Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffractive networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

One-pot occurrence of two polymorphs of Rb{sub 2}Sc[Si{sub 4}O{sub 10}]F and their structural, spectroscopic and computational characterization

Single-crystal growth experiments in the system RbF–Sc{sub 2}O{sub 3}–SiO{sub 2} resulted in the crystallization of two forms of Rb{sub 2}Sc[Si{sub 4}O{sub 10}]F within the same run. Basic crystallographic data of the two concomitant polymorphs at ambient conditions are as follows: phase I: space group I4/m, a=11.2619(3) Å, c=8.3053(4) Å, V=1053.36(6) Å{sup 3}, Z=4; phase II: space group P2{sub 1}/m, a=11.5085(6) Å, b=8.3805(3) Å, c=11.6750(6) Å, β=111.147(6)°, V=1050.19(9) Å{sup 3}, Z=4. The structures were determined by direct methods and refined to residuals of R(|F|)=0.0231 (phase I) for 516 and 0.0249 (phase II) for 2050 independent observed reflections with I>2σ(I). Phase I showed twinning by merohedry which was accounted for during the refinement process. Both compounds are based on multiple chains of [SiO{sub 4}]-tetrahedra forming closed columns or tubes. The multiplicity of the unbranched fundamental chains is two (for phase I) and four (for phase II), respectively. The periodicity of the multiple chains has a value of four in both modifications which is also reflected in similar translation periods along the chain directions (phase I: t{sub [001]}=8.31 Å; phase II: t{sub [010]}=8.38 Å). Alternatively, both polymorphs can be described as mixed octahedral–tetrahedral frameworks, which can be classified according to their polyhedral microensembles. A topological analysis of both networks is presented. Structural investigations have been supplemented by micro-Raman spectroscopy. The interpretation of the spectroscopic data including the allocation of the bands to certain vibrational species has been aided by DFT-calculations. - Graphical abstract: Mixed tetrahedral–octahedral framework of the tetragonal polymorph of Rb{sub 2}Sc[Si{sub 4}O{sub 10}]F. - Highlights: • We report the crystal structures of two polymorphs of Rb{sub 2}ScSi{sub 4}O{sub 10}F. • Both phases crystallized concomitantly in the same flux-growth experiment. • The mixed tetrahedral–octahedral nets are compared using a topological approach. • Interpretation of the Raman spectra has been aided by DFT-calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen and related materials at high density: Physics, chemistry and planetary implications

Recent studies of low-Z molecular materials including hydrogen to multimegabar pressures (less than 300 GPa) have uncovered a range of phenomena relevant to understanding the nature of the interiors of the outer planets and their satellites. Synchrotron x ray diffraction measurements (to 42 GPa) have been used to determine the crystal structure of the solid (hexagonal-close packed) and equation of state. Sound velocities in fluid and solid hydrogen (to 24 GPa) have been inverted to obtain elastic constants and aggregate bulk and shear moduli. In addition, an improved intermolecular potential has been determined which fits both static and shock-wave data. Use of the new potential for the molecular envelope of Jupiter suggests the need for major revisions of existing Jovian models or a reanalysis of reported free oscillations for the planet. Studies at higher pressures (greater than 100 GPa) reveal a sequence of pressure-induced symmetry-breaking transitions in molecular hydrogen, giving rise to three high-pressure phases (1, 2, and 3). Phase 1 is the rotationally disordered hcp phase which persists from low pressure to well above 100 GPa at high temperature (e.g., 300 K). Phase 2 is a low-temperature, high-pressure phase (transition at 100 GPa and 77 K in H2) with spectral features indicative of partial rotational ordering and crystallographic distortion. The transition to Phase 3 at 150 GPa is accompanied by a weakening of the molecular bond, gradual changes in orientational ordering, strong enhancement of the infrared intramolecular vibrational absorption, and strong intermolecular interactions similar to those of ambient-pressure network solids. Studies of the phase diagram reveal a triple point near 130 K and 160 GPa. Higher pressure measurements of vibrational spectra place a lower bound of approximately 250 GPa on the predicted transition pressure for dissociation of molecular hydrogen to form a monatomic metal.

Hemley, R. J.↗

Crystal structure, thermal and magnetic properties of Cr{sub 2}V{sub 4}O{sub 13}

Cr{sub 2}V{sub 4}O{sub 13}, a tetravanadate of Cr{sup 3+} has been prepared by repeated heating of stoichiometric amounts of Cr{sub 2}O{sub 3} and V{sub 2}O{sub 5} and its crystal structure is refined by Rietveld refinement of the powder XRD data. This compound crystallizes in a monoclinic lattice with unit cell parameters: a=8.2651(3), b=9.2997(3), c=14.5215(5) A, {beta}=102.618(3){sup o}, V=1089.21(6) A{sup 3} and Z=4 (Space group: P2{sub 1}/c). The U shaped (V{sub 4}O{sub 13}){sup 6-} formed by corner connected VO{sub 4} tetrahedra links the Cr{sub 2}O{sub 10} (dimers of two edge shared CrO{sub 6} octahedra) forming a three dimensional network structure of Cr{sub 2}V{sub 4}O{sub 13}. This compound is stable up to 635 {sup o}C and peritectically decomposes to orthorhombic CrVO{sub 4} and V{sub 2}O{sub 5} above this temperature. A possible long range antiferromagnetic ordering below 10 K is suggested from the squid magnetometry and electron paramagnetic resonance (epr) spectroscopic studies of Cr{sub 2}V{sub 4}O{sub 13}. -- Graphical abstract: A tetravanadate of chromium (Cr{sub 2}V{sub 4}O{sub 13}) is prepared characterized in detail. The crystal structure of this compound is formed by the U shaped V{sub 4}O{sub 13} (tetravanadates) and Cr{sub 2}O{sub 10} (dimer) units. Display Omitted

36 MATERIALS SCIENCE↗

Valence State Driven Site Preference in the Quaternary Compound Ca5MgAgGe5: An Electron-Deficient Phase with Optimized Bonding

The quaternary phase Ca5Mg0.95Ag1.05(1)Ge5 (3) was synthesized by high-temperature solid-state techniques, and its crystal structure was determined by single-crystal diffraction methods in the orthorhombic space group Pnma – Wyckoff sequence c12 with a = 23.1481(4) Å, b = 4.4736(1) Å, c = 11.0128(2) Å, V = 1140.43(4) Å3, Z = 4. The crystal structure can be described as linear intergrowths of slabs cut from the CaGe (CrB-type) and the CaMGe (TiNiSi-type; M = Mg, Ag) structures. Hence, 3 is a hettotype of the hitherto missing n = 3 member of the structure series with the general formula R2+nT2X2+n, previously described with n = 1, 2, and 4. The member with n = 3 was predicted in the space group Cmcm – Wyckoff sequence f5c2. The experimental space group Pnma (in the nonstandard setting Pmcn) corresponds to a klassengleiche symmetry reduction of index two of the predicted space group Cmcm. This transition originates from the switching of one Ge and one Ag position in the TiNiSi-related slab, a process that triggers an uncoupling of each of the five 8f sites in Cmcm into two 4c sites in Pnma. The Mg/Ag site preference was investigated using VASP calculations and revealed a remarkable example of an intermetallic compound for which the electrostatic valency principle is a critical structure-directing force. The compound is deficient by one valence electron according to the Zintl concept, but LMTO electronic structure calculations indicate electronic stabilization and overall bonding optimization in the polyanionic network. Other stability factors beyond the Zintl concept that may account for the electronic stabilization are discussed.

36 MATERIALS SCIENCE↗

TH-C-17A-04: Shining Light On the Implementation of Cherenkov Emission in Radiation Therapy

Purpose: We hypothesize that Cherenkov emission (CE) by radiotherapy beams is correlated with radiation dose, CE detection can be maximized by a spectral shift towards the near-infrared (NIR) window of biological tissue, and in certain tissue types (ex. breast/oropharynx), it could prove superior to mega-voltage (MV) imaging. Therefore, we compare CE imaging to onboard MV imaging. Methods: Dose-CE correlation was investigated via simulation and experiment. A Monte Carlo (MC) CE simulator was designed using Geant4. Experimental phantoms include: water; tissuesimulating phantom composed of water, fat emulsion, and beef blood; plastic phantom with solid water insert. The optical spectrometry system consisted of a multi-mode optical fiber and diffraction-grating spectrometer incorporating a front/back-illuminated charge-coupled device (CCD). CdSe/ZnS quantum dots (QDs), emitting at (650±10) nm, were used to achieve NIR shift of the CE signal. CE and MV images were acquired with a complementary metal-oxide-semiconductor (CMOS) camera and an electronic portal imaging device (EPID), respectively. Results: MC and experimental studies indicate a strong linear correlation between radiation dose and CE (Pearson coefficient > 0.99). CE by an 18 MeV beam was effectively shifted towards the NIR in water and in a tissue-simulating phantom, exhibiting a 50% increase at 650 nm for QD depths of ∼3 mm. CE images exhibited relative contrast superior to EPID images by a factor of 30. Conclusion: Our work supports the potential for application of CE in radiotherapy online imaging for patient setup and treatment verification, since CE is intrinsic to the beam and non-ionizing, and QDs can be used to improve CE detectability, yielding image quality superior to MV imaging for the case of low density variability, low optical attenuation materials, such as breast or oropharyngeal cavities. Ongoing work involves microenvironment functionalization of QDs and application of multichannel spectrometry for simultaneous acquisition of dosimetric and tumor oxygenation signals. Funding received from the following organizations: Natural Sciences and Engineering Research Council of Canada, McGill University. YZ acknowledges partial support by the CREATE Medical Physics Research Training Network grant of the Natural Sciences and Engineering Research Council (Grant number: 432290)

07 ISOTOPE AND RADIATION SOURCES↗

Reduced diffusion and enhanced retention of multiple radionuclides from pore structure characterization of barrier materials for enhanced repository performance

Fluid flow and chemical transport in porous media are the macroscopic consequences of pore structure, which integrates geometry (e.g., pore size and surface area, pore-size distribution) and topology (e.g., pore connectivity). Low-permeability geological media whose pores are poorly interconnected will exhibit the characteristics of anomalous diffusion and sample size-dependent effective porosity, which will strongly impact long-term net diffusion and retention of radionuclides in geological repository settings involving different host rocks and barrier materials. A suite of innovative and complementary experimental approaches is utilized to study the microscopic pore structure and macroscopic fluid flow & chemical transport for a range of host rocks and barrier materials, in addition to standard clay minerals and reference rocks. With a particular focus on quantifying the presence and magnitude of “isolated” pores for a reduced effective porosity in low-permeability geomedia, the integrated methodologies for basic properties and pore structure characterization of these geomedia include X-ray diffraction, thin section petrography, grain size distribution, water immersion porosimetry after vacuum-pulling for full saturation, mercury intrusion porosimetry, nitrogen physisorption, scanning electron microscopy, X-ray computed tomography, and (ultra-)small angle neutron (X-ray) scattering. In addition, custom-designed gas diffusion, tracer recipe involving a range of anionic and cationic chemicals with subsequent analyses by laser ablation and inductively coupled plasma-mass spectrometry, along with batch sorption, column transport, and imbibition tests were conducted for coupled effects of pore structure and chemical retention/transport. From the perspectives of pore structure in conjunction with multiple and complementary approaches to examining a range of sample sizes under different observational scales, we find that the poor pore connectivity is prevalent in low-permeability media (mudstone and crystalline rock) that is related to geological processes (e.g., compaction, diagenesis and thermal maturation). For example, the deep and organic matter-rich mudstones have a much smaller effective porosity than the total porosity (as a result of poor pore connectivity) and associated diffusion coefficient, and the effective porosity & diffusion coefficients are also dependent upon the sample sizes used in the measurement. Similarly, most of the pore space in the shallow mudstone is also controlled by pore-throat diameters in the 5-50 nm range of intergranular pore types from its fine-grained nature, but with an overall good pore connectivity. However, the nm-sized pore space (physically pore-network architecture) and strong sorption capacities (chemical retention from clay minerals) of both shallow and deep mudstones lead to the synergistic retention of cationic radionuclides and their utilities as effective host rocks and barrier materials. Our unique approaches of studying how the micro-scale pore structure affect macro-scale fluid flow, diffusion & retention, and chemical transport produce improved mechanistic understanding, and realistic quantification, of diffusion and retention of typical radionuclides in a range of generic host rocks and barrier materials (clay/shale, salt, crystalline rock, and tuff), with the overall results leading to scientifically-based understanding of enhanced isolation (from both diffusion and retention) of radionuclides and improved confidence on the long-term performance of geological repository to store high-level radioactive wastes. In addition to the training of 25 undergraduates, graduates, and postdocs of UTA, the scientists (organizations) involved in performing this work (e.g., discussion, sample sharing, and operation of SANS and SAXS instruments) include Ed Matteo, Yifeng Wang, and Kristopher Kuhlman (Sandia National Laboratories), Jens Birkholzer, Liange Zheng, Tim Kneafsey, and Sharon Borglin (Lawrence Berkeley National Laboratory), Mavrik Zavarin (Lawrence Livermore National Laboratory), Yukio Tachi and Yuta Fukatsu (Japan Atomic Energy Agency), Mieke de Craen (Euridice, Belgium), Markus Bleuel (NIST), Wei-Ren Chen, Gergely Nagy, Changwoo Do, William Heller, Larry Anovitz, and Kenneth Littrell (ORNL), as well as Jan Illvsky, Ivan Kuzmenko, Ju-Sang Park and Jon Almers (ANL). Key deliverables include a total of 13 peer-reviewed journal articles (nine published and three under review), 23 presentations at scientific conferences (AAPG, AAPG Southwest Section, AGU, Asian Clay Conference, GSA, GSA South-Central Section, IHLRWM, InterPore, International Conference on Chemistry and Migration Behavior of Actinides and Fission Products in the Geosphere, International Conference on Coupled Processes in Fractured Geological Media: Observation, Modeling and Application), and academic institutions (UTA, New Mexico State University; University of Poitiers, France; University of Helsinki, Finland; Uppsala University, Sweden; Istanbul Technical University, Turkey) and other organizations (Andra, France; Posiva Oy, Finland).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of Sm2O3 addition on Judd-Ofelt parameters, thermal and optical properties of the TeO2-Li2O-ZnO-Nb2O5 glass system

Highlights: • Synthesis of Sm{sub 2}O{sub 3} doped TeO{sub 2}-Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} glass to be used in optical devices. • Area under the peak calculations of FTIR and Raman display higher presence of BOs. • DSC plots indicate high stability and high rigidity of prepared glass samples. • Judd-Ofelt analysis shows the ionic nature of Sm{sup 3+} ions with neighboring atoms. • Higher branching ratio values obtained from {sup 6}H{sub 5/2} → {sup 6}F{sub 5/2} emission transition. - Abstract: A series of transparent and light yellow color samples composed of Sm{sub 2}O{sub 3} doped tellurium oxide glasses with chemical composition 75TeO{sub 2}-5Li{sub 2}O-10ZnO-(10-X) Nb{sub 2}O{sub 5}-XSm{sub 2}O{sub 3} was prepared by conventional melt-quenching technique. Rare earth (Sm{sub 2}O{sub 3}) was added to improve all glass properties. From obtained radiative properties, the samples which prepared with above composition can be considered as a prospect application for laser design due to higher branching ratio. The physical properties including sample density, molar volume, and OPD were measured. The glassy nature is approved by XRD analysis. The structural modification of glass forming units with introducing Sm{sub 2}O{sub 3} was studied by FTIR and Raman spectra. The intensity ratio of TeO{sub 4}/TeO{sub 3} was measured to determine the ratio of bridging/non-bridging oxygen exists in glass network. Glass thermal stability, glass transition temperature, and melting temperature were obtained from DSC plots. The UV–vis-NIR absorption spectra display 9 peaks. Optical parameters including optical band gap E{sub Opt}, Urbach energy ΔE and refractive index n were determined. From absorption spectra, Judd-Ofelt intensity parameters (Ω{sub λ} and λ = 2, 4, 6) have been derived to study bonding nature. A spectroscopic quality factor was calculated. Branching ratio (β{sub r}) and lifetime (τ) have been calculated using JO parameters. Absorption and emission cross-sections were determined to measure the probability of an absorption or emission process. Finally, we propose that these prepared samples can be used in optical devices and other applications.

36 MATERIALS SCIENCE↗

Site Dependency of the High Conductivity of Ga 2 In 6 Sn 2 O 16 : The Role of the 7-Coordinate Site

The 6-coordinated cation site is the fundamental building block of the most effective transparent conducting oxides. Ga2In6Sn2O16, however, maintains 4-, 6-, 7-, and 8-coordinated cation sites and still exhibits desirable transparency and high conductivity. To investigate the potential impact of these alternative sites, we partially replace the Sn in Ga2In6Sn2O16 with Ti, Zr, or Hf and use a combined approach of DFT-based calculations, X-ray diffraction, and neutron diffraction to establish that the substitution occurs preferentially on the 7-coordinate site. In contrast to Sn, the empty d orbitals of Ti, Zr, and Hf promote spd covalency with the surrounding oxygen which decreases the conductivity. Pairing the substitutional site preference with the magnitude of this decrease demonstrates that the 7-coordinate site is the major contributor to the conductivity. The optical band gaps, in contrast, are shown to be site independent and composition dependent. Continued replacement of Sn after all 7-coordinate Sn has been substituted results in the formation of a 7-coordinate In antisite or replacement of 6-coordinate Sn, depending on the identity of the d0 substitute.

36 MATERIALS SCIENCE↗

Complex long-range magnetic ordering in the Mn-bearing dugganite Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14}

Spin liquids, multiferroics, and doubly-chiral helical structures are just some of the exotic magnetic states found in the langasite compounds. A subclass of the langasite group, the Te{sup 6+}-containing dugganites, has also shown exotic magnetism including magnetoelectric coupling, coexisting complex long-ranged ordered structures, and low-field induced magnetic transitions. Here, we present the first detailed structural study of Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14} as well as the first neutron scattering measurements. This material undergoes long-range magnetic ordering, similar to the multiferroic Ba{sub 3}NbFe{sub 3}Si{sub 2}O{sub 14}, at T{sub N}=6.6 K, which is consistent with previous magnetization measurements. However unlike any other langasite or dugganite studied to date, we present evidence of a large, pseudohexagonal incommensurate supercell that alters the nuclear and magnetic structures away from the langasite ideal. - Graphical abstract: Two geometrically frustrated cationic substructures of the langasites and dugganites have profound effects on the magnetism of these compounds. In Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14}, Mn{sup 2+} (S=5/2) isolated trinuclear units are shown in yellow, while the red distorted kagomé network is nonmagnetic. (For interpretation of the references to color the reader is referred to the web version of this article.) Highlights: • Polycrystalline Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14} was prepared. • Found evidence of a large, pseudohexagonal supercell that is incommensurate with the subcell. • Long-range antiferromagnetic ordering is observed below T{sub N}=6.6 K similar to Ba{sub 3}NbFe{sub 3}Si{sub 2}O{sub 14}. • Broken symmetry probably causes magnetic peak splitting in this system.

36 MATERIALS SCIENCE↗

Corrosion behavior of Monofrax K-3 refractory in borosilicate-based model low activity waste glass melts

Owing to its good chemical and thermal durabilities at high temperatures, Monofrax K-3 refractory is widely used in nuclear waste vitrification as a lining material in melting vessels. However, the corrosion of K-3 refractory during the vitrification of nuclear waste is a serious problem because it affects the melter's safety, performance, and lifetime. Therefore, in the present study, we have focused on unearthing the impact of glass network formers, such as SiO 2 , B 2 O 3 , and Al 2 O 3 , in a model nuclear waste glass composition on the corrosion of Monofrax K-3 refractory. The corrosion tests have been performed per ASTM C621 at 1150°C for 5 days. The dimensional measurements on corroded K-3 refractory suggest that Al 2 O 3 and SiO 2 tend to reduce the refractory corrosion (neck loss), with the effect of Al 2 O 3 being significant. A corroded region on the K-3 refractory at the melt–refractory interface is observed. The corrosion occurs via a coupling of the melt infiltration induced by a capillary effect and the dissolution of Al, Mg, and Fe components from K-3 into the melt through chemical reactions. A Cr-rich layer is retained on the glass contact surface of the corroded K-3 refractory.

36 MATERIALS SCIENCE↗

Design of Experiment for the Measurement of Aerosol Droplet Size Distribution of Temperature-Controlled Thermally Atomized Printed Electronic Inks

In-Space Manufacturing (ISM) centers around NASA’s growing need and ability to produce space technologies on demand in space. As the future of long term presence in space and deep space exploration approach, fundamental questions of our dependence on earth resupply to Low Earth Orbit (LEO) remain unanswered. ISM is leading various effort to evaluate the feasibility of producing essential spares and redundant parts on demand to enable a sustainable space-based supply chain model for part resupply. Among the parts and systems being considered, Avionics form the neural network of modern day aircraft and space vehicles providing a wealth of information ranging from Guidance, Navigation, and Control (GN&C) systems to on board Environmental Control and Life Support (ECLS) systems. Recent advances in the use of Aerosol Jet Technology to print Avionics components ranging from electrical traces on a circuit board to complex transistors and sensors raise the possibility of using such technology to reproduce or recreate electronic parts on demand with the help of custom electronics 3D printers. The challenge herein lies within the ability of such printers to generate and deposit an aerosol of electronic material utilizing processes independent of or enhanced by gravity to ensure controllably identical or improved behavior of the aerosol in an International Space Station (ISS) laboratory and on the ground. The behavior as well as the hazards and properties associated with such aerosols in a microgravity environment must be understood well in order to merit a feasible approach to utilizing them for manufacturing in space. In this report, we outline the experimental setup of a modified conventional vaping device to be used as the ideal gravity independent thermal atomization mechanism to generate aerosol. Our objective is to identify the ideal mass, density, and volume of our aerosolized droplets of ink to conclude that there exist a threshold of aerosolized ink droplet sizes that are indeed independent of the effects of gravity and remain stable after atomization. We use a Malvern Spraytec® Spray Particle Size Analyzer to perform real-time laser diffraction measurement of our ink droplets during atomization. The droplet size between conductive ink, dielectric ink and vegetable glycerin have been measured and contrasted. Furthermore, the mechanism of thermal atomization versus traditional pneumatic and ultrasonic atomization for operation in microgravity have been explored.

Wu, Chih-Hao↗

Morphology and structure features of ZnAl{sub 2}O{sub 4} spinel nanoparticles prepared by matrix-isolation-assisted calcination

Graphical abstract: The substrate ZnO as the isolation medium is effective in preventing the sintering and agglomeration of ZnAl{sub 2}O{sub 4} nanoparticles, and it also prevents their contamination. High purity, well-dispersed, and single-crystal ZnAl{sub 2}O{sub 4} nanoparticles with 3.72 eV band gap were obtained. - Abstract: Well-dispersed ZnAl{sub 2}O{sub 4} spinel nanoparticles with an average crystalline size of 25.7 nm were synthesized successfully and easily by polymer-network and matrix-isolation-assisted calcination. The product microstructure and features were investigated by X-ray diffractometry, thermogravimetric and differential thermal analysis, Fourier transform-infrared spectroscopy, N{sub 2} adsorption–desorption isotherms, and energy dispersive X-ray spectra. The morphology and optical performance of the as-prepared ZnAl{sub 2}O{sub 4} nanoparticles were characterized by scanning electron microscope, transmission electron microscopy, and photoluminescence spectrometer. Experimental results indicate that excess ZnO acted as the isolation medium is effective in preventing the sintering and agglomeration of ZnAl{sub 2}O{sub 4} nanoparticles, and it also prevents their contamination. Then, high purity and well-dispersed ZnAl{sub 2}O{sub 4} nanoparticles with single-crystal structure were obtained.

36 MATERIALS SCIENCE↗

Annealing influence on the Gilbert damping parameter and the exchange constant of CoFeB thin films

We present a study of the influence of the annealing temperature T{sub a} on the magnetic properties of Co{sub 40}Fe{sub 40}B{sub 20} thin films. Using a vector network analyzer ferromagnetic resonance (VNA-FMR) setup and the magneto-optical Kerr effect, the dependence of the Gilbert damping parameter α, the exchange constant A, the saturation magnetization as well as the coercive field and the Kerr signal on T{sub a} is reported. Additionally, the correlation with the crystalline properties of the films studied by X-ray diffractometry is discussed. We found that while the damping parameter α and the coercive field show sharp changes starting at a certain T{sub a} value, the exchange constant A and the Kerr signal show a steady evolution. A differential modification of the film surface compared to the bulk is discussed as a possible reason. In any case, we found that the low damping values are preserved at the first onset of crystallization.

36 MATERIALS SCIENCE↗

Free-Space Optical Communication for CubeSats in Low Lunar Orbit (LLO)

The NASA ARTEMIS Program will include LunaNet, a highly extensible, open architecture, lunar communications and navigation network. A constellation of CubeSats in Low Lunar Orbit (LLO), 100 km, could form an optical communications and navigation network as part of LunaNet, with terminals on the lunar surface, including mobile ones such as with astronauts and rovers. The proposed CubeSat nodes should provide data relay and navigational aid services. The proposed effort herein is to develop a fine pointing capability for laser beam pointing to augment body pointing by CubeSats. Body pointing was used by Aerospace Corporation for the CubeSats in LEO in NASA’s Optical Communications and Sensors Demonstration (OCSD) program [1]. Previously, this fine pointing capability was computer simulated for the OCSD program [2,3]. With fine pointing, the spot size on the Earth was reduced by a factor of eight with a reduction in laser output power by a factor of sixty-four, thereby mitigating the thermal load challenge on the CubeSats. The same reductions in spot size and laser output power can be achieved for CubeSats in LLO. A new method is described for optical data transmissions from satellites, which uses laser arrays for laser beam pointing. It combines a lens system and an array of vertical-cavity, surface-emitting lasers and photodetectors, an VCSEL/Photodetector Array, (both mature technologies), in a novel way. This system is applied to CubeSats in low lunar orbit, (LLO), which use body pointing. Also, It may be able to replace current architectures which use dynamical systems, (i.e., moving parts) to point the laser, and which may also use vibration isolation platforms. The computer simulations used the optics code, OpticStudio, from Zemax, LLC, which has the capabilities to model the laser source and diffraction effects from wave optics. These capabilities make it possible to model laser beam propagation over long space communication distances.

Goorjian, P. M.↗

Solvent-dependent luminescent Cu(I) framework based on 5-(4-pyridyl)tetrazole

A new Cu(IOTA) coordination compound, Cu{sub 4}(L){sub 4}.2EtOH (1), has been obtained from the solvothermal reaction of CuBr, HL (L=5-(4-pyridyl) tetrazole), EtOH and NH{sub 3}.H{sub 2}O. The structure determination reveals that 1 has a 2D network, where each Cu(I) atom adopts a trigonal coordination mode. The 2D networks stacked in an ABAB sequence through the pi-pi interaction to form a 3D supramolecular framework, giving a 1D channel along the b-axis. The TGA and powder XRD measurements reveal that the framework is stable after removal of the guest molecules. Gas (N{sub 2}) adsorption measurement was carried out for the framework. Framework 1 shows II sorption profile with N{sub 2}, which indicates that N{sub 2} molecules cannot diffuse into the micropore and only surface adsorption occurs. The photoluminescent research shows that compound 1 displays an interesting solvent-dependent luminescence. - Abstract: A new Cu(I) compound, Cu{sub 4}(L){sub 4}.2EtOH (1) (L=5-(4-pyridyl) tetrazole), was synthesized under solvothermal method, which displays an interesting solvent-dependent luminescence. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical and photoluminensce properties of Eu{sup 2+}-activated strontium magnesium silicate phosphors using different rare earth co-activators

Nanostructured powders of Sr{sub 1.96}MgSi{sub 2}O{sub 7}:Eu{sub 0.01}{sup 2+}, R{sub 0.01}{sup 3+} (R{sup 3+ }= Er{sup 3+}, Tm{sup 3+} and Tb{sup 3+}) have been fabricated via urea combustion technique. XRD results implied that tetragonal Sr{sub 2}MgSi{sub 2}O{sub 7} was the major phase whereas monoclinic Sr{sub 2}SiO{sub 4} and SrSiO{sub 3} were the minor phases. Meanwhile, field emission SEM textures showed the hollow spherical network-like shape structures filled with fused interconnections for the Sr{sub 1.96}MgSi{sub 2}O{sub 7}:Eu{sub 0.01}{sup 2+} sample. It has been recognized that the replacement of Sr{sup 2+} with co-dopant R{sup 3+} ions e.g. Er{sup 3+}, Tm{sup 3+} and Tb{sup 3+} considerably help obtaining homogeneous structure as well. The values of band gap energy and calculated refractive index were ultimately dependant on the ionic radius of R{sup 3+} co-doping ion. It has been suggested that the divalent activator ion (Eu{sup 2+}) was responsible for the number of PL emission spectra, while the trivalent co-activator ions (R{sup 3+}) were the key reasons for variations in the broadening and intensity of PL emission spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multiple Nonstoichiometric Phases with Discrete Composition Ranges in the CaAu 5 -CaAu 4 Bi-BiAu 2 System. A Case Study of the Chemistry of Spinodal Decomposition

Synthetic explorations in the CaAu 5 -CaAu 4 Bi-BiAu 2 system at 400 °C reveal five separate solid solution regions that show three distinct substitution patterns in the CaAu 5 parent: (I) CaAu 4 (Au 1-m Bi m ) with 0 ≤ m ≤ 0.15(1), (II) 0.33(1) ≤ m ≤ 0.64(1), (III) 0.85(4) ≤ m ≤ 0.90(2); (IV) (Ca 1-r Au r )Au 4 (Bi 1-s Au s ) with 0 ≤ r ≤ 0.39(1) and 0 ≤ s ≤ 0.12(2); (V) (Ca 1-p-q Au p Bi q )Au 4 Bi with 0.09(2) ≤ p ≤ 0.13(1) and 0.31(2) ≤ q ≤ 0.72(4). Single crystal X-ray studies establish that all of these phase regions have common cubic symmetry F43m and that their structures (MgCu 4 Sn-type, an ordered derivative of MgCu 2 ) all feature three-dimensional networks of Au 4 tetrahedra, in which the truncated tetrahedra are centered and capped by Ca/Au, Au/Bi, or Ca/Au/Bi mixtures to give 16-atom Friauf polyhedra. TB-LMTO-ASA and -COHP calculations also reveal that direct interactions between Ca-Au and Ca-Bi pairs of atoms are relatively weak and that the Bi-Au interactions in the unstable ideal CaAu 4 Bi are antibonding in character at E F but that their bonding is optimized at ±1 e. Compositions between the five nonstoichiometric phases appear to undergo spinodal decompositions. The last phenomenon has been confirmed by HRTEM, STEM-HAADF, EPMA, and XRD studies of the nominal composition CaAu 4.25 Bi 0.75 . In conclusion, its DTA analyses suggest that the phases resulting from spinodal decomposition have nearly the same melting point (~807 °C), as expected, and that they are interconvertible through peritectic reactions at ~717 °C.

36 MATERIALS SCIENCE↗

Removal of Congo Red from Aqueous Solution by Hydroxyapatite Nanoparticles Loaded on Zein as an Efficient and Green Adsorbent: Response Surface Methodology and Artificial Neural Network-Genetic Algorithm

This study is based on the application of hydroxyapatite nanoparticles loaded on Zein (Zein/nHAp) as an efficient adsorbent for the removal of Congo red from aqueous solutions. The properties of the adsorbent were characterized using various techniques including FT-IR, XRD, FE-SEM, and BET. The influence of five parameters such as pH, temperature, contact time, initial dye concentration, and adsorbent dosage on the removal percentage of the dye was investigated. The optimum conditions of 5.83, 34.32 °C, 5.20 min, 392.10 ppm, and 0.007 g were achieved for pH, temperature, contact time, initial dye concentration, and adsorbent dosage, respectively. The maximum removal percentage of 99.48% was obtained under the optimum condition that exhibited high adsorption potential of the used adsorbent. Central composite design (CCD) under response surface methodology and artificial neural network-genetic algorithm (ANN-GA) were utilized for optimization of parameters. Comparison of the results of the two models in terms of coefficient of determination (R{sup 2}) and mean absolute percentage error confirmed the prediction potential of CCD and ANN-GA. Higher ability and accuracy of ANN-GA in prediction was found based on given results. The experimental equilibrium data were studied by Langmuir, Freundlich, Temkin and Dubinin-Radushkevic isotherm models and explored that the data well presented by Langmuir model with maximum adsorption capacity of 416.66 mg/g. The adsorption kinetic was well-fitted by the pseudo-second-order model. The thermodynamics of the adsorption displayed spontaneous and endothermic nature of the process. Regeneration investigation showed that Zein/nHAp can impressively be reused, indicating that the adsorbent was a promising one for the removal of Congo red from aqueous solution. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗