Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Microelectromechanical Systems

Micro-electromechanical systems (MEMS) is an enabling technology that merges computation and communication with sensing and actuation to change the way people and machines interact with the physical world. MEMS is a manufacturing technology that will impact widespread applications including: miniature inertial measurement measurement units for competent munitions and personal navigation; distributed unattended sensors; mass data storage devices; miniature analytical instruments; embedded pressure sensors; non-invasive biomedical sensors; fiber-optics components and networks; distributed aerodynamic control; and on-demand structural strength. The long term goal of ARPA's MEMS program is to merge information processing with sensing and actuation to realize new systems and strategies for both perceiving and controlling systems, processes, and the environment. The MEMS program has three major thrusts: advanced devices and processes, system design, and infrastructure.

Gabriel, Kaigham J.↗
NASA NTRS2000

Effect of Combined Spaceborne Microwave and Continuous Lightning Measurements on Precipitation Forecasts of the 1998 Ground-Hog Day Storm

We evaluated the impact of several newly available sources of meteorological data on mesoscale model forecasts of precipitation produced by the extra-tropical cyclone that struck Florida on February 2, 1998. Precipitation distributions of convective rainfall events were derived from Special Sensor Microwave Imager (SSM/I) and Multi-Channel Passive Microwave Sensor (TMI) microwave radiometric data by means of the Goddard PROFiling (GPROF) algorithm. Continuous lightning distributions were obtained from sferics measurements obtained from a network of VLF radio receivers. Histograms of coincident sferics frequency distributions were matched to those of precipitation to derive bogus convective rainfall rates from the continuously available sferics measurements. SSM/I and TMI microwave data were used to derive Integrated Precipitable Water (IPW) distributions. The TMI also provided sea surface temperatures (SSTS) of the Loop Current and Gulf Stream with improved structural detail. A series of experiments assimilated IPW and latent heating from the bogus convective rainfall for six-hours in the MM5 mesoscale forecast model to produce nine-hour forecasts of all rainfall as well as other weather parameters. Although continuously assimilating latent heating only slightly improved the surface pressure distribution forecast, it significantly improved the precipitation forecasts. Correctly locating convective rainfall was found critical for assimilating latent heating in the forecast model, but measurement of the rainfall intensity proved to be less important. The improved SSTs also had a positive impact on rainfall forecasts for this case. Assimilating bogus rainfall in the model produced nine-hour forecasts of radar reflectivity distributions that agreed well with coincident observations from the TRMM spaceborne precipitation radar, ground based radar and spaceborne microwave measurements.

Weinman, James A.↗
NASA NTRS1998

Immunological and biochemical evidence for nuclear localization of annexin in peas

Immunofluorescent localization of annexins using an anti-pea annexin polyclonal antibody (anti-p35) in pea (Pisum sativum) leaf and stem epidermal peels showed staining of the nuclei and the cell periphery. Nuclear staining was also seen in cell teases prepared from pea plumules. The amount of nuclear stain was reduced both by fixation time and by dehydration and organic solvent treatment. Observation with confocal microscopy demonstrated that the anti-p35 stain was diffusely distributed throughout the nuclear structure. Immunoblots of purified nuclei, nuclear envelope matrix, nucleolar, and chromatin fractions showed a cross-reactive protein band of 35 kDa. These data are the first to show annexins localized in plant cell nuclei where they may play a role in nuclear function.

Non-NASA Center↗
DOE OSTI2022

Rheo-Structural Spectroscopy: Fingerprinting the In Situ Response of Fluids to Arbitrary Flow Fields

The objectives of this project were to develop new sample environments, measurement methodologies and associated modeling tools for characterizing the structural response to arbitrarily complex processing flows using small angle scattering, and to apply these new tools for understanding the fundamental physics governing the structuring of anisotropic particulate and polymeric materials under flow histories and conditions relevant to industrial processing flows. The research resulted in the development and implementation of a new sample environment, the fluidic four roll mill (FFoRM), for in situ small angle neutron and X-ray scattering (SANS/SAXS) measurements. These measurements are capable of generating large data sets that “fingerprint” how a complex fluid responds to a wide range of flow histories involving time variations in deformation type and rate. New modeling tools were developed to extract detailed microstructural information from such data sets, including orientation distribution functions and interparticle correlation functions, as well as reduced-order parametric descriptors of these high-dimensional functions that can be used to readily map, visualize and interpret a fluid’s structural response to its flow history. These new tools were applied to a range of model materials involving elongated particle suspensions in order to provide new insights into the physics of how flow couples with orientational and structural order in complex flows, particularly under non-dilute conditions for which no accurate theories currently exist. Using these investigations, we elucidated a number of new insights into the fundamental phenomena driving such process-structure-property relationships. These findings provide guidance for the further development of rheological models, and ultimately can inform the rational and model-based design of flow processes to achieve optimized orientational ordering that is key to the properties and function of a wide range of energy-relevant materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Reinforcement Learning-based Output Structured Feedback for Distributed Multi-Area Power System Frequency Control

Load frequency control (LFC) is a key factor to maintain the stable frequency in multi-area power systems. As the modern power systems evolve from centralized to decentralized paradigm, LFC needs to consider the decentralized scheme that considers limited information from the information-exchange graph for the generator control of each interconnected area. This paper aims to solve a data-driven constrained LQR problem with mean-variance risk constraints and output structured feedback, and applies this framework to solve the LFC problem in multi-area power systems. By reformulating the constrained optimization problem into a minimax problem, the stochastic gradient descent max-oracle (SGDmax) algorithm with zero-order policy gradient (ZOPG) is adopted to find the optimal feedback gain from the learning, while guaranteeing the convergence. In addition, to improve the adaptation of the proposed learning method to new or varying models, we construct an emulator grid that approximates the dynamics of a physical grid and performs training based on this model. Once the feedback gain is obtained from the emulator grid, it is applied to the physical grid with a robustness test to check whether the controller from the approximated emulator applies to the actual system. Numerical tests show that the obtained feedback controller can successfully control the frequency of each area, while mitigating the uncertainty from the loads, with reliable robustness that ensures the adaptability of the obtained feedback gain to the actual physical grid.

Kwon, Kyung-bin↗
NASA NTRS1987

Variations of electron distribution functions in the solar wind

Variations of electron distribution functions in the solar wind have been investigated using the electron data observed aboard Helios 2 during the first four months of its mission in 1976 in the distance range between 0.3 and 1 AU. In particular, variations across the sector structure of the interplanetary magnetic field and across the plasma stream structures have been studied. It has been found that there is a strong correlation between the electron properties and the sector structure of the magnetic field. Within the interior of magnetic sectors the electron distribution functions are extremely anisotropic and skewed with respect to the magnetic field direction at high particle energies. Toward sector boundaries the electron distribution functions become less anisotropic and less skewed. Right at sector boundaries the electrons are relatively cool, and their distributions are nearly isotropic often showing a slight bidirectional anisotropy. These observations have been interpreted to indicate that scattering of electrons with energies above 100 eV is weak within the interior of magnetic sectors but anomalous scattering increases drastically toward sector boundaries for all energies in the halo regime up to several hundred eV. There is evidence for closed magnetic field structures, probably occurring frequently in the solar wind, where the magnetic field lines should usually be connected to the sun outside sector boundaries but may or may not be disconnected from the sun at sector boundaries.

Pilipp, W. G.↗
DOE OSTI2024

DyG-DPCD: A Distributed Parallel Community Detection Algorithm for Large-Scale Dynamic Graphs

Dynamic (Temporal) graphs capture the valuable evolution of real-world systems, from the continuously evolving patterns of social interactions and genetic pathways to the dynamic fluctuations of economic forces. Detecting communities for such evolving networks poses unique challenges. Detecting and analyzing the evolution of communities within dynamic graphs unlocks valuable insights into the underlying structural and temporal patterns of real-world systems. However, the sheer volume of modern graph data and the inherent complexity of the temporal dimension pose significant challenges to scalable community detection algorithms. Addressing this gap, our work explores the limited landscape of scalable distributed-memory parallel methods specifically designed for dynamic network community detection. We propose a novel parallel algorithm, DyG-DPCD (Dynamic Graph Distributed Parallel Community Detection), to detect communities in dynamic networks using the Message Passing Interface (MPI) framework. We present a vertex-centric approach, allowing us to detect communities through local optimization. Furthermore, we enhance our baseline algorithm by incorporating three heuristics, which improve the algorithm’s performance significantly while maintaining the quality of the solutions. We demonstrate the efficiency of our algorithm by experimenting on several real-world large-scale networks with hundreds of millions of edges spanning diverse domains. Notably, DyG-DPCD achieves speedups between 25× and 30× for large networks that we experimented on using NERSC compute nodes. In conclusion, our algorithm outperforms the STINGER parallel re-agglomeration algorithm by 30×.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

GLIMPSE of Future Power Grid Models

Power grid is one of the critical national infrastructures with social, economics, and national security impacts. Particularly, power distribution systems represent part of the infrastructure between power distribution substations and customers such as residential, commercial, and industrial. To address various grid modernization challenges, state-of-the-art algorithms and methodologies have been developed to deploy, operate, and expand a secure and resilient power grid. At the same time, there is a need to develop capabilities to assist power grid stakeholders to quickly get insight into the design and structure of the grid. Data visualization is a key approach to comprehend and understand complex systems such as the power grid. We present GLIMPSE Grid Layout Interface for Model Preview and System Exploration), a graph-based semantic-aware application to visualize and update distribution power grid models. The GLIMPSE can be used with standard IEEE models to search and highlight power grid objects such as generators, loads, overhead lines, etc. Additionally, it supports updating attributes and model export to integrate with GridLAB-D simulations.

Cybersecurity, power grid, visualization↗
NASA NTRS1987

On the 3-dimensional structure of plasmoids

The hypothesis that the IMF penetrates plasmoids causing them to be three- rather than two-dimensional is tested by comparing observations of By within plasmoids and related tail structures to upstream IMF By data. The magnetic topologies that result from the mergings of closed plasma sheet flux tubes and open tail lobe flux tubes at a near-earth neutral line, and merging near the tail flanks are described and studied. The particle signals and isotropic electron distributions are examined. It is observed that the IMF By penetrates plasmoids and that their structure is three-dimensional. In the three-dimensional model of plasmoids the reconnected plasma sheet field lines form a magnetic flux-ropelike structure. The three-dimensional model is utilized to analyze stagnant, slowly moving and earthward moving structures.

Hughes, W. J.↗
NASA NTRS1990

More data on (possible) gamma ray (point) sources

The 2CG catalog of gamma ray sources was compiled before detailed knowledge was available on the fine-scale structure of the diffuse Galactic gamma-ray emission. Two independent analyses to discriminate sources which are either compact objects of due to very local and strong enhancements in the Galactic cosmic-ray distribution from those which are artifacts due to the clumpy gas distribution are about to be completed: a maximum likelihood analysis and a cross correlation analysis. Arguments are given why differences, and therefore confusion, and in resulting source lists can be expected. Detailed analysis of all COS-B gamma-ray data on Geminga (2CG195+04), reveals the existence of a drastic spectral break below 200 MeV. A power-law spectrum with index -1.88 fits the data above about 100 MeV to 3.2 GeV, however, there are also indications for a spectral break above these energies. For energies above about 100 MeV no evidence for a long-term time variability was found. The error region of Geminga was searched for a radio counterpart at wavelengths of 90, 49, 21, 6, and 2 cm using the Westerbork Synthesis Radio Telescope and the Very Large Array. So far, 16 sources were detected in this error region. In the direction of 1E0630+178, the Einstein x ray source proposed to be a Vela-like pulsar and the counterpart of Geminga, no radio source was found at 21, 49, and 90 cm with 3 sigma upper limits on the flux densities ranging from 0.5 mJy at 21 cm to 4.5 mJy at 90 cm. Detailed structures in local molecular cloud complexes are so far only resolved in gamma rays for the closet and most massive complexes, namely those in the Orion-Monoceros and the Ophiuchus regions. For both region, there is circumstantial evidence for gamma ray emission from molecular gas that was photodissociated after the passage of a SN shell.

Hermsen, W.↗
NASA NTRS2000

Primary and Secondary Controls on Measurements of Forest Height Using Large-Footprint Lidar at the Hubbard Brook LTER

On September 26, 1999, we mapped canopy structure over 90% of the Hubbard Brook Experimental Forest in White Mountain National Forest, New Hampshire, using the Laser Vegetation Imaging Sensor (LVIS). This airborne instrument was configured to emulate data expected from the Vegetation Canopy Lidar (VCL) space mission. We compared above ground heights of the tallest surfaces detected by lidar with average forest canopy heights estimated from tree-based measurements in or near 346 0.05 ha plots (made in autumn of 1997 and 1998). Vegetation heights had by far the predominant influence on lidar top heights, but with this large data set we were able to measure two significant secondary effects: those of steepness or slope of the underlying terrain and of tree crown form. The size of the slope effect was intermediate between that expected from models of homogeneous canopy layers and for solitary tree crowns. The first detected surfaces were also proportionately taller for plots with more basal area in broad leaved northern hardwoods than for mostly coniferous plots. We expected this because of the contrast between the shapes of cumulative distributions of surface area for elliptical or hemi-elliptical tree crowns and those for conical crowns. Correcting for these secondary effects, when appropriate data are available for calibration, may improve vegetation structure estimates in regional studies using VCL or similar lidar data sources.

Knox, Robert G.↗
DOE OSTI2026

Signatures of Thermoreversible Associations in X-ray and Neutron Scattering from Dilute Polyzwitterion Solutions

In aqueous solutions of polyzwitterions (PZs), an interplay between dipole–dipole interactions and hydration of zwitterionic groups can lead to thermoreversible associations, which have been difficult to detect in experiments. Here, in this study, we investigated dilute aqueous solutions of poly(1-(3-sulphonatopropyl)-2-vinylpyridinium) (P2VPPS) using small-angle X-ray and neutron scattering (SAXS and SANS) to probe the structure and neutron spin-echo (NSE) spectroscopy to probe dynamics. The SAXS and SANS data show that the correlation length increases with an increase in the concentration of P2VPPS for three different molecular weights. The addition of 0.1 M NaCl to one of the solutions led to almost no dependence of the correlation length on the concentration. Such a concentration dependence of the correlation length suggests the formation of clusters driven by thermoreversible associations in the solutions. The NSE measurements show that the solutions with a larger correlation length display slower relaxation, reflecting the reduced mobility of larger clusters. These results should be considered as signatures of thermoreversible associations in the solutions of P2VPPS. To establish a quantitative link between local structure (clusters) and dynamics in dilute solutions of P2VPPS, we combined a thermoreversible gelation theory for the structure of PZ solutions (Li, S.-F.; Muthukumar, M. Theory of Thermoreversible Gelation and Anomalous Concentration Fluctuations in Polyzwitterion Solutions. J. Chem. Phys. 2024, 161, 024903) with a model for the dynamics of the clusters (generalized Zimm model), developed in this work. Using such a theoretical framework, we have predicted the distribution of clusters in the solutions probed with SANS and SAXS. With the distributions, the generalized Zimm model has been used to extract the diffusion constant of the clusters and their characteristic size from the NSE data, where the latter agrees with the values estimated from the SAXS/SANS data. These findings confirm the presence of thermoreversible associations and establish a quantitative link between local structure (clusters) and dynamics in dilute solutions of P2VPPS. Furthermore, with growing interest in technological applications, this work can provide useful insights into the structural and dynamical properties of other PZ solutions.

field theory↗
NASA NTRSDate not supplied

Mineralogical, Elemental and Tomographic Reconnaissance Investigation for CLPS (“METRIC”)

METRIC comprises a suite of two instruments in a Lunar lander that perform X-ray diffraction (XRD) for mineral structure, X-ray fluorescence (XRF) for elemental composition, and X-ray Micro Computed Tomography (XCT) for 3D internal micromorphology. The instruments are accompanied by optical-near IR cameras to provide local geologic context. The Honeybee Robotics PlanetVac pneumatic sampling and transfer system [1],positioned on a lander footpad, will deliver sieved regolith to the X-ray instruments for analysis. The instrument suite is intended for delivery to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander. The METRICXRD/F instrument draws on heritage from the Mars Science Laboratory CheMin instrument [2] and improves upon the design in multiple ways [3]. Like CheMin, Rietveld refinement and full-pattern fitting of METRIC XRD data can identify minerals at a detection limit of ~1 wt.%, quantify their abundances when present at >3 wt.%, and determine mineral composition (e.g., Fo#in olivine) from lattice parameters for minerals present at >5 wt.%[4,5]. An optimized XRF geometry provides for improved detection and quantification of major, minor and trace elements. The METRIC XCT instrument is a miniaturized X-ray Computed Tomography scanner[6]. Lunar regolith is delivered to a 3 mm diameter, 10 mm long graphite tube inside the instrument. The tube is rotated through 360°in 0.9deg.incrementsand a divergent point source X-ray beam is directed through the material. A Charge Coupled Device (CCD)records attenuation images whose brightness and contrast area function of average atomic number and density. Quantitative data, including particle and void sizes, 3D particle shape parameters, modal volumes and pore geometry can be derived from the resulting 3D reconstructions(voxel resolution: 30 μm). Crystal morphologies derived from METRIC XCT data complement the bulk mineralogy determined by the METRIC XRD/F and provide a measure of grain size distribution for the different phases. Taken together, the METRIC instrument suite determines crystal structure, elemental composition and morphology, three principal characteristics of geological materials that are highly useful in determining the origin and subsequent processing of lunar regolith.

Moon↗
NASA NTRS1991

Experimental flutter boundaries with unsteady pressure distributions for the NACA 0012 Benchmark Model

The Structural Dynamics Div. at NASA-Langley has started a wind tunnel activity referred to as the Benchmark Models Program. The objective is to acquire test data that will be useful for developing and evaluating aeroelastic type Computational Fluid Dynamics codes currently in use or under development. The progress is described which was achieved in testing the first model in the Benchmark Models Program. Experimental flutter boundaries are presented for a rigid semispan model (NACA 0012 airfoil section) mounted on a flexible mount system. Also, steady and unsteady pressure measurements taken at the flutter condition are presented. The pressure data were acquired over the entire model chord located at the 60 pct. span station.

Rivera, Jose A., Jr.↗
DOE OSTI2022

Studies of BONuS12 Radial GEM Detector and TCS Beam Spin Asymmetry in CLAS12

The Barely Offshell Nucleon Structure (BONuS12) experiment adopted the concept of spectator tagging technique to study the nearly-free neutron structure function Fn2 in the CLAS12 of Jefferson Lab. A novel Radial Time Projection Chamber (RTPC) detector was built, tested and integrated into the CLAS12 system to detect a back-moving low momentum tagged proton in d(e,ep)X deep-inelastic scattering. It was a 40 cm long gaseous detector consisting of 3 layers of cylindrical GEM foils for the charge amplification, with the data readout directly from the surrounding padboard. The RTPC detected the recoiling spectator proton, in coincidence with the scattered electron in the CLAS12. Nucleon structure functions are directly related to the partonic functions, quarks momentum distribution in one dimension. A Generalized Parton Distribution (GPD) came to the lime-light as it encodes the information of both longitudinal momentum and transverse position of partons inside the nucleons. Factorization of hard process such as DVCS allows to access GPDs. Timelike Compton Scattering (TCS), ?p ? ??p, is another process that allows to access the GPDs. TCS is studied experimentally in the CLAS12 of Jefferson lab using the quasi-real photoproduction of time-like photon which eventually decays to lepton pair. This dissertation presents the concept of spectator tagging in BONuS12, and the research and development efforts during the BONuS12 preparation leading up to the successful data-taking during spring and summer 2020. In addition, analysis framework to extract the beam spin asymmetry of TCS events through the CLAS12 Run group A data is presented.

Poudel, Jiwan↗
NASA NTRS1994

Organelle sedimentation in gravitropic roots of Limnobium is restricted to the elongation zone

Roots of the aquatic angiosperm Limnobium spongia (Bosc) Steud. were evaluated by light and electron microscopy to determine the distribution of organelle sedimentation towards gravity. Roots of Limnobium are strongly gravitropic. The rootcap consists of only two layers of cells. Although small amyloplasts are present in the central cap cells, no sedimentation of any organelle, including amyloplasts, was found. In contrast, both amyloplasts and nuclei sediment consistently and completely in cells of the elongation zone. Sedimentation occurs in one cell layer of the cortex just outside the endodermis. Sedimentation of both amyloplasts and nuclei begins in cells that are in their initial stages of elongation and persists at least to the level of the root where root hairs emerge. This is the first modern report of the presence of sedimentation away from, but not in, the rootcap. It shows that sedimentation in the rootcap is not necessary for gravitropic sensing in at least one angiosperm. If amyloplast sedimentation is responsible for gravitropic sensing, then the site of sensing in Limnobium roots is the elongation zone and not the rootcap. These data do not necessarily conflict with the hypothesis that sensing occurs in the cap in other roots, since Limnobium roots are exceptional in rootcap origin and structure, as well as in the distribution of organelle sedimentation. Similarly, if nuclear sedimentation is involved in gravitropic sensing, then nuclear mass would function in addition to, not instead of, that of amyloplasts.

NASA Discipline Plant Biology↗
DOE OSTI2024

Modeling Distributed Computing Infrastructures for HEP Applications

Predicting the performance of various infrastructure design options in complex federated infrastructures with computing sites distributed over a wide area network that support a plethora of users and workflows, such as the Worldwide LHC Computing Grid (WLCG), is not trivial. Due to the complexity and size of these infrastructures, it is not feasible to deploy experimental test-beds at large scales merely for the purpose of comparing and evaluating alternate designs. An alternative is to study the behaviours of these systems using simulation. This approach has been used successfully in the past to identify efficient and practical infrastructure designs for High Energy Physics (HEP). A prominent example is the Monarc simulation framework, which was used to study the initial structure of the WLCG. New simulation capabilities are needed to simulate large-scale heterogeneous computing systems with complex networks, data access and caching patterns. A modern tool to simulate HEP workloads that execute on distributed computing infrastructures based on the SimGrid and WRENCH simulation frameworks is outlined. Studies of its accuracy and scalability are presented using HEP as a case-study. Hypothetical adjustments to prevailing computing architectures in HEP are studied providing insights into the dynamics of a part of the WLCG and candidates for improvements.

Horzela, Maximilian↗
DOE OSTI2020

Structure retrieval in liquid-phase electron scattering

Electron scattering on liquid samples has been enabled recently by the development of ultrathin liquid sheet technologies. The data treatment of liquid-phase electron scattering has been mostly reliant on methodologies developed for gas electron diffraction, in which theoretical inputs and empirical fittings are often needed to account for the atomic form factor and remove the inelastic scattering background. In this work, we present an alternative data treatment method that is able to retrieve the radial distribution of all the charged particle pairs without the need of either theoretical inputs or empirical fittings. Here, the merits of this new method are illustrated through the retrieval of real-space molecular structure from experimental electron scattering patterns of liquid water, carbon tetrachloride, chloroform, and dichloromethane.

74 ATOMIC AND MOLECULAR PHYSICS↗