Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “forcing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Casimir-Polder-like force on an atom outside a Schwarzschild black hole

We calculate, in the framework of open quantum systems, the ground state energy-level shift for a static two-level atom outside a spherically symmetric black hole in interaction with fluctuating massless scalar fields in the Boulware and Unruh vacuums. We find that the energy-level shift is position dependent and thus gives rise to a force on the atom besides the classical gravitational force. For the case of the Boulware vacuum that represents a star which has not collapsed through its event horizon, this force is attractive near the horizon and is repulsive far away from the black hole with a behavior of r{sup -3}. For the case of the Unruh vacuum which represents a radiating black hole, we find that the contribution to the Casimir-Polder-like force due to the presence of Hawking radiation is always attractive and, remarkably, this attractive force diverges at the event horizon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thickness dependence of the Casimir force between a magnetodielectric plate and a diamagnetic plate

This paper examines the repulsive Casimir force between a magnetodielectric plate, with static permeability greater than static permittivity, and a diamagnetic plate. As the thickness of the magnetodielectric plate is decreased, the attractive component of the Casimir force decreases more than the repulsive one. This effect makes the net Casimir force repulsive, and a larger repulsive Casimir force is generated compared to the Casimir force between the plates with infinite thickness.

36 MATERIALS SCIENCE↗

Measurements of nonequilibrium interatomic forces using time-domain x-ray scattering

Here, we demonstrate an experimental approach to determining the excited-state interatomic forces using femtosecond x-ray pulses from an x-ray free-electron laser. We determine experimentally the excited-state interatomic forces that connect photoexcited carriers to the nonequilibrium lattice dynamics in the prototypical Peierls-distorted material, bismuth. The forces are obtained by a constrained least-squares fit of a pairwise interatomic force model to the excited-state phonon dispersion relation as measured by the time- and momentum-resolved x-ray diffuse scattering. We find that photoexcited carriers weaken predominantly the nearest-neighbor forces, which drives the measured softening of the transverse acoustic modes throughout the Brillouin zone as well as the zone-center A 1g optical mode. This demonstrates a bond-selective approach to measuring electron-phonon coupling relevant to a broad range of photoinduced phase transitions and transient light-driven states in quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and dynamic properties of liquid tin from a new modified embedded-atom method force field

We developed a new modified embedded-atom method (MEAM) force field for liquid tin. Starting from the Ravelo and Baskes force field [Phys. Rev. Lett. 79, 2482 (1997)], the parameters are adjusted using a simulated annealing optimization procedure in order to obtain better agreement with liquid-phase data. The predictive capabilities of the new model and the Ravelo and Baskes force field are evaluated using molecular dynamics by comparing to a wide range of first-principles and experimental data. The quantities studied include crystal properties (cohesive energy, bulk modulus, equilibrium density, and lattice constant of various crystal structures), melting temperature, liquid structure, liquid density, self-diffusivity, viscosity, and vapor-liquid surface tension. We show that although the Ravelo and Baskes force field generally gives better agreement with the properties related to the solid phases of tin, the new MEAM force field gives better agreement with liquid tin properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Force field preconditioned ab initio structure relaxation method

We present a general method to accelerate ab initio atomic structural relaxations. In this method, the conjugate gradient ab initio relaxation is preconditioned by a force field relaxation. This force field is constructed on-the-flight with the information of the ab initio forces and the current atomic configuration. At each ab initio relaxation step, the so-constructed force field is used to prerelax the system, with the relaxation direction as the preconditioned direction for the ab initio conjugated gradient method. The force field model and its parameters are rather general making this method applicable for a wide range of systems commonly used in material simulations. We report more than 80 different systems have been tested representing different cases in material simulations. Across the board, we find accelerations mostly over a factor of 2 and for some large systems with a factor of 6 ~ 9 . There is no case where the relaxation becomes worse. The code and lib for this method are provided, which can be used as a plugin in a standard ab initio atomic relaxation code.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Axial Casimir force

Quantum fluctuations in vacuum can exert a dissipative force on moving objects, which is known as Casimir friction. Specifically, a rotating particle in the vacuum will eventually slow down due to the dissipative Casimir friction. Here, we confirm a dissipationless force by examining a rotating particle near a bi-isotropic media that generally breaks parity symmetry or/and time-reversal symmetry. The direction of the dissipationless vacuum force is always parallel with the rotating axis of the particle. We therefore call this dissipationless vacuum force the axial Casimir force.

36 MATERIALS SCIENCE↗

Impact of three-body forces on elastic nucleon-nucleus scattering observables

In a previous series of papers we investigated the domain of applicability of chiral potentials to the construction of a microscopic optical potential (OP) for elastic nucleon-nucleus scattering. The OP was derived at the first order of the spectator expansion of the Watson multiple scattering theory and its final expression was a folding integral between the nucleon-nucleon ( N N ) t matrix and the nuclear density of the target. In the calculations N N and three-nucleon ( 3 N ) chiral interactions were used for the target density and only the N N interaction for the N N t matrix. The purpose of this study is to achieve another step towards the calculation of a more consistent OP introducing the 3 N force also in the dynamic part of the OP. The full treatment of the 3 N interaction is beyond our present capabilities. Thus, here it is approximated with a density dependent N N interaction obtained after the averaging over the Fermi sphere. In practice, in our model the 3 N force acts as a medium correction of the bare N N interaction used to calculate the t matrix. Even if the 3 N force is treated in an approximate way, this method naturally extends our previous model of the OP and allows a direct comparison of our present and previous results. We consider as case studies the elastic scattering of nucleons off C 12 and O 16 . We present results for the differential cross section and the spin observables for different values of the projectile energy. From the comparison with the experimental data and with the results of our previous model we assess the importance of the 3 N interaction in the dynamic part of the OP. Conclusions: Our analysis indicates that the contribution of the 3 N force in the t matrix is small for the differential cross section and it is sizable for the spin observables, in particular, for the analyzing power. We find that the two-pion exchange term is the major contributor to the 3 N force. A chiral expansion order-by-order analysis of the scattering observables confirms the convergence of our results at the next-to-next-to-next-to-leading-order, as already established in our previous work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Detecting nanometer-scale new forces with coherent neutron scattering

Significant effort has been devoted to searching for new fundamental forces of nature. At short length scales (below approximately 10 nm), the strongest experimental constraints come from neutron scattering from individual nuclei in gases. The leading experiments at longer length scales instead measure forces between macroscopic test masses. We propose a hybrid of these two approaches: scattering neutrons off of a target that has spatial structure at nanoscopic length scales. Such structures will give a coherent enhancement to small-angle scattering, where the new force is most significant. This can considerably improve the sensitivity of neutron scattering experiments for new forces in the 0.1–100 nm range. We discuss the backgrounds due to Standard Model interactions and a variety of potential target structures that could be used, estimating the resulting sensitivities. We show that, using only one day of beam time at a modern neutron scattering facility, our proposal has the potential to detect new forces as much as 2 orders of magnitude beyond current laboratory constraints at the appropriate length scales.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pseudospectral collocation methods for the computation of the self-force on a charged particle: Generic orbits around a Schwarzschild black hole

The inspiral of a stellar compact object into a massive black hole, an extreme-mass-ratio inspiral, is one of the main sources of gravitational waves for the future space-based Laser Interferometer Space Antenna. We expect to be able to detect and analyze many cycles of these slowly inspiraling systems, which makes them truly high-precision tools for gravitational-wave astronomy. To that end, the use of very precise theoretical waveform templates in the data analysis is required. To build them, we need to have a deep understanding of the gravitational backreaction mechanism responsible for the inspiral. The self-force approach describes the inspiral as the action of a local force that can be obtained from the regularization of the perturbations created by the stellar compact object on the massive black hole geometry. In this paper we extend a new time-domain technique for the computation of the self-force from the circular case to the case of eccentric orbits around a nonrotating black hole. The main idea behind our scheme is to use a multidomain framework in which the small compact object, described as a particle, is located at the interface between two subdomains. Then, the equations at each subdomain are homogeneous wave-type equations, without distributional sources. In this particle-without-particle formulation, the solution of the equations is smooth enough to provide good convergence properties for the numerical computations. This formulation is implemented by using a pseudospectral collocation method for the spatial discretization, combined with a Runge-Kutta algorithm for the time evolution. We present results from several simulations of eccentric orbits in the case of a scalar charged particle around a Schwarzschild black hole, an excellent test bed model for testing the techniques for self-force computations. In particular, we show the convergence of the method and its ability to resolve the field and its derivatives across the particle location. Finally, we provide numerical values of the self-force for different orbital parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Strengthening constraints on Yukawa-type corrections to Newtonian gravity from measuring the Casimir force between a cylinder and a plate

We discuss the possibility of obtaining stronger constraints on non-Newtonian gravity from measuring the gradient of the Casimir force between a cylinder and a plate. The exact analytical expression for the Yukawa-type force in a cylinder-plate configuration is obtained, as well as its asymptotic expansions. The gravitational force is compared with the Casimir force acting between a cylinder and a plate. Numerical computations for the prospective constraints on non-Newtonian gravity are performed for a recently proposed experiment using a microfabricated cylinder attached to a micromachined oscillator. Specifically, it is shown that this experiment is expected to obtain up to 70 times stronger constraints on the Yukawa-type force, compared with the best present day limits, over a wide interaction range from 12.5 to 630 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-phase-field analysis of short-range forces between diffuse interfaces

Here, we characterize both analytically and numerically short-range forces between spatially diffuse interfaces in multi-phase-field models of polycrystalline materials. During late-stage solidification, crystal-melt interfaces may attract or repel each other depending on the degree of misorientation between impinging grains, temperature, composition, and stress. To characterize this interaction, we map the multiphase-field equations for stationary interfaces to a multidimensional classical mechanical scattering problem. From the solution of this problem, we derive asymptotic forms for short-range forces between interfaces for distances larger than the interface thickness. The results show that forces are always attractive for traditional models where each phase-field represents the phase fraction of a given grain. Those predictions are validated by numerical computations of forces for all distances. Based on insights from the scattering problem, we propose a multi-phase-field formulation that can describe both attractive and repulsive forces in real systems. This model is then used to investigate the influence of solute addition and a uniaxial stress perpendicular to the interface. Solute addition leads to bistability of different interfacial equilibrium states, with the temperature range of bistability increasing with strength of partitioning. Stress in turn, is shown to be equivalent to a temperature change through a standard Clausius-Clapeyron relation. The implications of those results for understanding grain boundary premelting are discussed.

36 MATERIALS SCIENCE↗

Derivation of a realistic forcing term to reproduce the turbulent characteristics of round jets on the centerline

Turbulence forcing techniques are often required in the numerical simulation of statistically stationary turbulent flows. However, the existing forcing techniques are not based on physics, but rather arbitrary numerical methods that sustain the turbulent kinetic energy. In this work, a forcing technique is devised to reproduce the centerline turbulent characteristics of round jets in a triply periodic box. It is derived from the Navier-Stokes equations by applying aReynolds decompositionwith themean velocity of the axisymmetric jet. The result is an anisotropic linear forcing term, which is intended to be used in a three-dimensional box to create turbulence. Four direct numerical simulations with different Re λ have been performed with these forcing terms. We report the budget of the terms in the kinetic energy equation is very close to the experimental measurement on the centerline. The anisotropy, kinetic energy k, and dissipation rate ε of the simulations are also comparable to experimental values. Finally, the kinetic energy spectrum in the axial direction, $\phi(κ_1)$, is presented. With appropriate normalizations, the spectrum agrees well with the round jet spectrum on its centerline.

42 ENGINEERING↗

Model-less Source Location for Forced Oscillation based on Synchrophasor and Moving Fast Fourier Transformation

Forced oscillations in power systems occur when the grid is driven by an external and periodic force. To quickly detect and locate the source of the forced oscillation is critical in terms of ensuring the reliability of an interconnected power grid. This paper explores the electromechanical wave propagation theory and the Fast Fourier Transformation to analyze the forced oscillations. It proposes a model-less, adaptive, fast, and accurate source location algorithm. The proposed algorithm is extensively evaluated through simulation data from a 70k-bus U.S. Eastern Interconnection test system and field-collected synchrophasor data from the distribution-level wide-area monitoring system, FNET/GridEye. The evaluation results demonstrate the correctness and effectiveness of the proposed model-less forced oscillation source location algorithm.

Wang, Weikang↗

Studying the Peak Force of Magnetic Linear Motion Devices Using Dimensional Neutrality

The merits of different sizing equations for linear motion magnetic force devices are assessed. A peak force scaling analysis for a linear magnetic coupling with respect to the volumetric force density, mass force density, magnetic shear stress and energy density is compared. By utilizing a 3-D analytic based model of a Halbach cylinder magnetic coupling it is shown that the maximizing of volumetric and mass force density is not an appropriate sizing metric for a linear magnetic actuator. Only energy density and magnetic shear stress are dimensionally neutral sizing metrics for linear actuators.

16 TIDAL AND WAVE POWER↗

Implementing Nonlinear Buoyancy and Excitation Forces in the WEC-Sim Wave Energy Converter Modeling Tool: Preprint

Wave energy converters (WECs) are commonly designed and analyzed using numerical models that combine multi-body dynamics with hydrodynamic models based on the Cummins Equation and linearized hydrodynamic coefficients. These modeling methods are attractive design tools because they are computationally inexpensive and do not require the use of high performance computing resources necessitated by high-fidelity methods, such as Navier Stokes computational fluid dynamics. Modeling hydrodynamics using linear coefficients assumes that the device undergoes small motions and that the wetted surface area of the devices is approximately constant. WEC devices, however, are typically designed to undergo large motions in order to maximize power extraction, calling into question the validity of assuming that linear hydrodynamic models accurately capture the relevant fluid-structure interactions. In this paper, we study how calculating buoyancy and Froude-Krylov forces from the instantaneous position of a WEC device (referred to as instantaneous buoyancy and Froude-Krylov forces from herein) changes WEC simulation results compared to simulations that use linear hydrodynamic coefficients. First, we describe the WEC-Sim tool used to perform simulations and how the ability to model instantaneous forces was incorporated into WEC-Sim. We then use a simplified one-body WEC device to validate the model and to demonstrate how accounting for these instantaneously calculated forces affects the accuracy of simulation results, such as device motions, hydrodynamic forces, and power generation.

13 HYDRO ENERGY↗

SU-D-BRF-06: A Brachytherapy Simulator with Realistic Haptic Force Feedback and Real-Time Ultrasounds Image Simulation for Training and Teaching

Purpose: Surgical procedures require dexterity, expertise and repetition to reach optimal patient outcomes. However, efficient training opportunities are usually limited. This work presents a simulator system with realistic haptic force-feedback and full, real-time ultrasounds image simulation. Methods: The simulator is composed of a custom-made Linear-DELTA force-feedback robotic platform. The needle tip is mounted on a force gauge at the end effector of the robot, which responds to needle insertion by providing reaction forces. 3D geometry of the tissue is using a tetrahedral finite element mesh (FEM) mimicking tissue properties. As the needle is inserted/retracted, tissue deformation is computed using a mass-tensor nonlinear visco-elastic FEM. The real-time deformation is fed to the L-DELTA to take into account the force imparted to the needle, providing feedback to the end-user when crossing tissue boundaries or needle bending. Real-time 2D US image is also generated synchronously showing anatomy, needle insertion and tissue deformation. The simulator is running on an Intel I7 6- core CPU at 3.26 MHz. 3D tissue rendering and ultrasound display are performed on a Windows 7 computer; the FEM computation and L-DELTA control are executed on a similar PC using the Neutrino real-time OS. Both machines communicate through an Ethernet link. Results: The system runs at 500 Hz for a 8333-tetrahedron tissue mesh and a 100-node angular spring needle model. This frame rate ensures a relatively smooth displacement of the needle when pushed or retracted (±20 N in all directions at speeds of up to 2 m/s). Unlike commercially-available haptic platforms, the oblong workspace of the L-DELTA robot complies with that required for brachytherapy needle displacements of 0.1m by 0.1m by 0.25m. Conclusion: We have demonstrated a real-life, realistic brachytherapy simulator developed for prostate implants (LDR/HDR). The platform could be adapted to other sites or training for other types of needle-based procedures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Pendellösung interferometry probes the neutron charge radius, lattice dynamics, and fifth forces

Setting bounds on a fifth force Some extensions to the Standard Model of particle physics posit the existence of a fifth force to complement the existing four fundamental forces. To set bounds on the strength of such an interaction, experiments on vastly different length scales have been performed. Heacock et al . used an unusual method called Pendellösung interferometry to measure the neutron structure factors of silicon. The momentum dependence of the structure factors enabled the researchers to put more stringent bounds on the strength of a type of fifth force called the Yukawa force, as well as measure the charge radius of the neutron. —JS

Science & Technology - Other Topics↗

Testing for the Possible Influence of Unknown Climate Forcings upon Global Temperature Increases from 1950-2000

Global-scale variations in the climate system over the last half of the twentieth century, including long-term increases in global-mean near-surface temperatures, are consistent with concurrent human-induced emissions of radiatively active gases and aerosols. However, such consistency does not preclude the possible influence of other forcing agents, including internal modes of climate variability or unaccounted for aerosol effects. To test whether other unknown forcing agents may have contributed to multidecadal increases in global-mean near-surface temperatures from 1950 to 2000, data pertaining to observed changes in global-scale sea surface temperatures and observed changes in radiatively active atmospheric constituents are incorporated into numerical global climate models. Results indicate that the radiative forcing needed to produce the observed long-term trends in sea surface temperatures—and global-mean near-surface temperatures—is provided predominantly by known changes in greenhouse gases and aerosols. Further, results indicate that less than 10% of the long-term historical increase in global-mean near-surface temperatures over the last half of the twentieth century could have been the result of internal climate variability. In addition, they indicate that less than 25%of the total radiative forcing needed to produce the observed long-term trend in global-mean near-surface temperatures could have been provided by changes in net radiative forcing from unknown sources (either positive or negative). These results, which are derived from simple energy balance requirements, emphasize the important role humans have played in modifying the global climate over the last half of the twentieth century.

Anderson, Bruce T↗