Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effect measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

NaCu 6 Se 4 : A Layered Compound with Mixed Valency and Metallic Properties

A new ternary compound NaCu6Se4 was synthesized from the reaction of Cu in a molten sodium polyselenide flux. The compound crystallizes in trigonal space group R$\bar{3}$m with a = 4.0465(3) Å and c = 41.493(5) Å. The crystal structure contains flat twodimensional slabs of 1/∞[Cu 6 Se 4 ] with a unique structural arrangement, separated by Na cations. The compound contains mixed valency and has a high conductivity of ~3 × 10 3 S cm -1 at room temperature, and exhibits increasing conductivity with decreasing temperature, indicating metallic behavior. A small positive thermopower (4-11 μV K -1 from 300 to 500 K) and Hall effect measurements indicate p-type transport with a carrier concentration of ~2.8(3) × 10 21 cm -3 and a hole mobility of ~8.75 cm 2 V -1 s -1 at 300 K. NaCu 6 Se 4 exhibits temperatureindependent Pauli paramagnetism.

36 MATERIALS SCIENCE↗

Reactive Landing of Dendrimer Ions onto Activated Self-assembled Monolayer Surfaces

The reactivity of gaseous, amine-terminated polyamidoamine (PAMAM) dendrimer ions with activated self-assembled monolayer (SAM) surfaces terminated with N-hydroxysuccinimidyl ester groups (NHS-SAM) is examined using mass-selected ion deposition combined with in situ infrared reflection absorption spectroscopy (IRRAS). The reaction extent is determined from depletion of the infrared band at 1753 cm-1, corresponding to the stretching vibration of the NHS carbonyl groups following ion deposition. For reaction yields below 10%, NHS band depletion follows a linear dependence on the ion dose. By comparing the kinetics plots obtained for 1,12-dodecanediamine and different generations of dendrimer ions (G0–G3) containing 4, 8, 16, and 32 terminal amino group, we demonstrate that the relative reaction efficiency increases linearly with the number of NH2 groups in the molecule. This finding is rationalized assuming the formation of multiple amide bonds upon collision of higher-generation dendrimers with NHS-SAM. Furthermore, by comparing the NHS band depletion following deposition of [M+4H]4+ ions of the G2 dendrimer at 30, 80, and 120 eV, we demonstrate that the ion’s kinetic energy has no measurable effect on reaction efficiency. Similarly, the ion’s charge state only has a minor effect on the reactive landing efficiency of dendrimer ions. Our results indicate that reactive landing is an efficient approach for highly selective covalent immobilization of complex multifunctional molecules onto organic surfaces terminated with labile functional groups.

Environmental Molecular Sciences Laboratory↗

Volcanology, Geochemistry, and Petrology Perspectives on Integrated, Coordinated, Open, Networked (ICON) Science

This article is composed of a commentary about the state of Integrated, Coordinated, Open, and Networked (ICON) principles in Volcanology, Geochemistry, and Petrology (VGP), and discussion on the opportunities and challenges of adopting them. VGP encompasses a broad field that addresses volcanic, magmatic, hydrothermal, geomicrobial systems; process investigations that span the physical, geochemical and biological realms, including planetary geology; and one that is extensively supported by state-of-the-art research facilities. We suggest that an open, inclusive, collaborative and evolving model of an international coordinated network is critical to answering the most pressing challenges in VGP. In this commentary piece, we begin to discuss the elements of, challenges to, and path forward in developing such a model. For this team, ICON means collaboration, equitable access to data for the entire scientific community, and forging of partnerships that potentially contribute to more innovative ways of coordinating and sharing research. It also means bringing more equity to science, by implementing effective measures which consider access to funding, analytical equipment, resources, and mentors. More importantly, ICON to us means having important conversations around what we value in the advancement of science, perhaps exploring outside the idea of meritocracy and evaluating what individual traits can contribute to science outside what has traditionally been considered the norm.

58 GEOSCIENCES↗

Variable spin-charge conversion across metal-insulator transition

The charge-to-spin conversion efficiency is a crucial parameter in determining the performance of many useful spintronic materials. Usually, this conversion efficiency is predetermined by the intrinsic nature of solid-state materials, which cannot be easily modified without invoking chemical or structural changes in the underlying system. Here we report on successful modulation of charge-spin conversion efficiency via the metal-insulator transition in a quintessential strongly correlated electron compound vanadium dioxide (VO2). By employing ferromagnetic resonance driven spin pumping and the inverse spin Hall effect measurement, we find a dramatic change in the spin pumping signal (decrease by > 80%) and charge-spin conversion efficiency (increase by five times) upon insulator to metal transition. The abrupt change in the structural and electrical properties of this material therefore provides useful insights on the spin related physics in a strongly correlated material undergoing a phase transition.

36 MATERIALS SCIENCE↗

Switchable geometric frustration in an artificial-spin-ice–superconductor heterosystem

Geometric frustration emerges when local interaction energies in an ordered lattice structure cannot be simultaneously minimized, resulting in a large number of degenerate states. The numerous degenerate configurations may lead to practical applications in microelectronics(1), such as data storage, memory and logic(2). However, it is difficult to achieve very high degeneracy, especially in a two-dimensional system(3,4). Here, we showcase in situ controllable geometric frustration with high degeneracy in a two-dimensional flux-quantum system. We create this in a superconducting thin film placed underneath a reconfigurable artificial-spin-ice structure(5). The tunable magnetic charges in the artificial-spin-ice strongly interact with the flux quanta in the superconductor, enabling switching between frustrated and crystallized flux quanta states. The different states have measurable effects on the superconducting critical current profile, which can be reconfigured by precise selection of the spin-ice magnetic state through the application of an external magnetic field. We demonstrate the applicability of these effects by realizing a reprogrammable flux quanta diode. The tailoring of the energy landscape of interacting 'particles' using artificial-spin-ices provides a new paradigm for the design of geometric frustration, which could illuminate a path to control new functionalities in other material systems, such as magnetic skyrmions(6), electrons and holes in two-dimensional materials(7,8), and topological insulators(9), as well as colloids in soft materials(10-13).

Wang, Yong-Lei (ORCID:0000000303917757)↗

Cavity-altered superconductivity

Is it feasible to alter the ground-state properties of a material by engineering its electromagnetic environment? Inspired by theoretical predictions, experimental realizations of such cavity-controlled properties without optical excitation are beginning to emerge. Here we devised and implemented a new platform to realize cavity-altered materials. Single crystals of hyperbolic van der Waals (vdW) compounds provide a resonant electromagnetic environment with enhanced density of photonic states and prominent mode confinement. We interfaced hexagonal boron nitride (hBN) with the molecular superconductor κ-(BEDT-TTF) 2 Cu[N(CN) 2 ]Br (κ-ET). The frequencies of infrared hyperbolic modes (HMs) of hBN match the infrared-active carbon–carbon (C=C) stretching molecular resonance of κ-ET implicated in superconductivity. Nano-optical data supported by first-principles molecular Langevin dynamics simulations confirm the presence of resonant coupling between the hBN hyperbolic cavity modes and the C=C stretching mode in κ-ET. Meissner-effect measurements using magnetic force microscopy (MFM) demonstrate a strong suppression of superfluid density near the hBN/κ-ET interface. Non-resonant control heterostructures, including RuCl 3 /κ-ET and hBN/Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO), do not show the pronounced superfluid suppression. These observations suggest that hBN/κ-ET realizes a cavity-altered superconducting ground state. Our work highlights the potential of dark cavities devoid of external photons for engineering electronic ground-state properties of complex quantum materials.

36 MATERIALS SCIENCE↗

Quantum simulation of an extended Dicke model with a magnetic solid

Abstract The Dicke model describes the cooperative interaction of an ensemble of two-level atoms with a single-mode photonic field and exhibits a quantum phase transition as a function of light–matter coupling strength. Extending this model by incorporating short-range atom–atom interactions makes the problem intractable but is expected to produce new physical phenomena and phases. Here, we simulate such an extended Dicke model using a crystal of ErFeO 3 , where the role of atoms (photons) is played by Er 3+ spins (Fe 3+ magnons). Through terahertz spectroscopy and magnetocaloric effect measurements as a function of temperature and magnetic field, we demonstrated the existence of a novel atomically ordered phase in addition to the superradiant and normal phases that are expected from the standard Dicke model. Further, we elucidated the nature of the phase boundaries in the temperature–magnetic-field phase diagram, identifying both first-order and second-order phase transitions. These results lay the foundation for studying multiatomic quantum optics models using well-characterized many-body solid-state systems.

Marquez Peraca, Nicolas↗

Deuterium incorporation in biomass cell wall components by NMR analysis

A commercially available deuterated kale sample was analyzed for deuterium incorporation by ionic liquid solution 2H and 1H nuclear magnetic resonance (NMR). This protocol was found to effectively measure the percent deuterium incorporation at 33%, comparable to the 31% value determined by combustion. The solution NMR technique also suggested by a qualitative analysis that deuterium is preferentially incorporated into the carbohydrate components of the kale sample.

09 BIOMASS FUELS↗

The importance of phase equilibrium for doping efficiency: iodine doped PbTe

Semiconductor engineering relies heavily on doping efficiency and dopability. Low doping efficiency may cause low mobility and failure to reach target carrier concentrations or even the desired carrier type. Semiconducting thermoelectric materials perform best with degenerate carrier concentrations, meaning high performance in new materials might not be realized experimentally without a route to optimal doping. Doping in the classic PbTe thermoelectric system has been largely successful but reported doping efficiencies can vary, raising concerns about reproducibility. Here, we stress the importance of phase equilibria considerations during synthesis to avoid undesired intrinsic defects leading to sub-optimal doping. By saturation annealing at 973 K, we decidedly fix the composition in single crystal iodine-doped PbTe samples to be Pb-rich or Te-rich without introducing impurity phases. We show that, regardless of iodine concentration, degenerate n-type carrier concentrations with ideal doping efficiency require Pb-rich compositions. Electrons in Te-rich samples are heavily compensated by charged intrinsic Pb vacancy defects. From Hall effect measurements and a simple defect model supported by modern defect calculations, we map out the 973 K ternary Pb–Te–I phase diagram to explicitly link carrier concentration and composition. Furthermore, we discuss unintentional composition changes due to loss of volatile Te during synthesis and measurements. The methods and concepts applied here may guide doping studies on other lead chalcogenide systems as well as any doped, complex semiconductor.

36 MATERIALS SCIENCE↗

Optoelectronic property comparison for isostructural Cu 2 BaGeSe 4 and Cu 2 BaSnS 4 solar absorbers

To target mitigation of anti-site defect formation in Cu 2 ZnSnS 4–x Se x , a new class of chalcogenides, for which Ba or Sr (group 2) replace Zn (group 12), has recently been introduced for prospective solar absorber application. Cu 2 BaGeSe 4 (CBGSe) and Cu 2 BaSnS 4 (CBTS) are two such compounds, which share a common trigonal crystal structure (P3 1 space group) and similar quasi-direct band gap (~2 eV). While CBTS-based films have already been studied, there are no reports yet on films and solar cells based on related CBGSe. To identify key differences and similarities in the electronic properties between these two materials, electronic characteristics (e.g., carrier concentration, mobility, electron affinity, defect levels, recombination, and charge carrier kinetics) of vacuum-deposited CBGSe and CBTS films are compared using a variety of characterization methods. Hall effect measurements reveal that CBGSe films have relatively higher hole carrier concentration and lower mobility (3 × 10 15 cm –3 , 0.6 cm 2 V –1 s –1 ) compared to CBTS (5 × 10 12 cm –3 , 3.5 cm 2 V –1 s –1 ). Photoelectron spectroscopy yields low electron affinity values for both CBGSe (3.7 eV) and CBTS (3.3 eV), pointing to the necessity of pursuing low electron affinity buffer materials for both types of absorbers. At low temperatures, CBGSe films show free-exciton photoluminescence, as well as pronounced deep-level emission at ~1.4 eV, while CBTS films exhibit a strong bound-exciton signal with noticeably less intense deep-level emission than for CBGSe. Charge carrier kinetics, transport, and recombination properties of both types of films are also analyzed using optical-pump terahertz-probe spectroscopy and time-resolved microwave conductivity. The first CBGSe prototype solar cells (using chemical bath deposited CdS as a buffer layer) show a maximum of 1.5% efficiency with ~0.62 V open-circuit voltage. Furthermore, the measured properties point to possible limiting factors for CBGSe and related films for PV and optoelectronics and provide insights on possible approaches for improvement within this multinary chalcogenide family.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

0{sup +} states in the large boson number limit of the Interacting Boson Approximation model

Studies of the Interacting Boson Approximation (IBA) model for large boson numbers have been triggered by the discovery of shape/phase transitions between different limiting symmetries of the model. These transitions become sharper in the large boson number limit, revealing previously unnoticed regularities, which also survive to a large extent for finite boson numbers, corresponding to valence nucleon pairs in collective nuclei. It is shown that energies of 0{sub n}{sup +} states grow linearly with their ordinal number n in all three limiting symmetries of IBA [U(5), SU(3), and O(6)]. Furthermore, it is proved that the narrow transition region separating the symmetry triangle of the IBA into a spherical and a deformed region is described quite well by the degeneracies E(0{sub 2}{sup +}) = E(6{sub 1}{sup +}, E(0{sub 3}{sup +}) = E(10{sub 1}{sup +}), E(0{sub 4}{sup +}) = E(14{sub 1}{sup +}, while the energy ratio E(6{sub 1}{sup +})/E(0{sub 2}{sup +} turns out to be a simple, empirical, easy-to-measure effective order parameter, distinguishing between first- and second-order transitions. The energies of 0{sub n}{sup +} states near the point of the first order shape/phase transition between U(5) and SU(3) are shown to grow as n(n+3), in agreement with the rule dictated by the relevant critical point symmetries resulting in the framework of special solutions of the Bohr Hamiltonian. The underlying partial dynamical symmetries and quasi-dynamical symmetries are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-dimensional axisymmetric Child-Langmuir scaling law

The classical one-dimensional (1D) Child-Langmuir law was previously extended to two dimensions by numerical calculation in planar geometries. By considering an axisymmetric cylindrical system with axial emission from a circular cathode of radius r, outer drift tube radius R>r, and gap length L, we further examine the space charge limit in two dimensions. Simulations were done with no applied magnetic field as well as with a large (100 T) longitudinal magnetic field to restrict motion of particles to 1D. The ratio of the observed current density limit J{sub CL2} to the theoretical 1D value J{sub CL1} is found to be a monotonically decreasing function of the ratio of emission radius to gap separation r/L. This result is in agreement with the planar results, where the emission area is proportional to the cathode width W. The drift tube in axisymmetric systems is shown to have a small but measurable effect on the space charge limit. Strong beam edge effects are observed with J(r)/J(0) approaching 3.5. Two-dimensional axisymmetric electrostatic particle-in-cell simulations were used to produce these results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction of ICRF Fields with the Plasma Boundary in AUG and JET and Guidelines for Antenna Optimization

W sputtering during ICRF on ASDEX Upgrade (AUG) and temperature rise on JET A2 antenna septa are considered in connection with plasma conditions at the antenna plasma facing components and E{sub parallel} near-fields. Large antenna-plasma clearance, high gas puff and low light impurity content are favorable to reduce W sputtering in AUG. The spatial distribution of spectroscopically measured effective W sputtering yields clearly points to the existence of strong E{sub parallel} fields at the antenna box ('feeder fields') which dominate over the fields in front of the antenna straps. The picture of E{sub parallel} fields, obtained by HFSS code, corroborates the dominant role of E{sub parallel} at the antenna box on the formation of sheath-driving RF voltages for AUG. Large antenna-plasma clearance and low gas puff are favorable to reduce septum temperature of JET A2 antennas. Assuming a linear relation between the septum temperature and the sheath driving RF voltage calculated by HFSS, the changes of the temperature with dipole phasing (00{pi}{pi}, 0{pi}{pi}0 or 0{pi}0{pi}) are well described by the related changes of the RF voltages. Similarly to the AUG antenna, the strongest E{sub parallel} are found at the limiters of the JET A2 antenna for all used dipole phasings and at the septum for the phasings different from 0{pi}0{pi}. A simple general rule can be used to minimize E{sub parallel} at the antenna: image currents can be allowed only at the surfaces which do not intersect magnetic field lines at large angles of incidence. Possible antenna modifications generally rely either on a reduction of the image currents, on their short-circuiting by introducing additional conducting surfaces or on imposing the E{sub parallel} = 0 boundary condition. On the example of AUG antenna, possible options to minimize the sheath driving voltages are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Single-material multilayer with enhanced photoactivity

Molybdenum trioxide (MoO{sub 3}) patterned at the nanometer scale is combined with the same material in its bulk form to produce Bragg mirrors with enhanced photoactive properties. MoO{sub 3} undergoes coloration with exposure to UV light but a multilayer structure which alternates between nanostructured and bulk MoO{sub 3} is 2.5 times more effective. Measurements with various multilayer arrangements suggest the proximity of bulk and nanostructured MoO{sub 3} favors the photoreaction with structural water. A possible minor contribution from electronic band shifting is also discussed.

36 MATERIALS SCIENCE↗

Simple go/no-go test for subcritical damage in body armor panels

The development of a simple test for subcritical damage in body armor panels using pressure-sensitive dye-indicator film has been performed and demonstrated effective. Measurements have shown that static indicator levels are accurately reproduced in dynamic loading events. Impacts from hard blunt impactors instrumented with an accelerometer and embedded force transducer were studied. Reliable correlations between the indicator film and instrumented impact force are shown for a range of impact energies. Force and acceleration waveforms with corresponding indicator film results are presented for impact events onto damaged and undamaged panels. We find that panel damage can occur at impact levels far below the National Institute of Justice acceptance test standard.

42 ENGINEERING↗

Absolute sensitivity calibration of vacuum and extreme ultraviolet spectrometer systems and Z{sub eff} measurement based on bremsstrahlung continuum in HL-2A tokamak

A grazing-incidence flat-field extreme ultraviolet (EUV) spectrometer has been newly developed in HL-2A tokamak. Typical spectral lines are observed from intrinsic impurities of carbon, oxygen, iron, and extrinsic impurity of helium in the wavelength range of 20 A-500 A. Bremsstrahlung continuum is measured at different electron densities of HL-2A discharges to calibrate absolute sensitivity of the EUV spectrometer system and to measure effective ionic charge, Z{sub eff}. The sensitivity of a vacuum ultraviolet (VUV) spectrometer system is also absolutely calibrated in overlapped wavelength range of 300 A-500 A by comparing the intensity between VUV and EUV line emissions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Photoelectron spectroscopic study of band alignment of polymer/ZnO photovoltaic device structure

Using x-ray photoelectron spectroscopy, we investigated the band alignment of a Ag/poly(3-hexylthiophene-2,5-diyl) (P3HT)/ZnO photovoltaic structure. At the P3HT/ZnO interface, a band bending of P3HT and a short surface depletion layer of ZnO were observed. The offset between the highest occupied molecular orbital of P3HT and the conduction band minimum of ZnO at the interface contributed to the open circuit voltage (Voc) was estimated to be approximately 1.5 {+-} 0.1 eV, which was bigger than that of the electrically measured effective Voc of P3HT/ZnO photovoltaic devices, meaning that the P3HT/ZnO photovoltaic structure has the potential to provide improved photovoltaic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron bunch energy and phase feed-forward stabilization system for the Mark V RF-linac free-electron laser

An amplitude and phase compensation system has been developed and tested at the University of Hawai'i for the optimization of the RF drive system to the Mark V free-electron laser. Temporal uniformity of the RF drive is essential to the generation of an electron beam suitable for optimal free-electron laser performance and the operation of an inverse Compton scattering x-ray source. The design of the RF measurement and compensation system is described in detail and the results of RF phase compensation are presented. Performance of the free-electron laser was evaluated by comparing the measured effects of phase compensation with the results of a computer simulation. Finally, preliminary results are presented for the effects of amplitude compensation on the performance of the complete system.

43 PARTICLE ACCELERATORS↗