Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fixed orbits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

GeoNEX-SUBSETS: Geostationary Satellite Observations Over International Observing Network Sites

Satellite remote sensing is crucial for monitoring the Earth’s surface and for simulating global carbon and water cycles. Subsets of satellite data from sensors such as MODIS over established observing networks have been valuable for researchers for comparing the ground observed phenomena with satellite observations. Here, we introduce new subsets of the GeoNEX geostationary satellite datasets over locations of several ground observation networks. The NASA Earth Exchange group has been generating geostationary satellite products with our international partners and universities to cover the entire globe. In comparison to polar-orbiting satellite sensors such as MODIS, the new generation geostationary satellites observe target areas at a higher frequency (5-10 minutes), which also significantly increased the data volume. To reduce the burden of downloading and extracting geostationary time series data and provide easy access to the community, we provide subsets of GeoNEX products through our data portal [www.data.nas.nasa.gov]. The ready-to-use subset follows the same format as the MODIS fixed sites subset tools for users who are familiar with MODIS subset data and software. The selected networks include Fluxnet, AERONET, and Phenocam over the conterminous US. We demonstrate the usage of the GeoNEX fixed-site subset data and showcase thir advantages with three example studies. The first example is simulating the diurnal cycle of plant ecophysiology at Fluxnet sites. The high frequency of the GeoNEX time series allows us to run ecological models at sub-hour time steps and directly compare the simulated carbon and water fluxes with half-hourly Fluxnet data. The second example uses the geostationary data to track phenological changes. It highlights the high-frequent observations of geostationary satellites in helping mask cloud covers and capture the quick responses of vegetation to environmental changes. As such, these examples demonstrate the value of ready-to-use GeoNEX subsets data in terrestrial ecophysiology research.

GeoNEX↗

Progress at the interface of wave-function and density-functional theories

The Kohn-Sham (KS) potential of density-functional theory (DFT) emerges as the minimizing effective potential in a variational scheme that does not involve fixing the unknown single-electron density. Using Rayleigh Schroedinger (RS) perturbation theory (PT), we construct ab initio approximations for the energy difference, the minimization of which determines the KS potential directly - thereby bypassing DFT's traditional algorithm to search for the density that minimizes the total energy. From second-order RS PT, we obtain variationally stable energy differences to be minimized, solving the severe problem of variational collapse of orbital-dependent exchange-correlation functionals based on second-order RS PT.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Equivalence of ADM Hamiltonian and Effective Field Theory approaches at next-to-next-to-leading order spin1-spin2 coupling of binary inspirals

The next-to-next-to-leading order spin1-spin2 potential for an inspiralling binary, that is essential for accuracy to fourth post-Newtonian order, if both components in the binary are spinning rapidly, has been recently derived independently via the ADM Hamiltonian and the Effective Field Theory approaches, using different gauges and variables. Here we show the complete physical equivalence of the two results, thereby we first prove the equivalence of the ADM Hamiltonian and the Effective Field Theory approaches at next-to-next-to-leading order with the inclusion of spins. The main difficulty in the spinning sectors, which also prescribes the manner in which the comparison of the two results is tackled here, is the existence of redundant unphysical spin degrees of freedom, associated with the spin gauge choice of a point within the extended spinning object for its representative worldline. After gauge fixing and eliminating the unphysical degrees of freedom of the spin and its conjugate at the level of the action, we arrive at curved spacetime generalizations of the Newton-Wigner variables in closed form, which can also be used to obtain further Hamiltonians, based on an Effective Field Theory formulation and computation. Finally, we make use of our validated result to provide gauge invariant relations among the binding energy, angular momentum, and orbital frequency of an inspiralling binary with generic compact spinning components to fourth post-Newtonian order, including all known sectors up to date.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Building Operations Efficiencies into NASA's Ares I Crew Launch Vehicle Design

The U.S. Vision for Space Exploration guides the National Aeronautics and Space Administration s (NASA's) challenging missions that expand humanity s boundaries and open new routes to the space frontier. With the Agency's commitment to complete the International Space Station (ISS) and to retire the venerable Space Shuttle by 2010, the NASA Administrator commissioned the Exploration Systems Architecture Study (ESAS) in mid 2005 to analyze options for safe, simple, cost-efficient launch solutions that could deliver human-rated space transportation capabilities in a timely manner within fixed budget guidelines. The Exploration Launch Projects Office, chartered in October 2005, has been conducting systems engineering studies and business planning over the past few months to successively refine the design configurations and better align vehicle concepts with customer and stakeholder requirements, such as significantly reduced life-cycle costs. As the Agency begins the process of replacing the Shuttle with a new generation of spacecraft destined for missions beyond low-Earth orbit to the Moon and Mars, NASA is designing the follow-on crew and cargo launch systems for maximum operational efficiencies. To sustain the long-term exploration of space, it is imperative to reduce the $4.5 billion NASA typically spends on space transportation each year. This paper gives top-level information about how the follow-on Ares I Crew Launch Vehicle (CLV) is being designed for improved safety and reliability, coupled with reduced operations costs.

Dumbacher, Daniel↗

Building Operations Efficiencies into NASA's Ares I Crew Launch Vehicle Design

The U.S. Vision for Space Exploration guides the National Aeronautics and Space Administration's (NASA's) challenging missions that expand humanity's boundaries and open new routes to the space frontier. With the Agency's commitment to complete the International Space Station (ISS) and to retire the venerable Space Shuttle by 2010, the NASA Administrator commissioned the Exploration Systems Architecture Study (ESAS) in 2005 to analyze options for safe, simple, cost-efficient launch solutions that could deliver human-rated space transportation capabilities in a timely manner within fixed budget guidelines. The Exploration Launch Projects (ELP) Office, chartered by the Constellation Program in October 2005, has been conducting systems engineering studies and business planning to successively refine the design configurations and better align vehicle concepts with customer and stakeholder requirements, such as significantly reduced life-cycle costs. As the Agency begins the process of replacing the Shuttle with a new generation of spacecraft destined for missions beyond low-Earth orbit to the Moon and Mars, NASA is designing the follow-on crew and cargo launch systems for maximum operational efficiencies. To sustain the long-term exploration of space, it is imperative to reduce the $4 billion NASA typically spends on space transportation each year. This paper gives toplevel information about how the follow-on Ares I Crew Launch Vehicle (CLV) is being designed for improved safety and reliability, coupled with reduced operations costs. These methods include carefully developing operational requirements; conducting operability design and analysis; using the latest information technology tools to design and simulate the vehicle; and developing a learning culture across the workforce to ensure a smooth transition between Space Shuttle operations and Ares vehicle development.

Dumbacher, Daniel L.↗

EFFICIENT SOLUTION OF INITIAL-VALUE PROBLEM OF TORQUE-FREE ROTATION

We present an efficient solution of the initial-value problem of the torque-free rotation of a triaxial rigid body in a complete manner. The solution transforms, by means of a transition matrix, the coordinate triad attached to the rotating body as well as the body-fixed components of the rotational angular momentum vector from their initial values to the values at an arbitrary time. The transition matrix is expressed as one rotation matrix sandwiched by two wobble matrices. Their computation is significantly accelerated by (1) the rewriting of wobble matrices in terms of the body-fixed components of rotational angular momentum, (2) the evaluation of elliptic functions by addition theorems, and (3) the utilization of Maclaurin series expansion in computing various kinds of transcendental functions including the incomplete elliptic integral of the third kind for small arguments. The resulting formulation is a counterpart, in rotational dynamics, of the method of the so-called f- and g-functions to solve the initial-value problem of a Keplerian orbit efficiently.

79 ASTRONOMY AND ASTROPHYSICS↗

A dawn-to-dusk electric field in the Jovian magnetosphere

It is shown that if Io-injected plasma is lost via a planetary wind a sun-fixed Birkeland current system may result. This is due to the fact that a current flows across a density gradient produced by the loss of plasma through the planetary wind in the tail. The divergent current is connected to field-aligned Birkeland currents which flow into the ionosphere at dawn and out of it at dusk. The closure currents in the ionosphere require a dawn-to-dusk electric field which at the orbit of Io is estimated to have a strength of a few mV/m. Independent estimates derived from the local time asymmetry of the torus u.v. emission indicate a field of 1.5 mV/m.

Ip, W.-H.↗

Super-Low-Mass Spaceborne SAR Array Concepts

For Earth remote sensing applications, a synthetic aperture radar (SAR) typically employs an antenna with a fairly long along-track aperture in order to achieve the desired performance. At orbital velocities, the antenna along-track dimension is driven by a careful trade off between resolution, swath width, and available data rate and is independent of wavelength. 10 to 20 m long antennas have been flown or proposed in previous spaceborne SAR designs. To maintain an acceptable electrical flatness across this long aperture, very massive antenna support structures, weighing several hundred kilograms or more, have been used to date. For example, the fixed-beam L-band SeaSat antenna, which used a microstrip array with honeycomb substrate, had a mass of 250 Kg (including deployment mechanism). The beam-scanning L/C/X-band shuttle-based SIR-C antenna has a mass of l,800 Kg. These massive antenna systems generally require a launch vehicle with large stowage volume and heavy-payload-lift capability. To achieve good launch volume efficiency and to reduce payload weight, three super-low-mass array concepts are proposed and described here. With these new concepts, the mass of the future Earth remote sensing SAR antennas is expected to be less than 100 Kg.

Huang, J.↗

Micro-Vibration Measurements on Thermally Loaded Multi-Layer Insulation Samples in Vacuum

Some scientific missions require to an extreme extent the absence of any on-board microvibration. Recent projects dedicated to measuring the Earth's gravity field and modeling the geoid with extremely high accuracy are examples. Their missions demand for extremely low micro-vibration environment on orbit for: (1) Not disturbing the measurement of earth gravity effects with the installed gradiometer or (2) Even not damaging the very high sensitive instruments. Based on evidence from ongoing missions multi-layer insulation (MLI) type thermal control blankets have been identified as a structural element of spacecrafts which might deform under temperature variations being caused by varying solar irradiation in orbit. Any such deformation exerts tiny forces which may cause small reactions resulting in micro-vibrations, in particular by exciting the spacecraft eigenmodes. The principle of the test set-up for the micro-vibration test was as follows. A real side wall panel of the spacecraft (size about 0.25 m2) was low-frequency suspended in a thermal vacuum chamber. On the one side of this panel, the MLI samples were fixed by using the standard methods. In front of the MLI, an IR-rig was installed which provided actively controlled IR-radiation power of about 6 kW/m2 in order to heat the MLI surface. The cooling was passive using the shroud temperature at a chamber pressure <1E-5mbar. The resulting micro-vibrations due to MLI motion in the heating and the cooling phase were measured via seismic accelerometers which were rigidly mounted to the panel. Video recording was used to correlate micro-vibration events to any visual MLI motion. Different MLI sample types were subjected to various thermal cycles in a temperature range between -60 C to +80 C. In this paper, the experience on these micro-vibration measurements will be presented and the conclusions for future applications will be discussed

Deutsch, Georg↗

Evaluation of the Validated Soil Moisture Product from the SMAP Radiometer

NASA's Soil Moisture Active Passive (SMAP) mission launched on January 31, 2015 into a sun-synchronous 6 am/6 pm orbit with an objective to produce global mapping of high-resolution soil moisture and freeze-thaw state every 2-3 days using an L-band (active) radar and an L-band (passive) radiometer. The SMAP radiometer began acquiring routine science data on March 31, 2015 and continues to operate nominally. SMAP's radiometer-derived soil moisture product (L2_SM_P) provides soil moisture estimates posted on a 36 km fixed Earth grid using brightness temperature observations from descending (6 am) passes and ancillary data. A beta quality version of L2_SM_P was released to the public in September, 2015, with the fully validated L2_SM_P soil moisture data expected to be released in May, 2016. Additional improvements (including optimization of retrieval algorithm parameters and upscaling approaches) and methodology expansions (including increasing the number of core sites, model-based intercomparisons, and results from several intensive field campaigns) are anticipated in moving from accuracy assessment of the beta quality data to an evaluation of the fully validated L2_SM_P data product.

Ocean Salinity↗

Orion Optical Navigation Progress Toward Exploration: Mission 1

Optical navigation of human spacecraft was proposed on Gemini and implemented successfully on Apollo as a means of autonomously operating the vehicle in the event of lost communication with controllers on Earth. It shares a history with the "method of lunar distances" that was used in the 18th century and gained some notoriety after its use by Captain James Cook during his 1768 Pacific voyage of the HMS Endeavor. The Orion emergency return system utilizing optical navigation has matured in design over the last several years, and is currently undergoing the final implementation and test phase in preparation for Exploration Mission 1 (EM-1) in 2019. The software development is being worked as a Government Furnished Equipment (GFE) project delivered as an application within the Core Flight Software of the Orion camera controller module. The mathematical formulation behind the initial ellipse fit in the image processing is detailed in Christian. The non-linear least squares refinement then follows the technique of Mortari as an estimation process of the planetary limb using the sigmoid function. The Orion optical navigation system uses a body fixed camera, a decision that was driven by mass and mechanism constraints. The general concept of operations involves a 2-hour pass once every 24 hours, with passes specifically placed before all maneuvers to supply accurate navigation information to guidance and targeting. The pass lengths are limited by thermal constraints on the vehicle since the OpNav attitude generally deviates from the thermally stable tail-to-sun attitude maintained during the rest of the orbit coast phase. Calibration is scheduled prior to every pass due to the unknown nature of thermal effects on the lens distortion and the mounting platform deformations between the camera and star trackers. The calibration technique is described in detail by Christian, et al. and simultaneously estimates the Brown-Conrady coefficients and the Star Tracker/Camera interlock angles. Accurate attitude information is provided by the star trackers during each pass. Figure 1 shows the various phases of lunar return navigation when the vehicle is in autonomous operation with lost ground communication. The midcourse maneuvers are placed to control the entry interface conditions to the desired corridor for safe landing. The general form of optical navigation on Orion is where still images of the Moon or Earth are processed to find the apparent angular diameter and centroid in the camera focal plane. This raw data is transformed into range and bearing angle measurements using planetary data and precise star tracker inertial attitude. The measurements are then sent to the main flight computer's Kalman filter to update the onboard state vector. The images are, of course, collected over an arc to converge the state and estimate velocity. The same basic technique was used by Apollo to satisfy loss-of-comm, but Apollo used manual crew sightings with a vehicle-integral sextant instead of autonomously processing optical imagery. The software development is past its Critical Design Review, and is progressing through test and certification for human rating. In support of this, a hardware-in-the-loop test rig was developed in the Johnson Space Center Electro-Optics Lab to exercise the OpNav system prior to integrated testing on the Orion vehicle. Figure 2 shows the rig, which the test team has dubbed OCILOT (Orion Camera In the Loop Optical Testbed). Analysis performed to date shows a delivery that satisfies an allowable entry corridor as shown in Figure 3.

Holt, Greg N.↗

Muon Acceleration with RLA and Non-scaling FFAG Arcs

Recirculating Linear Accelerators (RLA) are the most likely means to achieve the rapid acceleration of shortlived muons to multi-GeV energies required for Neutrino Factories and TeV energies required for Muon Colliders. In this paper, we present a novel return-arc optics design based on a Non Scaling Fixed Field Alternating Gradient (NS-FFAG) lattice that allows 5 and 9 GeV/c muons of both charges to be transported in the same string of magnets. The return arcs are made up of super cells with each super cell consisting of three triplets. By employing combined function magnets with dipole, quadrupole, sextupole and octupole magnetic field components, each super cell is designed to be achromatic and to have zero initial and final periodic orbit offsets for both 5 and 9 GeV/c muon momenta. This solution would reduce the number of arcs by a factor of 2, simplifying the overall design.

43 PARTICLE ACCELERATORS↗

Muon acceleration with RLA and non-scaling FFAG ARCS

Recirculating Linear Accelerators (RLA) are the most likely means to achieve the rapid acceleration of short-lived muons to multi-GeV energies required for Neutrino Factories and TeV energies required for Muon Colliders. In this paper, we present a novel return-arc optics design based on a Non Scaling Fixed Field Alternating Gradient (NS-FFAG) lattice that allows 5 and 9 GeV/c muons of both charges to be transported in the same string of magnets. The return arcs are made up of super cells with each super cell consisting of three triplets. By employing combined function magnets with dipole, quadrupole, sextupole and octupole magnetic field components, each super cell is designed to be achromatic and to have zero initial and final periodic orbit offsets for both 5 and 9 GeV/c muon momenta. This solution would reduce the number of arcs by a factor of 2, simplifying the overall design.

43 PARTICLE ACCELERATORS↗

Spectroscopic binary orbits from ultraviolet radial velocities. X - CW Cephei (HD 218066)

Observations of CW Cephei were carried out repeatedly in the course of three days in December 1991, using the high-resolution, short-wavelength spectrograph of IUE, with an additional spectrum taken on February 6, 1992. The paper presents a log of these observations, which represent the only high-resolution observations of this star in the archive. The observations have an advantage of Popper's (1974) optical observations that they do not stretch out over a significant part of the apsidal cycle and can thus be treated with the value of omega taken as fixed.

Stickland, D. J.↗

The issue of gauge choice in the Landau problem and the physics of canonical and mechanical orbital angular momenta

One intriguing issue in the nucleon spin decomposition problem is the existence of two types of decompositions, which are representably characterized by two different orbital angular momenta (OAMs) of quarks. The one is the mechanical OAM, while the other is the so-called gauge-invariant canonical (g.i.c.) OAM, the concept of which was introduced by Chen et al. An especially delicate quantity is the g.i.c. OAM, which must be distinguished from the ordinary (gauge-variant) canonical OAM. We find that, owing to its analytically solvable nature, the famous Landau problem offers an ideal tool to understand the difference and the physical meaning of the above three OAMs, i.e. the standard canonical OAM, g.i.c. OAM, and the mechanical OAM. We analyze these three OAMs in two different formulations of the Landau problem, first in the standard (gauge-fixed) formulation and second in the gauge-invariant (but path-dependent) formulation of DeWitt. Especially interesting is the latter formalism. It is shown that the choice of path has an intimate connection with the choice of gauge, but they are not necessarily equivalent. Then, we answer the question about what is the consequence of a particular choice of path in DeWitt’s formalism. This analysis also clarifies the implication of the gauge symmetry hidden in the concept of g.i.c. OAM. Finally, we show that the finding above offers a clear understanding about the uniqueness or non-uniqueness problem of the nucleon spin decomposition, which arises from the arbitrariness in the definition of the so-called physical component of the gauge field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab initio electron-phonon interactions using atomic orbital wave functions

The interaction among electrons and lattice vibrations determines key physical properties of materials, including their electrical and heat transport, excited electron dynamics, phase transitions, and superconductivity. We present an ab initio method that employs atomic orbital (AO) wave functions to compute the electron-phonon (e-ph) interactions in materials and interpolate the e-ph coupling matrix elements to fine Brillouin zone grids. We illustrate the numerical implementation of such AO-based e-ph calculations, and benchmark them against direct density functional theory calculations and Wannier function (WF) interpolation. The prime advantages of AOs over WFs for e-ph calculations are outlined. Since AOs are fixed basis functions associated with the atoms, they circumvent the need to generate a material-specific localized basis set with a trial-and-error approach, as is needed in WFs. Therefore, AOs are ideal to compute e-ph interactions in chemically and structurally complex materials for which WFs are challenging to generate, and are also promising for high-throughput materials discovery. Although our findings focus on AOs, the formalism we present generalizes e-ph calculations to arbitrary localized basis sets, with WFs recovered as a special case.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Review of delta wing space shuttle vehicle dynamics

The unsteady aerodynamics of the proposed delta planform, high cross range, shuttle orbiters, are investigated. It is found that these vehicles are subject to five unsteady-flow phenomena that could compromise the flight dynamics. The phenomena are as follows: (1) leeside shock-induced separation, (2) sudden leading-edge stall, (3) vortex burst, (4)bow shock-flap shock interaction, and (5) forebody vorticity. Trajectory shaping is seen as the most powerful means of avoiding deterimental effects of the stall phenomena; however, stall must be fixed or controlled when traversing the stall region. Other phenomana may be controlled by carefully programmed control deflections and some configuration modifications. Ways to alter the occurrence of the various flow conditions are explored.

Reding, J. P.↗

Approximations to the mean surface of Mars and Mars atmosphere using Mariner 9 occultations

When the Mariner 9 spacecraft passed behind Mars in its orbiting phase, the radio beam was cut off by some physical feature. These occultations occurred during the months of November and December 1971 and again in April and May 1972. The fairly good global spread of these data was used to estimate the shape of the Martian globe, as definable by mathematical shapes (ellipsoidal and spherical harmonic). The refraction profiles allowed the estimation of pressure near the occultation point; these, corrected back to an arbitrary fixed value of pressure, chosen to be 6.1 mb, were used as radii to an isobaric surface. Preliminary results showed a figure displacement from the mass center with a best fit southeast by 2.85 km. There was also an equatorial displacement in the direction of about 100 deg W. Atmospheric approximations for the mass center to 6.1-mb pressure distances were fit to an ellipsoid.

Cain, D. L.↗