Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dimensional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Analysis of a two-dimensional type 6 shock-interference pattern using a perfect-gas code and a real-gas code

Numerical codes were developed to calculate the two dimensional flow field which results when supersonic flow encounters double wedge configurations whose angles are such that a type 4 pattern occurs. The flow field model included the shock interaction phenomena for a delta wing orbiter. Two numerical codes were developed, one which used the perfect gas relations and a second which incorporated a Mollier table to define equilibrium air properties. The two codes were used to generate theoretical surface pressure and heat transfer distributions for velocities from 3,821 feet per second to an entry condition of 25,000 feet per second.

Bertin, J. J.↗
NASA NTRS1973

Optimum TPS Design with Rei-mullite

It has been shown that a ceramic mullite fiber/mullite insulation has adequate margins-of-safety based on minimum strengths for the critical thermostructural conditions of the shuttle mission. Introduction into the design of the new lower density foam bond material provides cold soak and cold entry capability at 116 K (-250 F). Finally, design solutions to the coating cracking tendencies have been identified and the solution analytically verified with three dimensional thermostructural analysis.

Hess, T. E.↗
NASA NTRS1974

Computer program for quasi-one-dimensional compressible flow with area change and friction - Application to gas film seals

A computer program is presented for compressible fluid flow with friction and area change. The program carries out a quasi-one-dimensional flow analysis which is valid for laminar and turbulent flows under both subsonic and choked flow conditions. The program was written to be applied to gas film seals. The area-change analysis should prove useful for choked flow conditions with small mean thickness, as well as for face seals where radial area change is significant. The program is written in FORTRAN 4.

Zuk, J.↗
NASA NTRS1974

Buckling of conical shell with local imperfections

Small geometric imperfections in thin-walled shell structures can cause large reductions in buckling strength. Most imperfections found in structures are neither axisymmetric nor have the shape of buckling modes but rather occur locally. This report presents the results of a study of the effect of local imperfections on the critical buckling load of a specific axially compressed thin-walled conical shell. The buckling calculations were performed by using a two-dimensional shell analysis program referred to as the STAGS (Structural Analysis of General Shells) computer code, which has no axisymmetry restrictions. Results show that the buckling load found from a bifurcation buckling analysis is highly dependent on the circumferential arc length of the imperfection type studied. As the circumferential arc length of the imperfection is increased, a reduction of up to 50 percent of the critical load of the perfect shell can occur. The buckling load of the cone with an axisymmetric imperfections is nearly equal to the buckling load of imperfections which extended 60 deg or more around the circumference, but would give a highly conservative estimate of the buckling load of a shell with an imperfection of a more local nature.

Cooper, P. A.↗
NASA NTRS1973

Development of an annular arc accelerator shock tube driver

An annular arc accelerator (ANAA) shock tube driver has been developed that deposits the energy of an arc discharge into a flowing gas, which then expands and cools without any delay for the opening of a diaphragm. A simplified one-dimensional flow analysis of the ANAA shock tube has been performed, which indicates that shock velocities greater than 40 km/sec may be obtained using a 300-kJ capacitor bank. The ANAA driver consists of a high-pressure driver, an expansion section, and an electrode section. In operation, the cold gas driver is pressurized until the diaphragm bursts, sending a pressure front down the expansion tube to the arc section. When the accelerated flow arrives at the electrode section, a 100-capacitor, 300-kJ capacitor bank is discharged either by breaking an insulating diaphragm between the electrodes or by the triggering of a series of external switches. Shock velocities of 28 km/sec have been obtained, and modifications are described that are expected to improve performance.

Leibowitz, L. P.↗
NASA NTRS1975

Compressible flow computer program for gas film seals

Computer program, AREAX, calculates properties of compressible fluid flow with friction and area change. Program carries out quasi-one-dimensional flow analysis which is valid for laminar and turbulent flows under both subsonic and choked flow conditions. Program was written to be applied to gas film seals.

Zuk, J.↗
NASA NTRS1975

Space shuttle orbit maneuvering engine reusable thrust chamber. Task 10: Data dump comparison of 8- and 10- inch diameter thrust chambers

An analytical and design study was conducted to compare the high and low contraction ratio thrust chambers for regenratively cooled orbit maneuvering engines for the space shuttle was conducted. The design concepts were evaluated on the basis of weight, pressure drop, and performance. Only the basic thrust chamber assembly was considered. The assembly consists of the injector, the regeneratively cooled thrust chamber, and the radiation cooled nozzle. A two dimensional thermal analysis of the channel section is provided.

Pauckert, R. P.↗
NASA NTRS1974

Measurement of the earth resources technology satellite /ERTS-1/ multi-spectral scanner OTF from operational imagery

The optical transfer function (OTF) of some typical ERTS-1 multispectral imagery was obtained by comparison of matched sets of aircraft underflight and ERTS photographic and digital images. One-dimensional OTF analysis consisted in obtaining U-2 and ERTS microdensitometer scans followed by density to transmission conversion, microdensitometer aperture correction, exposure calibration, scan correlation scale optimization, OTF calculation, obtaining a form weighted average of the OTFs, transformation of the OTFs back to the spatial domain (giving the line spread function or LSF), and application of a window function to the LSF resulting in a smoothed OTF. Date-to-date comparison of ERTS OTFs showed a drop in quality on April 4, 1973, compared with January 4, 1973.

Schowengerdt, R. A.↗
NASA NTRS1977

Multilayer insulative systems

One dimensional numerical analysis of transient thermal response multilayer insulative system determines temperature distribution through system consisting of one to four layers. Program based on this analysis will determine thickness of specified layer that will satisfy specified temperature-limit criterion at any point in insulative system.

Brinkley, K. L.↗
NASA NTRS1976

Numerical analysis of a two-dimensional nonsteady detonations

In the present work a system of two-dimensional nonsteady hydrodynamic and chemical kinetic equations was numerically integrated for an exothermic system. Assumed two-step reaction model simulates practically an oxyhydrogen mixture. The calculation starts from a plane Chapman-Jouguet detonation as an initial condition. Two-dimensional disturbances are generated by artificially placing nonuniformities ahead of the detonation front. Regardless of the difference of the given initial disturbances, a fixed number of triple shock waves were produced for a fixed combination of mixture model and geometry when the transition period was over. This shows that for a given detonation tube geometry any exothermic system has its own characteristic multidimensional structure. The obtained number of triple shock waves contained in the detonation front was in agreement with existing experimental observations under the same condition.

Taki, S.↗
NASA NTRS1977

Three-dimensional elastic stress and displacement analysis of finite geometry solids containing cracks

The line method of analysis is applied to the Navier-Cauchy equations of elastic equilibrium to calculate the displacement fields in finite geometry bars containing central, surface, and double-edge cracks under extensionally applied uniform loading. The application of this method to these equations leads to coupled sets of simultaneous ordinary differential equations whose solutions are obtained along sets of lines in a discretized region. Normal stresses and the stress intensity factor variation along the crack periphery are calculated using the obtained displacement field. The reported results demonstrate the usefulness of this method in calculating stress intensity factors for commonly encountered crack geometries in finite solids.

Kring, J.↗
NASA NTRS1976

Cyclic structural analyses of air-cooled gas turbine blades and vanes

The creep-fatigue behavior of a fully impingement-cooled blade for four cyclic cases was analyzed by using the Elas 55, finite-element, nonlinear structural computer program. Expected cyclic lives were calculated by using the method of Strainrange Partitioning for reversed inelastic strains and time fractions for ratcheted tensile creep strains. Strainrange Partitioning was also applied to previous results from a one-dimensional cyclic analysis of a film-impingement-cooled vane. The analyses indicated that Strainrange Partitioning is more applicable to a constrained airfoil such as the film-impingement-cooled vane than to the relatively unconstrained fully impingement-cooled airfoil.

Kaufman, A.↗
NASA NTRS1977

Three-dimensional elastic stress and displacement analysis of finite geometry solids containing cracks

The line method of analysis is applied to the Navier-Cauchy equations of elastic equilibrium to calculate the displacement fields in finite geometry bars containing central, surface, and double-edge cracks under extensionally applied uniform loading. The application of this method to these equations leads to coupled sets of simultaneous ordinary differential equations whose solutions are obtained along sets of lines in a discretized region. Normal stresses and the stress intensity factor variation along the crack periphery are calculated using the obtained displacement field. The reported results demonstrate the usefulness of this method in calculating stress intensity factors for commonly encountered crack geometries in finite solids.

Kring, J.↗
NASA NTRS1978

Two-dimensional computer code for design assessment of SRM aft closure environment

A general interpolants method for constructing numerical analogs of the partial differential equations of continuum mechanics and which combines the best features of both finite element and finite difference methods was used in a two dimensional axisymmetric analysis of the space shuttle solid motor aft closure region flowfield. The numerical technique used is discussed as well as the results of the analysis. A steady state solution for the submerged nozzle nose region indicates the development of an area gas flow recirculation near the propellant burning surface boundary and in the region of the underside of the nozzle nose. This recirculation region remains spatially fixed for successive iterations (greater than 800) of the solution.

Freeman, J. A.↗
NASA NTRS1978

Low-cycle fatigue of thermal-barrier coatings at 982 deg C

The low-cycle fatigue lives of ZrO2-NiCrAlY and Al2O3-ZrO2-NiCrAlY thermal-barrier coatings in air at 982 C were determined from cyclic flexural tests of coated TAZ-8A strips. Strains were computed as a function of specimen displacements from a nonlinear, three-dimensional stress analysis program. Fatigue resistances of thermal-barrier coatings applied to the strips were compared with those of uncoated and NiCrAlY-coated strips. The results indicate that ZrO2 is about four times greater in fatigue life than TAZ-8A at 982 C, that ZrO2 would probably retain that fatigue strength up to 1316 C, and that adding an outer coat of Al2O3 to ZrO2 is neither beneficial nor detrimental to fatigue resistance.

Kaufman, A.↗
NASA NTRS1979

Three-dimensional finite-element elastic analysis of a thermally cycled single-edge wedge geometry specimen

An elastic stress analysis was performed on a wedge specimen (prismatic bar with single-wedge cross section) subjected to thermal cycles in fluidized beds. Seven different combinations consisting of three alloys (NASA TAZ-8A, 316 stainless steel, and A-286) and four thermal cycling conditions were analyzed. The analyses were performed as a joint effort of two laboratories using different models and computer programs (NASTRAN and ISO3DQ). Stress, strain, and temperature results are presented.

Bizon, P. T.↗