Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Compositional trends in Apollo 16 soils

Data on the bulk chemical composition of the soils collected at and under the surface of the Apollo 16 landing site are synthesized and reviewed, with emphasis placed on the way in which the compositional trends within the soils relate to the site geology. Two distinct compositional mixing trends are discerned. One involves addition to this surface Cayley component of a material such as that ejected by North Ray Crater. The other is thought to be a segment of a mixing line between the average melt fraction of the local Cayley component and pure or nearly pure anorthosite. Grain size fractions of Apollo 16 soils exhibit a general trend of higher concentrations of large ion lithophile (LIL) elements associated with plagioclase in the finest fraction compared with the coarse fractions. The suite of pristine nonmare rocks (as currently recognized) is found to be insufficient to model the Apollo 16 soils.

Korotev, R. L.↗

Silicon and oxygen isotopes in selected Allende inclusions

Silicon and oxygen data are presented for a number of Allende samples. It is found that based on oxygen and silicon isotopes, Allende samples EGG-1, EGG-6, BG1a, and 3529Yc are typical, unfractionated Allende inclusions. Where magnesium data are available, they indicate the same thing. EGG-3 is fractionated in both oxygen and silicon, as it is in magnesium. Sample D7 melilite is fractionated in oxygen by several per mil along the C2-matrix line, away from typical Allende melilites. Inclusion BG10a is a FUN inclusion with an inferred original oxygen isotopic fractionation of 8-9 per mille/amu relative to the Allende line. Silicon data for two density fractions of inclusion 3A with different mineralogies show a difference of about 2 per mille, which indicates that silicon, like oxygen, has been added to at least some mineral phases in Allende inclusions from a reservoir other than the one in which the inclusion first began to form.

Becker, R. H.↗

The Apollo 14 regolith - Chemistry of cores 14210/14211 and 14220 and soils 14141, 14148, and 14149

Neutron activation analysis was performed on bulk and size fractions from drive tube specimens from 39 cm and 16.5 cm depths, and soil samples taken at the Apollo 14 landing site. Chemical data were obtained for 31 major, minor, and trace elements in the KREEPy soils. The cores were homogeneous in chemical composition, containing 20% LKFM, 15% mare basalt, 6% ANT, and 59% high-K KREEP, according to the classifications of Laul and Papike (1980). The meteoritic fraction was 3-7% for both cores, while the chemical compositions of both cores and soils were similar. Differences were detected in the fractions finer than 10 microns, which were more feldspathic than the coarser samples. The similarities between the grains 1000-90 micron in diam and less than 10 micron in diam, in terms of chemical contents, indicates that the observed agglutinates were derived from fusion of the finest grained fraction. The dominant soil-forming processes were comminution and vertical mixing of the regolith.

Laul, J. C.↗

Aluminum chloride formation on Space Shuttle aluminum oxide

Samples of particulates collected from the exhaust of Space Shuttle launches STS-1, -4, -5, -6, and -7 were analyzed. Scanning electron microscopy and X-ray diffractometry of these samples indicated that the particulates were spherical and predominantly composed of aluminum oxide. The water-soluble weight fraction, pH, acid-soluble weight fraction, and insoluble weight fraction were determined for each sample. Water-soluble weight fractions averaged about 7 percent of the total sample weight, were generally very acidic, and contained significantly elevated concentrations of chloride and aluminum (III) ion. The high concentrations of soluble aluminum (III) and chloride ions observed suggested that aluminum chlorides and/or oxychlorides had formed on the surface of the alumina particulates. More than 72 percent by weight of each sample was insoluble in either water or strong mineral acid, and was identified as alpha-Al2O3. The results from these analyses suggest that the surface of Space Shuttle exhaust alumina particulates will be highly acidic and heavily chlorided, and that a substantial amount of the surface chloride may be chemically associated with aluminum (III) ions rather than just physically adsorbed as HCl.

Cofer, W. R., III↗

Partition coefficients of Hf, Zr, and REE between phenocrysts and groundmasses

Partition coefficients of Hf, Zr, and REE between olivine, orthopyroxene, clinopyroxene, plagioclase, garnet, amphibole, ilmenite, phlogopite, and liquid are presented. Samples consist of megacrysts in kimberlite, phenocrysts in alkaline basalts, tholeiitic basalts and andesitic to dacitic rocks, and synthetic garnet and clinopyroxene in Hawaiian tholeiites. The Hf-Lu and Zr-Lu elemental fractionations are as large as the Lu-Sm or Lu-Nd fractionation. The Hf and Zr partition coefficients between mafic phenocrysts and liquids are smaller than the Lu partition coefficients, but are similar to the Nd or Sm partition coefficients. The Hf and Zr partition coefficients between ilmenite, phlogopite, and liquid are larger than the Lu partition coefficients for these minerals and their corresponding liquids. The Hf-Zr elemental fractionation does not occur except for extreme fractionation involving Zr-minerals and extremely low fO2. These data have an important bearing on chronological and petrogenetic tracer studies involving the Lu-Hf isotopic system.

Fujimaki, H.↗

Io: Generation of Silicate Magma by Shear Melting at the Base of a Basaltic Lithosphere

Tidal theory and observational evidence indicates that about 1 w/sq. m. of energy is released at the surface of Io. In order to place limits on how much tidal energy can be dissipated within a rigid lithosphere, depth-temperature profiles were calculated for different lithosphere thickness assuming that the tidal energy was dissipated uniformly throughout the lithosphere. Thus a thick lithosphere implies that a significant fraction of the tidal energy is dissipated below the depth where solidus temperatures are reached. One possibility is that Io has a crust consisting of a low melting temperature fraction such as basalt, overlying a mantle of a high melting temperature fraction such as peridotite. Thus, if the lithosphere of Io is thicker than 30 km, as appears probable, then high rates of silicate volcanism are implied and a significant fraction of the tidal energy must be dissipated by viscous deformation rather than rigid flexure.

Carr, M. H.↗

Mapping Structures Characteristic of the Highland Boundary Scarp on Mars

In an effort to shed some light on the processes which have produced the highlands/lowlands boundary scrap on Mars, the global distributions of knobby terrain, detached and separated blocks and mesas, and craters larger than 10 km diameter were mapped. These data were represented as fractional areal percentages of the sample box, which is 2.5 deg high (latitude) along north-south profiles every 5 deg in longitude. The fractional area of crater interiors provides a way of quantitatively characterizing the boundary between cratered highlands and relatively uncratered plains. In the vicinity of the nomimal scarp there is generally good agreement between the dropoff in fractional area of craters and a drop-off in topography. Contoured versions of the fractional area of crater interiors, even at the low resolution imposed by the sample box, show good agreement with the geologic mapping. The most northerly occurrence of detached plateaus and knobby terrain were located in order to test the plausibility of the hypothesis that much of the present day highland boundary scrap is due to southward migration of a former boundary.

Frey, H.↗

The non-mass-dependent oxygen isotope effect in the electrodissociation of carbon dioxide - A step toward understanding NoMaD chemistry

A non-mass dependent (NoMaD) oxygen isotope effect is demonstrated in the dissociation of CO2 similar to that observed in the electrosynthesis of ozone. The molecular oxygen produced carries the signature of two separate isotopic fractionation processes; a mass-dependent fractionation probably due to CO2 + O isotopic exchange, and a secondary NoMaD fractionation (delta O-17 = 0.97 + or - 0.09 delta O-18, with the O2 depleted in O-17 and O-18). It is suggested that the effect is due to either the formation or relaxation of ozone in an excited electronic state. This represents the latest advance in the understanding of chemical NoMaD effects which may be essential to the explanation of non-mass-dependent fractionations observed in meteorites.

Heidenreich, J. E., III↗

Volcanological constraints of Archaean tectonics

Volcanological and trace element geochemical data can be integrated to place some constraints upon the size, character and evolutionary history of Archean volcanic plumbing, and hence indirectly, Archean tectonics. The earliest volcanism in any greenhouse belt is almost universally tholeitic basalt. Archean mafic magma chambers were usually the site of low pressure fractionation of olivine, plagioclase and later Cpx + or - an oxide phase during evolution of tholeitic liquids. Several models suggest basalt becoming more contaminated by sial with time. Data in the Uchi Subprovince shows early felsic volcanics to have fractionated REE patterns followed by flat REE pattern rhyolites. This is interpreted as initial felsic liquids produced by melting of a garnetiferous mafic source followed by large scale melting of LIL-rich sial. Rare andesites in the Uchi Subprovince are produced by basalt fractionation, direct mantle melts and mixing of basaltic and tonalitic liquids. Composite dikes in the Abitibi Subprovince have a basaltic edge with a chill margin, a rhyolitic interior with no basalt-rhyolite chill margin and partially melted sialic inclusions. Ignimbrites in the Uchi and Abitibi Subprovinces have mafic pumice toward the top. Integration of these data suggest initial mantle-derived basaltic liquids pond in a sialic crust, fractionate and melt sial. The inirial melts low in heavy REE are melts of mafic material, subsequently melting of adjacent sial produces a chamber with a felsic upper part underlain by mafic magma.

Thurston, P. C.↗

The D to H ratio on Titan and the planets: Implications for origin and evolution of planetary atmospheres

Measurements of deuterated methane show that Titan's atmosphere is enriched by at least several times in deuterium compared to the major planets. Potential causative factors for this enrichment are condensation to form tropospheric methane clouds, fractionation occuring over a hypothetical CH4-C2H2 ocean and between the ocean and the clathrate crust beneath, fractionation which occurred during the formation of Titan and fractionation occuring as a result of the evolution of Titan's atmosphere. The greater part of the observed fractionation is probably derived from the formation of Titan and the subsequent evolution of Titan atmosphere driven by photochemistry. The latter process is developed here for the first time. The D/H ratio in a planetary atmosphere is one readily available measure of the origin and evolution of the hydrogen bearing volatiles on the planet. Comparison between D/H ratio in the inner solar system and the outer solar system may pose important constraints on current theories.

Pinto, J. P.↗

Petrogenesis of calcic plagioclase megacrysts in Archean rocks

Anorthositic complexes with large equidimensional plagioclase grains of highly calcic composition occur in nearly all Archean cratons. Similar plagioclase occur as megacrysts in many Archean sills, dikes, and volcanic flows. In the Canadian Shield these units occur throughout the Archean portions of the entire shield and are particularly common as dikes over an area of a few 100,000 sq km in Ontario and Manitoba during a period of at least 100 m.y. in many different rock types and metamorphic grades. The plagioclase generally occurs in three modes: as inclusions in mafic intrusions at various stages of fractionation, as crystal segregations in anorthosite complexes, or as megacrysts in fractionated sills, dikes, and flows. Most occurrences suggest that the plagioclase was formed elsewhere before being transported to its present location. The evidence seems to be quite clear that occurrences of these types of calcic plagioclase require: (1) ponding of a relatively undifferentiated Archean tholeiitic melt at some depth; (2) isothermal crystallization of large, equidimensional homogeneous plagioclase crystals; (3) separation of the plagioclase crystals from any other crystalline phases; (4) further fractionation of melt; (5)transport of various combinations of individual plagioclase crystals and clusters of crystals by variously fractionated melts; and (6) emplacement as various types of igneous intrusions or flows.

Phinney, W. C.↗

D to H ratio and the origin and evolution of Titan's atmosphere

Potential causative factors for the unusually large ratio of CH3D to CH4 reported in the stratosphere of Titan (6 x 10 to the -4th) compared to that of Saturn (8.7 x 10 to the -5th) or Jupiter (6.7 x 10 to the -5th) are examined. With uncertainty in the observations and data reduction taken into account, an atmospheric enrichment factor of three or more is calculated for Titan relative to the planets. This enrichment factor is seen to be accounted for by condensation to form tropospheric methane clouds, fractionation occurring over a hypothetical CH4-C2H6 ocean and between the ocean and the clathrate crust beneath, fractionation which occurred during the formation of Titan, and fractionation as a result of the evolution of Titan's atmosphere. It is concluded that the greater part of the observed fractionation is probably derived from the last two of these mechanisms. The mechanisms studied do not account for the observed CH3D/CH4 value of 1.7 x 10 to the -3rd obtained by Kim and Caldwell (1982).

Pinto, J. P.↗

Cumulus cloud properties derived using Landsat satellite data

Landsat Multispectral Scanner (MSS) digital data are used to remotely sense cumulus cloud properties such as cloud fraction and cloud reflectance, along with the distribution of cloud number and cloud fraction as a function of cloud size. The analysis is carried out for four cumulus fields covering regions approximately 150 km square. Results for these initial cloud fields indicate that: (1) the common intuitive model of clouds as nearly uniform reflecting surfaces is a poor representation of cumulus clouds, (2) the cumulus clouds were often multicelled, even for clouds as small as 1 km in diameter, (3) cloud fractional coverage derived using a simple reflectance threshold is sensitive to the chosen threshold even for 57-meter resolution Landsat data, (4) the sensitivity of cloud fraction to changes in satellite sensor resolution is less sensitive than suggested theoretically, and (5) the Landsat derived cloud size distributions show encouraging similarities among the cloud fields examined.

Wielicki, B. A.↗

Parameterized materials and dynamic response characterizations in unidirectional composites

The values of phase velocities of ultrasonic waves in transversely isotropic media are presented in terms of the fiber volume fraction of a unidirectional fiberglass epoxy composite with constant matrix properties and the ratio between extensional moduli in the longitudinal and transverse directions of the composite when the properties of the fibers are changed, at a constant fiber volume fraction. The model of a homogeneous transversely isotropic medium is adopted to describe the relations between elastic properties and velocities. The displacements due to an oscillatory point source in an infinite medium are used as one measure of comparison of the behavior of the unidirectional composite according to the variations of the parameters, as described above. Values of phase velocities, elastic moduli, Poisson's ratios and displacements due to a point source can be read from the parameterized plots for a known fiber volume fraction or a known ratio between extensional moduli of the composite. Alternatively fiber volume fraction and the ratio between extensional moduli can be inferred from the plots when the values of the phase velocities are known; for example from experimental measurements. Therefore, such parameterized curves may be useful in nondestructive mechanical property and material degradation characterizations.

Williams, J. H., Jr.↗

An experimental investigation of agglutinate melting mechanisms - Shocked mixtures of Apollo 11 and 16 soils

Mixtures of chemically contrasting lunar soils have been shocked at pressures ranging from 18.2-62.0 GPa. Other than the generation of impact melts, modal and textural changes caused by shock include destruction of pore space and fused soil clasts and conversion of plagioclase to maskelynite. The loss of the fused soil component in these runs indicates that low agglutinate contents in shocked and/or compacted regolith breccias cannot be considered by themselves to be evidence of formation from immature regolith. From the petrographic and chemical data it appears that the impact glass formed mainly from the fine fraction and the fused soil component in the target, with relatively minor contributions from the other coarse clasts. The impact glasses exhibit the same chemical enrichments and depletions as their corresponding fine fractions and plot on or near a mixing line between the bulk and fine fraction of the soil in which they were formed. From this as well as several other studies it appears that the fusion of the finest fraction model is valid and that it accurately predicts the chemical systematics of impact glass formed from lunar soil. In addition, fusion of agglutinates present in the target soil is an important process.

Simon, S. B.↗

Production of isotopically heavy ozone by ultraviolet light photolysis of O2

Ozone was produced by UV photolysis (157-200 nm) of molecular oxygen. The product ozone is enriched in O-17 and O-18 on a mass-independent basis, similar to the fractionations observed in an electrical discharge. The magnitude of O-18 and O-17 enrichment decreases with decreasing pressure, suggesting the presence of two fractionation mechanisms with differing delta-O-17/delta-O-18 ratios. One of the end members would be mass-independent with delta-O-18 equal to delta-O-17 equal to about 90 percent, which is dominant above about 20 torr. The second process which is significant below about 6 torr produces O3 with delta-O-18 equals about -55 percent, delta-O-17 equals about -27.5, possibly due to isotopic selectivity in diffusion to the reaction systems wall. The delta-O-17 = delta-O-18 isotopic fractionation resembles that observed in stratospheric ozone, though the magnitude of fractionation is a factor of four less.

Thiemens, Mark H.↗

A mass-independent sulfur isotope effect in the nonthermal formation

A nonmass-dependent sulfur isotope effect is present in the rotationally symmetric S2F10 molecule, produced in an electrical discharge through sulfur tetrafluoride. A similar isotopic fractionation was observed in the product S2F10 from the electrodissociation of SF5Cl and in the reaction between fluorine atoms produced by F2 photolysis and SF2, collectively ruling out the SF5 formation process as the source of the mass-independent fractionation. The secondary dissociation of S2F10 as a source of the mass-independent fractionation is ruled out by control S2F10 dissociation experiments which are shown to produce small mass-dependent fractionations. Mass-dependent effects such as sulfur isotopic exchange and secondary dissociation reactions are significant processes for the system under study, and have been quantitatively accounted for. The role of symmetry in nonmass-dependent isotope effects is strengthened by the present experiments, and the search and characterization of mass-independent effects is extended to sulfur-containing molecules.

Bains-Sahota, Swroop K.↗

The composition of comets

The present discussion of recent studies concerning cometary composition gives attention to the results obtained by in situ measurements of Comet Halley's dust composition by Vega 1's impact mass spectrometer, which discovered a mineral fraction that appears to be CI chondritic, as well as an organic fraction consisting of highly unsaturated hydrocarbons. The mineral fraction of comets appears to form a core that is embedded in essentially organic material; the spectroscopic invisibility of carbon is due to its presence in the cometary dust. The mass of most dust particles is found to be in the 10 to the -12th to 10 to the -14th g range. A considerable fraction of the dust grains serves as an extended source of gas in the inner coma.

Jessberger, E. K.↗