Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffractive computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

High-Resolution Infrared Studies of Perdeutero-Spiropentane, C 5 D 8

Perdeutero-spiropentane (C 5 D 8 ) has been synthesized and infrared and Raman spectra are reported for the first time. Wavenumber assignments are made for most of the fundamental vibrational modes. Gas phase infrared spectra were recorded at a resolution (0.002 cm -1 ) sufficient to resolve individual rovibrational lines and show evidence of strong Coriolis and/or Fermi resonance interactions for most bands. However a detailed rovibrational analysis of the fundamental v 15 (b 2 ) parallel band proved possible and a fit of more than 1600 lines yielded a band origin of 1053.84465(10) cm -1 and ground state constants (in units of cm -1 ): B 0 = 0.1120700(9), D J = 1.51(3) x10 -8 , D JK = 3.42(15) x10 -8 . We note that the B 0 value is significantly less than a value of Ba = 0.1140 cm-1 calculated using structural parameters from an earlier electron diffraction (ED) study, whereas one expects B a to be lower than B 0 because of thermal averaging over higher vibrational levels. A similar discrepancy was noted in an earlier study of C 5 H 8 [1]. The structural and spectroscopic results are in good accord with values computed at the anharmonic level using the B3LYP density functional method with a cc-pVTZ basis set.

C5H8 and C5D8↗

Interdiffusion and Formation of Intermetallic Compounds in High-Temperature Power Electronics Substrate Joints Fabricated by Transient Liquid Phase Bonding

Power electronics packages typically comprise a dielectric substrate bonded to a metal layer and attached to heat sinks using a low-thermal-conductivity solder. These multiple layers increase the effective thermal resistance of the package and are responsible for package failures under cyclic thermal loads. Bonding the aluminum nitride dielectric layer (AlN) directly to a low coefficient of thermal expansion (CTE) aluminum silicon carbide (AlSiC) cold plate using copper-aluminum (Cu-Al) transient liquid phase (TLP) bonding has been shown to improve the mechanical reliability of the power electronic packages while making the package more compact by bringing the cooling solutions closer to the devices. This study aims to characterize the Cu-Al bonds formed during the TLP bonding of AlSiC with three different power electronics substrates: pure aluminum nitride (AlN), aluminum (DBA), and copper (DBC). The material compositions and microstructures of the bonds were analyzed using scanning electron microscopy (SEM), x-ray spectroscopy (EDS), confocal scanning acoustic microscopy (C-SAM), and x-ray diffraction (XRD). ..alpha..-Al solid compound was identified as the dominant phase in AlN-AlSiC and Al-AlSiC, with a notable presence of SiC particles. In contrast, three intermetallic phases - ..theta..-CuAl2, ..eta..-CuAl, and ..gamma..'- Cu9Al4 - were observed in the Cu-AlSiC bond. A computational solid-state diffusion model was developed to predict the intermetallic compounds (IMCs) formed during Cu-Al TLP bonding in each system, which supported the observation that an initial Cu volume fraction of 20 % in the material layers produced a final bond composition of >95 % Al with minimal IMC growth. However, increased Cu concentrations produced higher concentration gradients, leading to increased growth of IMCs, Kirkendall voids, and interstitial cracks.

DIRECT ENERGY CONVERSION↗

Probing atomic-scale symmetry breaking by rotationally invariant machine learning of multidimensional electron scattering

Abstract The 4D scanning transmission electron microscopy (STEM) method maps the structure and functionality of solids on the atomic scale, yielding information-rich data sets describing the interatomic electric and magnetic fields, structural and electronic order parameters, and other symmetry breaking distortions. A critical bottleneck is the dearth of analytical tools that can reduce complex 4D-STEM data to physically relevant descriptors. We propose an approach for the systematic exploration of 4D-STEM data using rotationally invariant variational autoencoders (rrVAE), which disentangle the general rotation of the object from other latent representations. The implementation of purely rotational rrVAE is discussed as are applications to simulated data for graphene and zincblende structures. The rrVAE analysis of experimental 4D-STEM data of defects in graphene is illustrated and compared to the classical center-of-mass analysis. This approach is universal for probing symmetry-breaking phenomena in complex systems and can be implemented for a broad range of diffraction methods.

36 MATERIALS SCIENCE↗

Development and operation of a high-throughput accurate-wavelength lens-based spectrometer

A high-throughput spectrometer for the 400–820 nm wavelength range has been developed for charge exchange recombination spectroscopy or general spectroscopy. A large 2160 mm{sup −1} grating is matched with fast f/1.8 200 mm lenses, which provide stigmatic imaging. A precision optical encoder measures the grating angle with an accuracy ≤0.075 arc sec. A high quantum efficiency low-etaloning CCD detector allows operation at longer wavelengths. A patch panel allows input fibers to interface with interchangeable fiber holders that attach to a kinematic mount at the entrance slit. Computer-controlled hardware allows automated control of wavelength, timing, f-number, automated data collection, and wavelength calibration.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance Optimization for Hard X-ray Microscopy Beamlines Guided by Partially-Coherent Wavefront Propagation Calculations

Hard x-ray range synchrotron radiation still remains only partially coherent even for ultra-low emittance third-generation sources, such as NSLS-II. On the other hand, many of the scientific goals targeted by new advanced hard x-ray microscopy beamlines--e.g. development of scanning microscopy with nanometer-scale spatial resolution or coherent diffraction imaging microscopy--require high degree of transverse coherence and high radiation flux at a sample. Detailed quantitative prediction of partially-coherent x-ray beam properties at propagation from an undulator, along a beamline with a number of optical elements, can only be obtained from accurate physical-optics based numerical simulations. We present an example of such simulations performed for the NSLS-II Hard x-ray Nanoprobe beamline using ''Synchrotron Radiation Workshop''(SRW) computer code. In addition to tracking of intensity distributions at different locations of the beamline, we include numerical experiments with a two-slit interference scheme into our analysis, in order to characterize transverse coherence of the resulting wavefront. The wavefront propagation method which has been used offers high flexibility in the beamline optimization, allowing to choose optical element parameters for different types of microscopy experiments.

43 PARTICLE ACCELERATORS↗

Mechanism of Low-Temperature Reduction Degradation of Alumina-Containing Hematite Solid Solution Below 550 °C

Low-temperature reduction degradation (LTRD) of sinter has an adverse effect on blast furnace permeability, and it is mainly caused by the stress produced in the reduction process of hematite. This stress is strongly influenced by alumina dissolved in hematite crystal lattice. In this work, the experiments were conducted to investigate the effect of alumina dissolved in hematite solid solution (H{sub ss}) on LTRD by reducing H{sub ss} below 550 °C. Thermogravimetric analysis (TGA), X-ray diffraction (XRD), and optical microscope have been used to characterize the mass change and mineral change of samples, respectively. Jade software has been used to calculate the micro strain in magnetite for quantitatively studying the change of strain in reducing process. The results show that alumina was unfavorable to the reduction of H{sub ss} on thermodynamics, and the starting reduction temperature of H{sub ss} containing 6.0 mol pct alumina was 28 °C higher than that of pure hematite. According to the calculation on kinetics, the generation rate of stress was accelerated by dissolving alumina into hematite crystal lattice. The apparent activation energy of reduction reaction lowered from 47.89 to 28.07 kJ/mol with the increase of alumina content from 0.0 to 6.0 mol pct. The addition of alumina also increased the stress in the reduction products, and this stress was released in the form of LTRD.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-scale Modeling of Plasticity in Tantalum.

In this report, we present a multi-scale computational model to simulate plastic deformation of tantalum and validating experiments. In atomistic/ dislocation level, dislocation kink- pair theory is used to formulate temperature and strain rate dependent constitutive equations. The kink-pair theory is calibrated to available data from single crystal experiments to produce accurate and convenient constitutive laws. The model is then implemented into a BCC crystal plasticity finite element method (CP-FEM) model to predict temperature and strain rate dependent yield stresses of single and polycrystalline tantalum and compared with existing experimental data from the literature. Furthermore, classical continuum constitutive models describing temperature and strain rate dependent flow behaviors are fit to the yield stresses obtained from the CP-FEM polycrystal predictions. The model is then used to conduct hydro- dynamic simulations of Taylor cylinder impact test and compared with experiments. In order to validate the proposed tantalum CP-FEM model with experiments, we introduce a method for quantitative comparison of CP-FEM models with various experimental techniques. To mitigate the effects of unknown subsurface microstructure, tantalum tensile specimens with a pseudo-two-dimensional grain structure and grain sizes on the order of millimeters are used. A technique combining an electron back scatter diffraction (EBSD) and high resolution digital image correlation (HR-DIC) is used to measure the texture and sub-grain strain fields upon uniaxial tensile loading at various applied strains. Deformed specimens are also analyzed with optical profilometry measurements to obtain out-of- plane strain fields. These high resolution measurements are directly compared with large-scale CP-FEM predictions. This computational method directly links fundamental dislocation physics to plastic deformations in the grain-scale and to the engineering-scale applications. Furthermore, direct and quantitative comparisons between experimental measurements and simulation show that the proposed model accurately captures plasticity in deformation of polycrystalline tantalum.

36 MATERIALS SCIENCE↗

Structural variability in Cu(I) and Ag(I) coordination polymers with a flexible dithione ligand: Synthesis, crystal structure, microbiological and theoretical studies

Two new compounds namely [Cu(SCN)(µ-L)]{sub n} (1) and ([Ag (µ{sub 2}-L)](ClO{sub 4})){sub n} (2) have been synthesized at room temperature by one-pot reactions between the 1,1-(1,4-butanediyl)bis(1,3-dihydro-3-methyl-1H-imidazole- 2-thione) (L) and appropriate copper(I) and silver(I) salts. These polymers have been characterized by single crystal X-ray diffraction, XRPD, TGA, elemental analysis, infrared spectroscopy, antibacterial activity and scanning probe microscopy studies. In the crystal structure of 1, copper atoms have a distorted trigonal planar geometry with a CuS{sub 2}N coordination environment. Each of the ligands in the structure of 1 acting as a bidentate S-bridging ligand to form a 1D chain structure. Additionally, the adjacent 1D chains are interconnected by the intermolecular C-H…S interactions to create a 2D network structure. In contrast to 1, in the cationic 3D structure of 2 each of the silver atoms exhibits an AgS{sub 4} tetrahedral geometry with 4-membered Ag{sub 2}S{sub 2} rings. In the structure of 2, the flexible ligand adopts two different conformations; gauche-anti-gauche and anti-anti-anti. The antibacterial studies of these polymers showed that polymer 2 is more potent antibacterial agent than 1. Scanning probe microscopy (SPM) study of the treated bacteria was carried out to investigate the structural changes cause by the interactions between the polymers and target bacteria. Theoretical study of polymer 1 investigated by the DFT calculations indicates that observed transitions at 266 nm and 302 nm in the UV–vis spectrum could be attributed to the π→π* and MLCT transitions, respectively. - Graphical abstract: Two new Cu(I) and Ag(I) coordination polymers have been have been synthesized by one-pot reactions. Copper complex has a 2D non-covalent structure, but silver compound is a 3D coordination compound. These compounds have effective antibacterial activity. - Highlights: • Cu(I) and Ag(I) based coordination polymers have different network structures. • Ag(I) polymer has more antibacterial activity than Cu(I) polymer. • DFT calculations of Cu(I) polymer has been investigated. • Cu(I) and Ag(I) polymers can destroy the structure of chromosomal and plasmid DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design, Processing, and Properties of WTaCrV-Hf Multi-principal Element Alloys

Refractory multi-principal element alloys are candidates for high-temperature structural components due, in part, to their high strength and high melting points. Single-phase materials are initially preferred for isotropic material properties as a function of time and temperature in service conditions. This work outlines a computational rank-ordering and experimental validation methodology for single-phase body-centered-cubic phase stability in WTaCrV-Hf alloys using order–disorder transition temperature. Eight compositions were fabricated by arc-melting and heat-treated at 1400 °C for 24 hrs. X-ray diffraction, energy-dispersive x-ray spectroscopy, and Vickers hardness testing showed alloys with order–disorder transition temperatures below 600 °C formed a single-phase body-centered-cubic structure during solidification and remained single-phase after heat-treatment. The sample possessing the lowest order–disorder transition temperature exhibited slip traces suggestive of room-temperature plastic deformation under Vickers indentation, with both heat-treated single-phase samples exhibiting hardnesses over 800 HV with little cracking compared to tungsten. These results establish order–disorder transition temperature as a viable predictive parameter for multi-principal element alloy phase stability. The methodology outlined in this work provides a framework for future design, fabrication, and characterization of high-temperature structural multi-principal element alloys.

CALPHAD↗

Effect of Lithium Doping on MgO Hydroxylation and Carbonation

Recovery of magnesium from brines can potentially be used to source MgO (periclase) as a CO 2 sorbent or for Mg-based cements. However, it is not clear how common impurities in brines, such as lithium, affect the resulting MgO reactivity. Here, to test the effect of lithium incorporation on MgO reactivity for hydration and carbonation, we combined computational simulations with experiments. Experimentally altered (Mg,Li)O with a low dopant concentration (0.012 ± 0.002% w/w Li) was characterized using synchrotron-based X-ray scattering and high-resolution electron microscopy to measure reaction layer formation on (Mg,Li)O. Single-crystal X-ray diffraction analysis of (Mg,Li)O demonstrates that the incorporation of lithium leads to the formation of oxygen vacancies. The presence of vacancies is likely causing faster hydroxylation rates as predicted by ab initio molecular dynamics simulations. However, the faster hydroxylation rates likely lead to faster passivation of the surface because we observe thinner reaction layers on (Mg,Li)O samples both over short time periods (30 days) and over long time periods (28 years). After 28 years, the reaction layer on the (Mg,Li)O sample was less than one-third of the thickness of that of the pure MgO sample. In addition, over 30 days, reaction layers on (Mg,Li)O samples primarily formed at steps rather than on terraces, in contrast to our previous observations on MgO. Based on our results, naturally occurring impurities in MgO modify its reactivity even at very low concentrations and need to be considered for accurate reaction rate prediction for application of MgO as a CO 2 sorbent or in cements.

MgO↗

Mutually guided light and particle beam propagation

The polarizability of atoms and molecules gives rise to optical forces that trap particles and a refractive index that guides light beams, potentially leading to a self-guided laser and particle beam propagation. In this paper, the mutual interactions between an expanding particle beam and a diffracting light beam are investigated using an axisymmetric particle-light coupled simulation. The nonlinear coupling between particles and photons is dependent on the particle beam radius, particle density, particle velocity and temperature, polarizability, light beam waist, light frequency (with respect to the resonance frequency), and light intensity. The computational results show that the maximum propagation distance is achieved when the waveguiding effect is optimized to single-mode operation. The application of the coupled beam propagation as a space propulsion system is discussed.

42 ENGINEERING↗

bnl/pub-Maffettone_2020_08

The application of the XCA package as first demonstrated in aXiv:2008.00283. ABSTRACT: The discovery of new structural and functional materials is driven by phase identification, often using X-ray diffraction (XRD). Automation has accelerated the rate of XRD measurements, greatly outpacing XRD analysis techniques that remain manual, time consuming, error prone, and impossible to scale. With the advent of autonomous robotic scientists or self-driving labs, contemporary techniques prohibit the integration of XRD. Here, we describe a computer program for the autonomous characterization of XRD data, driven by artificial intelligence (AI), for the discovery of new materials. Starting from structural databases, we train an ensemble model using a physically accurate synthetic dataset, which output probabilistic classifications --- rather than absolutes --- to overcome the overconfidence in traditional neural networks. This AI agent behaves as a companion to the researcher, improving accuracy and offering unprecedented time savings, and is demonstrated on a diverse set of organic and inorganic materials challenges. This innovation is directly applicable to inverse design approaches, robotic discovery systems, and can be immediately considered for other forms of characterization such as spectroscopy and the pair distribution function.

Maffettone, PhillipM [Brookhaven National Lab. (BN↗

Alkyl Chain Length and Temperature Effects on Structural Properties of Pyrrolidinium-Based Ionic Liquids: A Combined Atomistic Simulation and Small-Angle X-ray Scattering Study.

Molecular dynamics (MD) simulations of 1-alkyl-1-methylpyrrolidinium 12 bis(trifluoromethanesulfonyl)imide ([CnMPy][Tf2N], n = 3, 4, 6, 8, 10) were conducted 13 using an all-atom model. Radial distribution functions (RDF) were computed and structure 14 functions were generated to compare with new X-ray scattering experimental results, 15 reported herein. The scattering peaks in the structure functions generally shift to lower Q 16 values with increased temperature for all the liquids in this series. However, the first sharp 17 diffraction peak (FSDP) in the longer alkyl chain liquids displays a marked shift to higher Q 18 values with increasing temperature. Alkyl chain-dependent ordering of the polar groups and 19 increased tail aggregation with increasing alkyl chain length were observed in the partial pair 20 correlation functions and the structure functions. The reasons for the observed alkyl chain- 21 dependent phenomena and temperature effects were explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron Neutrino Charged-Current Quasielastic Scattering in the MINERvA Experiment

The electron-neutrino charged-current quasielastic (CCQE) cross section on nuclei is an important input parameter for electron neutrino appearance oscillation experiments. Current experiments typically begin with the muon neutrino cross section and apply theoretical corrections to obtain a prediction for the electron neutrino cross section. However, at present no experimental verification of the estimates for this channel at an energy scale appropriate to such experiments exists. We present the cross sections for a CCQE-like process determined using the MINERvA detector, which are the first measurements of any exclusive reaction in few-GeV electron neutrino interactions. The result is given as differential cross-sections vs. the electron energy, electron angle, and square of the four-momentum transferred to the nucleus, $Q^{2}$. We also compute the ratio to a muon neutrino cross-section in $Q^{2}$ from MINERvA. We find satisfactory agreement between these measurements and the predictions of the GENIE generator. We furthermore report on a photon-like background unpredicted by the generator which we interpret as neutral-coherent diffractive scattering from hydrogen.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

From deep TLS validation to ensembles of atomic models built from elemental motions

Procedures are described for extracting the vibration and libration parameters corresponding to a given set of TLS matrices and their simultaneous validation. Knowledge of these parameters allows the generation of structural ensembles corresponding to these matrices. The translation–libration–screw model first introduced by Cruickshank, Schomaker and Trueblood describes the concerted motions of atomic groups. Using TLS models can improve the agreement between calculated and experimental diffraction data. Because the T, L and S matrices describe a combination of atomic vibrations and librations, TLS models can also potentially shed light on molecular mechanisms involving correlated motions. However, this use of TLS models in mechanistic studies is hampered by the difficulties in translating the results of refinement into molecular movement or a structural ensemble. To convert the matrices into a constituent molecular movement, the matrix elements must satisfy several conditions. Refining the T, L and S matrix elements as independent parameters without taking these conditions into account may result in matrices that do not represent concerted molecular movements. Here, a mathematical framework and the computational tools to analyze TLS matrices, resulting in either explicit decomposition into descriptions of the underlying motions or a report of broken conditions, are described. The description of valid underlying motions can then be output as a structural ensemble. All methods are implemented as part of the PHENIX project.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of a coherent soft x-ray beamline for coherent scattering experiments at NSLS-II

The coherent soft x-ray and full polarization control (CSX) beamline at the National Synchrotron Light Source - II (NSLS-II) will deliver 1013 coherent photons per second in the energy range of 0.2-2 keV with a resolving power of 2000. The source, a dual elliptically polarizing undulator (EPU), and beamline optics should be optimized to deliver the highest possible coherent flux in a 10-30 {micro}m spot for use in coherent scattering experiments. Using the computer code Synchrotron Radiation Workshop (SRW), we simulate the photon source and focusing optics in order to investigate the conditions which provide the highest usable coherent intensity on the sample. In particular, we find that an intermediate phasing magnet is needed to correct for the relative phase between the two EPUs and that the optimum phase setting produces a spectrum in which the desired wavelength is slightly red-shifted thus requiring a larger aperture than originally anticipated. This setting is distinct from that which produces an on-axis spectrum similar to a single long undulator. Furthermore, partial coherence calculations, utilizing a multiple electron approach, indicate that a high degree of spatial coherence is still obtained at the sample location when such an aperture is used. The aperture size which maximizes the signal-to-noise ratio of a double-slit experiment is explored. This combination of high coherence and intensity is ideally suited for x-ray ptychography experiments which reconstruct the scattering density from micro-diffraction patterns. This technique is briefly reviewed and the effects on the image quality of proximity to the beamline focus are explored.

36 MATERIALS SCIENCE↗

Inducing multiple functionalities in ZnS nanoparticles by doping Ni{sup +2} ions

Graphical abstract: Figure shows spherical ZnS nanoparticle (light red) containing Ni as dopant ions (light green inside) exhibiting both optical (straight lines) as well as magnetic (elliptical field lines) activities simultaneously. Highlights: ► A simple method has been adopted to synthesize Ni{sup +2} doped ZnS nanoparticles. ► The enhancing and quenching of the PL intensity depended upon ‘purity of the phase’. ► The change in packing of the molecules in ZnS NPs directly depended on concentration of dopant. ► Magnetic and optical properties were found to be dopant dependent (e.g. Ni{sup +2} ions). ► Proper choice of solvent for synthesis shows a marked effect on magnetism. - Abstract: In this study, we propose that it is possible to induce multiple functionalities such as optical activity, electrical conductance and magnetism in single ZnS/Ni nanoparticles and exploit the same by only changing the external stimuli such as magnetic field, wavelength of light, electric field etc. Such type of material finds great significance in the field of electronics as well as in bioimaging. For the purpose, we have synthesized cubic ZnS:Ni{sup 2+} nanoparticles (NPs) using a simple wet-chemical method. Synthesized ZnS:Ni{sup 2+} NPs had been characterized by X-ray diffraction pattern (XRD) and energy dispersive X-ray (EDX) analysis. The amounts of Ni and Zn in the material were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Morphology of the NPs is studied by transmission electron microscopy (TEM). Optical studies are carried out using UV–visible (UV–Vis) and Photoluminescence (PL) spectroscopies. Quantum efficiency of the material was also computed. The enhancement and quenching of the PL intensity are correlated with the ‘purity of the phase’. It is observed that change in packing of the molecules of the host material directly depended on concentration of dopant ion. The thermal study of the material was carried out using differential scanning calorimetry (DSC) to support the earlier proposition. Magnetic hysteresis behavior was studied using vibrating sample magnetometer (VSM). An interesting phenomenon of defect-induced magnetism was observed, which was enhanced on doping with Ni{sup +2}.

36 MATERIALS SCIENCE↗

Phosphinoborane-induced fragmentation of the unsaturated hydride H2Re2(CO)8

The reactivity of the unsaturated dimer H{sub 2}Re{sub 2}(CO){sub 8} (1) with the ambiphilic phosphinoborane Ph{sub 2}PCH{sub 2}CH{sub 2}BR{sub 2} (2; where BR{sub 2} = 9-borabicyclo[3.3.1]nonanyl) has been explored. Coordination of the ambiphilic ligand to 1 is rapid at room temperature, leading to the fragmentation of 1 and formation of HRe(CO){sub 4}({kappa}B,P-Ph{sub 2}PCH{sub 2}CH{sub 2}BR{sub 2}) (3) in high yield. 3 has been characterized in solution by IR and NMR spectroscopy, and the molecular structure established by X-ray diffraction analysis. The solid-state structure confirms the presence of a chelated phosphinoborane ligand through coordination of the phosphine to the rhenium center and the formation of a three-center, two-electron (3c,2e) Re-H-B interaction. The nature of the Re-H-B interaction in 3 has been investigated by DFT, and the energetics for borane dissociation and hydride abstraction by the coordinated Lewis acid in 3 have also been computationally evaluated. The coordination of an oxygen in one of the ancillary CO groups by the pendant borane in HRe(CO){sub 4}({kappa}P-Ph{sub 2}PCH{sub 2}CH{sub 2}BR{sub 2}) is thermodynamically unfavorable relative to the formation of the 3c,2e Re-H-B bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗