Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “explainable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Filament Formation in TaO x Thin Films for Memristor Device Application: Modeling Electron Energy Loss Spectra and Electron Transport

Abstract Although understanding filament formation in oxide‐based memristive devices by theory has emerged, there are still fundamental unanswered questions. Importantly, for practical application of thin films the material in its amorphous state is to be considered, but mostly lacking so far, and details on sub‐stoichiometry are also scarce. To gain insight into the optical and electronic properties of sub‐stoichiometric amorphous tantalum oxide (TaO x ), the electron energy loss spectrum (EELS) of model systems is characterized theoretically and electron transport characteristics are analyzed in detail. Calculated blue‐shifts by increasing sub‐stoichiometry explained the measurements, potentially suggesting estimation of oxygen vacancy concentrations through EEL spectra. Electron transport results based on TaO x material models validated by EELS measurements show that oxygen vacancy filamentary paths are initiated at low bias upon increasing sub‐stoichiometry yet noting an interplay with the local amorphous structure. Contact resistances at interfaces of the TaO x switching layer and a tantalum scavenging layer or titanium nitride electrode are quantified, indicating the possibility for either oxygen vacancy‐ or metal cluster‐based conduction mechanisms at the interface. The computational work, combined with experimental characterization for validation, provides a basis for investigating effects of sub‐stoichiometry on filament formation in TaO x thin film memristive devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Experimental and Theoretical Studies of the Surface Oxidation Process of Rare–Earth Tritellurides

Recent studies have established Van der Waals (vdW) layered and 2D rare-earth tritellurides (RTe 3 ) as superconductors and near room-temperature charge density wave (CDW) materials. Their environmental stability raises natural concern owing to aging/stability effects observed in other tellurium-based layered crystals. Here, the results establish the stability and environmental aging characteristics of these RTe 3 systems involving a variety of metals such as La, Nd, Sm, Gd, Dy, and Ho. The atomic force microscopy (AFM) and scanning electron microscopy (SEM) results show that all the RTe 3 sheets oxidize to form thin TeO x layers that are primarily confined to the surface, edges, and grain boundaries. Time-resolved in situ Raman spectroscopy measurements are used to understand the kinetics of the oxidization process for different lanthanide metal cations and establish their relative stability/resilience to oxidization. Overall results indicate that the vdW layers show higher air stability as the 4f electron number decreases going from Ho to La, resulting in the most stable LaTe 3 compared to the least stable HoTe 3 . Comprehensive quantum mechanical simulations reveal that environmental degradation originates from a strong oxidizing reaction with O 2 molecules, while humidity (H 2 O) plays a negligible role unless Te vacancies are present. Moreover, the simulations explain the effects of 4f electrons on the work function and Te vacancies formation, which directly impact the aging characteristics of RTe 3 layers. Interestingly, optical and electrical measurements show that the CDW response is still observed in aged RTe 3 layers owing to the presence of underlying pristine/nonoxidized RTe 3 layers, except CDW transition temperatures increase due to the thickness effect. Overall results offer the first in-depth environmental aging studies on these materials, which can be applied to engineer and design their chemical stability, surface properties, and overall CDW characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Photoinduced Melting of V 4 O 7 Correlated State

The compound V 4 O 7 is one of the Magnéli phase (V n O 2n - 1 , n = 3, 4, …, 9) correlated vanadium oxides with distinct intriguing electronic and structural properties. The possibility to manipulate the phase state of V 4 O 7 on an ultrafast time scale by light makes this material promising for potential applications in photonics, optoelectronics, quantum, and neuromorphic circuit design. In this work, the ultrafast spectroscopy of V 4 O 7 reveals the second-order nature of the photoinduced insulator-to-metal transition, emphasizing electronic and lattice contributions. The findings reveal the influence of the laser excitation level and temperature on these dynamics, providing a comprehensive understanding of V 4 O 7 structural changes and response to external stimuli. The phenomenological model based on the Landau–Ginzburg formalism provides a robust framework for explaining the photoinduced transition dynamics, showing a detailed picture of the light interaction with the electronic and lattice subsystems. This integrated approach significantly enhances the understanding of V 4 O 7 complex behavior upon photoexcitation, opening new possibilities for developing new optoelectronic devices and noninvasive optical control of the phase transition pathways in vanadates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Strain Fluctuations Unlock Ferroelectricity in Wurtzites

Ferroelectrics are of practical interest for non-volatile data storage due to their reorientable, crystallographically defined polarization. Yet efforts to integrate conventional ferroelectrics into ultrathin memories have been frustrated by film-thickness limitations, which impede polarization reversal under low applied voltage. Wurtzite materials, including magnesium-substituted zinc oxide (Zn,Mg)O, have been shown to exhibit scalable ferroelectricity as thin films. In this work, the origins of ferroelectricity in (Zn,Mg)O are explained, showing that large strain fluctuations emerge locally in (Zn,Mg)O and can reduce local barriers to ferroelectric switching by more than 40%. Concurrent experimental and computational evidence of these effects are provided by demonstrating polarization switching in ZnO/(Zn,Mg)O/ZnO heterostructures featuring built-in interfacial strain gradients. These results open up an avenue to develop scalable ferroelectrics by controlling strain fluctuations atomistically.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interactions Enhance Ramp Reversal Memory in Locally Phase Separated Materials

The ramp-reversal memory (RRM) effect in metal–insulator transition metal oxides (TMOs), a non-volatile resistance change induced by repeated temperature cycling, has attracted considerable interest in neuromorphic computing and non-volatile memory devices. Our previous defect motion model successfully explained RRM in vanadium dioxide (VO 2 ), capturing observed critical temperature shifts and memory accumulation throughout the sample. However, this approach lacked interactions between metallic and insulating domains. Here, we extend our model by combining a correlated Random Field Ising Model with defect diffusion-segregation, enabling accurate hysteresis modeling while predicting the relationship between RRM and domain interactions. Our simulations demonstrate that the maximum RRM occurs when the turnaround temperature approaches the inflection point. This peak in RRM vs. turnaround temperature is consistent with prior transport measurements, as well as our own optical measurements reported here. Significantly, we find that increasing nearest-neighbor interactions enhances the maximum memory effect, thus providing a clear mechanism for optimizing RRM performance. Since our model employs minimal assumptions, we predict that RRM should be a widespread phenomenon in materials exhibiting patterned phase coexistence of electronic domains. This work not only advances fundamental understanding of memory behavior in TMOs but also establishes a much-needed theoretical framework for optimizing device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Surface Energy Modulated Self‐Assembly of Percolative Gallium Nanodroplet Films for Stretchable Electronics

Advancements in soft robotics and wearable technologies have led to an increased need for flexible and stretchable electronic systems. Liquid metals like Gallium (Ga) and its alloys offer high potential in the field of stretchable electronics and photonics due to their inherent high conductivity and malleability. However, their high surface tension and native oxide formation hinder uniform wetting and continuous film formation to get conducting films. Here, we report a fabrication strategy to realize electrically conductive Ga thin films with effective thicknesses around 100 nm on polymeric and elastomeric substrates. By enhancing the surface energy of the elastomer, we create uniform Ga nanodroplets capable of sustaining stretchability up to 200% strain. Our devices exhibit electronic conduction primarily through tunneling and display strain tunable piezoresistive characteristics, which are explained using Kirchhoff's resistive network and Simmon's analytical tunneling current model. To showcase the device's capability in fields of stretchable electronics, we demonstrate several functional prototypes, including flexible devices integrated with Light Emitting Diodes (LEDs), curvature and pressure sensors, and soft robotic grippers capable of sensing object curvature. The demonstrated devices highlight the potential of this approach for scalable integration of stretchable electronics in soft robotic and wearable platforms.

42 ENGINEERING↗
DOE OSTI2020

High Capacity Adsorption—Dominated Potassium and Sodium Ion Storage in Activated Crumpled Graphene

In this study, structurally and chemically defective activated-crumbled graphene (A-CG) is employed to achieve unique synergy of large reversible potassium (K) and sodium (Na) ion storage capacity with fast charging and extended cyclability. A-CG synthesis consists of low temperature spraying of graphene oxide slurry, followed by partial reduction annealing and air activation. For K storage, the reversible capacities are 340 mAh g -1 at 0.04 A g -1 , 261 mAh g -1 at 0.5 A g -1 , and 210 mAh g -1 at 2 A g -1 . For Na storage, the reversible capacities are 280 mAh g -1 at 0.04 A g -1 , 191 mAh g -1 at 0.5 A g -1 , and 151 mAh g -1 at 2 A g -1 . A-CG shows a stable intermediate rate (0.5 Ag -1 ) cycling with both K and Na, with minimal fade after 2800 and 8000 cycles. These are among the most favorable capacity—rate capability—cyclability combinations recorded for potassium-ion battery and sodium-ion battery carbons. Electroanalytical studies (cyclic voltammetry, galvanostatic intermittent titration technique, b -value) and density functional theory (DFT) reveal that enhanced electrochemical performance originates from ion adsorption at various defects, such as Stone–Wales defects. Moreover, DFT highlights enhanced thermodynamic stability of A-CG with adsorbed K versus with adsorbed Na, explaining the unexpected higher reversible capacity with the former.

25 ENERGY STORAGE↗
DOE OSTI2020

Direct Observation of Alternating Octahedral and Prismatic Sodium Layers in O3-Type Transition Metal Oxides

The oxygen stacking of O3-type layered sodium transition metal oxides (O3-NaTMO 2 ) changes dynamically upon topotactic Na extraction and reinsertion. While the phase transition from octahedral to prismatic Na coordination that occurs at intermediate desodiation by transition metal slab gliding is well understood, the structural evolution at high desodiation, crucial to achieve high reversible capacity, remains mostly uncharted. In this work, the phase transitions of O3-type layered NaTMO 2 at high voltage are investigated by combining experimental and computational approaches. An OP2-type phase that consists of alternating octahedral and prismatic Na layers is directly observed by in situ X-ray diffraction and high-resolution scanning transmission electron microscopy. The origin of this peculiar phase is explained by atomic interactions involving Jahn–Teller active Fe 4+ and distortion tolerant Ti 4+ that stabilize the local Na environment. Finally, the path-dependent desodiation and resodiation pathways are also rationalized in this material through the different kinetics of the prismatic and octahedral layers, presenting a comprehensive picture about the structural stability of the layered materials upon Na intercalation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Exploring the Interface of Skin-Layered Titanium Fibers for Electrochemical Water Splitting

Water electrolysis is the key to a decarbonized energy system, as it enables the conversion and storage of renewably generated intermittent electricity in the form of hydrogen. However, reliability challenges arising from titanium-based porous transport layers (PTLs) have hitherto restricted the deployment of next-generation water-splitting devices. Here, it is shown for the first time how PTLs can be adapted so that their interface remains well protected and resistant to corrosion across ˜4000 h under real electrolysis conditions. It is also demonstrated that the malfunctioning of unprotected PTLs is a result triggered by additional fatal degradation mechanisms over the anodic catalyst layer beyond the impacts expected from iridium oxide stability. Now, superior durability and efficiency in water electrolyzers can be achieved over extended periods of operation with less-expensive PTLs with proper protection, which can be explained by the detailed reconstruction of the interface between the different elements, materials, layers, and components presented in this work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Disorder Dynamics in Battery Nanoparticles During Phase Transitions Revealed by Operando Single-Particle Diffraction

Structural and ion-ordering phase transitions limit the viability of sodium-ion intercalation materials in grid scale battery storage by reducing their lifetime. However, the combination of phenomena in nanoparticulate electrodes creates complex behavior that is difficult to investigate, especially on the single-nanoparticle scale under operating conditions. In this work, operando single-particle X-ray diffraction (oSP-XRD) is used to observe single-particle rotation, interlayer spacing, and layer misorientation in a functional sodium-ion battery. oSP-XRD is applied to Na 2/3 [Ni 1/3 Mn 2/3 ]O 2 , an archetypal P2-type sodium-ion-positive electrode material with the notorious P2-O2 phase transition induced by sodium (de)intercalation. Here, it is found that during sodium extraction, the misorientation of crystalline layers inside individual particles increases before the layers suddenly align just prior to the P2-O2 transition. The increase in the long-range order coincides with an additional voltage plateau signifying a phase transition prior to the P2-O2 transition. To explain the layer alignment, a model for the phase evolution is proposed that includes a transition from localized to correlated Jahn-Teller distortions. The model is anticipated to guide further characterization and engineering of sodium-ion intercalation materials with P2-O2 type transitions. oSP-XRD, therefore, opens a powerful avenue for revealing complex phase behavior in heterogeneous nanoparticulate systems.

25 ENERGY STORAGE↗
DOE OSTI2023

Observation of Weak Counterion Size Dependence of Thermoelectric Transport in Ion Exchange Doped Conducting Polymers Across a Wide Range of Conductivities

Conducting polymers are of interest for a broad range of applications from bioelectronics to thermoelectrics. The factors that govern their complex charge transport physics include the structural disorder present in these highly doped polymer films and the Coulombic interactions between the electronic charge carriers and the dopant counterions. Previous studies have shown that at low doping levels carriers are strongly trapped in the vicinity of the counterions, while at high doping levels charge transport is not limited by Coulombic trapping, which manifests itself in the conductivity being independent of the size of the dopant counterion. Here a recently developed ion exchange doping method is used to investigate the ion size dependence of a semicrystalline polythiophene–based model system across a wide range of conductivities. It is found that the regime in which the charge and thermoelectric transport is not or only weakly dependent on ion size, extends to surprisingly low conductivities. This surprising observation is explained by a heterogeneous doping that involves doping of the amorphous domains to high doping levels first before doping of the ordered, crystalline domains occurs. The study provides new insights into how the thermoelectric physics of conducting polymers evolves as a function of doping level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrahigh-Capacity Rocksalt Cathodes Enabled by Cycling-Activated Structural Changes

Mn-redox-based oxides and oxyfluorides are considered the most promising earth-abundant high-energy cathode materials for next-generation lithium-ion batteries. While high capacities are obtained in high-Mn content cathodes such as Li- and Mn-rich layered and spinel-type materials, local structure changes and structural distortions ( often lead to voltage fade, capacity decay, and impedance rise, resulting in unacceptable electrochemical performance upon cycling. In the present study, structural transformations that exploit the high capacity of Mn-rich oxyfluorides while enabling stable cycling, in stark contrast to commonly observed structural changes that result in rapid performance degradation, are reported. Here, it is shown that upon cycling of a cation-disordered rocksalt (DRX) cathode (Li 1.1 Mn 0.8 Ti 0.1 O 1.9 F 0.1 , an ultrahigh capacity of ≈320 mAh g –1 (energy density of ≈900 Wh kg –1 ) can be obtained through dynamic structural rearrangements upon cycling , along with a unique voltage profile evolution and capacity rise. At high voltage, the presence of Mn 4+ and Li + vacancies promotes local cation ordering, leading to the formation of domains of a “δ phase” within the disordered framework. On deep discharge, Mn 4+ reduction, along with Li + insertion transform the structure to a partially ordered DRX phase with a β'-LiFeO 2 -type arrangement. At the nanoscale, domains of the in situ formed phases are randomly oriented, allowing highly reversible structural changes and stable electrochemical cycling. These new insights not only help explain the superior electrochemical performance of high-Mn DRXbut also provide guidance for the future development of Mn-based, high-energy density oxide, and oxyfluoride cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2024

The Microscopic Mechanism of Lithiation and Delithiation in the Ag/C Buffer Layer for Anode‐Free Solid‐State Batteries

Abstract Lithium metal solid‐state batteries (LMSSBs) have demonstrated their high energy density and cycling performance at high current densities in an anode‐free architecture, featuring a thin Ag/C composite buffer layer (BL) between the current collector (CC) and the solid electrolyte (SE). This study explains the microscopic mechanism of the Ag/C BL by using first‐principles atomistic and continuum modeling. It is shown that Ag effectively acts as a homogeneous solid‐solution beyond AgLi 2.32 and maintains a positive potential even at AgLi 25 during lithiation. Key factors underlying the working of the Ag/C BL include lower interfacial resistance at the BL/CC interface than at the BL/SE interface, leading to predominant Li deposition on BL/CC, and substantial Ag–Li volume expansion during lithiation. This, combined with stronger BL/SE adhesion, causes BL/SE separation and Ag–Li extrusion toward the CC side. During delithiation, Ag re‐precipitates as nanoparticles uniformly on the CC, with its positive lithiation potential homogenizing Li currents in subsequent cycles. Other metals are less effective due to their relatively large overpotential, premature lithiation termination, and limited volume expansions hindering movement toward the CC. The study aids the BL design, focusing on metal choice and optimization material and microstructural properties, such as the Li‐ion conductivity and interfacial resistance.

25 ENERGY STORAGE↗
DOE OSTI2024

High‐Rate Polymeric Redox in MXene‐Based Superlattice‐Like Heterostructure for Ammonium Ion Storage

Abstract Achieving both high redox activity and rapid ion transport is a critical and pervasive challenge in electrochemical energy storage applications. This challenge is significantly magnified when using large‐sized charge carriers, such as the sustainable ammonium ion (NH 4 + ). A self‐assembled MXene/n‐type conjugated polyelectrolyte (CPE) superlattice‐like heterostructure that enables redox‐active, fast, and reversible ammonium storage is reported. The superlattice‐like structure persists as the CPE:MXene ratio increases, accompanied by a linear increase in the interlayer spacing of MXene flakes and a greater overlap of CPEs. Concurrently, the redox activity per unit of CPE unexpectedly intensifies, a phenomenon that can be explained by the enhanced de‐solvation of ammonium due to the increased volume of 3 Å‐sized pores, as indicated by molecular dynamic simulations. At the maximum CPE mass loading (MXene:CPE ratio = 2:1), the heterostructure demonstrates the strongest polymeric redox activity with a high ammonium storage capacity of 126.1 C g −1 and a superior rate capability at 10 A g −1 . This work unveils an effective strategy for designing tunable superlattice‐like heterostructures to enhance redox activity and achieve rapid charge transfer for ions beyond lithium.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Miscanthus × giganteus increases soil maximum water holding capacity compared to maize

Soil ecosystem services, like the ability to store water, have been depleted after a century of conventional, annual cropping, and perennial crops offer a solution to this and other agricultural environmental issues. We assessed the impact of Miscanthus × giganteus (miscanthus), a perennial biomass crop, on soil water holding capacity and structure compared to continuous maize (Zea mays L.) at two sites in Iowa. After three growing seasons, we measured the following: (1) maximum water holding capacity (MWHC) with and without soil structure, and (2) total porosity and pore size distribution (PSD) via micro-computed tomography (microCT). Miscanthus increased MWHC by 14.7% across both sites relative to maize (p = 0.002), and we attributed this to structural changes due to the lack of a crop effect when measured on structureless soils. No significant changes were detected in soil organic matter, texture, total porosity, or PSD that could explain the increase in MWHC under miscanthus. Our findings suggest that the increases in MWHC are primarily due to structural changes rather than increases in soil organic matter or porosity (at least porosity detectable by microCT). This study highlights miscanthus' potential to enhance soil water storage and underscores the need for further investigation to clarify the mechanisms through which this biomass crop influences soil structural properties.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Molecular fingerprint and machine learning to accelerate design of high-performance homochiral metal–organic frameworks

In this report computational screening was employed to calculate the enantioseparation capabilities of 45 functionalized homochiral metal–organic frameworks (FHMOFs), and machine learning (ML) and molecular fingerprint (MF) techniques were used to find new FHMOFs with high performance. With increasing temperature, the enantioselectivities for (R,S)-1,3-dimethyl-1,2-propadiene are improved. The “glove effect” in the chiral pockets was proposed to explain the correlations between the steric effect of functional groups and performance of FHMOFs. Moreover, the neighborhood component analysis and RDKit/MACCS MFs show the highest predictive effect on enantioselectivities among the four ML classification algorithms with nine MFs that were tested. Based on the importance of MF, 85 new FHMOFs were designed, and a newly designed FHMOF, NO 2 -NHOH-FHMOF, with high similarity to the optimal MFs achieved improved chiral separation performance, with enantioselectivities of 85%. The design principles and new chiral pockets obtained by ML and MFs could facilitate the development of new materials for chiral separation.

molecular fingerprint↗
DOE OSTI2025

Structure–property relationships of reduced graphene oxide membranes intercalated with polycyclic aromatics

Graphene oxide (GO) membranes intercalated with various organic moieties have shown excellent potential for a range of water processing applications. However, microstructure–functional property relationships in these structurally disordered membranes are not well understood. We demonstrate a practical methodology for developing such relationships for GO membranes intercalated with molecular species, with polycyclic aromatic toluidine blue O (TBO) as an example functional intercalant. We use solid-state UV–vis absorbance and fluorescence measurements to quantitatively track the arrangements of TBO in a series of TBO-loaded reduced GO (rGO) membranes. This study reveals the evolution of diverse arrangements including TBO monomers, lateral and stacked dimers, and other aggregates, as a function of overall TBO loading. These microstructures are then correlated to changes in overall properties such as interlayer d-spacings, permeate fluxes, and solute rejections. The characterization of these different intercalant microstructures explains non-intuitive flux and rejection trends, which can circumvent flux and solute rejection trade-offs.

02 PETROLEUM↗
DOE OSTI2026

Comparison of DeePMD, MTP, GAP, ACE and MACE Machine‐Learned Potentials for Radiation‐Damage Simulations: A User Perspective

Accurate and efficient interatomic potentials are essential for molecular dynamics (MD) simulations of radiation damage, gas diffusion, and phase stability in complex ceramics such as LiAlO 2 , especially under extreme conditions relevant to tritium production. Here, we evaluate the performance of six machine-learned interatomic potentials (MLIPs), moment tensor potential (MTP), Gaussian approximation potential, deep potential (DeePMD), atomic cluster expansion (ACE), message-passing ACE (multilayer atomic cluster expansion (MACE) pretrained) and MACE (trained from-scratch), all trained on the same density functional theory dataset with inclusion of tritium. The MLIPs are benchmarked against traditional Buckingham and ReaxFF potentials in terms of energy accuracy, density predictions, thermal equilibration behavior, threshold displacement energy (E d ), tritium diffusivity, and computational cost. Among the models, MTP shows the best overall balance between efficiency and accuracy, with low force and energy errors and realistic E d values for Li and Al. The ACE and MACE (pretrained and trained from scratch) models exhibit high E d (>200 eV) and unphysical pair interactions. DeePMD underestimates Ed due to overly repulsive behavior even at equilibrium distances. All models over-estimate tritium diffusion but the pretrained MACE model behaves well during tritium-diffusion simulations up to 500 K, maintaining diffusivities in the physically consistent 10 −11 m 2 /s range. Finally, we quantify the computational cost of each potential in large-scale atomic/molecular massively parallel simulator, finding that only MTP is more efficient than traditional empirical potentials, while others are significantly more expensive. These findings explain the trade-offs between accuracy and computational cost in MLIP development and provide essential guidance for use in high-throughput radiation damage and gas diffusion simulations in nuclear ceramics.

74 ATOMIC AND MOLECULAR PHYSICS↗