Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Elastic thermobarometry on metapelites across the crustal section of the Famatinian Arc, Argentina

We applied elastic thermobarometry on garnet-bearing migmatites along two transects through the crustal section at Sierra Valle Fértil-La Huerta, Argentina. We performed quartz-in-garnet barometry and zircon-in-garnet thermometry on metapelites from different paleo-depths across the crustal section. Our work recovers entrapment pressures ranging from 240 to 1330 MPa and entrapment temperatures between 691 and 1574 °C. The entrapment conditions are broadly consistent with anticipated pressures and temperatures along the crustal section derived previously using conventional, thermodynamic thermobarometers. The quartz-in-garnet barometer reproduces those conventionally established entrapment conditions when samples only experienced conditions within the alpha-quartz stability field. Raman-derived pressures for samples that experienced beta-quartz reference conditions are commonly much higher than those established by conventional barometry. Samples that preserve compressive (positive) residual pressures best reproduce reference entrapment pressures. Entrapment temperatures show high variability and overestimation of temperature conditions compared to conventional results. These results indicate elastic thermobarometry over- or under-estimates crystallization conditions in rocks crystallized at high temperatures, as is common in the Famatinian Arc deep-crust. We suggest that modeling quartz behavior across the alpha–beta transition may present challenges, as does shape maturation, viscous deformation, and radiation damage in zircon.

58 GEOSCIENCES↗

Theoretical Study of Structural, Magnetic, Elastic, Phonon, and Thermodynamic Properties of Heusler Alloys Fe{sub 2}CrX (X = Al, Ga)

First-principle calculations based on generalized gradient approximation and quasi-harmonic Debye model were executed to analyze the structural, magnetic, elastic, phonon, and thermodynamic properties of Fe{sub 2}CrX (X = Al, Ga) Heusler alloys. The computed lattice parameters concurred well with available experimental and theoretical data. The calculated elastic constants reveal that the Fe{sub 2}CrAl is brittle and Fe{sub 2}CrGa is ductile. The phonon dispersion relation of Fe{sub 2}CrX (X = Al, Ga) are calculated using finite displacement method with a cutoff radius of 5 Å. We likewise explored the thermodynamic properties by utilizing quasi-harmonic Debye model in which bulk modulus, heat capacity, Debye temperature, Grüneisen parameter, and thermal expansion coefficient are resolved at 0–30 Gpa pressure and 0–900 K temperature from the non-equilibrium Gibbs functions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the Electronic Structure, Magnetic and Elastic Properties and Half-Metallic Stability on Variation of Lattice Constants for CoFeCrZ (Z = P, As, Sb) Heusler Alloys

Structural, elastic, magnetic and electronic properties of CoFeCrZ (Z = P, As, Sb) Heusler alloys in their YI-type structure have been computed by density functional theory-based WIEN2k code within generalized gradient approximation for exchange correlation functions. Values of formation energy and elastic constants verify the stability of these alloys. True half metallic ferromagnetic behaviour with 100% spin polarization and good band gap in the minority spin are obtained for all the alloys. Magnetic moment of these alloys is 4.00 μ{sub B}, which matches well with the value predicted from Slater-Pauling rule. Half-metallicity is maintained over a wide range of lattice constants making these alloys promising for spintronics device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-Principles Investigation of Ferromagnetic, Thermodynamic, Elastic, and Half-Metallic Behavior of ReCrTe and RuCrTe Half-Heusler Alloys

Calculations are realized within the full-potential linearized augmented plane wave (FP-LAPW) computational approach with the generalized gradient approximation (GGA) for the exchange-correlation potential. In this work, we present investigation of structural, electronic, ferromagnetic, elastic, and thermodynamic properties and half-metallic behavior of ReCrTe and RuCrTe compounds. Analysis of band structures and densities of states show the half-metallic ferromagnetic behavior of these compounds. The values of total magnetic moments µ{sub tot} are 1 µ{sub B} per unit cell for ReCrTe and 3 µ{sub B} per unit cell for RuCrTe. The contribution of Cr is the most important. The calculated values of a total magnetic moment nicely follow the rule µ{sub tot} = Z{sub t}− 18. The study of the impacts of strains on the magnetic moment reveals that the two compounds are stable ferromagnetic compounds. RuCrTe compound preserves the half-metallic behavior when the unit cell volume is changed in the range of [ − 4%, 4%], whereas, weak strain destroys the half metallic nature for ReCrTe compound. Using the quasi-harmonic Debye model, the effects of pressure P and temperature T on thermal expansion coefficient, Debye temperature, heat capacity and Grüneisen parameter for these two compounds are investigated for the first time. The study of the elastic constants shows that ReCrTe and RuCrTe are mechanically stable. RuCrTe is stiffer than ReCrTe compounds. The obtained values of Pugh’s ratio B/G and Cauchy pressure (C{sub 12} − C{sub 44}) reveal that ReCrTe and RuCrTe are brittle. The study of the electron charge density and Poisson’s ratio proves that the ionic character dominates the atomic bonding for the two compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Elastic, and Electronic Properties of CeN and LuN Using: Ab Initio Study

We report on the electronic, structural, and elastic property calculations conducted for the rare-earth (RE) nitride compounds in the rocksalt structure (CeN and LuN compounds) using the full-potential linear muffin-tin orbital method (FP-LMTO) based on the spin density functional theory (DFT) calculations using the LSDA + U approach (local spin density approximation with Hubbard-U corrections). The LSDA + U approximation is applied to the 4f as well as 5d states. Various space groups were considered including the NaCl (Fm-3m (225)), the cesium chloride [CsCl(Pm-3m (221))], and the zinc blende [ZnS(F-43m 216))]. Our obtained results indicate that the NaCl-type structure is stable than all the other phases, while the predicted elastic constants were found to satisfy the mechanical stability. The related mechanical properties such as the anisotropy factor (A), Poisson’s ratio (υ), Young’s modulus (E), and the shear modulus (G) for the same NaCl structure were also calculated. Finally, the band structure calculations of the CeN and LuN have revealed half-metallic and semiconductor behaviour, respectively. The obtained results are presented and in-depth discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interaction of Elastic and Scalar Fields

In this work, we consider the problem of interaction of elastic body with scalar field. The general solution of a uniform system of equations (of elasticity theory) for the static case is solved by using the Papkovich representation method. The contact problem is solved by using a special boundary-contact condition, in the case where the contact surface is a stretched spheroid. The uniqueness theorem for the solution is also proved. Solutions are obtained in the form of absolutely and uniformly convergent series.

97 MATHEMATICS AND COMPUTING↗

Solution of Periodic Boundary-Value Problems of the Spatial Theory of Elasticity in the Vector Form

We discuss boundary-value problems for the system of equations of the spatial theory of elasticity in the class of double-periodic functions and obtain a general solution of the system. We distinguish six types of elementary Floquet waves and examine their energy characteristics. We consider fundamental boundary-value problems in the half-space in the vector form. The diffraction problem for an elastic wave on a periodic system of defects in the vector form is reduced to the paired summator functional equation.

97 MATHEMATICS AND COMPUTING↗

Kinetics of Failure in an Elastic Peridynamic Material

The dynamic behavior of an elastic peridynamic material with a nonconvex bond potential is studied. In spite of the material’s inherently unstable nature, initial value problems can be solved using essentially the same techniques as with conventional materials, both analytically and numerically. In a suitably constructed material model, small perturbations grow exponentially over time until the material fails. Additionally, the time for this growth is computed explicitly for a stretching bar that passes from the stable to the unstable phase of the material model. This time to failure represents an incubation time for the nucleation of a crack. The finiteness of the failure time in effect creates a rate dependence in the failure properties of the material. Thus, the unstable nature of the elastic material leads to a rate effect even though it does not contain any terms that explicitly include a strain rate dependence.

36 MATERIALS SCIENCE↗

The elastic properties of beta-eucryptite in the glassy and microcracked crystalline states

Amorphous and crystalline {beta}-eucryptite (LiAlSiO{sub 4}) specimens were prepared with controlled grain sizes and varying levels of microcracking, and their elastic moduli were determined using resonant ultrasound spectroscopy. It was found that the relationship between Young's modulus, Poisson's ratio and degree of microcracking in these materials can be described well with fracture-mechanics-based models. It was also found that if glassy {beta}-eucryptite is considered to be a microcracked medium in which broken Si-O bonds, with respect to the crystalline material, constitute microcracks, then its elastic properties can be described equally well by these models. Such considerations are explained by noting the differences in atomic bond density among the different states of the material and by accounting for differences in strain energy release rate measurements on glass and ceramic specimens.

36 MATERIALS SCIENCE↗

Estimation of local stresses and elastic properties of a mortar sample by FFT computation of fields on a 3D image

This study concerns the prediction of the elastic properties of a 3D mortar image, obtained by micro-tomography, using a combined image segmentation and numerical homogenization approach. The microstructure is obtained by segmentation of the 3D image into aggregates, voids and cement paste. Full-fields computations of the elastic response of mortar are undertaken using the Fast Fourier Transform method. Emphasis is made on highly-contrasted properties between aggregates and matrix, to anticipate needs for creep or damage computation. The representative volume element, i.e. the volume size necessary to compute the effective properties with a prescribed accuracy, is given. Overall, the volumes used in this work were sufficient to estimate the effective response of mortar with a precision of 5%, 6% and 10% for contrast ratios of 100, 1000 and 10,000, resp. Finally, a statistical and local characterization of the component of the stress field parallel to the applied loading is carried out.

36 MATERIALS SCIENCE↗

Stiffness optimization of non-linear elastic structures

Our paper revisits stiffness optimization of non-linear elastic structures. Due to the non-linearity, several possible stiffness measures can be identified and in this work conventional compliance, i.e. secant stiffness designs are compared to tangent stiffness designs. The optimization problem is solved by the method of moving asymptotes and the sensitivities are calculated using the adjoint method. And for the tangent cost function it is shown that although the objective involves the third derivative of the strain energy an efficient formulation for calculating the sensitivity can be obtained. Loss of convergence due to large deformations in void regions is addressed by using a fictitious strain energy such that small strain linear elasticity is approached in the void regions. We formulate a well-posed topology optimization problem by using restriction which is achieved via a Helmholtz type filter. The numerical examples provided show that for low load levels, the designs obtained from the different stiffness measures coincide whereas for large deformations significant differences are observed.

42 ENGINEERING↗

Effects of alloying elements on the elastic properties of bcc Ti-X alloys from first-principles calculations

Titanium alloys are great implant materials due to their mechanical properties and biocompatibility. However, a large difference in Young’s modulus between bone (~10–40 GPa) and common implant mate-rials (ie. Ti-6Al-4V alloy ~ 110 GPa) leads to stress shielding and possible implant failure. Here, the present work predicts the single crystal elastic stiffness coefficients (c ij ’s) for five binary systems with the body centered cubic lattice of Ti-X (X = Mo, Nb, Ta, Zr, Sn) using first-principles calculations based on Density Functional Theory. In addition, the polycrystalline aggregate properties of bulk modulus, shear modulus, Young’s modulus, and Poisson ratio are calculated. It is shown that the lower Young’s modulus of these Ti-alloys stems from the unstable bcc Ti with a negative value of (c 11 –c 12 ). The data gathered from these efforts are compared with available experimental and other first-principles results in the literature, which set a foundation to design biocompatible Ti alloys for desired elastic properties.

36 MATERIALS SCIENCE↗

First-principles study of structural, elastic, electronic, vibrational and thermodynamic properties of uranium aluminides

The structural, elastic, electronic, vibrational and thermodynamic properties of uranium aluminides UAl x (x = 2, 3, 4) were studied by density functional theory calculations. The single crystal elastic constants of UAl x were predicted using the stress-strain method, which were further used to calculate the polycrystalline aggregate properties of UAl x , including bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio, etc. The calculated electronic density of states confirm that UAl x compounds are metallic phases with majority states at the Fermi level contributed by U 5 f electrons. The phonon dispersion relations and density of states show that the low frequency acoustic phonon modes of UAl x are dominated by the lattice vibration of uranium atoms while high frequency optical phonon modes are from the vibration of aluminum atoms. Using quasiharmonic approximation, thermodynamic properties of UAl x , including Gibbs free energy, entropy, heat capacity, and linear thermal expansion coefficient, were predicted by including both lattice vibrational and thermal electronic contributions. The thermal electronic energy was found to be crucial for the description of the temperature dependence of the thermodynamic properties. In conclusion, the derived Gibbs energy functions of UAl x are expected to be useful to the thermodynamic modeling of the ternary U-Mo-Al system.

36 MATERIALS SCIENCE↗

Single-Crystal Elasticity of Wadsleyites, beta-Mg2SiO4, Containing 0.37-1.66 wt.% H2O

The presence of hydrogen can affect elastic properties and seismic velocities of minerals in the Earth's upper mantle. In this study, the second-order elastic constants of hydrous wadsleyites containing 0.37, 0.84, and 1.66 wt.% H2O were determined by Brillouin scattering at ambient conditions. Measurements were performed on at least three independent crystal planes for each composition. The aggregate bulk modulus, KS0, and shear modulus, G0, were calculated using VRH (Voigt-Reuss-Hill) averages. The results are: KS0 = 165.4(9) GPa, G0 = 108.6(6) GPa for wadsleyite with 0.37 wt.% H2O;KS0 = 160.3(7) GPa, G0 = 105.3(6) GPa for 0.84 wt.% H2O; KS0 = 149.2(6) GPa, G0 = 98.6(4) GPa for 1.66 wt.% H2O. We find that the bulk and shear moduli of hydrous wadsleyites decrease linearly with water content according to the following relations (in GPa): KS0 = 170.9(9)-13.0(8)CH2O, G0 = 111.7(6)-7.8(4)CH2O, where CH2O is the H2O weight percentage. Compared with anhydrous wadsleyite, addition of 1 wt.% H2O will lead to a 7.6% decrease in the bulk modulus, and a 7.0% decrease in the shear modulus. Using these results, we examine the velocity contrast between hydrous olivine and wadsleyite at ambient conditions for an Fe-free system assuming an H2O partition coefficient between wadsleyite and olivine of 3. The velocity contrast in compressional and shear velocity between wadsleyite and olivine ranges from 12 to 13% for an H2O-free system to 7-8% for wadsleyite containing 1.5 wt.% H2O. Thus, the magnitude of the seismic velocity change at 410-km depth can be expected to be sensitive to the presence of H2O in olivine polymorphs.

08 HYDROGEN↗

Single-Crystal Elasticity of Wadsleyites, beta-Mg2SiO4, Containing 0.37-1.66 st.% H2O

The presence of hydrogen can affect elastic properties and seismic velocities of minerals in the Earth's upper mantle. In this study, the second-order elastic constants of hydrous wadsleyites containing 0.37, 0.84, and 1.66 wt.% H2O were determined by Brillouin scattering at ambient conditions. Measurements were performed on at least three independent crystal planes for each composition. The aggregate bulk modulus, KS0, and shear modulus, G0, were calculated using VRH (Voigt-Reuss-Hill) averages. The results are: KS0 = 165.4(9) GPa, G0 = 108.6(6) GPa for wadsleyite with 0.37 wt.% H2O; KS0 = 160.3(7) GPa, G0 = 105.3(6) GPa for 0.84 wt.% H2O; KS0 = 149.2(6) GPa, G0 = 98.6(4) GPa for 1.66 wt.% H2O. We find that the bulk and shear moduli of hydrous wadsleyites decrease linearly with water content according to the following relations (in GPa): KS0 = 170.9(9) ? 13.0(8) CH2O, G0 = 111.7(6) ? 7.8(4) CH2O, where CH2O is the H2O weight percentage. Compared with anhydrous wadsleyite, addition of 1 wt.% H2O will lead to a 7.6% decrease in the bulk modulus, and a 7.0% decrease in the shear modulus. Using these results, we examine the velocity contrast between hydrous olivine and wadsleyite at ambient conditions for an Fe-free system assuming an H2O partition coefficient between wadsleyite and olivine of 3. The velocity contrast in compressional and shear velocity between wadsleyite and olivine ranges from 12-13% for an H2O-free system to 7-8% for wadsleyite containing 1.5 wt.% H2O. Thus, the magnitude of the seismic velocity change at 410-km depth can be expected to be sensitive to the presence of H2O in olivine polymorphs.

08 HYDROGEN↗

The Electronic, Elastic, and Structural Properties of Ti-Pd Intermetallics and Associated Hydrides from First-Principles Calculations

Using an ab initio density functional approach, we report on the ground-state phase stabilities, enthalpies of formation, electronic, and elastic properties of the Ti-Pd alloy system. The calculated enthalpies of formation are in excellent agreement with available calorimetric data. We found a linear dependence between the calculated enthalpies of formation of several intermetallic structures and the Pd-concentration, indicating that each of these compounds has a very limited composition range. The elastic constants for many of these Ti-Pd intermetallics were calculated and analyzed. The B2 TiPd phase is found to be mechanically unstable with respect to the transformation into the monoclinic B19 structure. A series of hydrides, Ti2PdHx (x=1, 1.5, 2, 3, 4), have been investigated in terms of electronic structure, enthalpies of hydrogen absorption, and site preference of H atoms. Our results illustrate the physical mechanism for hydrogen absorption in term of the charge transfer, and explain why TiPd2 does not form a stable hydride.

08 HYDROGEN↗

Elastic moduli of high-density, sintered monoliths of yttrium dihydride

Yttrium dihydride has been considered as potential nuclear reactor moderator for micro-reactors operating in the thermal energy spectrum due to their ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. Despite these advantages, it is difficult to prepare yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to volume expansion upon hydriding and the pyrophoric nature of the material. In this work, high-density monoliths of yttrium dihydride were prepared by direct hydriding and using powder metallurgical methods. Resonant ultrasound spectroscopy was used to measure the elastic moduli of the sintered monoliths, while nanoindentation was used to determine the Young’s modulus and hardness of the directly-hydrided yttrium and the sintered monoliths. Single crystal elastic constants and related properties of yttrium dihydride were also determined using density functional theory (DFT) for comparison. We report mechanical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgy, this result indicated that the monoliths produced by powder metallurgy were of high quality. To that end, powder metallurgy is believed to be a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

Wave propagation in anisotropic elastic materials and curvilinear coordinates using a summation-by-parts finite difference method

We develop a fourth order accurate finite difference method for solving the three-dimensional elastic wave equation in general heterogeneous anisotropic materials on curvilinear grids. The proposed method is an extension of the method for isotropic materials, previously described in the paper by Sjögreen and Petersson (2012) [11]. The method we proposed discretizes the anisotropic elastic wave equation in second order formulation, using a node centered finite difference method that satisfies the principle of summation by parts. The summation by parts technique results in a provably stable numerical method that is energy conserving. Also, we generalize and evaluate the super-grid far-field technique for truncating unbounded domains. Unlike the commonly used perfectly matched layers (PML), the super-grid technique is stable for general anisotropic material, because it is based on a coordinate stretching combined with an artificial dissipation. Moreover, the discretization satisfies an energy estimate, proving that the numerical approximation is stable. We demonstrate by numerical experiments that sufficiently wide super-grid layers result in very small artificial reflections. Applications of the proposed method are demonstrated by three-dimensional simulations of anisotropic wave propagation in crystals.

58 GEOSCIENCES↗