swing Adsorption using Polymeric/Supported Amine Hollow Fibers

This project is a bench-scale, post-combustion capture project carried out at Georgia Tech (GT) with support and collaboration with GE, Algenol Biofuels, Southern Company and subcontract to Trimeric Corporation. The focus of the project is to develop a process based on composite amine-functionalized oxide / polymer hollow fibers for use as contactors in a rapid temperature swing adsorption post-combustion carbon dioxide capture process. The hollow fiber morphology allows coupling of efficient heat transfer with effective gas contacting, potentially giving lower parasitic loads on the power plant compared to traditional contacting strategies using solid sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final Technical Report for Department of Energy Award DE-SC0010857, “Towards parameterization of root-rock hydrologic interactions in the Earth System Model”

The goal of the project is to understand how plants survive droughts, as the decimation of transpiration could shift the surface energy balance from latent heat to sensible heat, leading to warming of the lower atmosphere and amplification of drought. The hypothesis we investigated is that there is a store of moisture in the weathered bedrock below the organic soil mantle, so that plants that have roots deep enough to access this moisture reservoir could survive drought. We developed a new stochastic parameterization of hydraulic conductivity that introduces heterogeneity into the traditional formulation and captures the preferential flow through the weathered bedrock (Vrettas and Fung, 2015). With the new parameterization in the Richards equation, we succeeded in reproducing the fluctuations of the water table in seven well locations over six years. We also and carried out a series of model experiments that explore how subsurface properties impact evapotranspiration (ET) in a Mediterranean climate where a significant portion of ET is observed to take place in the dry and sunny summer when the precipitation is insufficient to meet the demand. Our results show that hydraulic redistribution is important for sustaining ET in the dry seasons when the vertical gradient in water potential is large. The results highlight the importance of lithology, species composition and root function for ET, especially under dry conditions.

58 GEOSCIENCES↗

One-pot catalytic conversion of biomass and alkanes: Kinetically coupling deoxygenation and dehydrogenation pathways

The stoichiometric hydrogen deficiency of carbohydrate feedstock implies that all conversion processes must remove oxygen and concurrently increase hydrogen content to form liquid hydrocarbon products. With support from the DOE Early Career program (DE-SC0008418) we have investigated the use of transition metal carbides for hydrodeoxygenation (HDO) chemistries using CH 4 and H 2 as co-reactants. We report that concurrently processing CH 4 and C 1 -C 3 oxygenates (oxygenate/CH 4 = 0.01-0.1) at 950 K on molybdenum carbide clusters encapsulated in zeolite micropores results in a staged bed with upstream CH 4 reforming and downstream CH 4 dehydroaromatization. Forward rates of CH 4 pyrolysis limited by CH 4 activation are unperturbed by the introduction of oxygenates with a (C/H) eff <0.25 after rigorously accounting for the thermodynamic reversibility caused by the H 2 produced in oxygenate reforming reactions and the fraction of the active catalyst bed deemed unavailable for CH 4 dehydroaromatization. A binomial distribution of 12 C/ 13 C isotopologues of CO is observed upon introduction of CH 3 13 COOH/CH 4 reactants suggesting that the introduction of oxygenates with a (C/H) eff <0.25 results in complete fragmentation of the oxygenate at these temperatures which in turn results in the invariance of forward rates of CH 4 pyrolysis when using CO 2 , HCOOH, or CH 3 COOH co-feeds. The stoichiometric loss of oxygen as CO when co-processing C 1 -C 3 oxygenates and CH 4 at these temperatures demonstrates that (C/H) eff =(C-O)/H is a single valued descriptor for oxygen removal on Mo/HZSM-5 catalysts. Separately, we have demonstrated the utility of transition metal carbides for vapor phase catalytic hydrodeoxygenation using molecular hydrogen with high selectivity for C-O cleavage and near absence of sequential hydrogenation reactions at atmospheric hydrogen pressure and illustrated that the faculty of transition metal carbides for selective hydrodeoxygenation arises due to oxygen-modification of the catalyst in situ. The oxophilic characteristics of these materials engender both the observed acid-metal catalytic bifunctionality and selectivity for hydrodeoxygenation. The evolution of catalyst surface composition and catalytic function under oxidative reaction environments proffers unique challenges in structural characterization of these materials and in this context, we developed and demonstrated the use of chemical titration and chemical transient studies to assess catalytic site identity and densities.

09 BIOMASS FUELS↗

A simple json format for storing and exchanging code calculation and experimental results

Calculation codes and code systems give their results in a plethora of different formats and/or files. For instance, MCNP gives a user the MCNP specific output file, the mctal file, the ptrac file, etc. while PARTISN has a PARTISN specific output file and a number of binary files with various kinds of information about the calculation. However, the results we are interested in are always the same. These can be single values such as the effective multiplication factor k eff or the effective delayed neutron fraction β eff . It can be histogram data (such as particle spectra, reaction rates, sensitivity profiles, etc.) or even pointwise data (for example the nuclide composition as a function of time, etc.). It is also worthwhile to note that this would also apply to experimental data that we may wish to compare with as well. Calculation and experimental results can basically be split into two components: attributes (or metadata) and the actual result itself. Attributes represent information about the result that are not necessarily required for its’ interpretation but that are still good to have. Often, these attributes are what we will want to filter results on. This means that these attributes are often the answer to specific questions we may have about the result. The following is a non exhaustive list of such basic questions: what type of result is it: e.g. the effective multiplication factor k eff , the effective delayed neutron fraction β eff , etc.; which case does it relate to: e.g. a specific ICSBEP case such as PU-MET-FAST-001-001; which code and version produced this result: e.g. MCNP 6.2, etc.; which nuclear data library was used to obtain the result: e.g. ENDF/B-VIII.0 or JEFF 3.3; which nuclide and reaction does it apply to (for reaction rates and sensitivity profiles); which volume in the geometry was it calculated in? The second component of the calculation or experimental result is the actual numerical data of the result. It is this data that we want to compare, exchange, plot, interpret, etc. It consists of values with optional uncertainties and units. It also includes the underlying structure (if any structure is required to interpret the result). Depending on the type of result, it may be a single value (e.g. the effective multiplication factor), an array of values (e.g. a reaction rate or particle spectrum) or even a multidimensional array. In order to exchange results between different organisations, for instance for benchmarking, people often resort to spreadsheets or custom text files that need to be filled out. While this approach works well if little information is to be exchanged, it can become cumbersome when dealing with large amounts of data (like for instance particle spectra for thousands of cases). In addition, such an approach does not always capture the metadata we may be interested in to allow for automated processing of these files. The purpose of this report is to propose a standardised json structure to store any type of result and present an associated python interface to interact with these results directly. For such a structure to be useful, it must fulfill a specific set of functional requirements that we try to meet with this proposal. The format must allow for the calculation result to stand by itself. This means that we should not have to look in multiple places to be able to understand it. For example, if the result relates to a particle spectrum, the group structure in which the result is given should be stored with it. The format should be code agnostic. This means that we do not need to know where it came from to understand it. The format should be result type agnostic. This means that the format must be generic enough so that we can even use it for results we have not thought of yet. The format should be relatively easy to interact with through different scripting or programming languages (i.e. the machine interface) while still providing a clean structure that can be used directly by any human.

97 MATHEMATICS AND COMPUTING↗