Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Optical fiber interferometer for the study of ultrasonic waves in composite materials

The possibility of acoustic emission detection in composites using embedded optical fibers as sensing elements was investigated. Optical fiber interferometry, fiber acoustic sensitivity, fiber interferometer calibration, and acoustic emission detection are reported. Adhesive bond layer dynamical properties using ultrasonic interface waves, the design and construction of an ultrasonic transducer with a two dimensional Gaussian pressure profile, and the development of an optical differential technique for the measurement of surface acoustic wave particle displacements and propagation direction are also examined.

Claus, R. O.↗

Development of quality assurance methods for epoxy graphite prepreg

Quality assurance methods for graphite epoxy/prepregs were developed. Liquid chromatography, differential scanning calorimetry, and gel permeation chromatography were investigated. These methods were applied to a second prepreg system. The resin matrix formulation was correlated with mechanical properties. Dynamic mechanical analysis and fracture toughness methods were investigated. The chromatography and calorimetry techniques were all successfully developed as quality assurance methods for graphite epoxy prepregs. The liquid chromatography method was the most sensitive to changes in resin formulation. The were also successfully applied to the second prepreg system.

Chen, J. S.↗

Preliminary design for a Zero Gravity Test Facility (ZGTF). Volume 1: Technical

The functional requirements and best conceptual design of a test facility that simulates weightless operating conditions for a high gain antenna systems (HGAS), that will broadcast to the Tracking Data Relay Satellites were defined. The typical HGAS defined is mounted on a low Earth orbiting satellite, and consists of an antenna with a double gimbal pointing system mounted on a 13 foot long mast. Typically, the gimbals are driven by pulse modulated dc motors or stepper motors. These drivers produce torques on the mast, with jitter that excites the satellite and may cause disturbances to sensitive experiments. The dynamic properties of the antenna support structure (mast), including flexible mode characteristics were defined. The torque profile induced on the spacecraft by motion of the high gain antenna was estimated. Gain and phase margins of the servo control loop of the gimbal drive electronics was also verified.

Germain, A.↗

Topological analysis of computed three-dimensional viscous flow fields

Computed solutions of the time-dependent, Reynolds-averaged Navier-Stokes equations for three dimensional flows having thin shear layers are analyzed using topological concepts. Specific examples include the transonic flow over a body of revolution with conical afterbody at moderate angles of incidence to the free stream. Experimental flow-visualization techniques are simulated graphically to visualize the computed flow. Scalar and vector fluid dynamics properties such as pressure, shear stress, and vorticity on the body surface are presented as topological maps, and their relationship to one another in terms of orientation and singular points is discussed. The extrapolation from these surface topologies toward the understanding of external flow-field behavior is and demonstrated.

Deiwert, G. S.↗

Control system analysis and synthesis for a six degree-of-freedom universal Force-Reflecting Hand Controller

A six degree-of-freedom joystick with feedback motors, called the Force-Reflecting Hand Controller (FRHC) is used as control input for the human operator in a teleoperator system. The geometric and dynamic properties of the FRHC are entirely different from those of the manipulator being controlled. The paper discusses the analysis and synthesis of the control loop between the FRHC and the robot arm and examines the necessary position and force transformations. The controller is implemented through a dedicated minicomputer.

Handlykken, M.↗

Environmental and high strain rate effects on composites for engine applications

The complex environmental and loading conditions experienced by many turbine engine components impose severe durability and damage tolerance requirements for component materials. Programs are being conducted to establish the structural performance of composite materials under anticipated engine operating environments. A description is presented of the results obtained in connection with several of these programs. A comparison of predicted and measured hygrothermal effects is considered along with hygrothermal effects on defect growth, high strain rate effects on composite mechanical properties, dynamic stress intensity factors for composites, and the indentation laws for composite impact analysis.

Chamis, C. C.↗

Galaxy clusters with multiple components. I - The dynamics of Abell 98

The nature and evolution of rich galaxy clusters containing multiple condensations is studied. Velocities for 13 members of A98 are presented and the determination of dynamical properties of the individual subclusters is substantially improved. The application of techniques for quantifying gravitational scale lengths are stressed without invocation of the symmetry arguments demanded by the usual parameter fitting procedures. The entire A98 cluster is modeled as a two-body system. The probability that A98 is bound is found to be 98 percent. From this model and the results of previous N-body simulations, it is shown that the most likely description of the system is that it reached maximum expansion about 3.5 billion years ago and is presently in a state of collapse. The subclusters will merge in another three billion years.

Beers, T. C.↗

Dynamics of subjective discomfort in motion sickness as measured with a magnitude estimation method

Eight subjects, wearing left-right vision reversing goggles, executed sequences of controlled active head movements to provoke motion sickness. Head movement sequences were interspaced with periods of eye closure and no head movement to permit partial remission of symptoms between sequences. Subjects reported the level of discomfort experienced by using a magnitude estimation technique derived from Stevens' (1957) ratio scaling method. Using this approach, we demonstrated that the time course of subjective discomfort exhibits a profile, similar in all our subjects, characterized by both fast and slow response components. The potential usefulness of magnitude estimation for research on the dynamic properties of the mechanism generating motion sickness symptoms is discussed.

Bock, O. L.↗

Theory and observation of a dynamically evolving negative ion plasma

The study described here examines the full range of negative-ion chemistry in the upper ionosphere by using current reaction rate data to investigate the many chemical paths SF6-type injections might take in an F region environment. Special attention is given to the conditions required to create heavy negative ions that persist long enough to affect the dynamical properties of the F region. The ambipolar diffusion characteristics of a three-component plasma are described, and estimates are given of the incoherent scatter spectra obtained from such a plasma. Model calculations using a first-order chemical code are defined and tested in order to investigate the actual types of negative-ion plasma capable of being created under nighttime conditions.

Mendillo, M.↗

Stability and control of the Gossamer human powered aircraft by analysis and flight test

The slow flight speed, very light wing loading, and neutral stability of the Gossamer Condor and the Gossamer Albatross emphasized apparent-mass aerodynamic effects and unusual modes of motion response. These are analyzed, approximated, and discussed, and the resulting transfer functions and dynamic properties are summarized and compared. To verify these analytical models, flight tests were conducted with and electrically powered Gossamer Albatross II. Sensors were installed and their outputs were telemetered to records on the ground. Frequency sweeps of the various controls were made and the data were reduced to frequency domain measures. Results are given for the response of: pitch rate, airspeed and normal acceleration from canard-elevator deflection; roll rate and yaw rate from canard-rudder tilt; and roll rate and yaw rate from wing warp. The reliable data are compared with the analytical predictions.

Jex, H. R.↗

Design and test of aircraft engine isolators for reduced interior noise

Improved engine vibration isolation was proposed to be the most weight and cost efficient retrofit structure-borne noise control measure for single engine general aviation aircraft. A study was carried out the objectives: (1) to develop an engine isolator design specification for reduced interior noise transmission, (2) select/design candidate isolators to meet a 15 dB noise reduction design goal, and (3) carry out a proof of concept evaluation test. Analytical model of the engine, vibration isolators and engine mount structure were coupled to an empirical model of the fuselage for noise transmission evaluation. The model was used to develop engine isolator dynamic properties design specification for reduced noise transmission. Candidate isolators ere chosen from available product literature and retrofit to a test aircraft. A laboratory based test procedure was then developed to simulate engine induced noise transmission in the aircraft for a proof of concept evaluation test. Three candidate isolator configurations were evaluated for reduced structure-borne noise transmission relative to the original equipment isolators.

Unruh, J. F.↗

Spiky ion acoustic waves in collisionless auroral plasma

A theory of spiky electric fields in 'inverted V' precipitation regions is elaborated and compared with recent spacecraft observations of solitary waves and double layers. A prediction from the theory is that the electric fields propagate along the magnetic field as perturbed ion acoustic solitons that intensify by exchanging momentum with reflected particles. The solitons have minimum scale lengths of approximately 100 m and maximum electric potential and field amplitudes of 1-10 V and 1-10 mV/m. They propagate at the local ion acoustic speed and are Doppler-shifted by the drift speed of upward flowing cold ions. Both rarefactive and compressive solitons with, respectively, negative and positive electric potentials are possible. It is noted that upward propagating compressive modes intensify when the upward flow of ionospheric ions exceeds approximately 10 times the local ion acoustic speed. The kinematic and dynamic properties of rarefactive solitons are found to be consistent with recent observations.

Lotko, W.↗

Planetary atmospheres

During the period from 1979 to 1982, Pioneer and Voyager missions to Venus, Jupiter, and Saturn combined with ongoing analysis and data collection from the Viking-Mars mission have contributed greatly to an understanding of planetary atmospheres. Research concerning the atmosphere of Venus is discussed, taking into account the atmospheric composition, the isotopic ratios of noble gases, data concerning temperature and pressure, information regarding various atmospheric layers, atmospheric density data, and models regarding the dynamical properties of Venus' atmosphere. Information concerning the atmosphere of Mars is also examined. Isotopic ratios of carbon and oxygen are considered along with altitude profiles, diurnal heating and cooling, and thermal tides and their relationship to dust storms. Attention is given to the temperature structure of the Jovian atmosphere, the morphology of Jovian cloud features, features in the Saturnian atmosphere, information with respect to the atmosphere of Titan, the rotation rates of Uranus, masses and densities of Uranus and Neptune, and the identification of Pluto as a small icy body.

Beebe, R.↗

Topological analysis of computed three-dimensional viscous flow fields

Computed solutions of the time-dependent, Reynolds-averaged Navier-Stokes equations for three-dimensional flows having thin shear layers are analyzed, using topological concepts. Specific examples include the transonic flow over a body of revolution with conical afterbody at moderate angles of incidence to the free stream. Experimental flow-visualization techniques are simulated graphically to visualize the computed flow. Scalar and vector fluid dynamic properties, such as pressure, shear stress, and vorticity on the body surface, are presented as topological maps, and their relationship to one another in terms of orientation and singular points is discussed. The extrapolation from these surface topologies toward the understanding of external flow-field behavior is discussed and demonstrated.

Deiwert, G. S.↗

Redshifts of groups and clusters in the rich superclusters 1451+22 and 1615+43

Redshift measurements and finding charts are presented for galaxy clusters in the field of two rich, distant superclusters. Both systems are shown to have morphological and dynamical properties similar to the nearby superclusters, including small internal velocity dispersions and high density contrasts in redshift space. This data is consistent with two interpretations: either both superclusters are highly flattened systems with major axes close to the plane of the sky, or the observed velocity dispersions do not arise from unperturbed Hubble flow. If the latter explanation is correct, these radial velocity data are a powerful probe of the large scale matter density in the universe.

Ciardullo, R.↗

A statistical study of F region ion temperatures at high latitudes based on Atmosphere Explorer C data

The ion-energy balance in the high-latitude F region was studied using 40,000 simultaneous ion-temperature and drift measurements on Atmosphere Explorer C. The large number of measurements revealed how the mean ion temperature, and the average deviation from that mean, change as a function of ion drift speed during solar-minimum conditions. It was found that, in spite of an apparent large scatter in the data, the measurements could always be reasonably explained in terms of fluctuations in the neutral dynamical properties, to which the ion energy is coupled. The results also provide evidence for increased neutral drifts as the ion E x B drift increases. Evidence for systematic ion-drag effects can also be found, on the average, for dc electric fields stronger than 60 mV/m.

St.-Maurice, J.-P.↗

The Gamma-Ray Observatory mission objectives and its significance for gamma-ray astronomy

The Gamma Ray Observatory (GRO) is an approved NASA mission, programmed for launch in 1988. Its complement of four detectors has established goals: (1) to study the nature of compact gamma-ray sources such as neutron stars and black holes, or objects whose nature is yet to be understood; (2) to search for evidence of nucleosynthesis especially in the regions of supernovae; (3) to study structural features and dynamical properties of the Galaxy; (4) to explore other galaxies, especially the extraordinary types such as radio, Seyferts, and quasars; and (5) to study cosmological effects by examining the diffuse radiation in detail. This paper discusses the design, objectives, and expected scientific results of each of the GRO instruments in view of the GRO mission goals.

Bertsch, D. L.↗

Research and development activities in unified control-structure modeling and design

Results of work to develop a unified control/structures modeling and design capability for large space structures modeling are presented. Recent analytical results are presented to demonstrate the significant interdependence between structural and control properties. A new design methodology is suggested in which the structure, material properties, dynamic model and control design are all optimized simultaneously. Parallel research done by other researchers is reviewed. The development of a methodology for global design optimization is recommended as a long-term goal. It is suggested that this methodology should be incorporated into computer aided engineering programs, which eventually will be supplemented by an expert system to aid design optimization.

Nayak, A. P.↗